CERTAIN REPAIR TO JOINERY IN MD ACCN AT MIL STN PATIALA UNDER GE (SOUTH) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm each complete all as specified and directed.

Supply and fixing factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet , reinforced with steel square tube including hold fasts and making good the disturbed surfaces as per existing specifications complete all as specified and directed.

S&F Factory Made Solid penal PVC Door Shutter 30mm thick (style) consisting of frame made out of ms tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC C chennal having a PVC sheet strip of 20mm width stuck inside with solvent cement forstiles and plain colour PVC sheet for top rail,lock rail& bottom rail on either side and as gap inseerted for top rail and bottom rail, penelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVXC sheet beading ,and joined together with solvent cement, supplying and fixing in the frame at sites complete all as specified and directed. (a) Butt Hinges SS 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified.

S&F15- 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F15- 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed.

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified and directed.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200 mm long matt finished complete fixed in position all as specified and directed.

S&F in repair CP towel rail 20mm dia, 60cm long complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm and n. exc. 2 sqm each complete all as specified and directed.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd to disturbed surfaces complete inday shape for hold fast block for new frame complete all as specified and directed, incl sanding ,tarring to backside and chawkhat and to holdfasts and incl cement 1:2:4 type B-1 using 20mm graded stone aggregate as in holdfasts blocks/filling in chawkhats and making good to disturbed surfaces

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd to disturbed surfaces complete inday shape for hold fast block for new frame complete all as specified and directed, incl sanding ,tarring to backside and chawkhat and to holdfasts cement 1:2:4 type B-1 using 20mm graded stone aggregate as in holdfasts blocks/filling in chawkhats and making good to disturbed surfaces

S&F factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to complete all as specified and directed

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and complete all as specified and directed, including the supply and fixing following items:

S&F Aluminium anodised tower bolt of 200mm extruded section and fixed all as specified and directed

S&F Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf complete all as specified and directed

S&F Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf complete all as specified and directed

S&F Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf complete all as specified and directed

S&F 300mm, mild steel ordinary rat tail rod(helical type) pattern springs including roller and roller plate complete all as specified and directed.

M & L for Providing and fixing factory made extruded aluminium with or without casement windows (with or without provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified and directed including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. (d) Powder coated aluminium hook and key -1 nos per leaf Note: complete window portion shall be double shutter incl casement window portion. for measurement purpose complete window shall be taken as one unit

M&L for Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beed 20mm size with and complete all as specified and directed.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect complete as specified and directed.

M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified and directed as in repair. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

S&F Framed work such as grills, cooler stands gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for preparing steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in spare not exceeding 0.5 sqm in each pane as in repair complete all as specified and directed.

M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in spare exceeding 0.5 sqm in each pane as in repair complete all as specified and directed.

Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 complete all as specified and as directed. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh & painting shall be included in quoted rates

S&F floor door stopper 150mm of aluminium alloy body and tounge ,anodised,with hard drwan steel spring, fixed in repair complete all as specified and directed.

Steel windows or ventilators, fixedtype, with glazing bars complete all as specified and as directed.

M&L for stainless steel steel wire cloth 0.36mm nominal dia of wire and average width of apertutre 1.40mm fixed in repair and complete all as specified and directed.

Buttar Construction Co.

Arneja Builders

AR CONSTRUCTIONS

DELTA CONSTRUCTION CO

M/S Mukesh Kumar Gupta

SWAMI ENGINEERS

HARJIT CONTRACTS