Loading
Loading…
Loading…
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
9 Sept 2026, 6:00 pm
GE (AF) BKT
GE (AF) BKT, LUCKNOW
REPAIR/ MAINT OF PUMPING SETS AND CONNECTED WORKS AND ESSENTIAL REPAIR OF E/M SERVICES AT INDAURABAGH AND TRU AT AF STN BKT
2026_MES_785478_1
8910/BKT/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BKT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (AF) BKT
₹60,000
20 Aug 2026
20 Aug 2026
12 Sept 2026
20 Aug 2026
9 Sept 2026
3 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for dismantling of submersible pumping set of capacity 1 HP to 3 HP installed at various location in (AF) Stn BKT , and carrying out necessary repairs to pump and motor, reassembling after replacement of Bowels, impellers, thrust bearing plate, sand gaurd, submersible cable upto 6 mtr length, bushes, refilling/remetalling of motor shaft, nut bolts etc and testing to entire satisfaction of Engr-in-Charge and complete all as specified and directed.
(Note:- 1. All Spare parts required will be included in quoted rate except rewinding of motor).
2. Cost of Transportation (if required) shall deemed to be included in quoted unit rate | 6 | Each Job | - | - |
| 2 | Labour only Cutting out the existing winding from stator of submersible motor against item No 1 and M&L for rewinding of submersible motor with exisitng size of copper wire including varnishing etc complete all as specified and directed. | 6 | Each Job | - | - |
| 3 | M&L for dismantling of submersible pumping set of capacity 15 HP to 30 HP installed at various location in (AF) Stn BKT , and carrying out necessary repairs to pump and motor, painting of pumping set, reassembling after replacement of following items & jobs and testing to entire satisfaction of Engr-in-Charge and complete all as specified and directed.
(Note:- 1. Spare parts required will be measured & paid separately here in after.
2. Cost of Transportation (if required) shall deemed to be included in quoted unit rate) | 4 | Each Job | - | - |
| 4 | Labour only Cutting out the existing winding of stator of submersible motor of 15 to 30 HP,three phase and M&L for rewinding with PVC copper wire of existing size complete including varnishing, supply & replacement of minor items like cable grommet, water seal, studs with nuts, sand guard, sleeves in end plates, submersible cable upto 6 mtr length, straightening of the slot etc complete all as specified and directed. | 4 | Each Job | - | - |
| 5 | Supply only Thurst bearing block complete of submersible motor of existing make complete all as specified and directed.. | 4 | Each | - | - |
| 6 | Supply only housing Bushes of submersible motor as per manufracture's design and specification complete all as specified and directed.. | 15 | Each | - | - |
| 7 | Supply only Remetaling of motor shaft,turning to bring it to original size and shape and polishing for submersible motor complete all as specified and directed. | 4 | Each Job | - | - |
| 8 | Supply only Coupling of submersiable motor and pump with key complete all as specified and directed. | 4 | Each | - | - |
| 9 | Supply only Complete overhauling of submersible pump and replacement. complete all as specified and directed. | 4 | Each Job | - | - |
| 10 | Supply only Bowel bushes complete all as specified and directed. | 36 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
8910tenderdocuments.pdf
Tender Documents • 1.25 MB
BOQ_880163.xls
BOQ • 0.74 MB
8910credit.pdf
Additional Documents • 0.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].