Construction of Unity Mall GOA at Chimbel Panaji Goa A scheme Under the Special Assistance to the State for Capital Investment by Govt of India for promotion of Skill India Make In India and One District One Product

Amount

CIVIL WORKS

Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area

Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m. _Ordinary soil

Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m. Hard Soil

Felling trees of girth Beyond 30 cm and upto 60 cm girth (measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads :

Felling trees of girth Beyond 60 cm and upto 120 cm girth (measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads :

Felling trees of girth Beyond 120 cm and upto 240 cm girth (measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads :

Earth work in excavation over areas of all type of strata comprising of any type of material such as soil ,silt,clay, sand, saturated soil, gravel, murum of all varieties, shingles, pebbles, all type of congolmerates,latrite rock,soft rock,ordinary rock, disintegrated rock,fissured/shattered rock, decomposed rock, weathered rock and all such material either in full or part as the case may be adopting any method/ methods as may be convenient or permitted (blasting prohibited) including dressing of side ramming bottom, all leads and lifts, getting out excavated soil & stacking as directed , pumping and bailing out water, barricading,danger lighting, guarding as directed. chiselling ,wedging,etc., in all conditions such as dry , moist, foul, saturated, submerged, etc., as directed by the Engineer etc., all complete

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer .

Supplying and filling Moorum in layers not exceeding 20 cm in depth breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, & rolling every 3rd & top most layer with power roller of minimum 8 tonnes & dressing up in plinth under floors, trenches including watering ramming consolidating, dressing, complete.etc.

Granular Sub-Base with Coarse Graded Material ( Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401)

Transportation and carriage of excavated material by tipper truck including loading, unloading and stacking upto 20 Km

MASONARY WORKS

Providing and laying autoclaved aerated cement blocks masonry with 200mm AAC blocks in substructure & superstructure up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 8 mm dia M.S. bars at every third course of masonry work.

Pre-cast cement concrete solid block masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in foundation,plinth and in superstructure from floor one level upto floor V level size of blocks (40 x 20 x 15)

Rubble packing with hard laterite stone with available material on site under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc. String courses, copings, bedplates, anchor blocks, plain window sills and the like.

Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in all sizes in superstructure from floor I level upto floor V level.

PLAIN AND REINFORCED CEMENT CONCRETE WORKS

Providing and laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggregate 20 mm nominal size) excluding the cost of centering, shuttering and finishing etc.

Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: All work up to Plinth level

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size)In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level

Providing and laying in position M-10grade of ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level

Providing and laying in position M-25grade of ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level

Providing and laying in position M-30 grade of ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level

Providing and laying in position M-35 grade of concrete ready mixed concrete (RMC) with usage of Ground Granulated Blast Furnace Slag (GGBS) as per IS 12089 and IS456-2000 manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in- charge. All works upto floor V level

Centering and shuttering including strutting, propping, & removal of form for Foundation, footings, bases of columns

Centering and shuttering including strutting, propping, & removal of form for Vertical surfaces such as retaining walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

Centering and shuttering including strutting, propping, & removal of form for Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan)

Centering and shuttering including strutting, propping, & removal of form for Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth

Centering and shuttering including strutting, propping, & removal of form for Staircases (except spiral staircases) excluding landing .

Centering and shuttering including strutting, propping, & removal of form for Suspended floors, roofs, landings, shelves & their supports

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m, for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (plan area to be measured)

Providing and fixing G.I. sheet of 26 S.W.G. for using in construction/Expansion joint wherever necessary as per directions of the Engineer-in- Charge.

Providing and applying structural grade bonding agent a two component, solvent less epoxy resin based. It shall be formulated to meet the requirement of ASTM C881 Type 2, Grade 2, Class B &C. The Bonding agent shall exhibit minimum open time of 6 hours and shall exceed the tensile strength of concrete in terms of its adhesive bond strength. This epoxy system on mixing yields an adhesive for internal or external bonding of renderings, granolithic toppings, and new concrete to old concrete. Item is inclusive of all tools, plant, labour, materials including necessary scaffolding, etc complete.

STRUCTURAL STEEL

Steel work welded ( SAIL , TATA , VIZAG & using electrodes of AdOr make only ) in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying one coat of primer of red lead paint before erection & one coat after erection. In Tees, Angles, flats and channels

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.(COLD STEEL)

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.

Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately)

ROOFING AND WATERPROOFING WORKS

Providing and laying integral cement based treatment (Box type) for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer and consisting of : i) Ist layer of 20 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer using rough Shahbad/Kotah stone.

Providing and laying integral cement based treatment (Box type) for water proofing on the vertical surface by fixing specified stone slab 20 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer using rough Shahbad/Kotah stone.

Providing and applying on a well prepared horizontal surface Coniroof 2111 of BASF make or equivalent Supply and Installation of BBA Approved spray applied waterproofing membrane system, a multi-layered system comprising, primer, waterproofing membrane. The product shall have the green label certificate. The primer shall be CONCRESSIVE 2525 or equivalent, a two component, solvent free epoxy resin based. The fast-drying primer shall be CONCRESSIVE 2525 or equivalent, a two component, solvent free epoxy resin based. It shall be formulated to meet the requirements of non tainting for usage in food storage and potable grade structures. It shall be fully compatible with CONCRESSIVE Range of repair mortars. Dried, graded MASTERTOP SRA no. 3 sand or equivalent is immediately and evenly spread over the entire wet surface by hand or mechanically. When sufficiently cured the surface is vacuumed to remove any loose sand. Waterproofing Membrane: The waterproofing membrane shall be CONIPUR M 800 or equivalent, a solvent free two component spray applied system. Ladders supporting materials etc. complete. Rates shall be inclusive of all labour, materials, tools and plant etc. complete.

Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.

Providing & Fixing in position Double Skin roof with Zincalume/ Galvalume colour coated & bare profile sheet with subtle square fluting factory cut at all heights for roof, side & Gable cladding complete in all respect. TOP SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior SMP coat on top surface and nominal 5 μm reverse backer coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations.

Proving ridges or hips of width 60 cm over all in plain G.I. sheet fixed with galvanized iron J or L hooks bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.80 mm thick sheet.

Providing and fixing 15cm wide 45cm overall semi- circular plain G.I. sheets gutter with iron brackets 40 x 3 mm bolts nuts and washers etc., including making necessary connection with rain water pipe complete as per design.0.80 mm thick sheet

PLASTERING AND FINISHING WORK

12 mm thick cement plaster 1:4 (1 cement:4 fine sand)

6mm thick cement plaster with 1:3 (1 cement : 3 fine sand)

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Extra for plastering exterior walls of height more than 10m from ground level for every additional height of 3m or part thereof.

Extra for providing and mixing water proofing material proportion recommended by the manufacturers. (a)12mm cement plaster 1: 3 (1 cement : 3 sand)

Rough cast plaster with a mixture of sand and gravel or crushed stone from 2.36mm to 12.5mm nominal size dashed over and including fresh plaster in two layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm cement plaster 1: 3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Natural cement finishing using ordinary cement

PAVEMENT

Vaccum dewatering of laid concrete for roads/ areas using Tremix machinery including formwork with MS channel/ angle sections on sides of concrete with proper supporting system, surface/screed & needle vibrating & levelling of concrete. Vaccum dewatering should be done using suction mats (spread on surface) & suction pump, power floating/ troweling using screen floater, manual spreading of hardening compound (if any), smooth/rough/broom finish to the required slope, camber & level, groove cutting (upto 10mm wide x50mm deep) for contraction/expansion, construction & longitudinal joints, Providing dowel bars with sleeve/tie bars, filling two component polysuphide sealant/joint filler (Bitumen hot sealing compound: Grade A), taping with masking tape etc complete. (Concrete, reinforcement, Dowel Bar with sleeve/tie bar Reinforcement, tarpaulin sheet to be paid separately)

Providing and laying factory made 60 mm thick in all colours except grey (M35 grade) Shot blasted cement concrete interlocking paver block of minimum M35 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm.

Providing and laying factory made 80 mm thick in all colours except grey (M40 grade) Shot blasted cement concrete interlocking paver block of minimum M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm.

CLADDING & GLAZING WORK

Supply and installation of roof glass glazing system with 17.52mm thick laminated glass. Rate includes aluminium transom mullion section , powder coating , Aluminium pressure plate, Alu transom joint, powder coating, brackets, nut bolt washer weather silicone, structural silicone, EPDM rubber, Exterior gasket, labour, hardware and all other related accessories.Submit all shop drawings before execution and get approve from Engineer incharge. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and Fixing polished Laterite Stone Cladding of size 6"x 12"x 19mm thickness on wall surface, RCC,Solid Concrete Block Wall and all type of interior, exterior compound wall and gate etc.with an adhesive as specfied by Engineer in charge, including all lead and lifts,scaffolding etc. and complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey of India/ Engineer, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the exposed laterite masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer. (The rate is inclusive of all materials & labours). Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and Fixing MCM (Modified Clay Material) CUTSTONE R04 of size 1200 x 600 mm of PHOMI make, As per company standard dimension, pattern, color as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with thermal Conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation - Class A— ASTM E84- 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label, and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based MCM adhesives, as per MCM adhesive chart and substrate, as per directions of Engineer In-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge.

Providing Pre-Construction. anti-termite treatment to the buildings conforming to I.S.S.6113 part II 1971 (revised) including adopting the precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guaranty for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. The payment will be made on plinth of the building

WOOD WORK

Supply & installation of fire rated doors with steel doors with steel frames having douple rebated frame profile 139x57mm galvanished Steel Sheets and 45mm thick shutter made 0.8mm thick galvanished steel sheets filled with fire retardant materials suitable for stability and intergrity with 120 minutes fire rating as per S 3614 part II finished with powder coating,Yale SS 304 Ball bearing Hinges 4"x3"x3"mm,Single type Fire Door ( size 1200x2400mm). Door Closer with Standard arm,Supply & Fixing panic bar {Push bar to open }, Vision Panel With Tuff Glass 200x300, etc complete Make as per enclose annexure

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon.Second class Indian teak wood

Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. (40 x 3 mm flat iron hold fast, 15 cm long)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type (BWP), core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & fixing Stainless Steel tubular lever D- Type mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete

Providing and fixing Stainless steel D type handles with necessary screws etc complete a) L 300mm/325mm x 22 to 25mm dia

Painting (one or more coats) with black japan paint of approved brand and manufacture to give an even shade.

Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.

Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete.

ALUMINIUM WORK

Providing and fixing of aluminium windows with three tracks and three shutters sliding windows with tubular frame sections powder coated with pure polyster powder of thickness 15-80 microns with approved standard acessories such as ball bearing rollers concealed lock, 6mm plain clear glass with EPDM beading etc.

Supplying and fixing Motorized perforated rolling shutters as per requirements the rolling shutter curtain will be single skinned Galvanised steel laths with natural finish 1.mm thick in corrugate design & the bottom channel will be in M.S. of 14 Gauge. The lath will be interlock & lock with each other. With complete locking arrangement in bottom with pressed galvanised steel hood & motor cover with natural finish.CE Certified.The operator should be a heavy duty with chain and sprocket drive system with side brackets and manual override system in case of power failure with both side ball bearing, suitable for industrial use. Having a inbuilt limit switch, having a auto stop at the time of opening & closing as per requirements. The operator is always maintains free without spring balance. Including Key switch. Including one coat of grey epoxy primer by spray Shaft. Shaft is manufactured from mild steel tube of suitable outside diameter and wall thickness to suit the shutter application and is unsprung finish One coat of grey epoxy primer by spray Side Guides 2.0mm thick heavy duty TG Galvanised Steel Finish One coat of grey epoxy primer by spray Bottom Profile Bend-resistant double-skinned extruded Aluminium profile for additional strength.The bottom rail is fitted with extruded rubber bottom seal that will seal against the floor when the door is fully closed. Finish One coat of grey epoxy primer by spray Locking arrangement. Hood Cover Pressed galvanised steel hood box complete with reinforced bracket as required to suit the shutter width. Including loading,unloading, safe storage at site until installation, civil work, c-channel, structural support, hydra, ladder or scaffolding,etc completed. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing and fixing of S.S. AISI 304 grade Railing of 1.05m high with glass panelling of 10mm toughened glass of approved make & approved colour fitting with S.S. glass studs with verticals of 38 X 38 mm S.S. pipe (16 guage - 1.25mm thk) at spacing of 1200mm c/c with fixing in Granite with core cutting & Chemical Grouting with top handrail of 50 mm dia S.S. pipe (16 guage - 1.25mm thk) as per detailed design and drawing or as directed by Engineer. including all materials, labour and equipment etc. complete.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing and fixing in position S.S. hand rail in main stair case, and landing as per approved design shown in the drawing including bending handrail pipe to proper shape in curves with specials, etc. complete.

PAINTING AND FALSE CEILING

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying the Texture paint as per the manufacturers specification to the external surface of walls, columns,beams (Asian, Nerolac, Berger, Jotun, Godavari) of approved colour and shade with min. 1.5 to 2 mm Thickness over the External plaster / RCC surface with one coat of primer and minimum two coats of acryllic exterior paint.( Texture + 2 Coats of Apex Paint). Item to include preparing the surface with necessary approved fillers, making good by touch up etc. to give the desired finish as per the approval of the architects and Engineer incharge all complete. Rate to include cost of the tools, tackles, H-frame steel scaffolding, labour.

Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

White washing with lime on new work ( three or more coats) to give an even shade.

Extra for painting on walls on the outside at height more than 10m from ground level for every additional height of 3.0 m or part thereof.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Providing and fixing in position Gyproc by Saint-Gobain Gypsum board false ceiling with 12.5 mm thick Gypsum boards as per required Design ( Steps, Curve or Other Formation as per Architect), screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material,scaffolding, lifts etc. all complete.

FLOOR AND FLOOR FINISHES

Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete (900x 900 mm Dark Shades)

Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete.900 x 900 mm - Dark Shades

Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.

Providing and laying approved flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer. (Jet Black )

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab._Cat Eye

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab._Cherry Red

Providing and fixing Granite stone slabs (flamed finish) 18mm thick in Tread, risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete (cat eye)

Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete (Cat Eye)

Providing and and laying Liner vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete

Providing and and laying Button vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete

Providing and fixing 18 mm thick Granite of any colour and shade, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, door frames and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. area of slab over 0.50 sqm (jet Black)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm Cherry Red

Providing 25mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Crazy ceramic tile flooring (China Mosaic flooring), with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer- in-charge.

Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)

Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

Providing & fixing in position traction matting antiskid clear tape 2 inch wide (50mm) for staircase having Granite Treads. The antiskid clear tape should be minera l coated slip resistant material with pressure sensitive adhesive including cleaning, degreasing, priming to mask the surface (if required), presssing using rubber roller etc. complete.

Providing and fixing in position Glass mossaic tiles at finished plain/flat/curved/inclided surface of size 10-50 mm square x 4 mm in all colour, design , fixing in customize design as per direction of Engineer. The glass mosaic tiles to be fixed on the surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer.

GLAZING WORK

Supply and installation of Spider glazing system, for provision of 12mm thk clear toughened glass door shutter fittings including the cost of top & bottom patch fitting, over panel patch, panel connector pivot, over panel/sidepanel connector with pivot, bottom lock, stainless steel hardware fittings of 316 grade for operating door i.e. door handle 450mm Lg, floor spring of approved make and locking arrangement etc. complete including the cost of cutting the floor and making good the same, as per design and drawing all complete as required.Submit all shop drawings before execution and get approve from Engineer incharge.

Supply & Installation of Modular Aluminium single glazed partitioning frame of 45mm System,Using V401 (45mm x 25mm) as top channel, wall starter, and V402&V402A (45mm x 25mm)bottom channel. Partition Dimension – 45mm x 25mm. Finish –Midnight Black Anodized colour with 6063 T6 grade of aluminium finish.Glass type-10mm Toughened.Acoustic performance STC 32 TO 34 DB.as per design and drawing all complete as required.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing & fixing in position Frame less sensor operated glass double shutter sliding doors with 10 mm thick toughened crystal edge polished glass with approved etching design manufactured to relevant I.S. codes from approved manufacturer including cost of activators, switches, track and mounting profile, Carrier, Door suspension device with adjustable fixture, Motor with decoder,Track rail, Return pulley, Basic module, control with integrated switched power supply unit and multi-way connectors for optional expansion modules, Door stop, safety sensors etc.Dorma Make or equivalent as required all complete at all heights as per approved drawing and as directed by the Engineer-in-Charge. All exposed edges of the glass shall be ground, polished and rounded. The door shall be provided with sensing devices to detect motion in front of the door( Both Inner and Outer face ), activate the control mechanism and thus open and close the door. Make as per enclose annexure or as directed by Engineer in charge etc, complete

MODULAR FURNITURE (Make as per enclose annexure or as directed by Engineer in charge etc, complete)

Supplying & installing in position main table of approved make, colour & size ( TABLE SIZE: 1800mm(L) X 750mm(D) X 750mm(HT) SIDE TABLE SIZE : 900mm(L) X 450(D) X 700(HT)) with top made up of 25mm thick exterior grade prelaminated particle board with 2mm thick PVC edge banding on all sides & supported on Gable ends/sides made out of 25mm thick prelaminated particle board & Modesty panels in 18mm thick prelaminated particle board.Gable ends & modesty panel exposed edges shall be finished in 2mm thick PVC edge banding & sealed edges shall be in 0.8mm thick PVC edge banding. Wire routing/ wire management shall be provided on main table or side table as specified. Table shall have independent Mild steel powder coated CPU trolley, wire manager & MS powder coated key board tray of standard size. The keyboard tray shall accommodate mouse pad. The side table of approved size shall have top made up 25mm thick exterior grade prelaminated particle board top with 2mm PVC edge banding & supported with storage cabinet below in 18mm thick prelaminated particle board, back sheet of 9mm thick prelaminated particle board & skirting of 75mm height. Cabinet shall have two equal size shutters in 18mm thick prelaminated particle board with 2mm thick PVC edge banding & fixed with S.S. brush finish brass hinges & shall be provided with full length aluminium G profile handles /4'' S.S.304 grade brush finish handles, premium lock, & one shelf in centre fixed on shelf button. The pedestal unit of size 350mm(L)X450mm(W)X550mm(H) shall have top made up of 25 mm thick prelaminated particle board & sides in 18 mm thick prelaminated particle board and 75 mm height skirting with 2mm thick PVC edge banding on exposed edges 0.8 mm thick PVC edge banding on sealed edges. The pedestal shall have three equal size drawers with front fascia having central locking system & full length aluminium G profile handles/ 4"SS 304 grade brush finish handles ,roller slide mechanism and casters for added mobility. All exposed edges shall have 2mm thick PVC edge banding and sealed edges shall have 0.8mm thick PVC edge banding. All material shall be of approved make. Modular furniture shall confirm to BIFMA & FIRA standards. All works complete as per the drawing / Image, technical specification and direction of the Engineer(Executive /Manager Table )

Supplying and placing in position armed revolving high back chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) . Chair shall have cushioned seat and back upholstered with good quality fabric of approved color. The seat and back shall be made of moulded foam with integrated lumber support having contoured shape at seat back for better comfort. The seat and back shall be made up of 12 ±0.1mm. thick hot-pressed plywood upholstered with moulded foam and fabric. The HR polyurethane foam shall be moulded with density= 42±2 kg/m3. The chair shall have BIFMA compliant Class 3 gas lift for seat height adjustment with an adjustment stroke of 100mm. The chair shall be provided with Centre Tilt mechnism with upright position locking, 360 degree revolution, Tilt tension adjustment, Nylon Castors along with Nylon Star Base. The twin wheel castors shall be injection moulded in Black Nylon. The chair shall have PP adjustable armrest with position locking. Overall Dimension: 590 (W) X 745 (D) X ( 1050-1145 )H. Executive Chairs

Providing & Fixing of Conference Table @ 2400Lx1200Dx750HT - made up of 18+18mm Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 2 Nos.

Supplying and placing in position armed revolving mid back chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) Zen High Back Chair shall have cushioned seat and back upholstered with good quality fabric of approved color. The seat and back shall be made of moulded foam with integrated lumber support having contoured shape at seat back for better comfort. The seat and back shall be made up of 12 ±0.1mm. thick hot-pressed plywood upholstered with moulded foam and fabric. The HR polyurethane foam shall be moulded with density= 42±2 kg/m3. The chair shall have BIFMA compliant Class 3 gas lift for seat height adjustment with an adjustment stroke of 100mm. The chair shall be provided with Centre Tilt mechnism with upright position locking, 360 degree revolution, Tilt tension adjustment, Nylon Castors along with Nylon Star Base. The twin wheel castors shall be injection moulded in Black Nylon. The chair shall have PP adjustable armrest with position locking. Overall Dimension: 590 (W) X 670 (D) X ( 985-1080 ) H. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer

Supplying and placing in position armed revolving Watt mid back chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) compliant. Chair shall have cushioned seat and back upholstered with good quality fabric of approved color. The seat and back shall be made of moulded foam with integrated lumber support having contoured shape at seat back for better comfort. The seat and back shall be made up of 12 ±0.1mm. thick hot-pressed plywood upholstered with moulded foam and fabric. The HR polyurethane foam shall be moulded with density= 42±2 kg/m3. The chair shall have BIFMA compliant Class 3 gas lift for seat height adjustment with an adjustment stroke of 100mm. The chair shall be provided with Centre Tilt mechnism with upright position locking, 360 degree revolution, Tilt tension adjustment, Nylon Castors along with Nylon Star Base. The twin wheel castors shall be injection moulded in Black Nylon. The chair shall have PP adjustable armrest with position locking. Overall Dimension: 590 (W) X 670 (D) X ( 985-1080 ) H. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Enginee

Providing, fabricating and fixing in position modular linear type workstations Table Size 1200mm (L)x 600mm (D)x 750mm(Ht)which includes screen panel, work surface with storage & MS powder coated CPU trolley. Work surface shall be in 25mm thick exterior grade prelaminated Particle board with 2mm thk PVC imported edge banding tape. The bottom surface of the table shall be laminated. The worktops shall be supported on MS powder coated frame & legs. Modesty panel shall be in MS powder coated panels/18mm prelam panels as per design. The worktops shall be provided with PVC wire manager for cabling. Storage: Side storage shall have 1 module of drawers and 2 modules of sliding shutter cabinet .The top shall be in 25mm thick pre laminated particle board. The shutters & drawers shall be made of 18mm thick pre laminated particle board. All the exposed edges shall be sealed with 2mm thick PVC Imported edge banding. Cabinet shall be provided with single shelf and single shutter fixed on sliding mechanism. The drawer unit shall consist of 2 box drawer and 1 file drawer. The drawer box shall be fitted with roller Slide.The drawer unit shall be provided with central locking system, where in the three drawer shall be locked with one key. 4"SS 304 grade brush finish handles shall be provided. Screen panels: Screen panels for fixing on workstations tops shall have 25-35mm thickness with frame horizontals of 1mm thick CRCA sheets & the verticals shall be of Aluminium Extrusions of 1.5mm thick Frame and shall be inline with the Top trims & end trims.. All the frames shall be duly powder coated. Panel Tiles: The fabric tile panels shall be Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice.Wire management: Internal Concealed Raceways shall be provided below work surface with switchboard arrangement for Power & Data along with PVC Wire manager with Grommet / scallops & Individual Raceway arrangement for Data/ Power cable. CPU Trolley & Keyboard tray: CPU trolley shall be made from 1mm Thick CRCA steel sheet. The trolley shall be mounted on lockable castors. The keyboard tray shall be MS powder coated & shall be fixed on telescopic channels & have provision for mouse pad.All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Enginee

Supplying and placing in position armed (Cabin Charirs)revolving mid back chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) . Chair shall have cushioned seat and back upholstered with good quality fabric of approved color. The seat and back shall be made of moulded foam with integrated lumber support having contoured shape at seat back for better comfort. The seat and back shall be made up of 12 ±0.1mm. thick hot-pressed plywood upholstered with moulded foam and fabric. The HR polyurethane foam shall be moulded with density= 42±2 kg/m3. The chair shall have BIFMA compliant Class 3 gas lift for seat height adjustment with an adjustment stroke of 100mm. The chair shall be provided with Centre Tilt mechnism with upright position locking, 360 degree revolution, Tilt tension adjustment, Nylon Castors along with Nylon Star Base. The twin wheel castors shall be injection moulded in Black Nylon. The chair shall have PP adjustable armrest with position locking. Overall Dimension: 590 (W) X 670 (D) X ( 985-1080 ) H. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Enginee

Supplying and installing in position storage unit of size (900mm(l)x 450mm(d)x750mm(Ht) approved make, colour and size with top made up of 25 mm thick exterior pre laminated particle board & having storage body made up of 18mm thick exterior grade pre laminated particle board, back of the unit made up of 9 mm thick exterior particle board with 75 mm height skirting. All the exposed edges are in 2 mm thick PVC (Polyvinyl Chloride) edge banding & sealed edges are in 0.8 mm thick PVC (Polyvinyl Chloride) edge banding. Equal size shutters (upto 500 mm wide) fixed with stainless steel brush finish brass hinges of 38 mm, handles , premium lock to be provided and one shelf in centre fixed on shelf button. Both made up of 18 mm thick pre laminated particle board with 2 mm thick PVC (Polyvinyl Chloride) edge banding on exposed sides & sealed edges in 0.8mm thick PVC (Polyvinyl Chloride) edge banding sizes shall be cross checked on site as per site measurements at the time of execution.All material shall be of approved make.All complete as per the drawing / Image, technical specification and direction of the Engineer.

Supplying and installing in position Metal storage cabinet of size 900 mm (W) x 507 mm (D) x 1950 mm (H) made of Prime Quality CRCA Steel with panels from 0.6 mm thick CRCA Steel and front frame and shelf made from 0.8mm thick CRCA Steel. The cabinet shall be provided with Full height Steel Hinged Door with Handle & Base flush with door made from zink alloy and skirting of 75 mm height. Cam Lock which shall be having 3 way locking 90 degree removable key type mechanism. 4 numbers of full height Adjustable Shelves. The cabinet shall be finished with 50 Microns (+/-10) thick Epoxy Powder coating. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer

Supplying and Installing in position of 3 units locker modules of size (1200mm (L)x 450mm(D)x 750mm(HT) having 6 compartments with Doors in each unit made out of CRCA (Cold rolled close annealed) Sheet not less than 0.8mm thick for Carcass & Shelves. Skirting to be done with 1.2mm thick CRCA (Cold rolled close annealed) Sheet. Storage Top to be made out of 2mm thick CRCA (Cold rolled close annealed) Sheet and Shelves with Stiffener to have an overall thickness not less than 15mm.The shelves should have a load carrying capacity of 35kg(UDL- Uniformly distributed load). All metal parts to have a Epoxy Polyester Powder coat finish within the range of 50 microns DFT (Dry film thickness) complete as directed by the Engineer. Size of each locker 400mm(L) x 450mm(W) x 305mm(HT). (Total 18 nos of lockers in each module.) Each unit shall have 9 shutters. Each locker shall have 10 Lever cam lock with lock lever & ABS plastic handle. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.

Supplying and placing in position Training flap type chairs having Seminar hall Chair Seat & back in PP (polypropylene) with cushion on seat. The Frame shall be in M. S powder coating with eye shape pipe of 30mm x 15mm x 16g, PU cladding on Arms , Writing Tablet in both side prelaminated particle board with all side edge banding.All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (Refer drawing number

Supplying and installing in position bench of approved make, design and size with top made up of WPC (wood plastic composite) slats & framework & legs in Stainless steel 304 grade rectangular sections of size 50mm x 25mm x 2 mm as per approved design. All material shall be of approved make. All works complete as per the drawing / Image, technical specification and direction of the Engineer.

Supplying & placing in position (Business lounge) 3 Seater sofa of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cusion shall be made of 7" multi layered foam of density 32D and HD with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength. The backrest shall be made of foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The seating cushions shall have elastic webbing of 250 gsm with diagonal weave. The thread used shall be nylon bonded to provide lasting stitch strength.The outer finish shall be of superior quality leatherette (upto Rs. 700 per metre) stitched with nylon bonded thread. The legs shall be of PVD coated SS 304 grade tubular section of height 100mm and 2 mm thickness with rubber gasket. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 mm

Supplying & placing in position SOFA ( BUSINESS LOUNGE) 1 seater sofa of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cusion shall be made of 7" multi layered foam of density 32D and HD with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength. The backrest shall be made of foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The seating cushions shall have elastic webbing of 250 gsm with diagonal weave. The thread used shall be nylon bonded to provide lasting stitch strength.The outer finish shall be of superior quality leatherette (upto Rs. 700 per metre) stitched with nylon bonded thread. The legs shall be of PVD coated SS 304 grade tubular section of height 100mm and 2 mm thickness with rubber gasket. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 mm

Supplying & placing in position BUSINESS LOUNGE - SOFA CHAIRS of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cusion shall be made of 4" multi layered foam of density 32D and HD with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength. The backrest shall be made of 2" foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength.The outer finish shall be of superior quality leatherette (upto Rs. 1200 per metre) stitched with nylon bonded thread. The legs shall be prong type of s.s 304 grade sections. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 - 450mm mm).

Supplying & placing in position BUSINESS LOUNGE CHAIRS of approved design, colour and size having solid frame structure with inner frame made of kiln chemical treated approved high quality wood. The seat cusion shall be made of 4" multi layered foam of density 32D and HD with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength. The backrest shall be made of 2" foam of 23D with polyester polyfill outer layer of 180 gsm to keep the upholstery wrinkle free & soft. The thread used shall be nylon bonded to provide lasting stitch strength.The outer finish shall be of superior quality leatherette (upto Rs. 1200 per metre) stitched with nylon bonded thread. The legs shall be prong type of s.s 304 grade sections. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.(Seat Height - 410 - 450mm mm). (Refer drawing number – UM-IN-201 to UM-IN-205)

Supplying and installing in position lounge Center table of approved make, colour and size(TABLE SIZE: 900mm(L)/900mm(dia) X 900mm(D) X 600mm(HT)) made up of 19mm thick Marine BWP (boiling water proof) plywood and finished in 10mm thk 100% acrylic UV grade solid surfacee. The understructure shall be made up of PVD coated stainless steel 304 grade base/ vertical supports as per design. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer.

Supplying and installing in position lounge Corner Table of approved make, colour and size (TABLE SIZE: 600mm(L) X 600mm(D) X 450mm(HT) made up of 19mm thick Marine BWP (boiling water proof) plywood and finished in 10mm thk 100% acrylic UV grade solid surfacee. The understructure shall be made up of PVD coated stainless steel 304 grade base/ vertical supports as per design. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. (

Providing & installing in position square wooden Corner table 9Size 600mm (L)x 600mm (D)x 450mm ( HT)made of teak wood and having wooden legs and horizontal frame as per design. The table shall include necessary hardware fittings, fixtures etc. The table shall be finished with 3 coats of melamine polish of approved colour. All material shall be of approved make. All works complete as per the drawing/ Image,technical specification and direction of the Engineer.

Supplying & installing in position cafetaria tables with table top made up of particle board conforming to IS:12823 interior grade with prelaminated finish. Top shall be 25mm thick with 2mm PVC edge banding with enhanced scratch resistance with understructure of Mild steel powder coated sections of 2 mm thick as per approved design.Understructure shall be fitted to top by stainless steel machine screws. The table shall have a plastic glide fixed at the understructure to prevent the damage of table while stacking complete with all hardwares accessories. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Enginee (TABLE SIZE:1200mm(L) X 750mm(D) X 750mm(HT)

Supplying & installing in position cafetaria tables with table top made up of particle board conforming to IS:12823 interior grade with prelaminated finish. Top shall be 25mm thick with 2mm PVC edge banding with enhanced scratch resistance with understructure of Mild steel powder coated sections of 2 mm thick as per approved design.Understructure shall be fitted to top by stainless steel machine screws. The table shall have a plastic glide fixed at the understructure to prevent the damage of table while stacking complete with all hardwares accessories. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineec RECTANGLE TABLES - 6 SEATER (TABLE SIZE:1800mm(L) X 750mm(D) X 750mm(HT)

Supplying and Fixing Dust Bin ( 50Litrs ) Moder Stainless Steel Swing Lid Dustbin 14x24 Inch, 50 Liter

Supplying and Fixing of SS TRIO SWING Dust Bin of 60 litrs Each etc Complete

Decorative Planter GFRC.Providing and installing in position decorative planter in GFRC of size around 800mm dia x 800mm height of approved design, color, texture complete with handing over to client etc. All material shall be of approved make. All works complete as per the drawing, specification, image and direction of the Engineer

MISCELLANEOUS & FIRE SIGNAGES

Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work (Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control )Over 10 cm in width

Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work (Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control )Over 10 cm in width

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and free from streaks and holes as per MORTH Specification 803

Traffic Cone (Provision of red fluorescent with white reflective sleeve traffic cone made of low density polyethylene (LDPE) material with a square base of 390 x 390 x 35 mm and a height of 770 mm, 4 kg in weight, placed at 1.5 m interval, all as per BS 873)

Road Delineators (Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming toIRC-79 and the drawings.)

Printing new letter and figures of any shade (Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade)

Fire Signages -Providing and fixing of the following Photoluminescent (Autoglow) Signages made up of Rigid Sheet ARS 10000 (GA) of 1 mm thick Sheet, it should resist temperature -20 to +80°C with having Life: 15 - 20 Years ( Indoor Use) with self Extinguishing, non radioactive, non peelable, non scratchable, non breakable, UV cured silk screen printed as per PSPA Class - A/DIN 67510 Part 2/60 Minutes/>700. And also Certified By Government of India Lab for a glow period > 24 Hrs, DRDO certified confirm as per the IS 9457-2005, IS 12349 & and getting material sample approval by Government of Goa Directorate of Fire & Services. The sinages shall be pasted on 4 mm thick ACP sheet of required size and then fixed on the door/ wall with 12 mm SS stud /SS mirror screw arrangement / 3m Tape or suspended from the ceiling by means of SS chain of 8 mm dia with anchor fasteners as per site conditions complete as required. All the materials shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. Make as per enclose annexure or as directed by Engineer in charge etc, complete Note: Before procuring the sinages material, sample approval to be taken by GOA FIRE DEPARTMENT.

Providing and fixing Photoluminescent (Autoglow) Signages-No Smoking signage on every floor, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 40cm.

Providing and fixing Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 40cm.

Providing and fixing Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 40cm.

Providing and fixing Floor identification signage ( i.e.,1,2,3 …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 20cm x 20cm.

Providing and fixing Fire Extinguish in lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 25cm x 20cm.

Providing and fixing Fire alarm point in lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 15cm.

Providing and fixing Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.5cm height letters in red with white back ground. The size of the board shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from finished floor near Manual call points.

Providing and fixing Danger Cautionary Signs in lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 25cm x 20cm.

Providing and fixing SERVER ROOM in lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 25cm x 20cm.

Providing and fixing AUTOGLO TAPE 0.2 mm thick route marking Identification and Directions in case of Emergency ( 40mmx10Mtr./Per Role)

Providing and fixing AUTOGLO TAPE 0.2 mm thick route marking Identification and Directions in case of Emergency ( 80mmx10Mtr./Per Role)

Providing and fixing EVACUATION PLAN - SANDWICH ACRYLIC WITH STUDS SIZE 42cm x 60cm

Providing and fixing SPEED LIMIT 10 KM/HR. - WITH 6 FEET MS STAND

Providing and fixing PILLER GUARD WITH RUBBER 80cm x 8cm x 10cm

Supplying and Installation of TOILET CUBICLES Thickness of Compact Laminate : 12mm,Overall Height of Cubicle: 2000mm,Door Size : 600mm * 1783mm,Colour : As Per Colour Shade,Size of Cubicle - · 1010mm (W) X 1350mm (D) x 2000mm (H)/· 1100mm (W) X 1400mm (D) x 2000mm (H)/· 1010mm (W) X 1400mm (D) x 2000mm (H)/· 1080mm (W) X 1400mm (D) x 2000mm (H) .Accessories: Stainless Steel & Aluminium a) SS 304 Gravity hinges,b) SS 304 Coat Hook with door Stopper.c) SS 304 Door Knob , d) SS 304 Lockset with indicator,e) SS 316 Adjustable leg,g) Aluminium Top Rail with SS Finish,h) Aluminium Door Stopper Channel SS Finish,j) SS 304 Screws and Noise Defending Tape All works complete as per the drawing/ Image, technical specification and direction of the Engineer.

Providing & Fixing Aluminum speed breaker of 150 mm wide & 30 mm height for general traffic at preferred crossing speed of 25 km/h,having bearing capacity 30ton above,having 12mm reflector glass bulb . The Aluminum speed breaker shall be fixed with all required nails, anchor fastners, accessories all etc. complete. Make as per enclose annexure or as directed by Engineer in charge. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing & Fixing Stainless Steel skirting upto 20 cm height of grade SS 304.Ensure that the substrate is dry, smooth and free from contaminants.Apply suitable cartridge adhesive to the back of the profile. To provide neat finishes to cut ends, pre-formed PVC-u internal and external corners along with end caps and joint junctions as recommended.All works complete as per the drawing/ Image, technical specification and direction of the Engineer. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing And Fixing Of Motorised Single Leaf Sliding Gate Sliding Gate As Per Design Provided Using Section As Galvanised Section Of Appolo Make Main Frame Will Be Of 96 X 96 X 4 Mm Shs With 50 X 25 X 2 Mm Rhs 25 X 25 Mm Solid Square Bar Forged And Design Bottom Track Will Be Fabricated Using Ismb 125 X 75 With 25 Mm Solid Round Of En-8 Material Wheel Will Be Special Gt-200i Dual Wheel With Dual Ball Bearing , Spacer , Lock , Jacket And Specially Design Interlocking Bolts , Sliding Gate Will Be Installed With Safety Cage, Painting Will Be Spray Paint With 1st Coat Zing Based Aviation Grade Primer To Bound With Galvanised Surface 2nd Coat Will Be Of Epoxy Based Red Oxide For Anti Rust , 3rd Coat Will Be Of Primer Surface Grey To Remove Welding Marks Paints Will Be Of 2 Coat Of Polyurethane Paint For Uv Protection Included As Per Engieer Design,Etc Complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Horticulture (Make as per enclose annexure or as directed by Engineer in charge etc, complete)

Supplying and stacking of good earth at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment).

Supply at site of work/store-deoiled neem cake duly packed in used gunny bags as per MORTH Specification 308.2

Supplying of sludge duly stacked at site/store as per MoRT & H Specification 308.2

Filling mixture of earth & sludge or manure in the desired proportion in trenches flooding with water and leveling (cost of supplying earth and sludge of manure and mixing excluded).

Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/and good earth to be paid separately).

Providing and fixing M.S. flat iron tree guard 60cm dia & 2 m high above ground level, formed of 4 nos. 25 x 6mm and 8 nos. 25 x 3mm vertical M.S. flat iron rings in two halves, bolted together with 8mm dia and 30 mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of priming, complete in all respects.

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete.-Lagerstroemia speciosa

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete.-Bauhinea purpurea

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete. - Bauhinea venigeta alba

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete. - Mimusops elengii

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete. - Michelia champaka

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete. - Plumeria alba

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete. - Plumeria rubra

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete. - Cassia fistula

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete. - Phyllostachys aurea

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete. - Erythrina indica

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete. - Plumeria Singaporensis

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete. - Wodyetia bifurcata

Providing on Site Required variety of Trees/palms ( Free from weeds /Disease etc ) 30 Cms., Bag Size 13"x13" HT 6-8' ( plants as per List Below etc complete. - Howea forsteriana

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - wedelia trilobata

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - Rhoeo Spathacea

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - Plumbago capensis

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - Alpinia zerumbet

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - Heliconia psittacorum

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - Hydrangea mycrophylla

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - Hamelia patens dwarf

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - Alocasia macrorrhizos

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - Heliconia Rostrata

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - Heliconia Metalica

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - alpinia purpurata

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - strelitzia reginae

Providing on Site Required variety of Shrubs ( Free from weeds /Disease etc ) 30 Cms., Bag Size 7"x8" ( plants as per List Below etc complete. - zephyranthes grandiflora

Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. Size 60 cm L x45 cm H x 15 cm T

Cable Duct Across the Road (Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of slope to toe of slope in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipe as per IRC:98-1997, bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC: 98 - 1997 and approved drawings.)

Supply and fixing of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinking is 1 Hz. There should be current losses of less than 20 micro-amperes at 2.4 V in sleep-charging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. Pre Qualification warranty for 2 years for the Solar Raised Pavement Marker from manufacturer shall be submitted by the contractor along with the tender for technical qualification in the tender and the contractor shall also submit test reports from government laboratory/independent laboratory for Compressive Strength and Prevention of Dust & Water for technical qualification in the tender.

PLUMBING

Proving and fixing white vitreous china Wall Hung type (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support - W.C. Pan with white plastic seat and lid

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.

Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore.

Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590x375x390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I. brackets, standard size C.P. Brassl flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. a. Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (211/2"x 17 1/2"x 8") depth 200 mm. Glossy. 1.0mm thk,

Providing and fixing low flow rate C.P sink mixer with extended swinging spout, etc with complete accessories.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing and Fixing toilet paper holder C.P. Brass

Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws_Glass container

Providing and fixing 300mm long SS Grab Bar. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing & fixing fully automatic "NO TOUCH" satin finish stainless steel AISI 316 grade wall mounted hand drier suitable to operate on 240 volts, single phase 50 hz, A.C. power supply, ( motor rating 100W, 2850 rpm automatic infrared sensing device, 1600W heating element approximate 275 cum/hr air flow wind velocity 15.5 m/sec or as per Manufacturer's specifications) Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz with inbuilt RO and nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with stainless steel body as per specification no. AP?WCR/WC, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing and fixing C.P. brass angle valve of approved quality conforming to IS:8931 (15mm nominal bore)Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing & fixing 600mm long flexible braided hose of approved quality, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing and fixing 110 mm nahani trap of rigid PVC (approved make) for S.W.R. Pipes including lubricating etc. complete, without door :

Providing and fixing 75 mm nahani trap of rigid PVC (approved make) for S.W.R. Pipes including lubricating etc. complete, without door :

Providing & fixing Stainless steel perforated grating over Nahani trap for wash basins, shower, sinks, etc, with all necessary cutting, filling, fixing & making good the services, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing and fixing rigid PVC S.W. R .110 mm dia (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socketed :

Providing and fixing rigid PVC S.W. R .75 mm dia (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socketed :

Providing and fixing rigid 110mm PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.

Providing and fixing rigid 75 mm PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.

Providing and fixing 110mm rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :

Providing and fixing 75 mm rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :

Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : 110mm

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :-110mm, etc complete

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door 75mm, etc complete

Providing and fixing R.P.V.C. vent cowl: 110mm, etc complete

Providing and fixing R.P.V.C. vent cowl: 75mm, etc complete

Providing and fixing 40mm Upvc SWR pipes Type B for wash basin, Sink and Urinal drainage outlet laid in floor & sunk, chiseling in walls etc., with necessary cutting to the required length including short pieces Assorted fittings such as Plug/Plain Tee and bend single / double Y, Offsets, vent cowl etc. jointing with solvent and giving water tightness test for the pipes laid in the sunken/ceiling suspended portion with making holes in brick walls/floor grooving & redoing the same and provide brick & clamps support whenever required necessary, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing and fixing 50 mm Upvc SWR pipes Type B for wash basin, Sink and Urinal drainage outlet laid in floor & sunk, chiseling in walls etc., with necessary cutting to the required length including short pieces Assorted fittings such as Plug/Plain Tee and bend single / double Y, Offsets, vent cowl etc. jointing with solvent and giving water tightness test for the pipes laid in the sunken/ceiling suspended portion with making holes in brick walls/floor grooving & redoing the same and provide brick & clamps support whenever required necessary etc. complete.

Supplying at store or site of work including loading, unloading and stacking at site PVC (RING FIT) pipes with elastomeric sealing ring (one per pipe) and with rubber ring socket, conforming to to IS:4985-2000,and bearing ISI mark Class 6kg/sq.cm. 75 mmOuter Dia in mm

Supplying at store or site of work including loading, unloading and stacking at site PVC (RING FIT) pipes with elastomeric sealing ring (one per pipe) and with rubber ring socket, conforming to to IS:4985-2000,and bearing ISI mark Class 6kg/sq.cm. 110 mmOuter Dia in mm

Supplying at store or site of work including loading, unloading and stacking at site PVC (RING FIT) pipes with elastomeric sealing ring (one per pipe) and with rubber ring socket, conforming to to IS:4985-2000,and bearing ISI mark Class 6kg/sq.cm. 160 mmOuter Dia in mm

Construction of manhole rectangular in shape Inside size 0.60x0.60m and 0.60m deep (with medium duty DI manhole cover & frame of size 0.60x 0.60m weighing 90kgs ) including fixing with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar. including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design.

Construction of manhole rectangular in shape Inside size 0.90 x 0.60m and 1.00m deep ( with medium duty DI manhole cover & frame of size 0.90x 0.60m weighing 105 kgs including fixing with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.)including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design.

Construction of manhole conical 0.9 m Dia , 1.5M deep in shape including cement concrete 1:2:4 ( 1 cement:2coarse sand:4 graded stone aggregate 20mm nominal size) foundation thickness of concrete 25cms and offset 15cms on both sides and first class brick work with bricks class designation 100kg/sq.cm(wire cut bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) 35cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c/c in 20 x 20 x 10cm cement concrete block 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished including providing and fixing manhole cover and frame in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) complete as per standard design.With 500 mm Dia heavy duty solid type C.I. circular cover and frame weighing not less then 230 kg

Providing and fixing square mouth S.W. gully trap grade 'A" 150 x 100 mm size P or S type complete with C.I. Grading brick masonry chamber and water light C.I. cover with frame 300x300mm size (inside) the weight of the cover to be not less than 4.53kg and frame to be not less than 2.72kg as per standard design.

Providing at store or site work non-pressure NP2 250 mm RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.

Providing at store or site work non-pressure NP2 300 mm RCC pipes of with collar joints conforming to IS:458-2003 revised as per amendment No.11 , including freight, carting, loading, unloading, stacking etc. complete.

Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non-pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete. 300

Supplying and fixing air tight FRP cover (LD) with frame of size 900 x 600 mm for manholes opening of water tanks including required accessories & materials etc. complate as per direction of engineer in charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing and fixing ASTM UPVC pipe SCH -40 ( blue/white) Outer Dia in mm 20 , conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. (All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia)

Providing and fixing ASTM UPVC pipe SCH -40 ( blue/white) Outer Dia in mm 25 , conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. (All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia)

Providing and fixing ASTM UPVC pipe,SCH -80 ( blue/white) Outer Dia in mm 50 conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft)

Providing and fixing ASTM UPVC pipe,SCH -80 ( blue/white) Outer Dia in mm 63 conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft)

Providing and fixing ASTM UPVC pipe,SCH -80 ( blue/white) Outer Dia in mm 75 conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft)

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes 15 mm outer dia CPVC pipe confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage)

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes 20 mm outer dia CPVC pipe confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage)

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes 25 mm outer dia CPVC pipe confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage)

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes 32 mm outer dia CPVC pipe confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage)

Providing and fixing ASTM UPVC pipe, SCH-80(blue)/(white) 50mm outer dia. conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work. (Underground pressurised water supply line)

Providing and fixing ASTM UPVC pipe, SCH-80(blue)/(white) 63mm outer dia.. conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work. (Underground pressurised water supply line)

Providing and fixing brass full way valve (heavy) duty with wheel 15mm nominal bore of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.)

Providing and fixing brass full way valve (heavy) duty with wheel 20 mm nominal bore of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.)

Providing and fixing brass full way valve (heavy) duty with wheel 25 mm nominal bore of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.)

Providing and fixing brass full way valve (heavy) duty with wheel 32 mm nominal bore of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.)

Providing and fixing brass full way valve (heavy) duty with wheel 40 mm nominal bore of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.)

Providing and fixing brass full way valve (heavy) duty with wheel 50 mm nominal bore of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.)

Providing and fixing brass full way valve (heavy) duty with wheel 80 mm nominal bore of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.)

Supply of inferential, dry dial, type Domestic Water Meter, suitable for horizontal installation, duly, sealed against tampering with couplings at both ends having pulse output facility compatible for the automatic reading system, conforming to IS:779-1974 and ISO 4064-2005 standards and bearing EEC/MID/OIML mark, (with latest Amendments) along with test certificate from FCRI/NABL as desired by the department. A.Class B-Multi Jet Water meters Dia in mm-50mm

Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)

Providing and fixing C.I. Strainers 'Y' type with screwed ends. Sizes in mm 40 for Water Meters including cost of all materials and labour.

C.I. Stainer 'T' (Basket) type with flanged ends Sizes in 50 mm and with stainless steel or Brass mesh with opening of 2.5mm to 3mm and suitable for operating pressure of 16 kg/cm² and test pressure of 24 kg/cm²

C.I. Stainer 'T' (Basket) type with flanged ends Sizes in 80 mm and with stainless steel or Brass mesh with opening of 2.5mm to 3mm and suitable for operating pressure of 16 kg/cm² and test pressure of 24 kg/cm²

Providing and fixing ball valve ( brass ) of approved quality : High pressure with PVC float 25 mm nominal bore

Supplying and erecting 100mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (openarea Ratio) for positive suction complete as per specification. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing & commissioning of Air release valve with filter & ball valve for water supply risers, suitable for pressure of 10 Kg/Sq.cm. including flanges / union, nuts, bolts, washer etc., complete. Pasting radium Colour band near Valve, Colour text, flow direction arrow on pipe line as per ISO standared. (appropriate tagging should be done for all valves) Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing, lowering & laying including supply of materials and labour for SN4/SN8 Rigid PVC pipes 150 mm dia. (SN4) of approved make, with necessary cutting to the required length including short pieces with assorted fittings etc. jointing with solvent and giving water tightness test for the pipes laid with making holes in brick walls/floor grooving & redoing the same and brick support whenever required necessary etc. complete. All the pipes which will be laid in soil / filling shall be properly supported at all joints, change in dia, direction.etc. works to be executed as per IS complete as per the direction of project engineer. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing, lowering & laying including supply of materials and labour for SN4/SN8 Rigid PVC pipes 200 mm dia. (SN4) of approved make, with necessary cutting to the required length including short pieces with assorted fittings etc. jointing with solvent and giving water tightness test for the pipes laid with making holes in brick walls/floor grooving & redoing the same and brick support whenever required necessary etc. complete. All the pipes which will be laid in soil / filling shall be properly supported at all joints, change in dia, direction.etc. works to be executed as per IS complete as per the direction of project engineer.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying & Fixing, installation, testing Sewage Treatment plant of 65 kld with opearting 24 hours of operating,with preatrement which includes screening,oil & grease trap,equliasation tank,secondary treatment which inlides bilogical treatment ,tube settler & disinfecation and sludge disposal sytem,Tertiary treatment as water paased thrugh series of filters,Perforated screen in MS epoxy construction ,Oil & grease trap chamber ,Equalisation tank ,Anoxic Tank ,MBBR reactors ,Tube Settler ,Clear water tank/filter feed tank ,Treated water tank ,Sludge holding tank , Sewage transfer pumps – Self priming, non clog, centrifugal ,Air blower with motor, diffuser membrane & associated equipments , Tube media for Tube settler ,Poly dosing system, Chlorine dosing system ,Filter feed pump, Pressure sand filter , Activated Carbon filter ,Interconnecting pipe & fitting, valves , Sludge pump ,Electrical panel & equipmentOzonation & UV Note -1.Stp to treated water tank parameters should meet enviroment standards. 2.STP Vendor need to take all statutaory approval regarding enviromental clerance. 3.STP vendor need to quote for all electromechanical equipment. Contractor have to submit shop drawing before to execution. This cost is excluding all civil works. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing, Fixing, Testing & Commissioning of Spray Pou-up Sprinkler,nozzles,hose, piping, valves, pumps for 2000 sq.m. landscape area including all required necessary fittings, labours all taxes if any etc. (item shall include all required irrigation plumbing work material & labour cost) Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing and commissioning automatic organic waste composting machine for 250KG/day and including all required accessories Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing & fixing Stainless steel plain grating over P-trap for urinals with all necessary cutting, filling, fixing & making good the services, etc,complete.Plain cover for urinals - Top grating size in mm - 100 x 100 Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing & commissioning of 160mm S.S.Vertical grating around at the entrance of RWP on terrace with all necessary fittings, making proper connection with cement solvent joints, cutting chase / hole in wall and bringing the same in proper condition and shape after placing the grating in right position complete as required. with material and labour etc. completeas per the direction of project engineer.

Supplying & Fixing '300 mm (12") wide channel in slope 1:200 (depth 300 to 600mm) (Basement swd channel) Ductile iron cover size : 300mm x 600mmX 25mm thk. Clear size with m.s. angle frame frame.(for basement drain channel) MS angle nosing fabricated MS angle With galvanised iron coating & Giving one coat of red oxide paint and 2 coats of approved low VOC paint , 20 mm dia. rod (round) J shaped Hook welded at each intervals for anchoring for fix grating etc. complete. item quote with Ductile iron Heavy duty grating cover & frame (Cover should be capable to take load of 10 kg/cm2)

Supplying & Fixing 600 mm (24") wide channel in slope 1:300 (depth 750 ABOVE) (ground swd channel) Ductile iron cover size : 600mm x600mm x 95mm Thk. Clear size 10 kg/cm2 capacity & Frame MS angle nosing fabricated MS angle With galvanised iron coating & Giving one coat of red oxide paint and 2 coats of approved low VOC paint , 20 mm dia. rod (round) J shaped Hook welded at each intervals for anchoring for fix grating etc. complete. item quote with Ductile iron Heavy duty grating cover & frame (Cover should be capable to take load of 10 kg/cm2) Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying & Fixing 750 mm (30") wide channel in slope 1:300 (depth 750 ABOVE) (ground swd channel) Ductile iron cover size : 750mm x750mm x 95mm Thk. Clear size 10 kg/cm2 capacity & Frame MS angle nosing fabricated MS angle With galvanised iron coating & Giving one coat of red oxide paint and 2 coats of approved low VOC paint , 20 mm dia. rod (round) J shaped Hook welded at each intervals for anchoring for fix grating etc. complete. item quote with Ductile iron Heavy duty grating cover & frame (Cover should be capable to take load of 10 kg/cm2) Make as per enclose annexure or as directed by Engineer in charge etc, complete

Earthwork in excavation in foundation pipeline trenches, drain in saturated soil upto a depth of 0.6m lift upto 1.5 m including shoring strutting, pumping/ bailing out water ,stacking the excavated soil not more than 5m clear from the edge of the excavation and returning the stacked soil in 0.15 m layers when required into plinth sides of foundation, etc. consolidating each deposited layer by ramming and watering and disposing of all surplus excavated soil within a lead upto 20 m.

EXTERNAL LIGHTING DB

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (a) SP, Cat A

Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. TPN MCB, 40 A, 10 KA, C Series, Cat A

Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required TPN MCB DB, double door, Horizontal type, 4 way ( 8 + 12), Cat A

Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (b) 40 A, Cat A

CABLES

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 25 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 Core 25 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 Core 2.5 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 Core 4 sq.mm

LIGHT FIXTURES & CABLE JUNCTION BOXES-Light Fixtures,fittings & lamps:

Supply, installation, testing & commissioning of fixtures & fittings, ceiling fans, exhaust fans, etc. complete with accessories, tube/lamp etc in on surface of slab/beam by 2 nos (minimum) of 6 mm anchor fasteners or on wall with 2 nos of wood screws, nylon plug etc., suitable supporting frame fixed with rag bolts grouted on the wall/anchor fastener on the beam/on the column & other fixing accessories etc provision & connection with 1.5 sq.mm multistranded copper conductor FRLS PVC wires etc., all as per drawing, specifications & as per the instruction of E.I.C.Note: 1) Sample fixture/fittings/lamps shall be got approved from Department and Architects with complete technical data.2) Cost of lamps to be included in installation rate.3) All fixtures shall be with low loss electronic ballast4) LM79 and LM80 reports must be submitted from a NABL accredited laboratory. 5) BIS certificate for driver as well as the luminaire must be submitted for records. Driver and luminaire shall be of same make. SITC of Pole mounting IP66, IK07, CCT 5700K Street Light fixture with die cast Aluminum housing powder coated in black with UV stablised PC IP lenses and High Operating voltage range of 140V- 270V CRI>70, THD<10% with Surge protection of 6KV SPD inside luminaire ensuring life class of 50000 burning hours @ L70B50, delivering 9100 lumens in 90W with efficacy of >110lm/W. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, installation, testing & commissioning of fixtures & fittings, ceiling fans, exhaust fans, etc. complete with accessories, tube/lamp etc in on surface of slab/beam by 2 nos (minimum) of 6 mm anchor fasteners or on wall with 2 nos of wood screws, nylon plug etc., suitable supporting frame fixed with rag bolts grouted on the wall/anchor fastener on the beam/on the column & other fixing accessories etc provision & connection with 1.5 sq.mm multistranded copper conductor FRLS PVC wires etc., all as per drawing, specifications & as per the instruction of E.I.C.Note: 1) Sample fixture/fittings/lamps shall be got approved from Department and Architects with complete technical data.2) Cost of lamps to be included in installation rate.3) All fixtures shall be with low loss electronic ballast4) LM79 and LM80 reports must be submitted from a NABL accredited laboratory. 5) BIS certificate for driver as well as the luminaire must be submitted for records. Driver and luminaire shall be of same make. SITC of Bollard light luminaire comprises of galvanized extruded mild steel pipe housing with opal polycarbonate diffuser and aluminum mounting base ensuring life class of 50000 burning hours @ L70B50, 4KV Surge protection,IP65, IK05, PF>0.95, operating temp -10°C to +45°C delivering 990 lumens in 10W with efficacy of >90lm/W. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply and installation of following sizes Cable junction box to connect 3Runs 2.5sqmm Cu armoured cable with connectors. having Weather proof, saltwater-proof, IP-65. The rate shall include a) All fixing accessories,b) Connector support like DIN rail etc Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply and installation of following sizes Cable junction box to connect 3Runs 4sqmm Cu armoured cable with connectors. having Weather proof, saltwater-proof, IP-65. The rate shall include a) All fixing accessories,b) Connector support like DIN rail etc Make as per enclose annexure or as directed by Engineer in charge etc, complete

RMU & HT METERING

Supplying, installing, testing and commissioning SF 6 insulated 33kV, 630A, 16kA/3sec, 3 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested as per electric supply company specification consisting of 3 nos. feeder with 3 LBS compliant to IEC 62271-100, 200 and 102. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing and commissioning SF 6 insulated 33kV, 630A, 16kA/3sec, 2 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested as per electric supply company specification consisting of 2 nos. feeder with 1 LBS and 1 nos. VCB compliant to IEC 62271-100, 200 and 102. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing and commissioning SF 6 insulated 33kV, 630A, 16kA/3sec, 1 way outdoor, extensible motorised SCADA compatible, internal arc tested as per electric supply company specification consisting of 1no. feeder with 1 LBS compliant to IEC 62271-100, 200 and 102.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, erecting, testing and commissioning 33 KV HT metering cubicle (compact type) approved by licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos CT having required ratio between 50/5A to 200/5A, VA10 or 15, Class 0.2S, epoxy casted 3 nos PT having ratio 33000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation .And Supply, installation, testing and commissioning of Trivector meter , Class0.2s, three phase, 3/ 4 wire, 110/240V, in polycarbonate or sheet steel body ( base mounting type) with counter display/LCD display, tested by MRT along with Test Certificates, complete as required of following capacity of make L & T (ER300P) only: 1A/5Amps. Make as per enclose annexure or as directed by Engineer in charge etc, complete

TRANSFORMER

Supplying, installing, testing & commissioning 3 phase, 33/0.433 kV, 50 Hz., 2000 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound ,without gas cushioning ,hermetically Sealed transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with on load tap changer) on load +5 to-15 in steps of 2.5%, with standard accessories complete with test certificate with losses below 5428 Watts at 50% load, 16125 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR SL.Make as per enclose annexure or as directed by Engineer in charge etc, complete

DG SETS (Make as per enclose annexure or as directed by Engineer in charge etc, complete)

Supply, Installation, Testing & Commissioning of 1000 KVA rating, Prime duty, outdoor type, silent, acoustically enclosed electric start, diesel generating set, Radiator water cooled along with day oil fuel tank as part of enclosure with fuel piping including anti vibration mounts, spring isolators, rubber pads, base frame, hardware, Batteries, Engine control panel with accessories first fill of lube oil residential silencer, flexible connection bellow / expansion joints etc. complete and with all associated equipment / work as per specifications (attached). Along with AMF panel as described below. Fuel tank with air breather and drain plug, Engine instrument panel consisting of starting switch with key/Password protection, jube oil temperature and pressure gauges, RPM indicator and hour meter with additional feature of auto start/ remote start and auto stop. Gives an alarm & trip in case of Low lub oil pressure and high Fresh water temp and high Lub oil temperatureSafety control to shut down the engine in the event of overspeed, low lube oil pressure and high engine radiator coolent temperature.Lead Acid/ semi-maintcnance free batteries of suitable ratings with connecting cables. The batteries shall be supplied dry and in uncharged condition and shall conform to relevant IS.The fuel level should be indicated with the help of fuel gauge meterFirst fill of oil and diesel over & above that required for testing as per contractDiesel shall be filled fully in tank after testing & commissioning. and shall be of maximum available capacity from manufacturerAlternator shall be self excited and self regulated of specified kVA rating in three phases at 415 Volts, 50 Hz, & 0.8 power factor and shall confirm to IS 13364(Part2)/1992 (reaffirmed 2008). The alternator shall be of brushless type only with VG-2 Grade of voltage regulation.The alternator shall be screen protected, drip proof with P21 or better degree of protection as per IS 4691 / 85 (reaffirmed 2004). It should be suitable for unbalanced loads as per IS:13364 (Part 2) / 1992 (reaffirmed 2008)DG set controller with GSM/SMS based device for alertsController with remote monitoring software and compatible with BMS systems.Factory acceptance test will be witnessed by institute representatives. Factory inspection will be carried out at manufacturer's premises by 2 engineers from Client/Consultants before dispatch. Contractor to arrange for travel, boarding & lodging if the inspection is to be done outside region. If within MMR region only transport to be arranged.2 hours of Load trails at full load and 1 hour of Full Load trails in factory to be carried out. (Cost included)Guarantee/ Warrantee as applicable for client be considered including 2 DLP post CommissioningTraining and Hand holding support to be provided to EMD staff during Commissioning / Handing Over period

Supply, Installation, Testing & Commissioning of 750 KVA rating, Standby duty, outdoor type, silent, acoustically enclosed electric start, diesel generating set, Radiator water cooled along with day oil fuel tank as part of enclosure with fuel piping including anti vibration mounts, spring isolators, rubber pads, base frame, hardware, Batteries, Engine control panel with accessories first fill of lube oil residential silencer, flexible connection bellow / expansion joints etc. complete and with all associated equipment / work as per specifications (attached). Along with AMF panel as described below.Water cooled turbo charged Diesel Generating set with CPCB-4 (OR WITH LATEST EMISSION NORMS) approved acoustic enclosure Electric stardeveloping required BHP at 1500 rpm with class A-2 or better, governing to deliver specified continuous kVA output at 0.8 power factor lag ,as per attached technical specifications The engine shall comply 1513018/1990 (reaffirmed 2005) and 15710,000 series (with latest amendments) Specific fuel consumption shalbe as per IS specification. Make: As per attached list Fuel tank with air breather and drain plug, Engine instrument panel consisting of starting switch with key/Password protection, jube oil temperature and pressure gauges, RPM indicator and hour meter with additional feature of auto start/ remote start and auto stop.Gives an alarm & trip in case of Low lub oil pressure and high Fresh water temp and high Lub oil temperatureSafety control to shut down the engine in the event of overspeed, low lube oil pressure and high engine radiator coolent temperature.Lead Acid/ semi-maintcnance free batteries of suitable ratings with connecting cables. The batteries shall be supplied dry and in uncharged condition and shall conform to relevant IS.The fuel level should be indicated with the help of fuel gauge meterFirst fill of oil and diesel over & above that required for testing as per contractDiesel shall be filled fully in tank after testing & commissioning. and shall be of maximum available capacity from manufacturerAlternator shall be self excited and self regulated of specified kVA rating in three phases at 415 Volts, 50 Hz, & 0.8 power factor and shall confirm to IS 13364(Part2)/1992 (reaffirmed 2008). The alternator shall be of brushless type only with VG-2 Grade of voltage regulation.The alternator shall be screen protected, drip proof with P21 or better degree of protection as per IS 4691 / 85 (reaffirmed 2004). It should be suitable for unbalanced loads as per IS:13364 (Part 2) / 1992 (reaffirmed 2008)DG set controller with GSM/SMS based device for alertsController with remote monitoring software and compatible with BMS systems.Factory acceptance test will be witnessed by institute representatives. Factory inspection will be carried out at manufacturer's premises by 2 engineers from Client/Consultants before dispatch. Contractor to arrange for travel, boarding & lodging if the inspection is to be done outside region. If within MMR region only transport to be arranged.2 hours of Load trails at full load and 1 hour of Full Load trails in factory to be carried out. (Cost included)Guarantee/ Warrantee as applicable for client be considered including 2 DLP post CommissioningTraining and Hand holding support to be provided to EMD staff during Commissioning / Handing Over period

Supply, Installation, Testing & Commissioning of 200 KVA rating, Standby duty, outdoor type, silent, acoustically enclosed electric start, diesel generating set, Radiator water cooled along with day oil fuel tank as part of enclosure with fuel piping including anti vibration mounts, spring isolators, rubber pads, base frame, hardware, Batteries, Engine control panel with accessories first fill of lube oil residential silencer, flexible connection bellow / expansion joints etc. complete and with all associated equipment / work as per specifications (attached). Along with AMF panel as described below.Water cooled turbo charged Diesel Generating set with CPCB-4 (OR WITH LATEST EMISSION NORMS) approved acoustic enclosure Electric stardeveloping required BHP at 1500 rpm with class A-2 or better, governing to deliver specified continuous kVA output at 0.8 power factor lag ,as per attached technical specifications The engine shall comply 1513018/1990 (reaffirmed 2005) and 15710,000 series (with latest amendments) Specific fuel consumption shalbe as per IS specification. Make: As per attached list Fuel tank with air breather and drain plug, Engine instrument panel consisting of starting switch with key/Password protection, jube oil temperature and pressure gauges, RPM indicator and hour meter with additional feature of auto start/ remote start and auto stop.Gives an alarm & trip in case of Low lub oil pressure and high Fresh water temp and high Lub oil temperatureSafety control to shut down the engine in the event of overspeed, low lube oil pressure and high engine radiator coolent temperature.Lead Acid/ semi-maintcnance free batteries of suitable ratings with connecting cables. The batteries shall be supplied dry and in uncharged condition and shall conform to relevant IS.The fuel level should be indicated with the help of fuel gauge meterFirst fill of oil and diesel over & above that required for testing as per contractDiesel shall be filled fully in tank after testing & commissioning. and shall be of maximum available capacity from manufacturerAlternator shall be self excited and self regulated of specified kVA rating in three phases at 415 Volts, 50 Hz, & 0.8 power factor and shall confirm to IS 13364(Part2)/1992 (reaffirmed 2008). The alternator shall be of brushless type only with VG-2 Grade of voltage regulation.The alternator shall be screen protected, drip proof with P21 or better degree of protection as per IS 4691 / 85 (reaffirmed 2004). It should be suitable for unbalanced loads as per IS:13364 (Part 2) / 1992 (reaffirmed 2008)DG set controller with GSM/SMS based device for alertsController with remote monitoring software and compatible with BMS systems.Factory acceptance test will be witnessed by institute representatives. Factory inspection will be carried out at manufacturer's premises by 2 engineers from Client/Consultants before dispatch. Contractor to arrange for travel, boarding & lodging if the inspection is to be done outside region. If within MMR region only transport to be arranged.2 hours of Load trails at full load and 1 hour of Full Load trails in factory to be carried out. (Cost included)Guarantee/ Warrantee as applicable for client be considered including 2 DLP post CommissioningTraining and Hand holding support to be provided to EMD staff during Commissioning / Handing Over period

Synchronisation Panel for 1no 1000KVA, 1no 750KVA and 1no 200KVA DG Sets Make as per enclose annexure or as directed by Engineer in charge etc, complete

Exhaust Piping

Providing, fixing & installing MS class-B exhaust pipe/ silencer Suitable dia as per OEM recommendation and all necessary supports fixing accessories and hardwares , The exhaust pipes be insulated with 75 mm thick mineral wool (density 1 SET 150Kg/m3) insulation wrapped in chicken mesh and clad with 26gauge aluminum sheet including all hot dip galvanized structural support as required. Shall be protected from water entering in pipe by providing elbow and damper.Make as per enclose annexure or as directed by Engineer in charge etc, complete for 1000KVA DG Set

Providing, fixing & installing MS class-B exhaust pipe/ silencer Suitable dia as per OEM recommendation and all necessary supports fixing accessories and hardwares , The exhaust pipes be insulated with 75 mm thick mineral wool (density 1 SET 150Kg/m3) insulation wrapped in chicken mesh and clad with 26gauge aluminum sheet including all hot dip galvanized structural support as required. Shall be protected from water entering in pipe by providing elbow and damper.Make as per enclose annexure or as directed by Engineer in charge etc, complete for 750KVA DG Set

Providing, fixing & installing MS class-B exhaust pipe/ silencer Suitable dia as per OEM recommendation and all necessary supports fixing accessories and hardwares , The exhaust pipes be insulated with 75 mm thick mineral wool (density 1 SET 150Kg/m3) insulation wrapped in chicken mesh and clad with 26gauge aluminum sheet including all hot dip galvanized structural support as required. Shall be protected from water entering in pipe by providing elbow and damper.Make as per enclose annexure or as directed by Engineer in charge etc, complete for 200KVA DG Set

STATUTORY APPROVALS (For All the DG sets) Electrical Inspector's Approval/CEIG from PWD-Liasion charges for obtaining approval of Statutory authorities. Required clearances from the concerned statutory authorities are in the scope of work: Preparation and submission of drawing to electrical inspector (CEA) and obtaining approval of electrical inspector. Inspection Fees (receipt to be submitted to Client). Approval from Local Pollution Control Board, Make as per enclose annexure or as directed by Engineer in charge etc, complete

ELECTRICAL PANELS / DISTRIBUTION BOARDS

TRANSFORMER SECONDARY BREAKER PANELNote: All Circuit Breaker shall have Potential free and Relay contacts for ON/OFF and Trip Indication for BMS Connectivity1 Nos. 3200 amps, 4P, 415V, 50HZ, AC, Ics=Icu=Icw = 50kA for 1 sec., MDO operated fully drawout type air circuit breaker with Microprocessor based with LSIG releases, shunt trip coil with under voltage releases ), BMS compatible hardware and software like RS 485/potential free contacts /Modbus/Bacnet card and control MCB- etc Note: Panels should have sufficient provision to terminate 8runs of 3.5c 300sqmm Al XLPE Armoured cable in comer as well as in outgoings.Three nos. phase indicating light through protected by 2 amps MCB’s. - 1 setBreaker ON / OFF / TRIP /SPRING CHARGE/TRIP CIRCUIT HEALTHY indicating lights with control MCB’s. - 1 setElectronic Digital Load Manager (LM-1) with ready RS485 communication port and MODBUS protocol. - 1 setSPDS to be considered as per SLD.Bus Bars 3200Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and Neutral electrolytic grade 99.95% purity Aluminium (Throughout the length) busbars with colour coded heat shrink sleeves supported on SMC type grip supports, 50 KA for 1 sec.1 nos. 25 amps Four Pole MCCB, 415V, 50 Hz, A.C supply and having Ics=Icu= 50 KA with. The MCCB shall be complete as per technical specifications and single line daigram. (For Line Voltage Relay)

GROUND FLOOR METERING PANEL-LHS KIOSKSNote: All Circuit Breaker shall have Potential free and Relay contacts for ON/OFF and Trip Indication for BMS ConnectivityINCOMER:1 nos. 100 amps, Four Pole MCCB with thermal magnetic based release for overload and short circuit protections having Earth fault relay with rated CTs, Shunt coil, 415V, 50 Hz, A.C supply and having Ics=Icu= 16 KA. The MCCB shall be complete as per technical specifications and single line daigram.3 nos. Phase indicating light protected by 2 amps SP MCB's.- 1 setBreaker ON / OFF / TRIP indicating lights with control MCB’s.- 1 set.Electronic Digital Load Manager (LM-1) with ready RS485 communication port and MODBUS protocol. - 1 setBUS-BAR100 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and Neutral electrolytic grade 99.95% purity Aluminium (Throughout the length) busbars with colour coded heat shrink sleeves supported on SMC type grip supports, 16 KA for 1 sec.OUTGOINGS:18 nos. 40 amps Four Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram.8 nos. 25 amps Four Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram. Make as per enclose annexure or as directed by Engineer in charge etc, complete

GROUND FLOOR METERING PANEL-RHS KIOSKSNote: All Circuit Breaker shall have Potential free and Relay contacts for ON/OFF and Trip Indication for BMS ConnectivityINCOMER:1 nos. 100 amps, Four Pole MCCB with thermal magnetic based release for overload and short circuit protections having Earth fault relay with rated CTs, Shunt coil, 415V, 50 Hz, A.C supply and having Ics=Icu= 16 KA. The MCCB shall be complete as per technical specifications and single line daigram.3 nos. Phase indicating light protected by 2 amps SP MCB's.- 1 setBreaker ON / OFF / TRIP indicating lights with control MCB’s.- 1 set.Electronic Digital Load Manager (LM-1) with ready RS485 communication port and MODBUS protocol. - 1 setBUS-BAR100 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and Neutral electrolytic grade 99.95% purity Aluminium (Throughout the length) busbars with colour coded heat shrink sleeves supported on SMC type grip supports, 16 KA for 1 sec.OUTGOINGS:10 nos. 40 amps Four Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram.6 nos. 25 amps Four Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram.

1ST FLOOR METERING PANEL-LHS KIOSKSNote: All Circuit Breaker shall have Potential free and Relay contacts for ON/OFF and Trip Indication for BMS ConnectivityINCOMER:1 nos. 200 amps, Four Pole MCCB with thermal magnetic based release for overload and short circuit protections having Earth fault relay with rated CTs, Shunt coil, 415V, 50 Hz, A.C supply and having Ics=Icu= 26 KA. The MCCB shall be complete as per technical specifications and single line daigram.3 nos. Phase indicating light protected by 2 amps SP MCB's.- 1 setBreaker ON / OFF / TRIP indicating lights with control MCB’s.- 1 set.Electronic Digital Load Manager (LM-1) with ready RS485 communication port and MODBUS protocol. - 1 setBUS-BAR200 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and Neutral electrolytic grade 99.95% purity Aluminium (Throughout the length) busbars with colour coded heat shrink sleeves supported on SMC type grip supports, 16 KA for 1 sec.OUTGOINGS:19 nos. 40 amps Four Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram.6 nos. 25 amps Four Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram.

1ST FLOOR METERING PANEL-RHS KIOSKSNote: All Circuit Breaker shall have Potential free and Relay contacts for ON/OFF and Trip Indication for BMS ConnectivityINCOMER:1 nos. 100 amps, Four Pole MCCB with thermal magnetic based release for overload and short circuit protections having Earth fault relay with rated CTs, Shunt coil, 415V, 50 Hz, A.C supply and having Ics=Icu= 16 KA. The MCCB shall be complete as per technical specifications and single line daigram.3 nos. Phase indicating light protected by 2 amps SP MCB's.- 1 setBreaker ON / OFF / TRIP indicating lights with control MCB’s.- 1 set.Electronic Digital Load Manager (LM-1) with ready RS485 communication port and MODBUS protocol. - 1 setBUS-BAR100 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and Neutral electrolytic grade 99.95% purity Aluminium (Throughout the length) busbars with colour coded heat shrink sleeves supported on SMC type grip supports, 16 KA for 1 sec.OUTGOINGS:15 nos. 40 amps Four Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram.6 nos. 25 amps Four Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram. Make as per enclose annexure or as directed by Engineer in charge etc, complete

GROUND FLOOR METERING PANEL-CENTRAL AREANote: All Circuit Breaker shall have Potential free and Relay contacts for ON/OFF and Trip Indication for BMS ConnectivityINCOMER:1 nos. 400 amps, Four Pole MCCB with thermal magnetic based release for overload and short circuit protections having Earth fault relay with rated CTs, Shunt coil, 415V, 50 Hz, A.C supply and having Ics=Icu= 36 KA. The MCCB shall be complete as per technical specifications and single line daigram.3 nos. Phase indicating light protected by 2 amps SP MCB's.- 1 setBreaker ON / OFF / TRIP indicating lights with control MCB’s.- 1 set.Electronic Digital Load Manager (LM-1) with ready RS485 communication port and MODBUS protocol. - 1 setBUS-BAR400 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and Neutral electrolytic grade 99.95% purity Aluminium (Throughout the length) busbars with colour coded heat shrink sleeves supported on SMC type grip supports, 16 KA for 1 sec.OUTGOINGS:29 nos. 40 amps Four Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram.9 nos. 25 amps Four Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram.1 nos. 25 amps Double Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram.

Providing fixing and installation of APFC PANEL 600KVAR

COMMON AREA PANELNote: All Circuit Breaker shall have Potential free and Relay contacts for ON/OFF and Trip Indication for BMS ConnectivityINCOMER:1 nos. 400 amps, Four Pole MCCB with thermal magnetic based release for overload and short circuit protections having Earth fault relay with rated CTs, Shunt coil, 415V, 50 Hz, A.C supply and having Ics=Icu= 36 KA. The MCCB shall be complete as per technical specifications and single line daigram.3 nos. Phase indicating light protected by 2 amps SP MCB's.- 1 setBreaker ON / OFF / TRIP indicating lights with control MCB’s.- 1 set.Electronic Digital Load Manager (LM-1) with ready RS485 communication port and MODBUS protocol. - 1 setBUS-BAR400 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and Neutral electrolytic grade 99.95% purity Aluminium (Throughout the length) busbars with colour coded heat shrink sleeves supported on SMC type grip supports, 16 KA for 1 sec.OUTGOINGS:7 nos. 63 amps Four Pole MCB with Icu= 10 KA. The MCB shall be complete as per technical specifications and single line daigram.16 nos. 40 amps Four Pole MCB with Icu= 10 KA. The MCB shall be complete as per technical specifications and single line daigram.4 nos. 25 amps Four Pole MCB with Icu= 10 KA. The MCB shall be complete as per technical specifications and single line daigram.7 nos. 25 amps Double Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram. Make as per enclose annexure or as directed by Engineer in charge etc, complete

FIRE EMERGENCY PANELNote: All Circuit Breaker shall have Potential free and Relay contacts for ON/OFF and Trip Indication for BMS ConnectivityINCOMER:1 nos. 400 amps, Four Pole MCCB with thermal magnetic based release for overload and short circuit protections having Earth fault relay with rated CTs, Shunt coil, 415V, 50 Hz, A.C supply and having Ics=Icu= 36 KA. The MCCB shall be complete as per technical specifications and single line daigram.3 nos. Phase indicating light protected by 2 amps SP MCB's.- 1 setBreaker ON / OFF / TRIP indicating lights with control MCB’s.- 1 set.Electronic Digital Load Manager (LM-1) with ready RS485 communication port and MODBUS protocol. - 1 set1 No. 400 amps, 4P, AUTO TRANSFER SWITCHBUS-BAR400 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and Neutral electrolytic grade 99.95% purity Aluminium (Throughout the length) busbars with colour coded heat shrink sleeves supported on SMC type grip supports, 16 KA for 1 sec.OUTGOINGS:2 nos. 63 amps Four Pole MCB with Icu= 10 KA. The MCB shall be complete as per technical specifications and single line daigram.9 nos. 40 amps Four Pole MCB with Icu= 10 KA. The MCB shall be complete as per technical specifications and single line daigram.1 no. 25 amps Four Pole MCB with Icu= 10 KA. The MCB shall be complete as per technical specifications and single line daigram.4 nos. 25 amps Double Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram.1 nos. 400 amps, Four Pole MCCB with thermal magnetic based release for overload and short circuit protections having Earth fault relay with rated CTs, Shunt coil, 415V, 50 Hz, A.C supply and having Ics=Icu= 36 KA. The MCCB shall be complete as per technical specifications and single line daigram.

EV CHARGER PANEL- 1ST PODIUM (Make as per enclose annexure or as directed by Engineer in charge etc, complete) Make as per enclose annexure or as directed by Engineer in charge etc, complete. Note: All Circuit Breaker shall have Potential free and Relay contacts for ON/OFF and Trip Indication for BMS Connectivity,Make as per enclose annexure or as directed by Engineer in charge etc, complete INCOMER: 1 nos. 630 amps, Four Pole MCCB with thermal magnetic based release for overload and short circuit protections having Earth fault relay with rated CTs, Shunt coil, 415V, 50 Hz, A.C supply and having Ics=Icu= 36 KA. The MCCB shall be complete as per technical specifications and single line daigram. 3 nos. Phase indicating light protected by 2 amps SP MCB's.- 1 set, Breaker ON / OFF / TRIP indicating lights with control MCB’s.- 1 set,Electronic Digital Load Manager (LM-1) with ready RS485 communication port and MODBUS protocol. - 1 set. BUS-BAR : 630 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and Neutral electrolytic grade 99.95% purity Aluminium (Throughout the length) busbars with colour coded heat shrink sleeves supported on SMC type grip supports, 16 KA for 1 sec. OUTGOINGS: 51 nos. 63 amps Double Pole MCB with Icu= 10 KA, Kwh Meter with suitable CTs. The MCB shall be complete as per technical specifications and single line daigram.2 nos. 63 amps Double Pole MCB with Icu= 10 KA. The MCB shall be complete as per technical specifications and single line daigram. 2 nos. 25 amps Double Pole MCB with Icu= 10 KA. The MCB shall be complete as per technical specifications and single line daigram. Make as per enclose annexure or as directed by Engineer in charge etc, complete

LIGHTING DB ,RAW POWER DB,EMERGENCY DB AND UPS DB :Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. Make as per enclose annexure or as directed by Engineer in charge etc, complete (a) SP, Cat A

LIGHTING DB ,RAW POWER DB,EMERGENCY DB AND UPS DB :Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. Make as per enclose annexure or as directed by Engineer in charge etc, complete (c) DP, Cat A

LIGHTING DB ,RAW POWER DB,EMERGENCY DB AND UPS DB :Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. Make as per enclose annexure or as directed by Engineer in charge etc, complete (d) TPN, Cat A

Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (e) TPN, Cat A Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (e) TPN, Cat A , Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and fixing following rating double pole 240 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required. (b) 63 A, Cat A , Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and fixing following rating four pole 415 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required ,Make as per enclose annexure or as directed by Engineer in charge etc, complete (a) 40 A, Cat A

Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) TPN MCB DB, double door, Horizontal type, 4 way ( 8 + 12), Cat A , Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) TPN MCB DB, double door, Horizontal type, 6 way ( 8 + 18), Cat A , Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) TPN MCB DB, double door, Horizontal type, 8 way ( 8 + 24), Cat A ,Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) TPN MCB DB, double door, Horizontal type, 12 way ( 8 + 36), Cat A , Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and fixing following way SPN sheet steel MCB distribution board Consumer Unit 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar hinged front acrylic cover for the MCB knobs detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) SPN, double door MCB DB, 4 way, (2+ 4)

Supplying and fixing following way SPN sheet steel MCB distribution board Consumer Unit 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar hinged front acrylic cover for the MCB knobs detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) SPN, double door MCB DB, 8way, (2+ 8 MODULE) Cat A, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and fixing following way SPN sheet steel MCB distribution board Consumer Unit 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar hinged front acrylic cover for the MCB knobs detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) SPN, double door MCB DB, 12 way, (2+ 12)Cat A , Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing and fixing following rating and breaking capacity adjustible 4 pole MCCB inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc as required 200 A Adjustable 35/40 KA, CAT A , Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with co nnections testing and commissioning etc as required (a) 25 A, Cat A , Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (b) 40 A, Cat A , Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (b) 40 A, Cat A ,Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB/TP MCB/FP MCB/RCCB/RCBO complete erected on provided angle iron/GI frame.Make as per enclose annexure or as directed by Engineer in charge. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness suitable for FP MCCB UPTO 250A rating complete erected on provided angle iron/GI frame. Make as per enclose annexure or as directed by Engineer in charge etc, complete

CABLES (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 35 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 50 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 70 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 95 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 120 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 150 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 240 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 300 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 25 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 2.5 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 10 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 4 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 6 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 10 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 16 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface, etc. complete as required

Supply of following size of 3 Core 185 sq.mm , HV, 33 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply of following size of 3 Core 300 sq.mm , HV, 33 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 11 KV but not exceeding 33 KV grade of size exceeding 120 sq.mm but not exceeding 400sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.Make as per enclose annexure or as directed by Engineer in charge etc, complete (b) Rocky strata

Supplying and making Indoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 33 KV grade, Make as per enclose annexure or as directed by Engineer in charge etc, complete required. 33 KV, 3 Core x 240 - 400sq.mm

Supplying and making Indoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 33 KV grade,Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required. 33 KV, 3 Core x 120 - 185 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core 2.5 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade,Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core 4 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade,Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core 10 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core 4 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core 6 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core 10 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade,Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core 16 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core 35 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core 50 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, v complete as required.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core 70 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core 95 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core 120 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core 150 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade,Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core 240 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core 300 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core 25 sq.mm PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, Make as per enclose annexure or as directed by Engineer in charge etc, complete complete as required.

LADDER TYPE TRAYS( 50mm deep) (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)

Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)

Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 600 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)

Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 1000 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(12SWG)

CABLE ENCLOSURE (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and laying (including excavation of suitable width & depth up to 90cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.Make as per enclose annexure or as directed by Engineer in charge etc, complete

POINT WIRING (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit(medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (c) Group C -- with Cat A Modular Accessories

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (h) 4 x 2.5 sq.mm + 2 x 2.5 sq.mm earthwire (25mm Conduit)

Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing 20 A 415 V TPN industrial type socket outlet with4 pole and earth metal enclosed plug top alon with 20 A, C series TP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required" (a) Cat A

Supplying and fixing 30 A 415 V TPN industrial type socket outlet with4 pole and earth metal enclosed plug top alon with 20 A, C series TP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required" (a) Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (a) 1 or 2 Module ( 75 mm x 75 mm) Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required(b) 4 Module ( 125 mm x 7 mm) Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (a) 5/6 A switch Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (c) 15/16 A switch Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (d) 3 pin 5/6 A socket outlet Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (e) 6 pin 15/16 A socket outlet Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (f) Telephone socket outlet Cat A

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (a) Cat A

LIGHT FIXTURES & FITTINGS -Supply, installation, testing & commissioning of fixtures & fittings, ceiling fans, exhaust fans, etc. complete with accessories, tube/lamp etc in on surface of slab/beam by 2 nos (minimum) of 6 mm anchor fasteners or on wall with 2 nos of wood screws, nylon plug etc., suitable supporting frame fixed with rag bolts grouted on the wall/anchor fastener on the beam/on the column & other fixing accessories etc provision & connection with 1.5 sq.mm multistranded copper conductor FRLS PVC wires etc., all as per drawing, specifications & as per the instruction of E.I.C.Note: 1) Sample fixture/fittings/lamps shall be got approved from Department and Architects with complete technical data.2) Cost of lamps to be included in installation rate.3) All fixtures shall be with low loss electronic ballast4) LM79 and LM80 reports must be submitted from a NABL accredited laboratory. 5) BIS certificate for driver as well as the luminaire must be submitted for records. Driver and luminaire shall be of same make. Make as per enclose annexure or as directed by Engineer in charge etc, complete (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

Supply and erecting of 48 inch (1200mm sweep) ceiling fan, double ball bearing type, complete with all accessories. (a) Cat A

Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories. (a) Cat A

RGBW Lienar wall-washer made up of Aluminum Alloy with powder coated and tempered glass cover, Having adjustable scale end cover for beam angle adjustment, IP66, Working temp - 10deg to 45deg, 24watt ,Make as per enclose annexure or as directed by Engineer in charge etc, complete

RGBW Floodllight made up of Aluminum Die-Casting body with powder coated and tempered glass cover, Having adjustable angle of 180degree, IP66, Working temp - 10deg to 45deg, 24watt ,Make as per enclose annexure or as directed by Engineer in charge etc, complete

RGBW Lienar wall-washer made up of Aluminum Alloy with powder coated and tempered glass cover, Having adjustable scale end cover for beam angle adjustment, IP66, Working temp - 10deg to 45deg, 72watt ,Make as per enclose annexure or as directed by Engineer in charge etc, complete

PCLM01MST4, Make as per enclose annexure or as directed by Engineer in charge etc, complete

PCLM01SLV8, Make as per enclose annexure or as directed by Engineer in charge etc, complete

PMFM01022 4 Pin DMX 1M Length Cable. Make as per enclose annexure or as directed by Engineer in charge etc, complete

PMFM01023 T Connector, Make as per enclose annexure or as directed by Engineer in charge etc, complete

EBV-250S024SV 250W, 24V DC Driver, Make as per enclose annexure or as directed by Engineer in charge etc, complete

PDBM01001, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Surface mounted IP20, IK02, CCT 5700K, Class-I batten fixture with Extruded Aluminium housing & PC Diffuser. High Operating voltage range of 140V- 270V, CRI>80, THD<15% with Surge protection of 4KV ensuring life class of 50000 burning hours @ L70B50, delivering 3600 lumens in 36W with efficacy of 100lm/W, ambient Temp. range 0 Degree to + 45 Degree C. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Recess mounting IP20 circular downlight with Aluminium Die cast housing with high transmittance PS diffuser,CCT 5700K High Operating voltage range of 140V- 270V, CRI>80 THD<10% with Surge protection of 4KV esuring life class of 50000 burning hours @ L70B50, delivering 1650 lumens in 20W with efficacy of 110lm/W.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Pathway Neon Flex : 12W/M, IP 65 including driver, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Swivel recessed mounted downlight with Aluminiumn Housing 24Watt downlight , Make as per enclose annexure or as directed by Engineer in charge etc, complete

Surface mounted IP20, IK02, CCT 5700K, Class-I batten fixture with Extruded Aluminium housing & PC Diffuser. High Operating voltage range of 140V- 270V, CRI>80, THD<15% with Surge protection of 4KV ensuring life class of 50000 burning hours @ L70B50, delivering 4400 lumens in 40W with efficacy of 110lm/W, ambient Temp. range 0 Degree to + 45 Degree C.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply and erecting of bulkhead luminaire suitable for LED lamp complete with all accessories including 1 No 10W LED lamp. Make as per enclose annexure or as directed by Engineer in charge etc, complete

EARTHING AND LIGHTNING PROTECTION (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 80mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested.The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value.Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode (a) 3 metres length electrode

Supplying and laying 8 SWG copper wire at 0.5 m belowground level for conductor earth electrode including soldering etc. as required

Supplying and laying 25 mm x 5 mm copper strip in 40 mm dia GI pipe from earth electrode as required

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long copper tube having single prong at top with 85 mm dia 3 mm thick GI base plate including holes etc. complete as required

Reverting sweating and soldering of copper/ GI tape (with another copper/ GI tape base of the finial or any other metallic object) as required

Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of all for lightning conductor complete as required ( for horizontal run)

Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of all for lightning conductor complete as required ( for verticle run)

Fixing copper /GI tape 20 mm x 3 mm thick on parapet or surface of all for lightning conductor complete as required ( for horizontal run)

Fixing copper /GI tape 20 mm x 3 mm thick on parapet or surface of all for lightning conductor complete as required ( for verticle run)

Providing and fixing testing joint made of 20 mm x 3 mm thick copper strip 125 mm long with 4 Nos of tinned brass bolts nuts check nuts and spring washers etc. complete as required

Providing and laying copper tape 32 mm x 6 mm from earth electrode directly in ground as required

Laying copper / GI tape 32 mm x 6 mm from earth electrode directly in ground as required

EXTRA LOW VOLTAGE

Supplying and drawing/fixing indoor type 0.5sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. (a) 2 Pair Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and drawing/fixing jelly filled outdoor type armoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. 20 Pair

Supplying and drawing/fixing jelly filled outdoor type armoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. 50 Pair

Supplying and drawing/fixing jelly filled outdoor type armoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. 100 Pair

Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. 20 Pair

Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. 50 Pair

Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. 100 Pair

Supplying, erecting and commissioning of 10006 Disconection type Krone Module, ITD.DOT approved, having capacity of 10 pairs with silver plated terminal contacts, complete as required.

Supply, Installation, Testing & Commissioning of 19-inch 12 Port LIU, rack mount patch panel, 1U, loaded with 6 LC SM Duplex Adaptors &12 LC-style Pigtails with Splice Tray, inclusive of all mechanical accessories with out pigtail, as per technical specification etc. as required,Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing & Commissioning of 12-core Outdoor Cable with Anti Rodent and Anti-termite properties- Corrugated Steel tape Armored, Loose-tube, Gel-filled, 9/125 Single Mode OS2 Fiber Cabel where ever required in prelaid conduits / RCC hume pipes/HDPE/DWC, whichever maybe available, as per technical specification etc. as required.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing & Commissioning of LC-LC single mode Armoured duplex fiber optic patch cord 3mtr, as per technical specification etc. as required. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (a) Cat 6

Supply, Installation, Testing & Commissioning of Single UTP CAT6 RJ-45 I/O of specified make inclusive of termination of CAT6 cable at each IO at Equipment Side, as per technical specification etc. as required. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, Testing & commissioning FM 45 Connectors with boot (CCTV)Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing & Commissioning of Duplex faceplate for mounting IO with required GI back box as per technical specification etc. as required. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing & Commissioning of CAT6 UTP RJ-45 Patch Cords Solid Conductor 7ft for Data (Rack side & User Side)- Data, as per technical specification etc.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing & Commissioning of CAT6A UTP RJ-45 Patch Cords Solid Conductor 7ft for Data (Rack side)- Data, as per technical specification etc. as required. (WIFI) Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing & Commissioning of loaded UTP CAT6 Gigabit Modular Patch Panel for 24 ports in 1U form factor as per the tender specifications, with universal A/B labeling and 110 connector terminations on rear of panel allowing for quick and easy installation of 23/24 AWG cable.-Data includes Data & Voice as per technical specification etc. as required. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply , Installation , Testing and commissioning of 42 U X 800 X 100D Indoor Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply , Installation , Testing and commissioning of 15 X 600Wx600D Indoor Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable ,Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and fixing of following 20mm sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following 25mm sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.

CLOSE CIRCUIT TELEVISION SYSTEM (CCTV) (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

SITC of Varifocal Bullet Camera (2.7-13.5mm) 1/2.8" Progressive Scan CMOS H.265+/H.265/H.264+/H.264/MJPEG Color: 0.005 Lux @ (F1.6, AGC ON), 0 lux with IR 25fps/30fps(1920×1080) VCA functions 3 streams 3D DNR BLC/HLC ICR EXIR, up to 60m Audio/Alarm IO DC12V&PoE Built-in micro SD/SDHC/SDXC slot HIK-Connect cloud service,Make as per enclose annexure or as directed by Engineer in charge etc, complete

SITC of Fixed Bullet Camera (4mm) 1/2.7 inch Progressive Scan CMOS, 1920×1080 at 25fps, 4mm Fixed lens, 0.005 Lux at F1.6, 0 Lux with IR on, ONVIF, support H.265, H.264, 120db WDR, BLC, HLC, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, White Light: up to 20 m, Support on-board storage up to 256 GB (SD card not included), Built in Microphone, IP67, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Video tampering, BIS, CE, FCC certified. Make as per enclose annexure or as directed by Engineer in charge etc, complete

SITC of Fixed Dome Camera (2.8mm) H.265+/H.265/H.264+/H.264/MJPEG , Color: 0.005 lux @(F1.6, AGC ON), 0 lux with IR, 25fps/30fps(1920×1080), VCA functions, 3 streams, 3D DNR, BLC,ICR, EXIR, DC12V&PoE, Built-in micro SD/SDHC/SDXC slot, HIK-Connect cloud service, -S:Alarm:1/1 ,Audio:1/1,onvif support,-U:build in mic, Make as per enclose annexure or as directed by Engineer in charge etc, complete

SITC of Fixed Dome Camera For Lift (2.8mm) H.265+/H.265/H.264+/H.264/MJPEG , Color: 0.005 lux @(F1.6, AGC ON), 0 lux with IR, 25fps/30fps(1920×1080), VCA functions, 3 streams, 3D DNR, BLC,ICR, EXIR, DC12V&PoE, Built-in micro SD/SDHC/SDXC slot, HIK-Connect cloud service, -S:Alarm:1/1 ,Audio:1/1,onvif support,-U:build in mic Make as per enclose annexure or as directed by Engineer in charge etc, complete

SITC of PTZ Camera (25x) Accurate human and vehicle target classification, alarm, and linked tracking based on deep learning algorithm, Support face capture. Up to 5 faces captured at the same time, 1/2.8" progressive scan CMOS, Up to 1920 × 1080@30fps resolution, Min. illumination:, Color: 0.005 Lux @(F1.2, AGC ON), B/W: 0.001 Lux @(F1.2, AGC ON), 0 Lux with IR or white light, 25× optical zoom, 16× digital zoom, 120DB WDR, HLC, BLC, 3D DNR, Defog, Regional Exposure, Regional Focus, Up to 200 m IR distance, Up to 30 m white light distance , the alarm sound within 30 m is no less than 60 dB, 24 VAC & Hi-PoE Support H.265+/H.265 video compression. Make as per enclose annexure or as directed by Engineer in charge etc, complete

SITC of 64ch Network Video Recorder: Connect Up to 64 IP Cameras, Up to 12 Megapixels Resolution, HDMI1/VGA1 and HDMI2/VGA2 outputs provided, atleast one HDMI output of 4K resolution, atleast 1 VGA output with output upto 1920 × 1080, Support H.265, H.264, Supports RAID0, RAID1, RAID5, RAID6 and RAID10, Incoming Bandwidth 384 Mbps, 8 SATA Hard Disks, 1 eSATA interface, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 14TB, 4 × USB at least 1 × USB with 3.0, Alarm I/O 16/9, RS-485, RS-232, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, BIS certified. Make as per enclose annexure or as directed by Engineer in charge etc, complete

SITC of 10TB Enterprise Hard Disk HDD,ST10000NM017B,10TB,7200,3.5,SATA

SITC of VMS Base License. Video Surveillance Base package - Including prerequisites for channel expanding, all fundamental features of video surveillance system and 64 cameras manageable.Supported:2 years free SUP,Main/Auxiliary Storage,Alarm Management,Google Map,Evidence Management, Running on Virtual Machine, 100 Users Logged In Simultaneously,Heath Monitoring/History Maintemance Data, Client Operation (e.g.Visual Tracking, Custom Window Division),etc.

SITC of VMS Channel License, Video Surveillance Expansion package Prerequisite:Video Surveillance Base package Supported?1 camera manageable.

Cat6, 4 pair, Outdoor Al armored, Double Jacketed, UTP Cable PVC/FRPVC, Anti Rodent (Black) for CCTV

SITC of 24 port Unmanaged Network PoE Switch: L2, Unmanaged, 24 Gigabit POE ports, 2 Gigabit SFP uplink port, 802.3af/at, PoE power budget 225W

SITC of 16 port Unmanaged Network PoE Switch: L2, Unmanaged, 16 Gigabit POE ports, 2 Gigabit SFP uplink port, 802.3af/at, PoE power budget 125W

SITC of 8 port Unmanaged Network PoE Switch: L2, Unmanaged, 8 Gigabit POE ports, 1 Gigabit RJ45 uplink port, 1 Gigabit SFP uplink port, 802.3af/at, PoE power budget 58W

UPS Supplying, erecting, testing & commissioning of 10 kVA capacity on line pure sine wave,PWM,IGBT based UPS with 0.9 to unity output pf ,3 phase input & 3 phase output complete with all protections as per specification no. APUPS(Without batteries)

UPS Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete Supplying and erecting 12V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete

SOLAR PV PANELS (Make as per enclose annexure or as directed by Engineer in charge etc, complet )

Supplying, installing, testing and commissioning of ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract.

EV CHARGING SYSTEM (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

Supplying, erecting, testing and commissioning of 10kW, 3 x 3.3 KW AC Electric Vehicle charger (suitable for 2/3/4 wheeler) having minimum IK08/IP 54 Protection suitable for three phase, 415V AC, 50Hz incoming and 3 nos. output as per IEC 60309 industrial sockets having capacity of output, current of 16A 240V AC at each socket with 3.5"TFT touch screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, one hour battery backup for communication, emergency push stop button and having short circuit, over & under voltage, overload, over temperature, earth leakage protection and enclosure, made of minimum 1.5mm duly RAL7035 Coated M.S, Erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification.

Supply, Installation, Testing and Commissioning 7.2 kW AC Electric Vehicle charger (suitable for 4 wheeler) having minimum IK08 & IP54 protection suitable for single phase, 230V AC, 50Hz, incoming and 1 nos. output having capacity of output current of 32A at 230V with Type two connector as per IEC 62196-2 , Interlocking arrangement & minimum 5 meter charging cable length, 3.5" TFT screen for human interface & LED light for status indication and metering for measurement of consumed energy having metering accuracy +/1%, one hour battery backup for server communication, emergency push stop button, with user interface by mobile application/QR Code/RIFD Card/Password Login and having short circuit, over & under voltage, overload,earth leakage ,Over temperature, surge protection and enclosure made of minimum 1.5mm duly RAL7035 coated M.S, erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification

FIRE ALARM SYSTEM (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

Supply installation Testing & commissioning of Microprocessor based, 600 character LCD display, alpha numeric touch keypad, Fire Alarm Panel having following features, - Networkable with Repeater panels and for Peer to Peer Networking. - 24V Battery back up of 24 hour in normal condition and 30 minute in alarm condition. - Each loop to be provided with 20% spare capacity. 125 detectors and 125 module per loop - To be integrated with Public address system for voice evacuation, lifts, Ventilation system etc. - To be integrated with Fire Fighter Communication system. Each floor Telephone jack to be provided with address. - Total Panel capacity shall be as per below quantities. - Provision for printing the event history 4000 logs. - The 24V Battery shall be capable of providing 24V supply to Hooters/Control Module. - The Panel shall be networkable on fiber optics network. The media convertor rate shall be inlcude if required. -Panel to have integrated DVC with Amplifier cabapble of handling speakers load as per boq with 8 zones requirement. . Approval: UL Listed & FM Approved Field Devices: The field devices shall have user friendly address setting. There shall not be dependancy on any special tool/programmer/software/PC to set the address to indivaidul device like detector/module.

Supply installation Testing & commissioning of Active Repeater Panel with 600 LCD display. UL Listed & FM Approved

Supply installation Testing & commissioning of Analogue Addressable Photoelectric type Smoke Detector with all mounting accessories , complete with MS Powder coated Junction Box for mounting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. UL Listed & FM Approved

Supply installation Testing & commissioning of Analogue Addressable Multisensor detector ( Photo + Thermal) with all mounting accessories , complete with MS Powder coated Junction Box for mounting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. UL Listed & FM Approved

Supply installation Testing & commissioning of Analogue Addressable Heat detector with ROR feature with all mounting accessories , complete with MS Powder coated Junction Box for mounting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. UL Listed & FM Approved

Supply installation Testing & commissioning of Addressable Monitor Module with all mounting accessories , complete with MS Powder coated Junction Box for moounting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. UL Listed & FM Approved

Supply installation Testing & commissioning of Addressable Relay Module in suitable ABS Plastic glossy Box If required Shall be complete with Pilot Relay for Tripping of Third Party Equipment, suitable for switching 5A/15A current through the Relay contacts ,with MS Powder coated Junction Box for mounting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. UL Listed & FM Approved

Supply installation Testing & commissioning of Ceiling / Wall mounted Hooter cum Strobes. The Hooter cum Strobes shall be made of ABS plastic and have the Db level of 75dbs at 10ft and a multi tone facility, Strobes intensity should be 15 to 115 Candela. With all mounting accessories , complete with MS Powder coated Junction Box for mounting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. UL Listed

Supply installation Testing & commissioning of Addressable Control Module in suitable ABS Plastic glossy Box. The module shall have supervised NAC output to connect notification devices like hooter cum strobe with MS Powder coated Junction Box for mounting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. UL Listed & FM Approved

Supply, Installation, Testing & Commissioning of Addressable Manual Pull Station/Call Point break glass type with Address Switch and all mounting accessories , complete with MS Powder coated Junction Box for mounting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. UL Listed FM Approved

Supply installation Testing & commissioning of Response Indicator with all mounting accessories , complete with MS Powder coated Junction Box for mounting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.

Supply and laying of 2C 1.5 sqmm, Multistranded Copper, FRLS, Sheilded , Armoured cable, RED in Colour.

PUBLIC ADDRESS SYSTEM (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

Supply, installation, testing and commissioning of of 6W (6W tap) Ceiling Mounted Speaker with all mounting accessories as required.

Supply,installation ,testing & Commissioning of Voice Alarm Controller with Expander (Equivalent of Bosch PVA-4CR12 Controller) having features like announcement to 12 zones expandable up to 492 zones.

Supply,installation ,testing & Commissioning of 2x500W Power Amplifire 1set (Equivalent of Bosch PVA-2P500 Power amplifier)

Supply and laying of 2C 1.5 sqmm, Multistranded Copper, FRLS, Sheilded, Twisted Pair , Armoured cable.

BUILDING MANAGEMENT SYSTEM (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

Supply, Installation, Programming, Configuration, Commissioning of BMS Server and work station Hardwares CENTRAL COMPUTER SYSTEM - SERVER Server shall be suitable for 24 * 7 operations. The system capability shall be according with 24 *7 with latest technology of minimum not limited to i7 processor, 2.4 Ghz speed with 1 TB hard disk etc . The server shall be able to handle expansion cum updating technology in future also. Integrated Intel® HD Graphics with minimum of 2GB capacity and higher if required. HDMI port ; Intel Gigabit CT Desktop PCIe Network Card , Front: (4) USB 2.0, microphone, headphone; Rear: (2) USB 2.0, (4) USB 3.0, serial, (2) PS/2; VGA, DisplayPort, RJ-45, line-in, line-out, Mouse, 104 Keys Keyboard , inbuilt Modem, 10 Gbps Ethernet Card etc. complete with power supply, 21" LCD/LED Monitor. Operating Software (OS) shall be server pack . Shall support remote management technologies.

Printer : Colour Lazer Printer of 600 dpi or better A4 size

BMS System Software : Web Based Graphical Software meeeting the requirements in the given I/O Summary and technical specifications including configuration and facility to create / provide the graphic mapping for all I/O Summary points , animate the Graphics, Navigation between pages, display of logs, changing the time zones, popup alarms, configurable password protection for Building Management System as per Specifications. Software shall be able to communicate with Bacnet, Modbus devices simultaneously, with unlimited user & Point license capacity. Same software can be utilized as programming / commissioning software of DDC, NAC etc (All required Software with original license competent with BMS software)

Integration : Third party integration for monitoring the status with necessary interface.Web Based Integrator for interfacing Modbus RTU Unit, Bacnet IP / MSTP, Open Protocol Software Integration for DG, VRF, STP, Energy Meter, Water Meter Intergration of DG , Integration of Energy Meters, Integration of Water Meters, Integration of VRF, Integration of Chillers, Integration of STP System

DDC1-(Pump Room) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

DDC2-(STP) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

DDC3- (Electrical Room in P4 level Multiplex Building) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

DDC4- (Electrical Room in Ground floor Mall Building LHS Passage) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

DDC5- (Electrical Room in Ground floor Mall Building RHS Passage) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

DDC6- (Electrical Room in 1st floor Mall Building LHS Passage) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

DDC7- (Electrical Room in 1st floor Mall Building RHS Passage) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

DDC8- (Electrical Room in Ground floor Mall Building Central part) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

DDC9- (Chiller Room P4 level Multiplex Building) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

DDC10- (Electrical Room in P4 level Multiplex Building) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

DDC11- (Electrical Room in P4 level Multiplex Building) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

DDC12- (Electrical Room in P4 level Multiplex Building) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

DDC13- (Electrical Room in P4 level Multiplex Building) DDC Controller with I/O module etc., The controllers shall be 32 bit microprocessor based standalone and net workable type with real time clock. The DDC's shall be capable of peer to peer communication without help of system interface controller or PC. with locable MS mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip current transformer, MCB, internal wiring. DDCs offered shall be with LCD display of suitable characters and function keys for local programming and control. DDC Controllers shall be with 12 Hours Battery Backup.

Field Devices duly wired to DDC: Supply, Installation, Calibration, Testing and Commissioning of Outside Temp & Humidity Sensor

Field Devices duly wired to DDC: Supply, Installation, Calibration, Testing and Commissioning of Water Tank Level Switches

Field Devices duly wired to DDC: Supply, Installation, Calibration, Testing and Commissioning of Diesel Tank Level Switches (Flam Proof)

Field Devices duly wired to DDC: Supply, Installation, Calibration, Testing and Commissioning of Water Pressure Transmitter

Field Devices duly wired to DDC: Supply, Installation, Calibration, Testing and Commissioning of Differential Pressure Switch

Field Devices duly wired to DDC: Supply, Installation, Calibration, Testing and Commissioning of Any pheripherial device as per IO Schedule or project requirement

Supply,Installation,Testing and Commissioning of 2Cx1.5 annealed tinned copper multistranded armoured shielded (Aulminium Mylar tape with ATC drain) FRLS, PVC insulated, PVC Sheathed Cable as per IS : 694 with IP 54 ABS Plastic Junction Box Din rail mounted Elmex Terminals inclusive with gland, lugs, cable termination and accessories.

Supply,Installation,Testing and Commissioning of 3Cx1.5 annealed tinned copper multistranded armoured shielded (Aulminium Mylar tape with ATC drain) FRLS, PVC insulated, PVC Sheathed Cable as per IS : 694 with IP 54 ABS Plastic Junction Box Din rail mounted Elmex Terminals inclusive with gland, lugs, cable termination and accessories.

Supply,Installation,Testing and Commissioning of 4Cx1.5 annealed tinned copper multistranded armoured shielded (Aulminium Mylar tape with ATC drain) FRLS, PVC insulated, PVC Sheathed Cable as per IS : 694 with IP 54 ABS Plastic Junction Box Din rail mounted Elmex Terminals inclusive with gland, lugs, cable termination and accessories.

Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (a) Cat 6

Supplying and fixing of following sizes of 25 mm rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required

LADDER TYPE TRAYS( 50mm deep) 150 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)

LADDER TYPE TRAYS( 50mm deep) 300 mm width X 50 mm depth with runner size 15x50x15mm, rung size 20x40x20mm with rungs at 250mm c/c.(14SWG)

ESCALATORS AND ELEVATORS ((Make as per enclose annexure or as directed by Engineer in charge etc, complete )

Passenger lifts for Peripheral kiosk (Mirror Gold Finish): SITC of Electric Traction Service/Passenger Lift(1) with ·Rated capacity :- 15 Passenger · Floors :- (5 Stops) · Travel :- Location of Lift Machine:- MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 900 mm wide x 2100 mm high · Clear Car size of ......mm wide x ......mm deep x 2250mm high · Lift shaft available having clear size of 1900mm wide x 2400 mm deep, 1800mm Pit depth, 4800mm Overhead.

Service lift SS 441 Hairline Finish: SITC of Electric Traction Service/Service Lift with · Rated capacity :- 16 Passenger· Floors :- (3Stops/3 Landings) · Travel :- Location of Lift Machine:- MRL · Rated speed :- 1 mps VS · Car/Landing door clear opening of 900 mm wide x 2400 mm high · Clear Car size of ......mm wide x ......mm deep x 2250mm high · Lift shaft available having clear size of 2100mm wide x 2600 mm deep,

Escalators from ground to first floor level: SITC of Indoor Escalator for Passenger Upward direction /Down Ward Direction , *Vertical Rise – 5000 mm, *Max. Load(Person Per Hour) -6000 to 8000 . *Drive System- VVVF Drive . *Degree of inclination -35 degrees . *Step width =1000mm., *Pit at lower end of escalator =1150 to 1200 mm from FFL, *Speed =0.5 m/s. *Horizontal Step- 2 flat steps, * 415V, 50Hz,Three Phase Supply,5.5 or higher kW Motor and 220/240V, 50Hz,Single Phase Supply,2.2kVA Illumination Power(For Skirting & Handrail Illumination -Includes Comb lighting). *Handrail in stainless steel finish(with Colour options). * Balustrade Profile/Cladding-S.S. Hairline Finish; *Balustrade Panel - Tempered Safety Glass 10 mm , *Balustrade height -1000 mm

MALL INTERNAL AND EXTERNAL SIGNAGES (Make as per enclose annexure or as directed by Engineer in charge etc, complete)

Supplying , installation, Commissioning and testing of 'Size: 16m w x 1.5m h Channel Letters made of 3mm pvdf coated ACP on sides and bottom and 5mm 040 acrylic in the front,illuminated using LEDs and waterproof, power supply , 5 years warranty on LEDs and Power Supply. "P M EKTA MALL"

Supplying , installation, Commissioning and testing of Backlit GSB Sign,3m x 5m in size, Box made of 1" x 1" GI Square Pipe frame with 3mm pvdf coated ACP on sides and back, illuminated using LEDs and waterproof power supply, 5 years warranty on LEDs and Power Supply. (8 boxes of 3m x 5m each) "UNITY MALL"

Supplying , installation, Commissioning and testing of Nonlit Signs (Internal Directional Sign) imported Aluminium profile with 3mm pvdf coated ACP with plotter cut vinyl 'Size: Customised as per site requirements as per Specfication and As directed by Engineer in charge.

Supplying , installation, Commissioning and testing of 65" touchscreen digital signage with mini pc with windows os. Self standing Stand made of GI Framework and cladded with 3mm ACP Sheets, Size: 65" diagonal screen with Self standing Stand of approx 4 feet height as per Specfication and As directed by Engineer in charge. 02 Nos on each floor from G to 4th Floor.

Supplying , installation, Commissioning and testing of P4 outdoor RGB Screen of Pixel Pitch P4 with multicolour SMD LEDs. Including Control Unit and GI Structure fabrication to support the LED Screen. 2 years Comprehensive AMC included, as per Specfication and As directed by Engineer in charge. Size: LED Screen 23.9 ft w x 13.12 ft h

PLUMBING SERVICES PUMPS AND PANELS (Make as per enclose annexure or as directed by Engineer in charge etc, complete)

Supply, installation, testing and commissioning of continuous duty submersible centrifugal non-clogging drainage pumps complete with 3 phase motor with all necessary protection and mechanical seal etc.Vendor to submit proposed pump model with duty curve. (for basement storm sump & ugr sump pump) Flow rate : 5 LPS ( 1W+1S),Head : 15_Mts ,Solid Handling : 20 MM,Location : underground pump room,Purpose : dewatering sump,MOC : CI body / impeller & shaft Cost to be inclusive of ready made electro – galvanized MS lifting chain, class C GI pipe header complete with discharge manifold, flanges, tee, elbow etc. complete including GI pipe upto the top of sump and including GI union. The installation shall be complete with all necessary indigenous accessories as required to complete the installation.Level Controller comprising of Level Switches, Float Switch, Solenoid Valve, Solenoid Valve Panel, Cables etc.

MISCELLANEOUS ITEMS

SITC of ABC Type Fire Extinguisher Cap. 6 kg Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Discharge Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, EPDM Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant), Brass forged valves with safety Pin is of SS material, Made up from 2mm thick sheet, ISI Approved IS 15683:2018. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing and fixing in position 1.1KV, 2mm thick, rubber mat of approved make and as required by local authorities and as per IS-2006. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and Installation of Automatic Boom Barrier App Dimension 340mm x 270mm x 1000mm, 230AC 50Hz AC Supply, Waterproof Grade IP 45, Motor 24v150w brushless 2-stage variable speed all copper Dc motor, Box thickness 1.5mm, Boom Length :- Straight Arm-6m, fencing Arm/Folding -4.5M, Motor Capacity 24V DC Brushless Mot. as directed by Engineer-in charge etc complete Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and Installation of Walk through door Metal Detector:Checkpost, Single Zone Meta;l Detector, Microcontroller Based Advanced SMD Technolody, Sendors with intelligent Counter ( IN/OUT/NET) , For Medium and Bigger Metal Objects, Battery Backup , Finish Metallic.as directed by Engineer-in charge etc complete ,Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying of Hand Help Metal Detector:- Validator P-7, Fixed Audio and Visual Indication, rechargageable battery ( Included) and In Built Battery charger. .as directed by Engineer-in charge etc complete ,Make as per enclose annexure or as directed by Engineer in charge etc, complete

FIRE FIGHTING WORKS

Supplying, installation, testing and commissioning of Main Fire Pump (MFP / EP) suitable for water discharge of 2280 LPM/ 137 CuM/Hr at 80 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 45 kW capacity for manual/ automatic operation and consisting of following: (a) Horizontal type, single stage, centrifugal/ split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts, matching hardware, matching suction & delivery flanges/ gaskets, etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete. Pump shall be BMS Compatible. Refer Technical Specifications.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installation, testing and commissioning of main fire pump suitable for water discharge of 2280 LPM at 80 m head driven by 60 HP or suitable HP capacity diesel engine at 2000 RPM working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150 ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete. Pump shall be BMS Compatible. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of fabricated Diesel Engine Pump Fuel Oil Day Tank from 3 mm MS sheet and 24G secondary containment as per IS:2552 of 300 liters gross capacity & 250 liters fill capacity, externally painted with two coats of synthetic enamel paint over a coat of primer & internally with oil resistant paint. The tank shall be fitted with clear glass oil level indicator, inspection hole with cover, drain valve, air vent including structural supports (painted with approved shade) for tank and fill/ return/ drain connection valves, etc.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Providing & fixing, joining & testing, of heavy class-C M.S pipe IS:1239 marked in exhaust line of 100 mm dia. Diesel pump set, including cutting, welding etc. with MS butt welded fittings, providing clamp sand proper positioning of silencer and expansion bellows with nut-bolts as required, painting the finished pipeline with heat resistant Aluminum paint and providing lagging with 50 mm thick glass wool duly secured with chicken mesh and wire.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installation, testing and commissioning of jockey fire pump suitable for water discharge of 180 LPM at 80 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW capacity for manual/ automatic operation and consisting of following : (a) Horizontal type, multi stage, end suction, back pull out, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete. Pump shall be BMS Compatible.Make as per enclose annexure or as directed by Engineer in charge etc, complete

PIPES AND PAINTING

Supplying, installing, testing & commissioning of GI ERW of 200 mm dia. pipe as per IS:3589, Grade FE410, including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, 150 mm dia Class `C', including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, 100 mm dia Class `C', including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, 80 mm dia Class `C', including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, 50 mm dia Class `C', including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of Red Oxide primer (10 SqM per Ltr 25 micron DFT). For above ground piping, Application of including provision of hand tool for surface cleaning & brush for application of primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of Synthetic enamel finish paint shade 536 in IS 5 (13.5 sqM per Ltr-25 micron). For Above ground piping. Brush for application of final paint compatible with primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Rubber Bellows

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete 200 mm dia.

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete 150 mm dia.

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete 150 mm dia. 80 mm dia

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete 150 mm dia. 50 mm dia.

Butterfly, Non Return & Gate Valves Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete 200 mm dia

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete 150 mm dia.

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete 100 mm dia.

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete 80 mm dia.

Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete 50 mm dia.

NON RETURN VALVES

Supplying, installing, testing & commissioning of double flange Non Return Valve PN 16 class of following sizes Conforming to IS: 5312 (Part-I), Universal mounting (Hroz/ Vert) having CI to IS 210Gr260 Body and Bronze IS318 Gr LTB Disc with nut bolts to IS 1363 PT1 Class 4.6, Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc. and tested to 1.5 times of working pressure in an approved manner, with tag nos as per P & ID.Make as per enclose annexure or as directed by Engineer in charge etc, complete 150 mm dia.

Supplying, installing, testing & commissioning of double flange Non Return Valve PN 16 class of following sizes Conforming to IS: 5312 (Part-I), Universal mounting (Hroz/ Vert) having CI to IS 210Gr260 Body and Bronze IS318 Gr LTB Disc with nut bolts to IS 1363 PT1 Class 4.6, Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc. and tested to 1.5 times of working pressure in an approved manner, with tag nos as per P & ID.Make as per enclose annexure or as directed by Engineer in charge etc, complete 100 mm dia.

Supplying, installing, testing & commissioning of double flange Non Return Valve PN 16 class of following sizes Conforming to IS: 5312 (Part-I), Universal mounting (Hroz/ Vert) having CI to IS 210Gr260 Body and Bronze IS318 Gr LTB Disc with nut bolts to IS 1363 PT1 Class 4.6, Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc. and tested to 1.5 times of working pressure in an approved manner, with tag nos as per P & ID.Make as per enclose annexure or as directed by Engineer in charge etc, complete 50 mm dia.

GATE VALVES

Supplying & installing gun metal Gate Valve of 50 mm dia. having threaded ends, conforming to IS: 778, ISI mark, along with G.I. threaded nipple.Make as per enclose annexure or as directed by Engineer in charge etc, complete Refer Technical Specifications

ACCESSORIES

Supplying, installing, testing & commissioning of PN 16 Cast Iron, factory made, flanged Y type strainer of 200 mm NB with SS 304 strainer having 3 mm holes with companion flange set of 2 flanges to IS 1538 and including welding of matching flange BS 10 Table D & providing fasteners to IS 1363 grade 5.6/8.8 & rubber gaskets to IS 2172 grade W/3 with standard OAR (open area ratio) for positive suction complete.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and installing Air Vessel of 300 mm dia and 1.5 mtr. in height M.S. Tank fabricated from M.S. black ERW pipe, conforming to I.S.: 3589, having 6 mm thickness, dish end at both ends, duly welded with 300 mm dia pipe, having inlet of 100 mm dia, duly fitted with 100 mm dia sluice valve and 20/25 mm dia draw in with G.M. gate valve, to be installed inside pump house along with provided M.S. angle (75 x 75 x 5 mm) tripod.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of GM body and inlet in CI, 2 way Fire Brigade connection with NRV of 7 kG/cm2 working pressure and test pressure 10.5 kG/cm2, Header of 100 mm dia, M.S. ‘C’ class pipe having 2 Nos. of 100 mm manifold for outlets with built in spring loaded NRV & 100 nb butterfly Isolation valve with 100 mm dia flange, fitted with 2 nos. of 63 mm diameter instantaneous male inlet connection is provided at street level and connected to Fire UG tank for draw out connection, complete with Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc,Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of GM body and inlet in CI, 4 way Fire Brigade Inlet connection with NRV of 7 kG/cm2 working pressure and test pressure 10.5 kG/cm2, Header of 150 mm dia, M.S. ‘C’ class pipe having 4 Nos. of 150 mm manifold for outlets with built in spring loaded NRV & 150 NB butterfly Isolation valve with 150 mm dia flange, fitted with 4 nos. of 63 mm diameter instantaneous male inlet connection is provided at street level and connected to Fire UG tank for fill the tank, complete with Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc,Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of UL/ FM approved Pressure Gauge of 100 mm dia., liquid filled 0-10 bar. Fitted with 15 mm dia. root cock valve, and G.I. pipe, elbow, snubber, process piping etc. as per requirement in an approved manner. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of UL/ FM approved Pressure Switch for pump control with 2 NO + 2 NC contacts, 12/15 mm dia. process connection for 3Cx1.5 sqmm cable, operation range 0-10 bar, with 12/15 mm dia. root valve, G.I. nipple, elbow, snubber, process piping etc. in an approved manner.Make as per enclose annexure or as directed by Engineer in charge etc, complete

PORTABLE FIRE EXTINGUISHERS

Supplying & installing of ABC Powder Cartridge Portable Fire extinguisher 6 kg capacity (21B), 35 bar Test / 15 Bar working, 4.5 M throw, 20 second discharge time, Propellant CO2 in gas cartridge, charge as per IS 4308, MS sheet deep drawn steel cylinder, sqeeze grip brass control valve, AL syphon tube, Non metallic discharge nozzle, 450 mm long PVC braided hose, pressure gauge, hose holder, conforming to IS 15683 / IS 2190:2010, portable at appointed location on wall/ column mounted brackets, clamps & other accessories.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying & erecting of CO2 type extinguisher, 4.5 kg capacity (21B), 250 Bar Test / 60 Bar storage, 2M min throw, 12 second discharge time, Propellant CO2 in gas cartridge, charge as per IS 15222, Seamless steel tube cylinder to IS 7285, sqeeze grip brass control valve to IS 3224, AL internal discharge tube, Poly Ethylene discharge nozzle, 450 mm long PVC braided hose, safety release, seal temper indicator, pressure gauge, hose holder & conforming to IS 15683 /IS 2190:2010. portable at appointed location on wall/ column mounted brackets, clamps & other accessories.Make as per enclose annexure or as directed by Engineer in charge etc, complete

ELECTRICAL FIRE PANEL (Make as per enclose annexure or as directed by Engineer in charge etc, complete)

MISCELLENEOUS WORKS

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 core 35 sq.mm,Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 1.5 Sq.mm, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.3 Core 4 Sq.mm,Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 Core 1.5 Sq.mm, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 Core 6 Sq.mm, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. Make as per enclose annexure or as directed by Engineer in charge etc, complete-3 x 1.5 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. Make as per enclose annexure or as directed by Engineer in charge etc, complete-3 x 4 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. Make as per enclose annexure or as directed by Engineer in charge etc, complete-3 x 35 sqmm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.Make as per enclose annexure or as directed by Engineer in charge etc, complete-4 x 1.5 sqmm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.Make as per enclose annexure or as directed by Engineer in charge etc, complete-4 x 6 sqmm

Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.Make as per enclose annexure or as directed by Engineer in charge etc, complete 300 mm width 50 mm depth

Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.Make as per enclose annexure or as directed by Engineer in charge etc, complete 150 mm width 50 mm depth

Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.Make as per enclose annexure or as directed by Engineer in charge etc, complete -300 mm width 50 mm depth

Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.Make as per enclose annexure or as directed by Engineer in charge etc, complete -150 mm width 50 mm depth

Supplying, fabricating & installing of M.S. Support, for MS piping supported on Brick wall/ RCC wall/ slab consisting with suitable size of mild steel angles, flat plate, channels, nut bolts etc..along with anchor, rod, etc. complete as per drawing.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, Installing, Testing and Commissioning of Dial type water level indicator with potantial free contacts for underground RCC water tank up to 3.0 M depth comprising float in side a SS stilling well attached to SS rope & other end attached to drum with tensioned spring operating Red pointer thriugh a gear mechanism on powder coated Al dial with black graduations & numerals having 10mm accuracy complete with 2 nos 5A/230V AC adustable contacts & 4-20 mA transmitter with 2% accuracy.Make as per enclose annexure or as directed by Engineer in charge etc, complete

INTERNAL & EXTERNAL HYDRANT SYSTEM

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications,Make as per enclose annexure or as directed by Engineer in charge etc, complete -150 mm dia

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications,Make as per enclose annexure or as directed by Engineer in charge etc, complete -100 mm dia

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications,Make as per enclose annexure or as directed by Engineer in charge etc, complete -80 mm dia

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications,Make as per enclose annexure or as directed by Engineer in charge etc, complete -25 mm dia

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For underground, Fabrication of pipe in lengths to suit site condition & welding after bevelling pipes & using 3.15 mm electrode for root run & 2.5 mm for subsequent runs including taking & grinding including all fittings & providing rectifier welding machines with approved make electrodes, underground erection in excavated pipe trenches at 1M hydrotesting at 1.5 x working pressure before wrap coat & commissioning after 100% length holiday testing & radiography of 10% insitu joints subject to minimum 1. Make as per enclose annexure or as directed by Engineer in charge etc, complete -150 mm dia

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For underground, Fabrication of pipe in lengths to suit site condition & welding after bevelling pipes & using 3.15 mm electrode for root run & 2.5 mm for subsequent runs including taking & grinding including all fittings & providing rectifier welding machines with approved make electrodes, underground erection in excavated pipe trenches at 1M hydrotesting at 1.5 x working pressure before wrap coat & commissioning after 100% length holiday testing & radiography of 10% insitu joints subject to minimum 1. Make as per enclose annexure or as directed by Engineer in charge etc, complete -100 mm dia

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For underground, Fabrication of pipe in lengths to suit site condition & welding after bevelling pipes & using 3.15 mm electrode for root run & 2.5 mm for subsequent runs including taking & grinding including all fittings & providing rectifier welding machines with approved make electrodes, underground erection in excavated pipe trenches at 1M hydrotesting at 1.5 x working pressure before wrap coat & commissioning after 100% length holiday testing & radiography of 10% insitu joints subject to minimum 1. Make as per enclose annexure or as directed by Engineer in charge etc, complete -80 mm dia

Supplying, installing, testing & commissioning of Bituminous Primer (200 gms/SqM). For under ground piping. Application of including provision of hand tool for surface cleaning & brush for application of primer. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of 2 mm thick tape to IS 10221 App B, tar based polymeric mix based on high tensile strength HMHDPE thermofusible material in 500 mm width. For Under ground piping. Application of including provision of LPG gas in cylinders & nozzle with piping, wrapping in 2 layers in oppostite direction with 15% overlap & thermal fusing in situ.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of Red Oxide primer (10 sqM per Ltr 25 micron DFT). For above ground piping, Application of including provision of hand tool for surface cleaning & brush for application of primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of Synthetic enamel finish paint shade 536 in IS 5 (13.5 sqM per Ltr-25 micron). For Above ground piping. Brush for application of final paint compatible with primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN10 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 5155 of following sizes, including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID.Make as per enclose annexure or as directed by Engineer in charge etc, complete -150 mm dia

Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN10 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 5155 of following sizes, including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID.Make as per enclose annexure or as directed by Engineer in charge etc, complete -100 mm dia

Supplying, installing, testing & commissioning of forged brass 20 mm dia. Air Release Valve, 8.8 bar System pressure, full bore, forged brass body/ Chamber/ Cover- IS 6912 Gr. FLB, Float/ Lock/ Hinge/ Pin- Polypropylene, Spring SS304, Ring-Nitrile, Strainer-Plastic and with tag nos as per P & ID.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying & erecting of bronze Ball Valves of 25 mm dia., full bore, two pieces, Quarter turn, Mild Steel lever operated with tag nos as per P & ID.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of wall/ column/ ground mounted Outdoor/ Indoor Hose Cabinet of 16 gauge, CRCA sheet of 450mm x 450mm ht x 250mm suitable to house 1 no, 15 M hoses, branch pipe and nozzle with 4 mm thick glass visor, industrial key lock, chrome plated double leaf door handles, internal 2 coats of synthetic enamel white paint in 25 micron DFT each & 2 coats external synthetic enamel paint of 25 micron DFT in shade 536 of IS 5. The work includes Fabration & erection of ground mounted back frame steel structure or wall mounted with painting as also support grouting as per the site condition @ installing so that bottom of box is 900 mm above ground.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of SS Twin Headed Hydrant Valve, oblique type double outlet, with a flow of 900 LPM @ 7 bar flow having 63 mm instantaneous female coupling outlet & fitted with accessories of cap, chain etc. to IS 5290. Double outlet hydrants on 80 nb @ height of 1.2 M above ground including providing & welding of matching flange to BS 10 Table F,providing fasteners to IS 1363 grade 5.6/8.8 & rubber gaskets to IS 2172 grade W/3.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of SS Single Headed Hydrant Valve, oblique type single outlet, with a flow of 900 LPM @ 7 bar flow having 63 mm instantaneous female coupling outlet & fitted with accessories of cap, chain etc. to IS 5290. Single outlet hydrants on 80 nb @ height of 1.2 M above ground including providing & welding of matching flange to BS 10 Table F,providing fasteners to IS 1363 grade 5.6/8.8 & rubber gaskets to IS 2172 grade W/3.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying & installing wall mounting Swinging type Hose Reel Drum complete with hub, sides-powder coated finish in red, wall bracket made out of 16 guage CRCA sheet fitted with 19 mm dia, 30 m long rubber tubing confirming to IS 444 with 24 LPM flow & 6 M throw SS 304 jet nozzle to IS 8090 fitted with SS shut off valve to IS 778, fitted in wall/ structure as the case may be with fabration & erection of ground/ floor/ wall/ column mounted steel structure with painting.Ball Valves of 25 mm dia., are included 25 mm NB pipe included in piping item.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of RRL hose pipes 63 mm dia, 15 m in length, Type-A, reinforced rubber lined, to IS 636 complete with male female instantaneous copper wire bound coupling of 63 nb size in SS 304 conforming to IS 903. hoses in external/ internal hose cabinet.

Supplying, installing, testing & commissioning of SS 304 branch pipe of 63 mm x 42.5 fitted & to IS 903 with SS 304 Jet nozzle with 42.4 mm x 20 mm size having 6 M throw & to IS 903. branch pipe in external/ internal hose cabinet.

Supplying, installing, testing & commissioning of GM body and inlet in CI, 4 way Fire Brigade connection with NRV of 7 kG/cm2 working pressure and test pressure 10.5 kG/cm2, Header of 150 mm dia, M.S. ‘C’ class pipe having 4 Nos. of 150 mm manifold for outlets with built in spring loaded NRV & 150 nb butterfly Isolation valve with 150 mm dia flange, fitted with 4 nos. of 63 mm diameter instantaneous male inlet connection is provided at street level and connected to Hydrant water header.Make as per enclose annexure or as directed by Engineer in charge etc, complete

AUTOMATIC SPRINKLER SYSTEM

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete -150 mm NB

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete -100 mm NB

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete -80 mm NB

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete -65 mm NB

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete -50 mm NB (threaded fittings)

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete -40 mm NB (threaded fittings)

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete -32 mm NB (threaded fittings)

Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.Make as per enclose annexure or as directed by Engineer in charge etc, complete -25 mm NB (threaded fittings)

Supplying, installing, testing & commissioning of Red Oxide primer (10 SqM per Ltr 25 micron DFT). For above ground piping, Application of including provision of hand tool for surface cleaning & brush for application of primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of Synthetic enamel finish paint shade 536 in IS 5 (13.5 sqM per Ltr-25 micron). For Above ground piping. Brush for application of final coat compatible with primer in 2 coats each of 25 micron DFT.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of Pendant/ Upright / Recessed, UL/FM certified, SRSC sprinklers, chrome finish, K-factor 80 @ 0.5 bar (2.25 LPM @ 84 SqM), Temperature 58 Deg C, 4.5M x 4.5M, 1/2" NPT, including olet fittings & rosette plates.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of 150 mm dia. constant pressure Alarm Valve UL listed, flange x flange, suitable for vertical installation on Sprinkler riser, Housing/ Cover/ Clapper Ductile Iron, Seat SS, Gaskets/ Seat EPDM, body flanges drilled to ANSI 16.5 # 150 complete with hydraulic & alarm trim with matching flanged drilled to complete with Test & Alarm trim & providing & welding of matching flanges to BS10 Table D, providing fasteners to IS 1363 grade, 5.6/8.8 & rubber gaskets to IS 2172 grade W/3. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN10 class of 150 mm dia, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 5155, including provision & welding of matching flange to BS10 Table F, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commisssioning of insertion type vane Flow Switch UL listed pipe insertion type suitable for 30 bar pressure for velocity up to 6 M/Sec, trigger flow of 15 LPM with IP 55 switch box having 2 SPDT contacts rated at 1.5 A, 24 V DC. complete with all accessories.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing and commissioning of Test and Drain valve of 50 mm dia threaded brass body, ball type, suitable to k-factor 80, sight glass, between sprinkler header & 50 mm dia. drainage line including piping connections, cutting, threading etc, complete as required.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of Braided SS Flexible Sprinkler drops 1200 mm with 1" inlet nipple BSPT, 1/2" outlet reducer BSPT, 700 mm square support bar & bracket, complete & UL listed.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying, installing, testing & commissioning of forged brass 20 mm dia. Air Release Valve, 8.8 bar System pressure, full bore, forged brass body/ Chamber/ Cover- IS 6912 Gr. FLB, Float/ Lock/ Hinge/ Pin- Polypropylene, Spring SS304, Ring-Nitrile, Strainer-Plastic.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying & erecting of bronze Ball Valves of 25 mm dia., full bore, two pieces, Quarter turn, Mild Steel lever operated.Make as per enclose annexure or as directed by Engineer in charge etc, complete

PORTABLE FIRE EXTINGUISHERS

Supplying & installing of ABC Type Fire Extinguisher Cap. 6 kg Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Discharge Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, EPDM Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant), Brass forged valves with safety Pin is of SS material, Made up from 2mm thick sheet, ISI Approved IS 15683:2018.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying & installing of CO2 High Pressure Portable 4.5 kg Fire Extinguisher, filled with Co2 Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 55B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2018 and ISI marked. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying & installing of Mechanical Foam stored pressure type 9 ltr. Fire Extinguisher filled with AFFF Foam confirms to IS 4989 (Part-II). Applicable fire class A & B, UTGS Pressure Gauge, Discharge Time 35 Sec, Controllable discharge mechanism, Jet Range 7 Meters, Average Discharge is 95%, Fire Rating- 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, Controllable discharge mechanism with EPDM Hose & Air aspirated Nozzle, External Pure polyester powder coated (UV resistant) and Internal Plastic lining, Brass forged valves with safety Pin is of SS material, Made up from 2 mm thick sheet, As pe IS 15683:2018 and ISI Marked. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Earthwork in excavation in foundation pipeline trenches, drain in saturated soil upto a depth of 0.6m lift upto 1.5 m including shoring strutting, pumping/ bailing out water ,stacking the excavated soil not more than 5m clear from the edge of the excavation and returning the stacked soil in 0.15 m layers when required into plinth sides of foundation, etc. consolidating each deposited layer by ramming and watering and disposing of all surplus excavated soil within a lead upto 20 m.

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Constructing RCC pedestal for above ground piping (top above 0.45m from GL), including excavation, PCC, Concrete, shuttering, plastering above ground, steel, ISMC 150 on top of concrete pedestal, backfilling and complete as per drawing & engineer.

Supplying, fabricating & installing of M.S. Support, for MS piping supported on Brick/ Concrete compound wall consisting with suitable size of mild steel angles, channels, flat plate, nut bolts etc..along with anchor, rod, etc. complete as per drawing & engineers instructions. The design shall consider span, weight of water filled pipe, cantilever arm etc. The structure shall be painted with 1 coat primer & 2 coats MIO & Final coat as explained elsewhere under painting.

HVAC WORKS-WATER COOLED 'SCREW' CHILLER

Supply, Installation, Testing & Commissioning of Chiller Plant Manager compatible with above chillers (3 Nos. 335 TR) & as per IO Summary attached. (Note: The plant manager to be in the scope of Chiller OEM and shall configure the equipments as per IO summary). Chiller plant manager for controlling all chiller plant equipments complete in all respect including approved cabling for below mentioned chiller plant equipments:a) On-off operation of chiller, cooling tower fans, condenser pumps and chiller pumps, b) On-off (close-open) control of motorised isolation valve at condenser, evaporator,c) Sequencing and scheduling of operation of chillers, pumps and cooling tower fans,d) Sequencing and scheduling of load sharing between chillers for optimum power consumption,e) All hardware and software required for the total system operation,f) IBMS integrator,Plant manager with hardware and software for the operation of below equipments,a) 4 nos. Chiller Packages,b) 4 nos. Primary feed Pumps,c) 4 nos. Secondary feed Pumps,d) 4 nos. Condenser Water Pumps,e) 4 nos. Cooling Tower,f) Other operations as per BMS IO Summary,All Required Panel and Cables prices included with Price.

CHILLED WATER PUMP SKID

Supply, Installation, testing & commissioning of Chilled water Pumps Skids as per specifications mentioned below. Please refer Pump Data sheets for more details. All Motor shall be energy efficient type 1 (IE3) with efficiency not less than IS-12615 Motor Ratings & Efficiencies shall be in line with ECBC Code 2017. Factory made chilled water pump skid for Primary Fixed Speed Pump for 3 Nos. (2W+1S) complete with SS/Bronze Impeller & Mechanical Seal, with Split casing/End Suction Pumps , each capable of delivering 50.72 LPS at 25 meter head, 3 nos.Y-Strainers, 6 Nos. Butterfly Valves, 3 Nos. Non-Return Valve, 3 Nos. Combo Digital gauge , 3 Nos. 25mm ball valve for Drain. The skid shall have 200 mm Dia. Individual pump piping . The entire skid shall be mounted on a 'C' channel base frame with vibration isolators.Antivibration Bellows should be provided at inlet & outlet of each Pump. The entire skid shall be coated with Zinc-cromate primer coating and then painted with enamel paint. The entire skid shall be insulated with 32 mm XLPE / Nitrile Rubber Chemically /Physically Crosslinked Insulation with Alufoil capable of UV Protection properties and finally finished with 26 gauge aluminium cladding. All Required Valves, Panel and Cables prices included with pump Price.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, testing & commissioning of Chilled water Pumps Skids as per specifications mentioned below. Please refer Pump Data sheets for more details. All Motor shall be energy efficient type 1 (IE3) with efficiency not less than IS-12615 Motor Ratings & Efficiencies shall be in line with ECBC Code 2017. Factory made chilled water pump skid for Condenser water pumping for 3 Nos. (2W+1S) complete with SS/Bronze Impeller & Mechanical Seal, with Split casing/End Suction Pumps , each capable of delivering 63.4 LPS at 25 meter head, 3 nos.Y-Strainers, 6 Nos. Butterfly Valves, 3 Nos. Non-Return Valve, 3 Nos. Combo Digital gauge , 3 Nos. 25mm ball valve for Drain. The skid shall have 200 mm Dia. Individual pump piping . The entire skid shall be mounted on a 'C' channel base frame with vibration isolators.Antivibration Bellows should be provided at inlet & outlet of each Pump. All Required Valves, Panel and Cables prices included with pump Price.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, testing & commissioning of Chilled water Pumps Skids as per specifications mentioned below. Please refer Pump Data sheets for more details. All Motor shall be energy efficient type 1 (IE3) with efficiency not less than IS-12615 Motor Ratings & Efficiencies shall be in line with ECBC Code 2017. Factory made chilled water pump skid for Secondary Veriable Speed pump. 3 Nos. Pump (2W+1S). The Skid shall be complete with 3 Nos. Pumps with C.I. Body, SS/Bronze Impeller & Mechanical Seal, each capable of delivering 50.72 LPS at 35 meter head, 3 nos.Y-Strainers, 6 Nos. Butterfly Valves, 3 Nos. Non-Return Valve, 3 Nos. Combo Digital gauge , 3 Nos. 25mm ball valve for Drain. The skid shall have 200 mm Dia. Individual pump piping. The entire skid shall be mounted on a 'C' channel base frame with vibration isolators.Antivibration Bellows should be provided at inlet & outlet of each Pump. The entire skid shall be coated with Zinc-cromate primer coating and then painted with enamel paint. The entire skid shall be coated with Zinc-cromate primer coating and then painted with enamel paint. The entire skid shall be insulated with 32 mm XLPE / Nitrile Rubber Chemically /Physically Crosslinked Insulation with Alufoil capable of UV Protection properties and finally finished with 26 gauge aluminium cladding. (The VFD starter Panel for Secondary pump to be included in the main hvac panel). All Required Valves, Panel and Cables prices included with pump Price.

Supplying, installing, testing and commissioning of VARIABLE SPEED PUMPING SYSTEM consisting of Variable frequency drive (VFD) for each Secondary Variable pump, one dedicated microprocessor based pump controller housed within the enclosure of one of the VFD with parallel pumping, software duly down loaded and single / multiple differential pressure sensor / transmitters along with complete control cabling from transmitter to VFD Panel as per the site requirement. The entire system along with primary variable pumps as described under item 1 must be sourced from single manufacturer only, to ensure unit responsibility. Necessary factory test certificates for entire system shall be submitted along with the equipment. Sensor / Transmitters as described in specification. System shall be BMS compatible with open protocol communication port, so that complete data can be transported to remote IBMS console.The system shall be complete in all respects and suitable for following motor ratings : Motor Rating - 33 KW (2W + 1SB) for Secondary Pumps Make as per enclose annexure or as directed by Engineer in charge etc, complete

COOLING TOWER

Supply, Installation , Testing and commissioning of Induced Draft Cooling Tower with multi Cell complete with FRP Basin, Base Supports in GI, Munters Fills, Nozzels, FRP Moulded Fan, ECBC Code 2007 efficient Fan Motor (IS-12615) at 1400 RPM, Inlet & Outlet & Drain Connections. The Cooling Tower Shall be CTI Approved with advanced drift eliminators. The Cooling Tower shall be of 418 TR Tower capacity / 335 TR AC Capacity working at Goa. The inlet water would be at 35.70 Deg.C and the basin water should be at 30.9 Deg.C. The Cooling tower shall have 1 Fan in each cell, with least power consumption. The total flow rate through cooling tower shall be 1005 GPM. All Required Valves, Panel and Cables prices should be included. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Closed Expansion Tank with Expansion Vessel and Pressurising Pumps (1 working + 1 standby). The tank capacity to be calculated as per the system volume. Expansion tank to be of MS Construction with UV STabilised XLPE Insulation 32 mm thick class 'O' for fire & covered with UV Stabilised Protection, suitable for 1608 GPM / 101.45 LPS for 2 Nos. 335 TR (2W + 1S) Watercooled Screw Chillers. The insulation shall be factory laminated with UV Stabilised Protection, with superior workmanship. The insulation shall be finally finished with 26 Gauge aluminium cladding, for Physical & UV Protection. All Required Valves, Panel and Cables prices should be included with pump Price. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Air Seperator for Chilled Water in MS construction with SS internal perforated sheet, with XLPE Insulation with Alu Foil / UV Protection insulation of 32 mm thick class 'O' for fire & covered with 26 Gauge Aluminium Cladding with superior workmanship and necessary valves etc., suitable for the following flow rates. 101.45 LPS. The pipe insulation shall be factory laminated with Alufoil, with superior workmanship.Make as per enclose annexure or as directed by Engineer in charge etc, complete

AUTOMATIC TUBE CLEANING SYSTEM

Supply, Installation, Testing & Commissioning of online Tube Cleaning System as recommended by the manufacturer, complete with all necessary Piping, Valves, (Balls / Brushes), Diverter Valves, etc., all fitting deemed necessary for trouble free operation of the tube cleaning system. Kindly note that this shall ensure clean heat exchangers and hence allowing maximum efficiency and minumum approach. The system shall be 1:3 , Make as per enclose annexure or as directed by Engineer in charge etc, complete

CEILING SUSPENDED AHU - Supply, Installation , testing & Commissioning of Chilled Water Horizontal/Vertical, Top/Side Discharge, Floor mounted/Ceiling Suspended Air Handling Unit of mentioned capacity. Double skin with blower fan,cooling coil, SS condensate pan and air filters. Housing / Casing to be of Double Skin 43 mm thick, CFC Free PUF injected (Density: 40 kg / Cu. m.) using aluminium extrusion, Thermal break Al profile with thermal barrier,The panels shall be made of 1.2 mm galvanized pre coated sheet on out side and 0.8 mm galvanized sheet inside CFC Free Poly Utherane Foam between two metal panels for addittional rigidity,Cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of min 6 row deep. Di-electric union to be used in case of dissimilar metal connection.,Fan static calculation to be provided by the Vender before ordering AHU.,IE3 Motor For energy efficiency,Motors to be standard 3 phase 415 V 50 Hz, IP 55,Multi row cooling coils having anti-corrossive hydrophilic coating Aluminium fins,Coil Face velocity to be 500 fpm. Coil frame shall be SS 304,Efficient Air Filters (50 MM thick) equivalent to EU-4 of EN-779 & MERV 8 prefilter specifications. Filter efficiency shall be 90% down to 3.0-10 micron,Performance as per ASHRAE 52.1,Easily Cleanable & washable,Inspection Door with Safety Feature & Limit Switch,Weather proof lights inside fan section,Fan motor based shall be properly earthed,Flexible fire retardant double canvass connections, volume control damper Connections designed so as to prevent fan vibration being transmitted to ductwork with noise in conditioned space,Supply and Installation of Valve Assembly for AHU with microprocessor based control, built in PICV, valve controllers, Thermostats, Butterfly Valves, strainers, drain pumps.,Including Return Air sensor with corded remote and its control wiring.,Noise Level as per statutory requirements within limits prescribed (upto 55 dB at 3 m distance),AHU Complete with AHU Electric Panel,AHU Electric Panel to have electric power provision with incomer & outgoing section,Electrical Contractor will provide power to AHU Panel at Incomer Side,Rest electrical distribution is in HVAC Vendor Scope,Provision of spare to be kept in AHU Panel,Earthing till AHU Room will be provided by Electrical Contractor,Rest earthing distribution is in HVAC Vendor Scope,AHU Panel to have Emergency Auxillary Contacts for operation mentioned below,In case of fire, fire alarm panel will give "1 No." of DC signal to AHU Panel through "Control Module",On receipt of signal from Fire Alarm Panel the AHU Panel trip the AHU,The Power Cabling & design between AHU Panel Contacts to Trip AHU is incl. in HVAC Vendor scope,Power cabling shall be 4C, copper conductor, armoured cable from Starter Panel to AHU motor with single compression gland. Control cabling, as applicable shall be copper conductor, armoured cable for 2 way valve operation between sensor, actuator etc. Cabling to run within suitable sized cable tray / trunking,Necessary temperature sensor to be incl. in cost with associated wiring.,AHU Panel to have potential free contacts for taking AHU Incomer Trip Status and on/Off Command on BMS,Supply, drain connections, with Drain Pump only for Ceiling suspended. stainless steel (18G) drain pan insulated sandwitch with PUF insulation, auto purge/Ball valve wherever required

Supply, Installation , testing & Commissioning of Chilled Water Horizontal/Vertical, Top/Side Discharge, Floor mounted/Ceiling Suspended Air Handling Unit of mentioned capacity. Ground & 1st Floor (Common Area) AHU-1- 16 TR , 6400 CFM,Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation , testing & Commissioning of Chilled Water Horizontal/Vertical, Top/Side Discharge, Floor mounted/Ceiling Suspended Air Handling Unit of mentioned capacity .Ground & 1st Floor (Common Area) AHU-2- 5 TR , 2000 CFM,Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation , testing & Commissioning of Chilled Water Horizontal/Vertical, Top/Side Discharge, Floor mounted/Ceiling Suspended Air Handling Unit of mentioned capacity.2nd Floor (Lobby Area) AHU-1- 12 TR , 4800 CFM, Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation , testing & Commissioning of Chilled Water Horizontal/Vertical, Top/Side Discharge, Floor mounted/Ceiling Suspended Air Handling Unit of mentioned capacity .3rd Floor (Lobby Area) AHU-1- 12 TR , 4800 CFM, Make as per enclose annexure or as directed by Engineer in charge etc, complete

CHILLED WATER CASSETTE UNIT

Supply, Installation, testing & Commissaioning of 4 way Chilled water Cassette Units with Valve Assembly Cassette Units with microprocessor based control, built in PICV, valve controllers, Thermostats, Butterfly Valves, strainers, drain pumps, drain pan. Cassette shall be driven on single phase 230V, AC, 50 Hz. Supply. Shall have direct driven fan driven assembly with 3 speed motor, filter, mounting accessories, vibration isolators etc. Motor shall be protected with thermal overload protection with proper heat dissipation assembly. Cost is incl. of cordless remote control. Shall have provision for hard wired contacts monitoring through BMS.Electrical Contractor shall provide the MCB/ switch socket near to indoor unit. Power Copper conducting cabling from MCB/ switch socket to indoor unit including supply & fixing of plug top if required to match the receptacle provided. (Avg. Length 5 Rmt.) Reception- 3.0 TR, Make as per enclose annexure or as directed by Engineer in charge etc, complete

VALVES SET FOR KIOSK,SEMINAR HALL & VINTAGE

Supply, Installation, Testing & Commissioning of Factory Made Chilled water Valve set in 16 Gauge Copper Piping complete with 2 Nos. Ball Valves of 25mm size. The Valve set shall be used for Fully closed chiled water supply and return Line. which goes to the Non Common area (Kiosk,Seminar Hall,Shops and Museum). The entire skid shall be Insulated with 25mm thick Nitrile Rubber. The pipe insulation shall be factory laminated with Armachek 'GC' / Equivalent Glass Cloth, with superior workmanship. Make as per enclose annexure or as directed by Engineer in charge etc, complete -Ball Valve Dia-25mm

Supply, Installation, Testing & Commissioning of Factory Made Chilled water Valve set in 16 Gauge Copper Piping complete with 2 Nos. Ball Valves of 25mm size. The Valve set shall be used for Fully closed chiled water supply and return Line. which goes to the Non Common area (Kiosk,Seminar Hall,Shops and Museum). The entire skid shall be Insulated with 25mm thick Nitrile Rubber. The pipe insulation shall be factory laminated with Armachek 'GC' / Equivalent Glass Cloth, with superior workmanship. Make as per enclose annexure or as directed by Engineer in charge etc, complete -Ball Valve Dia-32mm

Supply, Installation, Testing & Commissioning of Factory Made Chilled water Valve set in 16 Gauge Copper Piping complete with 2 Nos. Ball Valves of 25mm size. The Valve set shall be used for Fully closed chiled water supply and return Line. which goes to the Non Common area (Kiosk,Seminar Hall,Shops and Museum). The entire skid shall be Insulated with 25mm thick Nitrile Rubber. The pipe insulation shall be factory laminated with Armachek 'GC' / Equivalent Glass Cloth, with superior workmanship. Make as per enclose annexure or as directed by Engineer in charge etc, complete -Ball Valve Dia-40mm

Supply, Installation, Testing & Commissioning of Factory Made Chilled water Valve set in 16 Gauge Copper Piping complete with 2 Nos. Ball Valves of 25mm size. The Valve set shall be used for Fully closed chiled water supply and return Line. which goes to the Non Common area (Kiosk,Seminar Hall,Shops and Museum). The entire skid shall be Insulated with 25mm thick Nitrile Rubber. The pipe insulation shall be factory laminated with Armachek 'GC' / Equivalent Glass Cloth, with superior workmanship. Make as per enclose annexure or as directed by Engineer in charge etc, complete -Ball Valve Dia-50mm

DX INVERTER HIWALL UNITS

Supply, installation, testing and commissioning of INVERTER TYPE HI WALL Split A.C. with R410/R-32 refrigerant, complete with following component.Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour. 2.0 TR , Make as per enclose annexure or as directed by Engineer in charge etc, complete

VENTILATION UNITS

SITC Inline Exhaust air fan along with Cowl piece, Bird Mesh Screen, Rain Cowl, Louvers as applicable- G.S.S.- and with volume control damper and necessary connection along with accessories. Providing starter panel, Incoming & Outgoing Switchgear / Push button of OEM recommended sizes, inbuilt -protection against O/L, S/C, Indicating lamps, NO-NC contacts. Copper conductor power cabling from starter panel to fan including supply & fixing of plug top if required. Cost is inclusive of both end termination using copper lugs & single compression Brass gland. (Avg. Cable Length 10 Rmt.) (Fan Static Pressure-100 Pascal) ,Make as per enclose annexure or as directed by Engineer in charge etc, complete -1500 cfm

SITC Inline Exhaust air fan along with Cowl piece, Bird Mesh Screen, Rain Cowl, Louvers as applicable- G.S.S.- and with volume control damper and necessary connection along with accessories. Providing starter panel, Incoming & Outgoing Switchgear / Push button of OEM recommended sizes, inbuilt -protection against O/L, S/C, Indicating lamps, NO-NC contacts. Copper conductor power cabling from starter panel to fan including supply & fixing of plug top if required. Cost is inclusive of both end termination using copper lugs & single compression Brass gland. (Avg. Cable Length 10 Rmt.) (Fan Static Pressure-100 Pascal) ,Make as per enclose annexure or as directed by Engineer in charge etc, complete -1300 cfm

SITC Inline Exhaust air fan along with Cowl piece, Bird Mesh Screen, Rain Cowl, Louvers as applicable- G.S.S.- and with volume control damper and necessary connection along with accessories. Providing starter panel, Incoming & Outgoing Switchgear / Push button of OEM recommended sizes, inbuilt -protection against O/L, S/C, Indicating lamps, NO-NC contacts. Copper conductor power cabling from starter panel to fan including supply & fixing of plug top if required. Cost is inclusive of both end termination using copper lugs & single compression Brass gland. (Avg. Cable Length 10 Rmt.) (Fan Static Pressure-100 Pascal) ,Make as per enclose annexure or as directed by Engineer in charge etc, complete -1100 cfm

SITC Inline Exhaust air fan along with Cowl piece, Bird Mesh Screen, Rain Cowl, Louvers as applicable- G.S.S.- and with volume control damper and necessary connection along with accessories. Providing starter panel, Incoming & Outgoing Switchgear / Push button of OEM recommended sizes, inbuilt -protection against O/L, S/C, Indicating lamps, NO-NC contacts. Copper conductor power cabling from starter panel to fan including supply & fixing of plug top if required. Cost is inclusive of both end termination using copper lugs & single compression Brass gland. (Avg. Cable Length 10 Rmt.) (Fan Static Pressure-100 Pascal) ,Make as per enclose annexure or as directed by Engineer in charge etc, complete -450 cfm

SITC Inline Exhaust air fan along with Cowl piece, Bird Mesh Screen, Rain Cowl, Louvers as applicable- G.S.S.- and with volume control damper and necessary connection along with accessories. Providing starter panel, Incoming & Outgoing Switchgear / Push button of OEM recommended sizes, inbuilt -protection against O/L, S/C, Indicating lamps, NO-NC contacts. Copper conductor power cabling from starter panel to fan including supply & fixing of plug top if required. Cost is inclusive of both end termination using copper lugs & single compression Brass gland. (Avg. Cable Length 10 Rmt.) (Fan Static Pressure-100 Pascal) ,Make as per enclose annexure or as directed by Engineer in charge etc, complete -360 cfm

Supply,Installation, testing & commissioning of wall mounted propeller type exhaust fan complete with gravity louver and required accessories .The fan Capacity should be as under; Propeller type exhaust fan-800 cfm, Make as per enclose annexure or as directed by Engineer in charge etc, complete

AIR DISTRIBUTION PRODUCTS

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supplying and installing of collar damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of suitable size.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply,Installation, testing & commissioning of Aluminium Powder Coated Louver for fresh Air. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing and Commissioning of duct type fire damper with frame in GI Construction complete fusible link , fire rated for 90 min. and dead weight. With All Accessory (Actuator, Power Cable Etc).Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing and Commissioning of insulated flexible duct complete with fittings and other accessories. Dia.150mm.Make as per enclose annexure or as directed by Engineer in charge etc, complete Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing and Commissioning of opposed blade volume control Damper in GI construction.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing and Commissioning of sequencial controllers for DX units. Make as per enclose annexure or as directed by Engineer in charge etc, complete

SITC of Disc Valves made out of Sheet Steel powder coated with fully adjustable inner core for regulating volume for Exhaust. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, Installation, Testing & Commissioning of Jet Nozzel suitable for Supply Air comprising of an adjustable centre cone and coupling sleeve made of aluminium sheet duly epoxy painted with approved color. The Jet Diffuser shall be fitted with a galvanised steel installation frame and the sleeve shall incoporate a foam-rubber gasket for Airtight sealing. The centre cone should be adjustable for balancing and with a locking arrangement to maintain the desired flow rate.Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply,Installation, testing & commissioning of supply air square diffuser with damper having a outer size of 600X600 and neck size of 350X350. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply,Installation, testing & commissioning of Return air square diffuser without damper having a outer size of 600X600 and neck size of 450X450. Make as per enclose annexure or as directed by Engineer in charge etc, complete

MS CLASS 'C' PIPING

Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. Make as per enclose annexure or as directed by Engineer in charge etc, complete -300 MM dia.

Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. Make as per enclose annexure or as directed by Engineer in charge etc, complete -200 MM dia.

Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. Make as per enclose annexure or as directed by Engineer in charge etc, complete -150 MM dia.

Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. Make as per enclose annexure or as directed by Engineer in charge etc, complete -125 MM dia.

Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. Make as per enclose annexure or as directed by Engineer in charge etc, complete -100 MM dia.

Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. Make as per enclose annexure or as directed by Engineer in charge etc, complete -80 MM dia.

Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. Make as per enclose annexure or as directed by Engineer in charge etc, complete -65 MM dia.

Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. Make as per enclose annexure or as directed by Engineer in charge etc, complete -50 MM dia.

Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. Make as per enclose annexure or as directed by Engineer in charge etc, complete -40 MM dia.

Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. Make as per enclose annexure or as directed by Engineer in charge etc, complete -32 MM dia.

Supply, installation, testing & commissioning of M.S. Class " C " Chilled Water piping with Nitrile Rubber / XLPE Chemically / Physically Crosslinked Insulation with UV treated covering of 50 mm thick for pipes 100 mm and above & insulation of 25 mm thick Insulation for pipes upto 80mm Dia. The pipe insulation shall be factory laminated with UV treated covering. All piping shall be finally finished with 26 Gauge Aluminium Cladding. Make as per enclose annexure or as directed by Engineer in charge etc, complete - 25 MM dia.

UPVC DRAIN PIPING

Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. Make as per enclose annexure or as directed by Engineer in charge etc, complete 25 mm

Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. Make as per enclose annexure or as directed by Engineer in charge etc, complete 32 mm

Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. Make as per enclose annexure or as directed by Engineer in charge etc, complete 40 mm

Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. Make as per enclose annexure or as directed by Engineer in charge etc, complete 50 mm

REFRIGERANT PIPING

Supply, Installation, Testing & Commissioning of Copper Refrigerant Piping for DX System. Thickness of copper piping as per manufacturers recommendations. copper piping rate should be including cable tray for laying the piping with GI Cover. The Refrigerant piping shall be completed with Nitrile rubber insulation thickness of 19mm. (For DX Hiwall Unit-) Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply, installation, testing, commisssioning of 25 MM DIA Soft Copper Piping (thickness as per manufacturer's recommendation). The cost shall also include the Nitrile rubber insulation of the pipes with 19mm thick Tubes, joints between the chilled water lines and the copper tubes shall be also finished with the nitrile rubber insulation material. To be used for Chilled Water Cassette Units.Make as per enclose annexure or as directed by Engineer in charge etc, complete

FACTORY FABRICATED DUCTING

Supply,Installation, testing & commissioning of GI Ducting Factory Fabricated with TDF Flanges as per SMACNA. The cost shall include Primary as well as secondary supports. Also all the ducting joints shall be completely sealed with Silicon Sealant, and a leak proof system shall be provided. All supports shall be in G.I. Price Should Be included with Zinc chromate coating and enamel paint for ducts. Make as per enclose annexure or as directed by Engineer in charge etc, complete -1500 mm to 2250mm - 20 guage

Supply,Installation, testing & commissioning of GI Ducting Factory Fabricated with TDF Flanges as per SMACNA. The cost shall include Primary as well as secondary supports. Also all the ducting joints shall be completely sealed with Silicon Sealant, and a leak proof system shall be provided. All supports shall be in G.I. Price Should Be included with Zinc chromate coating and enamel paint for ducts. Make as per enclose annexure or as directed by Engineer in charge etc, complete -750 mm to 1500 mm-22 guage

Supply,Installation, testing & commissioning of GI Ducting Factory Fabricated with TDF Flanges as per SMACNA. The cost shall include Primary as well as secondary supports. Also all the ducting joints shall be completely sealed with Silicon Sealant, and a leak proof system shall be provided. All supports shall be in G.I. Price Should Be included with Zinc chromate coating and enamel paint for ducts. Make as per enclose annexure or as directed by Engineer in charge etc, complete -0 mm to 750 mm - 24 guage

INSULATION

Supply, Installation, testing & commissioning of Thermal Insulation as per below 13 MM thickness for duct with XLPE / Nitrile Rubber Class 'O' for Fire with adhesive and all the joints sealed & finished with Alu Tape The thickness used shall be as under. The insulation shall have factory pasted wrinkled Aluminium Foil finish / UV Stabilised Finish. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply,Installation, testing & commissioning of Acoustic insulation of duct with 10mm thick Armasound (Nitrile Rubber) Insulation Material stuck to the duct using Adhesive and then mechanically fixing to the duct using GI Nuts & Bolts and sealant to seal the leakages. Make as per enclose annexure or as directed by Engineer in charge etc, complete

Supply,Installation, testing & commissioning of Acoustic insulation of duct with 32mm thick Armasound (Nitrile Rubber) Insulation Material stuck to the duct using Adhesive and then mechanically fixing to the duct using GI Nuts & Bolts and sealant to seal the leakages. Make as per enclose annexure or as directed by Engineer in charge etc, complete

CABLE TRAY

Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. Perforated Type - 150 mm x 50 mm

Supplying and Installing following size welded ladder type , 50mm depth, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. Perforated Type - 100 mm x 50 mm

ELECTRICAL DETAIL'S

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 150 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 1/2 Core 95 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 16 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface, etc. complete as required

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 1/2 Core 150 sq.mm

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 1/2 Core 95 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 Core 4 sq.mm

VRF AIR COOLED HVAC SYSTEM (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

VRF OUTDOOR UNIT :- Supplying, erecting, testing and commissioning of 24 HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete

HI-WALL:-Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete -HI-WALL- 0.9 TR

HI-WALL:-Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete -HI-WALL- 1.0 TR

HI-WALL:-Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete -HI-WALL- 1.3 TR

HI-WALL:-Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete -HI-WALL- 1.59 TR

HI-WALL:-Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete -HI-WALL- 2.0 TR

Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete -6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete -9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete -12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete -15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete -19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete v-22. mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete -28.58 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. Make as per enclose annexure or as directed by Engineer in charge etc, complete -34.9 mm dia (OD) (Soft drawn) with tube thickness 1.62 mm with 19 mm thick insulation

Communication Cabling For VRF System Providing and fixing of Control Cabling between the indoor units & outdoor units. 3C x 1.5 Sq.mm 2XWY XLPE insulated, PVC inner sheathed, copper conductor, armoured , FRLS PVC outer sheathed cables. Make as per enclose annexure or as directed by Engineer in charge etc, complete

LOW SIDE WORK-Supply and Installation of Power cable from MCB TO ODU. (Make as per enclose annexure or as directed by Engineer in charge etc, complete )

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 16 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 Core 16 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Supply and Installation of Table Top Type Framework for installing VRF Outdoor Units fabricated out of Heavy M. S. Make as per enclose annexure or as directed by Engineer in charge etc, complete

BAGKIYA CONSTRUCTIONS PVT LTD (BID ID -43045)

KEYSTONE INFRA PRIVATE LIMITED (BID ID -42951)

SHANTI CONSTRUCTION (GUJ) PRIVATE LIMITED (BID ID -42901)

Super Construction Company (BID ID -43046)