REPAIRS TO COMPOUND WALL, FENCING, GATES AND ROLLING SHUTTERS AND CONNECTED WORKS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

Demolition of brick or stone/ boulder built in cement mortar complete all as specified and as directed.

Material and labour brick work with fly ash bricks straight or curved on plan exceeding 6 M mean radius built in CM 1:4 etc Complete all as specified and as directed

All as per item above but except bricks (serviceable bricks obtained out of dismantling shall be made use of) Complete all as specified and as directed

Material & labour walling of random rubble masonry uncoursed, well bonded, bedded and solidly hearted in cement mortar 1:6 etc Complete all as specified and as directed

All as per item above but except stones (serviceable stone obtained from dismantling shall be made use of under this item) complete all as specified and as directed

Material and labour PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in copings completed all as specified and as directed

Labour only for Raking out joints/ pointing to random rubble uncoursed/ coursed or brought up to courses built in cement mortar completed all as specified and as directed

M & L for raised pointing/ rubbed / V pointing to random or polygonal rubble, coursed or brought upto courses in cement mortar 1:4 complete all as specified and as directed

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed

Dismantiling of mild steel work of any description not other wise provided for completed all as specified and as directed.

S&F MS Angle/ flate iron/chanel framed work such as iron gate, ladder, SWT frame, grills, gratings, framed guard bars, etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165 completed all as specified and as directed

Dismantling expanded metal, chain link fencing or mesh any type or thickness not exc , fixed with steel or wood fillets, if any completed all as specified and as directed

S&F welded steel wire fabric to angle iron frame not exc 4 Kg weight per square metre completed all as specified and as directed

Dismantling fencing post/struts (steel/ RCC/wooden) of any section including taking out embedded portion and making good disturbed ground, post embedded in cement concrete/natural ground Complete all as specified and as directed

Material & labour for MS angle iron conforming to Fe- 290(Gde E 165) as in fencing post Complete all as specified and as directed

M&L for Two coats of synthetic enamel paint over one coat of red oxide including preparation surface Complete all as specified and as directed

M&L preparing steel and iron surfaces of any description n.exc 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer all as specified & directed by the Engr-in-Charge.

Excavating in post holes in hard/dense soil not exc. 0.50 cum and getting out, return filling and removing surplus soil to a distance not exc. 50 mtrs and making good disturbed ground Complete all as specified and as directed

Material & labour for PCC 1:2:4 type B2 ( using 40 mm graded aggregate) for angle iron post Complete all as specified and as directed

Supply ony Chain link of size MS galvanised fencing any size or type Complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard, rails, straining bolts etc., including provision of binding wire Complete all as specified and as directed

Material & labour for Mild steel round bars 10 mm dia and over, cut to length, bent to required shape including cranking, hooking ends and securing with welding with 10 cm overlaping between two bar all as specified and directed by Engineer-in Charge as in in reinforcement.

Material & labour for Flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 290(Gde E 165) Complete all as specified and as directed

Supply & fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n exc 10cm long and dia of neck 11 to 15 mm Complete all as specified and as directed

S & F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 90mm to 110mm spacing and straing and fixing to any type of standard rails straining bolts, incluing securing or typing a crossings with an provision of galvanize mild steel wire, staples or steel pins, etc all as directed (each line wire to be measured) in repairs completed all as specified and as directed

Fixing only in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 90mm to 110mm spacing and straing and fixing to any type of standard rails straining bolts, incluing securing or typing a crossings with an provision of galvanize mild steel wire, staples or steel pins, etc all as directed (each line wire to be measured) in repairs completed all as specified and as directed

S&F in repairs Concertina coils super barbed bladed profile of dia 450 mm of and wt of coil for 50 spiral turns shall not be less than 9.0 kg and one coil (50 spiral) shall not be stretched to more than 6.0 mt. blade shall be 0.50mm th galvanised steel strip and 2.5mm dia core wire fixed to angle iron brackets or masonry surfaces with necessary accessories like straining wires, fixing clips etc complete all as specified and as directed by Engineer-in-charge

Demolition of cement concrete (unreinforced) of any description and in any position and disposed off to a distance exc. 50 mtrs and not exc. 250 mtrs all as directed by EIC.

M&L hard core of gauge n. exc 63 mm deposited, spread , traveled in layer, waters, water and rammed to a true surface complete all as specified and as directed

M&L PCC 1:3:6, type C-1 (40 mm graded agg ) for plinth protection 75 mm thick, finished without using extra cement complete all as specified and as directed

Dismantling of stone slabs of any description or thickness in floors and approns etc, laid ,bedded and pointed in any mortar all as specified and directed.

M&L sand filling under floors of interlocking tiles including watering and consolidation complete all as specified and as directed

M&L machine pressed precast concrete with grey cement and pigment interlocking paver block any shape and size confirming to IS-15658- 2006 of 50 to 60 mm thickness M-40 grade with gray cement complete all as specified and as directed

M&L PCC 1:4:8, type D-2 (40 mm graded agg) for sub base of floor 75 mm thick complete all as specified and as directed

M&L PCC 1:2:4, type B-0 (12.50 mm graded agg) for 40 mm thick in floor complete all as specified and as directed

M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying of floor finish complete all as specified and as directed

M&L Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and no pigment set ionted and pointed in neat cement slurry colour to match in floors complete all as specified and as directed

M&L PCC 1:2:4, type B1 (40 mm graded agg) for 75 mm thick path/ flooring without using extra cement complete all as specified and as directed

Removing excavated material/soils / Debris to a distance exc. 500 mtrs and not exc.1500 mtrs, depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and as directed

M&L for broken glass coping on top of walls in cement mortar 1:3 complete all as specified and directed completed all as specified and as directed

M&L for Providing servicing/ greasing to Steel rolling shutters where ever directed and specified, servicing/ greasing to all parts of a rolling shutter including guide channels, hood covers, gear rods, laths, lock rails, bearings, chains and other connected parts of all types of rolling shutterts, taking down the rolling shutter in any postion and any type where ever directed by Engineer In charge and caaryout the repairs/ servicing / greasing and making into smooth operational condition as directed by Engineer In charge, top cover, anchoring rod, hasp and staple erected in same position or any other openings as indicated and as directed, in repairs complete all as specified and as directed

M&L for Steel rolling shutters, Thickness of laths 1mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, in repairs complete: push pull or manual type complete all as specified and as directed

M&L for Safety lever locks mild steel with 4 levers for rolling shutters in repairs complete: push pull or manual type complete all as specified and as directed

M&L for Ball bearing for rolling shutters in repairs complete: push pull or manual type complete all as specified and as directed

M&L sand filling (river sand) including watering and consolidation in firing range complete all as specified and as directed

M&L for filling saw dust as directed by engineer in charge and complete filling in stop butt areas including removal of existing material/ filling in stop butt complete all as specified and directed. Note: River sand shall be measured and paid separetely under relevant item. Saw dust shall be mixed with river sand in proportion as directed.

M & L for excavation upto 600mm depth of existing sand and saw dust mix in Small Arm Range area and screening with proper size of screener to remove the complete foreign material and placing the screened sand and saw dust mix obtained from excavation including levelling and compaction complete all as specified and as directed

M & L in repair providing pre cast cement concrete louvres and jallies, 35mm thick (measured solid) Type BO (1:2:4), (12.5mm graded stone aggregate) set in CM 1:4 , complete all as specified and directed

AMK Builders (BID ID -3067728)

G SATISH REDDY AND CO (BID ID -3068667)

VACON INFRASTRUCTURES (BID ID -3069139)

M/S DIVIJA BUILDERS (BID ID -3079917)

M/S P.SWAROOP KUMAR (BID ID -3079188)

Sri Surya Enterprises (BID ID -3074736)

M/s D.Krishna Varma (BID ID -3068239)