WELCOME MAINT OF EM SERVICES FOR OMQ, SQM AREA AND OTHER EM RELATED WORK FOR DIFFERENT LOCATIONS UNDER GE (MCTE) MHOW

Amount

Repairs/ Overhauling of Old Existing LT Building indoor/ outdoor Panel/ Distributions boards and repairs/ replacement of glass view for reading of volt/ Amp/ CT's meter and providing rubber/ PVC gasket, lugs of suitable size all sides of door by welding including preparation of old rusted surfaces and applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces by spraying including nut bolts, lock, filling cavities with filler, cleaning all dust etc. and writing Qtr Numbers (Like as A, B, C, D) in black paint with skilled painter, complete all as specified and directed.

S&F for energy efficient exhaust fan having duty of 300mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including taking down old unsv fan and deposit the same in the AGE E/M-III store complete all as specified and directed.

S&F for energy efficient exhaust fan havey duty of 450mm sweep as per site requirement made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including taking down old unsv fand and deposit the same in the AGE E/M-III store complete all as specified and directed.

S&F for energy efficient exhaust fan havey duty of 380mm sweep as per site requirement made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including taking down old unsv fand and deposit the same in the AGE E/M-III store complete all as specified and directed.

S&F ceiling fans complete with blades, down rods 15mm/ 12mm upto two mtr, run with electronic regulator or remote with battery and complete accessories, 230 V, 50Hz, 1200mm sweep and rated power 26W (+ 10%) and rate speed 350 RPM (+ 10%) Min air delivery 210 CFM with service value shall not be less than 8.00 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including taking down old unsv fans and deposit the same in the MES store complete all as specified and directed.

Supply & fix electric wall fan of 400mm sweep, 230 Volts single phase, white in colour, complete with all accessories like nuts, bolts, clamps etc and connection from ceiling rose including taking down old unsv fand and deposit the same in the AGE E/M-III store complete all as specified and directed.

S&F for Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary mounting arrangements and provision of 2.5 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts including taking down old unsv complete all as specified and directed.

Supply and fix in repairs LED tube light fittings 1 x 9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of pvc square boxes complete all as specified and directed.

S&F for energy saving recess/ surface mounted luminaire 36/ 40/ 42W, high efficiency PMMA diffuser gives soft glare free light, suitable for 600 x 600 ceiling cut out, recess mounted 36W LED luminaire in MS housing (2' x 2') incl Provn of three core cable of copper conductor of size 1.5 Sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on ceiling including cutting, grooving with proper finish and making good, disturbed surface with all fixing arrangement including taking down old u/s complete all as specified and directed.

Supply & fix LED Bulk Head luminaire 10W, 6000K pressure die cast housing with IP65 protection complete with electric connection & all necessary fixing arrangement including taking down old u/s complete all as specified and directed.

Supply & fix Recessed/ surface mounted LED panel slim, compact, aluminium die castedge lite panel of 15 W, round/ square as per site requirement with premium diffuser to ensure glare free & even distribution of light complete with electric connection including taking down old u/s complete all as specified and directed.

S&F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including taking down old u/s complete all as specified and directed.

Supply and fix in repair inverter LED bulb of 09 watt of base B-22, suitable for fixing in lamp holder complete all as specified and directed.

Supply & fix surface mounted round/ Square as per site requirement, LED panel of 12W to 16 W with premium diffuser to ensure glare free & even distribution of light complete with electric connection including taking down old u/s complete all as specified and directed.

Supply and fix in repair of LED 9 watt, BGSBL 9W WW LED Bush light, spun aluminium graphite grey powder coated housing with PDC bottom and die cast aluminium alloy spigot Luminous flux 540lm, Luminaire efficacy 60lm/W operation temperature range -10 degree C to + 50 degree C, Electrical class-I surge protection 4KV IP 66, IK06 including connection with all necessary fixing accessories complete all as specified and directed.

S&F in repair of flexible Tricolor Strip light suitable for outdoor use IP 65/ 66, 220-240Volts AC supply, 18Meter length, 96 LED/M for uniform brightness, integral electronic LED Driver, surge protection 3.5KV, Operating temperature range -10 0 C to +450 C, luminous Flux 650lm/m, power 144W (18mtr roll) including all necessary arrangement for connecting the strip in the street light pole, suitable size of connector for the same complete all as specified and directed.

Supply and fix in repair of Wall light fittings suitable for LED bulb of 7 watt (B-22), polycarbonate/ opal glass as per site requirement including connection with all necessary fixing accessories complete all as specified and directed.

M & L for preparation of old painted/rusted surfaces of 1200/ 1400mm sweep ceiling fan and re-fixing the same after painting of the same with white colour synthetic enamel paint by spraying including filling cavities with filler & one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, complete all as specified and directed. Note:- All T&P and labour team as required will be provided by the contractor and cost deemed to be included in the quoted rate.

S&F flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of space for 125 Amps MCCB as incomer and SP/ SPN/ TP MCBs as out going, 4 way (Optium 1+12 Module) including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall, including taking down old u/s complete all as specified and directed.

S&Fixing in repair LED street light 90 Watt with Epoxy Polyster powder coated pressure die-cast aluminium housing, LEDs are provided with non-yellowing decorative IP lens optic, Silicon gaskets provided for LEDs and control gear compartments, The driver used is specially designed to have built-in surge voltage, open/ short circuit protections, External surge protection provided for additional safety, Side entry mounting for 55 to 65mm OD pipe bracket. ressure die-cast aluminium housing for aiming adjustment of 90 watt led street light with high power led lumnious efficacy 130 lm/watt, correlated color temperature 5665K ± 355K, luminous flux 11700 lm, CRI >70, Die cast aluminum body with pennut lens, Impact resistence 08, Ingress protection 66, Built surge protection 4kv and 10kv both will be inbulid in fixture only, Maintenance of lumen output will be minimum 50,000 hours as per L70B50 clause, Led Chip will be reputed brand only Osram, Cree, Nichee, Birgdelux, philips or authorisedonly, Power factor will be >0.95 not less than .95. Warranty certificate of LED fitting should be atleast 3 years and same should be produced to department through OEM directly. Any defects within warranty period will be rectified by contractor and earth connection of each light fitting should be connected to the system earth point either with 3 core cable or though seprate earth cable complete all as specified and directed.

All as per Srl item No. 20.00 above but capacity 60 Watts complete all as specified and directed.

S&F in repair of 120 watt led flood light Graphite grey powder coated; matt finished pressure die?cast aluminium housing designed to act as hea sink for efficient dissipation of heat, Heat resistant toughened glass provided with silicon gasket for efficient Ingress protection, LEDs are provided with secondary polycarbonate lens optics to get optimum optical performance,Constant current LED driver used is specially designed to have built-in surge voltage, open/short circuit protections.Luminaire is provided with a MS mounting bracket fixed on pressure die-cast aluminium housing for aiming adjustment of 200 watt led flood light with high power led lumnious efficacy 120 lm/ watt, correlated color temperature 5665K ± 355K, luminous flux 24000 lm, CRI >70, Die cast aluminum body with toughned glass along with pennut lens, Impact resistence 08, Ingress protection >66, Built surge protection 4kv and 10kv both will be inbulid in fixture only, Maintenance of lumen output will be minum 50,000 hours as per L70B50 clause, Led Chip will be reputed brand only Osram, Cree, Nichee, Birgdelux, philips only, Power factor will be >0.95 not less than .95. Warranty certificate of LED fitting should be atleast 5 years and same should be prodused to department through OEM directly. Any defects within warranty period will be rectified by contractor and earth connection of each light fitting should be connected to the system earth point either with 3 core cable or though seprate earth cable complete all as specified and directed.

S&F of TPN DB with provision for MCB TPN as incomer and SP MCBs as outgoing made of steel sheet phosphatised powder coated with bus bar, neutral link earth bar and DIN Rail having IP 42-IK 09 with metal door capacity 4-ways 415 V, connection with aluminium/ copper lugs including civil/ plastering work for make up good the disturbed surface matching with existing surface including taking down old u/s complete all as specified and directed.

S&F for MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for 100 to125 Amps rating, 16 KA breaking capacity including taking down old u/s complete all as specified and directed.

Supply and fix in repair double door SPN DBs 8 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed.

Supply and fix in repairs double door SPN DBs 4 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed.

S&F in repair MCB SPN 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugscomplete all as specified and directed.

S&F in repair MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed.

S&F in repair MCB triple pole & neutral 63 Amp, 415 volts, 'C' series' 10 KA breaking capacity & connection complete all as specified and directed.

S&F in repair PVC insulated flexible cable three core Copper conductor of size 1.50 Sqmm, ISI marked, covered with white colour round insulation complete all as specified and directed.

S & F in repair PVC insulated flexible cable three core Copper conductor of size 2.5 Sqmm, ISI marked, covered with white colour round insulation complete all as specified and directed.

S&F in repair PVC insulated flexible cable three core Copper conductor of size 4.00 Sqmm, ISI marked, covered with white colour round insulation complete all as specified and directed.

S&F in repair PVC twin core cable size 4mm complete all as specified and directed.

Supply & laying PVC twin core cable 6 Sqmm complete all as specified and directed

M&L for Point wiring with PVC insulated FRLSH, PVC unsheathed cable, single core, stranded, copper conductor cable 1.5 Sqmm size, 1100V grade, drawn into with and including PVC casing-capping/ existing/ concealed not less than 20mm wide, ISI marked, with 1.5 Sqmm unsheathed, stranded copper cable for continuous earth wire and including pressed steel concealed terminal boxes of suitable size made out of 1.2mm thick sheet covered with 2.6mm thick white hylam sheet cover of suitable size for mounting switches/ sockets/ fan regulators or Modular flush box for mounting modular switches/ sockets/ regulators etc including cutting chasing in wall and making good disturbed surface with existing colour complete all as specified and directed.

(a) One light/ fan/ bell point controlled by one switch

(b) One point for socket outlet 5 Amp on independent board

(c) One point for socket outlet 5 Amp same board

All as per Srl item No. 35.00 above, but with FRLSH cable 2.5 Sqmm stranded copper conductor FRLSH with 2.5 Sqmm copper conductor earth wire for switch/ socket outlet 5 pin,15 Amps multipurpose on independend board complete all as specified and directed.

S&F modular switch 1 way 6 A, 1 module complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular type 16 A, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body for surface type, 65 x 50mm three terminal complete all as specified and directed.

Supply & fix in repairs modular switch One-way 1-Module, 6 Amps, 230V AC complete all as specified and directed.

All as per Srl item No. 45.00 but 16 Amps complete all as specified and directed.

Supply & fix in repair modular socket 2/3 pin combined 6 Amp, 2 Module, complete all as specified and directed.

Supply & fix in repair modular socket 2/3 pin combined 6/16 Amp, 2 Module, complete all as specified and directed.

Supply & fix in repair modular bell push, flush type 6 Amp, 1-Module 220 V, complete all as specified and directed.

Supply and fix in repair switch piano flush type, 5 Amps, 230V AC, single pole, one way complete all as specified and directed.

Supply and fix in repair switch piano flush type 15 Amps, 230V AC single pole one way complete all as specified and directed.

Supply and fix in repair, switch piano flush type 05 Amps, 230V AC single pole Two-way complete all as specified and directed.

Supply and fix in repair socket out let multipurpose suitable for 2/3 pin 5 Amp flush type complete all as specified and directed.

Supply and fix in repair socket out let 2 IN 1, multipurpose suitable for 3 pin 5/15 amp flush type complete all as specified and directed.

Supply and fix in repair Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp, flush type universal as per site requirement complete all as specified and directed.

Supply and fix in repairs, angle type holder insulated body in white colour with back plate complete all as specified and directed.

Supply and fix in repairs bell push, flush type 5 Amp, 220 V, single pole complete all as specified and directed.

Supply and fix in repairs, electric bell, ding dong, AC, 220 V, single pole complete all as specified and directed.

Supply and fixing in repairs white finished single mounting modular plates suitable for modular accessories of following sizes complete all as specified and directed.

(a) Suitable for 1/2 modules, complete all as specified and directed.

(b) Suitable for 3 modules, complete all as specified and directed.

(c) Suitable for 4 modules, complete all as specified and directed.

(d) Suitable for 6 modules, complete all as specified and directed.

(e) Suitable for 8 horizontal modules, complete all as specified and directed.

Supply and fix in repairs sheet metal boxes concealed in wall suitable for housing modular accessories of following sizes complete all as specified and directed.

(a) Suitable for 1 or 2 modules 50mm, complete all as specified and directed.

(b) Suitable for 3 modules 50mm, complete all as specified and directed.

(c) Suitable for 4 modules 50mm, complete all as specified and directed.

(d) Suitable for 6 modules 50mm, complete all as specified and directed.

(e) Suitable for 8 modules 50mm, complete all as specified and directed.

S&F and testing of Energy efficient 5 Star BEE rating, electric geyser of 25 liters capacity with Fiber/ ceramic body with puff insulation inner tank ceramic with all in built safety accessories like thermo start/ automatic thermal cut out with ON/ OFF/ Cut out indications all pre wired and additional safety accessories like pressure release valve, non return valve in same or other position as ordered with the help of suitable suitable size of nuts & bolts making necessary electrical connection incl taking down and safe deposit of old unserviceable Geyser to E/M Store complete all as directed by Engr-in-charge.

Supply & Fix plastic body exhaust fan AC single phase 230/ 240 V of size 200mm sweep with louver, white in colour including duly connection with copper wire etc, including taking down and old unserviceable exaust fan deposit to E/M Store complete all as specified and directed.

Supply & Fix plastic body exhaust fan AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including duly connection with copper wire etc, including taking down and old unserviceable exaust fan deposit to E/M Store complete all as specified and directed.

M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 Sqmm for P and N and one run of earth and one run of PVC conduit will be measured as one unit.

All as per Srl item No. 74.00 here in before but using 4.0 Sqmm cable, complete all as specified and directed.

All as per Srl item No. 74.00 here in before but using 10.0 Sqmm cable, complete all as specified and directed.

Supply and fix electronic single phase meters temper proof LCD display with polycarbonate cover 230 V, 10-60 Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH incl taking down old unsv and deposit to MES store yard complete all as specified and directed.

Supply and fix electronic three phase meters temper proof LCD display with polycarbonate cover 230 V, 10-60 Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH incl taking down old unsv and deposit to MES store yard complete all as specified and directed.

Supply and fixing GI pipe light grade 40mm dia in short lengths, to walls/ poles/ pillers including cutting, chasing and fixing one end on walls/ pillers/ in ground for garden light fittings/ gate light complete all as specified and directed.

Sppply & Laying XLPE insulated, armoured, electric cable with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed, for the following:-

(a) 35 Sqmm 3.5 core

(b) 16 Sqmm 4 core

(c) 10 Sqmm 4 Core

(d) 6 Sqmm 2 core

Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/ dense soil/ road and getting out complete including making good of excavated road with same material and PCC complete all as specified and directed.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

M&L for filling approved fine crusted sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and directed. (Note : Punned thickness of sand shall be measured)

M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection complete all as specified and directed.

S&F of LED 10 Watt Bollard garden lights fittings, integral pole mounted decorative LED post top with IP 65 protection with robust design and efficient light distribution and taking out old defective fittings and all necessary fixing arrangements complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 Sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.5, connected to earthing test point complete including testing on completion all as specified. incl taking down old unsv earthing.

Supply & fix in repairs modular fan regulator step type, 2 module type/ normal type as per site requirement complete all as specified and directed.

(Item No 28 contd.) Incoming : MCCB 200 A, 4 pole, 25KA-1 No. including CTs, Digital Ammeter, ASS, Digital Volt meter, VSS, Phase indicating lamps & control fuses/ MCBs etc. Bus Bar : Copper strip busbar rating 250A of size for Ph 12 x 10mm, N&E 12 x 5mm and short circuit capacity 30ka, with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 05 Nos Outgoing : Separate cubical chamber with a cable alley not less than 300mm width for installation/ connecting the following switch gear : (i) MCB, 63A DP Amps, 240 volts, ‘C’ curve, 10 KA - 10/12 Nos (ii) MCB, 40A DP amps, 240 volts, ‘C’ curve, 10 KA - 01 Nos (iii) Fixing only single phase serviceable existing electric meter - 10/12 Nos (obtained from exiting panel/ bldg)

Supply assembly, erection, testing commissioning of indoor wall mounted panel frame size of 1500mm x 900mm x 247mm mounted cubical type factory made IP 65 of environment friendly polycarbonate PC - GFS Insulation-enclosed power distribution board as power switchgear and control gear assembly (PSC) in accordance with IEC 61439-2wall mounted LT panel board with OEM Manufacturing certificate, Bottom parts and lids of the boxes made from impact-resistant polycarbonate, halogen and silicone-free, colour RAL 7035, transparent lid with quick action fasteners for tool operation. Burning behaviour according to IEC 60695-2-11 glow wire test + 960°C.Maximum water absorption 10 mg in accordance with DIN 53473. Protective measure : totally insulated (protection class II), the enclosure should have mechanical strength equivalent to IK10 (bidder should submit compliance for same for polycarbonate enclosure in OEM letterhead with technical bidding) suitable for 415V 3 phase 4 wire, 50HZ non metalic kiosk single door with the required provision for 3 switch gears and control gears along with the approved make. the LT panel including Separate comparment for fixing of four Nos Three Phase & four Nos single phase meter (single phase meter should be connected with three phase meter) and providing MCB and terminal, providing glass view for reading of meter complete fabrication shall be painted as per specification. Wall mounted LT panel board shall be complete with all standard accessories factory made with OEM manufacturing certificate, RTC & test certificate, including, phase indicating lamps control fuse unit, with comprising the following. Drawing from Original Equipment Manufacturing (OEM) to be got approved from accepting officer before supply of Panel. ( Drawing from any other agency/ System house will not be accepted. Panel should be manufactured and assembled by OEM only. Polycarbonate enclosure & Panel manufacturer should be the same. Fabrication/ Assembling from any other system house will not be accepted. Inspection by company engineer after installation at site is mandatory and rates deemed to be included it the overall quoted rates. The bidder should submit all relevant test certificate/ compliance in OEM letterhead during technical evaluation. The bidder should provide warranty/ guarantee format in OEM letter head. The bidder should submit Routine test certificate during order execution in OEM letterhead. Supply with and including Suitable size of glands for incoming & Outgoing cables, Grounding the panel board Suitable PCC Foundation, Structure made out of angle iron Mounting Structure : RAL 7016, Incoming : MCCB 125A, 4 pole, 25KA-1 No. RYB Indication lamp, Digital Ampere Meter. Digital Volt Meter,125A/5A, 5VA, CL.1, CT - 3nos, Fuse Terminal Block with 2A Fuse - 6 Nos Outgoing : connecting the following switch gear : (i) MCB, 63A FP Amps, 415 volts, ‘C’ curve, 10 KA - 04 Nos. (ii) MCB, 32A DP Amps, 240 volts, ‘C’ curve, 10 KA - 04 Nos. (iii) 04 x 3 phase electric meter - 04 Nos each. (iv) 04 x 01 phase electric meter - 04 Nos each

Ms Kailash Chandra Babulal (BID ID -3484262)

MODI CORPORATION (BID ID -3489957)