REPAIR/MENTENANCE OF TOILET, SANITARY FITTINGS AND ALLIED WORKS UNDER AGE BR-II AT BABINA CANTT

Amount

Dismantling floor/hearth or wall tiling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15 thick cement mortar screed bed 1:4 complete all as specified and as directed

M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15 thick cement mortar screed bed 1:4 complete all as specified and as directed

M&L glazed ceramic colour tiles 300mmx450mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:4, complete all as specified and directed

M&L glazed ceramic colour tiles 300mmx200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:3, complete all as specified and directed

Taking up or down existing steel tubing 15 mm bore and including connections etc complete all as specified and as directed.

Taking up or down existing steel tubing 20 mm bore and including connections etc complete and as directed.

Supply and fixing, jointing and testing galvanised iron tubing 15 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

Supply and fixing, jointing and testing galvanised iron tubing 20 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

S/F in repair of stop valves, cast copper alloy screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20mm dia complete all as specified and directed.

S&F in repair 15 mm bore stop valve (angle cock two in one) cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union and fixed complete all as specified and as directed.

S&F in repair 15mm bore bib taps cast copper alloy fancy type chromium plated screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repair 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed.

S&F vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S and F in repair of Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) in repair including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets, 32mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed

S&F 15mm dia pillar taps cast copper alloy with capstan heads, cromium plated screwed down high pressure with or without lettered Hot or Cold with long screw shanks abd fly -nuts screwed for iron pipe and fixed

S&F brass CP mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed complete all as specified and directed.

S&F PVC floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointingcomplete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and directed.

S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet with PVC doors etc complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and directed.

S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.

Dismantling of PVC or AC drain pipe jointed in cement mortar of size 100mm bore complete all as specified and directed.

S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal 110 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm complete all as specified and directed.

S and F of Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S and F of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed.

S & F in repair of Towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S and F of Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed.

Taking down cement plaster on brick/concrete or stone walls etc incl racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed.

M&Lfor rendering 10 mm thick CM (1:4) on concrete/brick surfaces on wall etc incl finishing the surface even and smooth complete all as specified and directed.

M and L for repairing of RCC projection, chajja, facia, column etc by necessary preparation (i.e. scraping, cutting, chiseling, dusting and cleaning exposed reinforcement surface of damaged/ loose surface and applying one coat of cement slurry and filling the surface with plain cement concrete (1:1.5:3) reinforced with welded mesh and make good by15mm thick plaster with cm (1:4) and including scaffolding/formwork etc upto double storey height complete all as specified and directed by engineer in charge.

M & L for applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface complete all as specified and as directed.

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete.

M&L Brick work with old size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping and on roof etc complete all as specified and as directed.

Demolition and breaking of drain pipe (salt glazed stoneware) 200mm dia set in cement mortar including packing under and haunching against side of pipe omplete all as specified and as directed.

Demolition and breaking of drain pipe (salt glazed stoneware) 150mm dia set in cement mortar including packing under and haunching against side of pipe omplete all as specified and as directed.

Supplying, laying, jointing and testing salt glazed stone ware drain pipe 200mm dia grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed

Supplying, laying, jointing and testing salt glazed stone ware drain pipe 150mm dia grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed

M & L cement concrete bed to drain pipe 200mm dia including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and as directed.

M & L cement concrete bed to drain pipe 150mm dia including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and as directed.

M & L PCC 1:3:6 type C-1 using 20 mm graded store aggregate as in coping/surface channel /drains complete all as specified and as directed.

Demolition of cement concrete (reinforced) in ground floors and paving n. exc 15 cm thickness below or above ground level complete all as specified and as directed.

M&L precast re-inforced Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for man holes etc set in cement mortar 1:6 including necessary form work complete all as specified and directed

M&L for TMT bars 6 mm to 8 mm dia, cut to length, bent to shape reqd, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Description same as per above, but exceeding 1.5 M and not exceeding 3.0M in depth and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.

Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed.

Taking down old existing unserviceable HDPE water storage tank(PVC/RCC and of capacity n exc 500 ltrs etc complete all as specified and directed.

Taking down old existing unserviceable HDPE water storage tank (PVC/RCC) and of capacity exc 500 ltrs but n exc 1000 ltrs complete all as specified and directed.

S&F 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.

S & F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe 20 mm dia and fixed in new tank (minimum weight 20mm 210 gm) complete all as specified and directed.

S&F in repair of 25mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms 20mm-210gms /25mm-455gms/40mm-690gms complete all as specified and as directed.

S&F of 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms 20mm-210gms /25mm-455gms/40mm-690gms complete all as specified and as directed.

M/S Chadha Brothers

gomti construction

Ms Vinay constructions

M/S PRAKASH RAIKWAR TRADERS AND CO