Loading
Loading…
Loading…
Tender Value
₹1.7 Cr
EMD Value
₹3.3 L
Closing Date
8 Sept 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SRDSTEC
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' which ever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years,ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange,incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Work of Supply, Installation, Testing and Commissioning of PDH/SDH, ADM/PD Mux and its associated equipments. OR ii)AMC of PDH/SDH, ADMS, PD Mux/Faulty Card of Mux Repair work and associated equipment. OR iii) Work of Excavation of Trench and Underground cable laying, Jointing of Copper cable or OFC cable. ORiv) Trenching, Laying, Splicing and Testing of OFC Cables and Part Supply, Testing and Commissioning of SDH equipment. OR v) Trenching, Laying, Jointing and Testing of 6 Quad/PIJF Cables including Erection & testing of Emergency socket and part Supply, testing and commissioning of Repeater Equipments. OR vi) Trenching, Laying, Splicing/Jointing and Testing of OFC/6-Quad cables, Erection & Testing of Emergency socket and part Supply, Testing and Commissioning of SDH/ Repeater Equipment. Note A1: For the following equipment's a. SDH/STM/PDMUX/IPMPLS/VOIP b. Control equipment c. ISDN/IP based exchange d. CCTV/Video surveillance system e. Integrated security system f. Networking equipment g. Train information display board/Coach guidance system /IPIS/GPS CLOCKS h. secured communication system at level crossing gates i. VSAT J. MTRC k. Intrusion Detection System.1. The equipment shall be procured from: a) If there is any RDSO approved source, then the equipment to be procured from the RDSO approved source or its authorized dealer/distributor b) If there is no RDSO approved source but there is TEC approved source, then the equipment to be procured from the TEC approved source or its authorized dealer/distributor c) If there is no RDSO or TEC approved source then the equipment to be procured from the OEM or its authorized dealer/distributor.2. Make, Model, Specification of the offered equipment along with OEM authorization if the tenderer is other than OEM shall be submitted along with the tender.3. MoU with the RDSO approved source or TEC approved source or the OEM, covering supply, installation, testing, commissioning of the system including after sales support required during the warranty period shall be submitted along with the tender.
25 conditions · 17 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Covering letter duly filled by the tenderer to be submitted on their letter head as per Annexure-I of Tender Document.
A copy of Authorization/Power of Attorney issued by the sole proprietor/partnership firm/LLP/ Society/JV/Company in favour of the individual to sign the tender on behalf of the sole proprietor/partnership firm/LLP/Society/JV/company as per clause no. 14 part -l of Tender Document. In case of company power of attorney must be backed by the resolution of Board of Directors and create liability against the company.
Details of Plant and Machinery already available with the firm must be uploaded.
List of engineers/personnel already available/ proposed to be employed for deployment on this work must be uploaded.
Details of Beneficiary for Electronic Transfer of Funds must be uploaded.
An undertaking by sole proprietor firm/all partners of the partnership firm/Power of attorney holder if company (as per Annexure-B/C uploaded with Tender Document ) or LLP or Society/JV that he/they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 (Part-II) of the General Conditions of Contract (as per Annexure-B/C uploaded with Tender Document). (Detail instructions/condition may be seen on Tender Document)
Please submit the copy of the registration certificate of firm, PAN, GSTIN (if applicable)etc.
Tenderes are compulsorily required to upload undertaking (attached as Annexure-A uploaded with STD-2022) regarding Employment /Partnership of Retired Railway Employees attached as Annexure'A'. Otherwise the tenderer will give full information as to the date of retirement of such Engineer or gazetted officer from the said service and as to whether permission for taking such contract, or if the Contractor be a partnership firm or an incorporated company, to become a partner or director as the case may be, has been obtained by the tenderer or the Engineer or officer, as the case may be from the President of India or any officer, duly authorized by him in this behalf, shall be clearly stated in writing at the time of submitting the tender. Note:- Tenders without undertaking or required information shall be summarily REJECTED.
The tenderer shall clearly specify whether the tender is submitted on his own or on behalf of a partnership firm/Company/Joint Venture (JV) /Registered Society/ Registered Trust/HUF etc. The Tenderer (s) who is/ are constituents of firm, company, Association or Society shall enclose self-attested copies of the constitution of their concern, Partnership Deed, copy of PAN Card and Power of Attorney along with their tender. Tender Documents in such cases shall to be signed by such persons as may be legally competent to sign themon behalf of the firm, Company, Association, Trust or Society, as the case may be. Following documents shall be submitted by the tenderer: (a)Sole proprietor Firm: (i) Affidavit of sole proprietorship firm. (ii) All documents in terms of explanatory notes in clause 14.0 PART-I of Tender Document (b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of explanatory notes in clause 14.0 PART-I of Tender Document. (c) Partnership firm, as per Tender Form-2 (Annexure-I) Para 14.10 PART-I of Tender Document: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) All other documents in terms of TENDER FORM -2 of Tender Document (d) Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association)/AOA (Articles of Association) of the company. (ii) A copy of Certificate of Incorporation. (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms of explanatory notes in clause 14 PART-I of Tender Document (e) Limited Liability Society: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation of LLP. (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender/MoU/JV on behalf of the LLP and create liability against the LLP. (iv) All other documents in terms of explanatory notes in clause 14 PART-I of Tender Document (f) Registered Society & Registered Trust: (i) A copy of the Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society. (v) All other documents in terms of explanatory notes in clause 14 PART-I of Tender Document (g) Joint Venture: All documents as specified under Para 14 PART-I of Tender Document
No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suomoto post tender letters of the tenders shall be treated as NULL & Void as per Para 4.6 of STD- 2022
This tender will govern under "Indian Railway Standard General Condition of contract - 2022 or latest. Tenderers are requested to read GCC and tender document very carefully before submitting their Bid.
Performance Guarantee- The successful bidder shall submit PG as per procedure Mentioned in para no.16.(4) of Tender Document in part II, The successful bidder shall submit the performance Guarantee(PG) amounting to 5% of the contract value.
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating his/their tender
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
Undertakings by Partnership Firm- In case the Letter of Acceptance (LOA) is issued to a partnership firm, the undertakings as per Para no. 18.10 of Tender Document in part - I shall be furnished by all the partners through a notarized affidavit, before signing of contract agreement.
As per Railway board letter No. 2018/CE-1/CT/4 dt. 17.10.2018 contractor shall mandatorily update the labour data on Railway Shramik kalyan portal on monthly basis. The detailed guidelines are given in Para no 55-C of Tender Document in PART-II.
S&T works in connection with provision of High-Level Platforms, FOB and Ramps at PRI, Aithal, Raiwala, Laksar, Jwalapur and Motichur Stations under ADEN HW & ADEN/RK
SNT-FOB-2025-26~NR
SNT-FOB-2025-26
Open
Works - General
3 Months
Moradabad, Uttar Pradesh
₹0
₹3.3 L
8 Sept 2026
17 Aug 2026
25 Aug 2026
91 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,65,88,527.09 | ||
| — | 6000.00 | — | — | ||
| Supply of OFC single mode 6 Fibre armoured cable as per attached technical specification in part III of Tender Document. Inspection by consignee. | — | — | — | 1,80,960 | |
| — | 12600.00 | — | — | ||
| Supply of STP ( Shielded twisted paired) CAT-6 Cable as per attached technical specification in part III of Tender Document. Inspection by consignee. | — | — | — | 3,02,652 | |
| — | 6000.00 | — | — | ||
| Supply of HDPE Pipe of 40 mm dia as per RDSO spec. RDSO/SPN/TC/45/ 2013, Rev. 2.0 Amendment-1 & amendment- 2 or latest with end cap provided with each drum as per attached technical specification in part III of Tender Document. Inspection by consignee. | — | — | — | 3,60,180 | |
| — | 6000.00 | — | — | ||
| Laying of HDPE duct in the trenches and in the protective works already provided including in HDD portion and supply pulling of Nylon rope through it at different places as per direction of engineer in charge or site engineer. | — | — | — | 39,600 | |
| — | 6000.00 | — | — | ||
| Drawing / Blowing of Optical Fiber Cable in PLB HDPE Duct. as per direction of engineer in charge or site engineer | — | — | — | 69,660 | |
| — | 54.00 | — | — | ||
| Supply and installation of FMS (24 F) rack mountable single mode with Suitable type with splicing and termination of OFC cables with all accessories (Pig tail and other materials required for work to be supplied by contractor ) as per attached technical specification in part III of Tender Document. For Supply portion : Consignee & For Execution portion : Site Engineer | — | — | — | 3,28,286.52 | |
| — | 24.00 | — | — | ||
| Supply and installation of optical fiber cable joint enclosure as per TEC Spec.no.GR/OJC-02/01/March 99 with latest amendment and splicing of optical fiber cables (24 Fibre and testing). This includes provision of joint pit (RCC/Prefabricated) as detailed in the technical specifications and as advised by Engineer at site. For Supply portion : Consignee & For Execution portion : Site Engineer | — | — | — | 4,31,591.52 | |
| — | 36.00 | — | — | ||
| Supply, installation of 19"12 U rack with transparent door with accessories like fans and tray etc. as per attached technical specification in part III of Tender Document. For Supply portion : Consignee & For Execution portion : Site Engineer | — | — | — | 2,44,265.4 | |
| — | 4500.00 | — | — | ||
| Supply of 3 Core x 2.5 Sq mm multi strand copper conductor, PVC insulated, armoured power cable as per RDSO specification No. RDSO /SPN/TC/65/2021 ver 6.0 or latest). as per attached technical specification in part III of Tender Document. Inspection by consignee. | — | — | — | 3,40,560 | |
| — | 30.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of Full HD Fixed Bullet type IP Color Camera along with128 GB or Higher SD Card, housing and mount and all accessories required for installation purposes per RDSO Spec No RDSO/SPN/TC /65/2021 Version 6.0 with amendment no. 1, 2 & 3. For Supply portion : RDSO & For Execution portion : Site Engineer. | — | — | — | 4,36,821.9 | |
| — | 3000.00 | — | — | ||
| Floor/wall cutting and refilling the same including supply and laying of 25 mm PVC pipe ISI medium. as per attached technical specification in part III of Tender Document. Inspection by Site Engineer. | — | — | — | 3,02,610 | |
| — | 1800.00 | — | — | ||
| Excavation of cable trench at platform/concreted surface of 120 mm wide &300 mm deep with marble cutting machine as per approved cable plan at place where cess formation width does not allow, standard width/depth of trench to be dug for safety reason .Restoring surface to normal condition as prior to trenching required material will be supplied by the contractor according to excavated surface as per attached technical specification in part III of Tender Document. Inspection by Site Engineer. | — | — | — | 3,09,816 | |
| — | 1500.00 | — | — | ||
| Splicing of fiber of 24/6F OFC in the joint enclouser / fiber termination box/FMS as per site requirement as per attached technical specification in part III of Tender Document. Inspection by Site Engineer. | — | — | — | 2,48,190 | |
| — | 72.00 | — | — | ||
| Supply and installation of FMS (12 F) rack mountable single mode with splicing and termination of OFC cables with all accessories (Pig tail and other materials required for work to be supplied by contractor as per attached technical specification in part III of Tender Document. For Supply portion : Consignee & For Execution portion : Site Engineer | — | — | — | 2,60,822.16 | |
| — | 3600.00 | — | — | ||
| Supply of PVC Conduit Pipe of 25 mm dia ISI marked heavy (HMS)series as per IS: 9537part-III - 1983 standards or latest.as per attached technical specification in part III of Tender Document. Inspection by consignee. | — | — | — | 82,152 | |
| — | 3600.00 | — | — | ||
| Laying & Fixing of conduit 25mm (conduit Pipe must be fixed with clamp at the interval of 300mm)/HDPE/GI/RCC Pipe as per attached technical specification in part III of Tender Document. Inspection by Site Engineer. | — | — | — | 71,028 | |
| — | 18000.00 | — | — | ||
| Laying of OFC Cable/STP Cable/Power Cable in conduit pipe/casing and capping and PVC channel as per attached technical specification in part III of Tender Document. Inspection by Site Engineer. | — | — | — | 1,79,640 | |
| — | 600.00 | — | — | ||
| Supply of RJ-45 connectors with cap as per attached technical specification in part III of Tender Document. Inspection by consignee. | — | — | — | 3,456 | |
| — | 573.00 | — | — | ||
| Supply of OFC jumper (patch chord)(10 mtr long) with FC/PC & SC or suitable connector at both end as per site requirement (as per RDSO/SPN/TC/69/2007 rev.0 with latest amendments.) as per attached technical specification in part III of Tender Document. Inspection by consignee. | — | — | — | 3,22,306.77 | |
| — | 1200.00 | — | — | ||
| Boring & Trenchless cabling along with supply & insertion of self lubricated HDPE pipe as per IS 4984:2016 (PN 6) of 110mm outer dia with 6mm wall thickness in the bore for laying of Signalling / Telecom /Power cable under track/road/culvert etc. cable laying covered separately as per attached technical specification in part III of Tender Document. For Supply portion : RITES & For Execution portion : Site Engineer. | — | — | — | 17,36,592 | |
| — | 600.00 | — | — | ||
| Trenchless boring (by using HDD or manual pushing method) for laying HDPE ducts(40/33 mm dia). as per attached technical specification in part III of Tender Document. Inspection by Site Engineer. | — | — | — | 4,10,832 | |
| — | Breakup | for details. | — | ||
| Preparation & fixing of bakelite hylum sheet 910x800x6mm and teak wooden shelf 900x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location boxes secured by nuts and bolts. This includes fixing of fuses, ARA terminal shelf type Q series relays and other type relays on square bars fixing and jamming of cables with 2 inch thick salwood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable in the hole drilled separately for each cable through the salwood plank and all cable entry points on location boxes, location huts, JBs relay room/battery room to be closed with suitable masonry works covered with sand and plastering. Wiring description for terminal drawing of circuits, inside app. Case. Painting from out side as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including hard wood shelf, hylum board, salwood plank, angle iron square bar, wire and wiring material as per the IRS specn., non deteriorating type fuses with bases, catenary wires , nuts and bolts and other items shall be supplied by the contractor. Relays, ARA terminals only shall be supplied by the Railways. | — | — | — | 1,54,029.72 | |
| — | 6.00 | — | — | ||
| Supply of single app. case steel RE with 'E' type lock and key ward no.42 and handle as per drg. No. RE/S&T/ALD/SK/219/82 with (Alt A) and 221/82 with Alt.B. as per attached technical specification in part III of Tender Document. Inspection by consignee. | — | — | — | 1,25,695.44 | |
| — | 12.00 | — | — | ||
| Casting, concreting and curing of foundation and erection of App. Cases (Single) as per drg. No.(NR/S&T/CON/2. 7/97). All materials such as cement, sand, aggregate and anchor bolts shall be supplied by the contractor. App. Case single will be supplied by railway. Contractor is required to execute all type of repair works of foundations if required during inserting the cable for termination. as per attached technical specification in part III of Tender Document. Inspection by Site Engineer. | — | — | — | 55,996.32 | |
| — | 6.00 | — | — | ||
| Supply of apparatus case steel RE half with E type lock and key ward no.42 and handle as perdrg.no. RE/S&T/ALD/SK/220/82 with Alt.B and 221/82 with Alt. B. as per attached technical specification in part III of Tender Document. Inspection by consignee. | — | — | — | 1,00,996.5 | |
| — | 42.00 | — | — | ||
| Casting, concreting and curing of foundation and erection of half App. Cases of size (670mm x 760mm) and 650mm deep as per Drg. No. NR/S&T/CON/2.8/97. A layer of 3 mm of bitumen compound has to be provided between foundation and location box to prevent ingress of water in the base of location box. All materials such as cement, coarse sand, aggregate and anchor bolts shall be supplied by the contractor. App. Case half will be supplied by Railway. Contractor is required to execute all type of repair works of foundations if required during inserting the cable for termination. as per attached technical specification in part III of Tender Document. Inspection by Site Engineer. | — | — | — | 2,09,593.02 | |
| — | Breakup | for details. | — | ||
| Preparation and fixing of bakelite hylum sheet 450x800x6mm and teak wooden shelf 450x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location box secured by nuts and bolts. This includes fixing of fuse ARA terminal, shelf type Q series relays and other type of relays on square bars, fixing and jamming of cable with 2 inch thick sal wood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable in the hole drilled separately for each cable through the salwood plank and all cable entry points on location boxes, location huts, JBs relay room/battery room to be closed with suitable masonry works covered with sand and plastering. Wiring description for terminal drawing of circuits, inside app. Case. Painting from out side as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including hard wood shelf, hylum board, salwood plank, angle iron square bar, wire and wiring material as per the IRS specn., non deteriorating type fuses with bases, catenary wires , nuts and bolts and other items shall be supplied by the contractor. Relays, ARA terminals only shall be supplied by the Railways | — | — | — | 1,73,630.52 | |
| — | 30.00 | — | — | ||
| Concreting unscheduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. It also includes the excavation of earth as required at site and as per instruction of site in charge. The volume in cubic meters shall include the volume occupied by any CI foundation, trestle, MS angle or flat or GI pipe required to be embedded in the casting. Cement coarse sand and aggregate 25mm are to be supplied by the Contractor as per attached technical specification in part III of Tender Document. Inspection by Site Engineer. | — | — | — | 1,11,635.1 | |
| — | 6.00 | — | — | ||
| Supply, Installation, Testing and commissioning of 2KVA on line UPS as per attached technical specification in part III of Tender Document. For Supply portion : Consignee & For Execution portion : Site Engineer | — | — | — | 3,17,595.12 | |
| — | 54.00 | — | — | ||
| Supply of Dual Band WiFi Router supports upto 1Gbps speed . as per attached technical specification in part III of Tender Document. Inspection by consignee. | — | — | — | 85,231.98 | |
| — | 24.00 | — | — | ||
| Supply, installation, testing and commissioning of Media Converter- fiber to Ethernet 100 base T Signal mode fiber with all required accessories including AC 230 V to DC Power adapter, as per Clause No. 16 of RDSO Spec. RDSO /SPN/TC/103/2013 (Rev.3.0) or latest. as per attached technical specification in part III of Tender Document. For Supply portion : Consignee & For Execution portion : Site Engineer | — | — | — | 1,50,728.16 | |
| — | 1200.00 | — | — | ||
| Supply of DLP trunk 80 X 50mm with required all changeable internal /external angle, changeable flat angle, flat junction. Clips, joint for cover, end cap etc. as per attached technical specification in part III of Tender Document. Inspection by RITES. | — | — | — | 5,73,576 | |
| — | 1200.00 | — | — | ||
| Fixing & wiring (Laying) o f DLP trunk 80X50mm with required all changeable internal/external angle, changeable flat angle, flat junction. Clips, joint for cover, end cap etc. make Legrand or superior. Cable will be supplied by Railway and all other fixing material will be supplied by contractor. as per attached technical specification in part III of Tender Document. Inspection by Site Engineer. | — | — | — | 1,43,400 | |
| — | 501.00 | — | — | ||
| Supply & Installation of Patch cord RJ- 45 (3Mtr.) as per attached technical specification in part III of Tender Document. For Supply portion : Consignee & For Execution portion : Site Engineer. | — | — | — | 1,08,436.44 | |
| — | 15000.00 | — | — | ||
| Laying of signalling / Telecom / Power cables of differents sizes as per drg. No. (NR/S&T/CON/1.1/97) and as per cable route plan approved by railway and meggering of cable before and after its laying of all type of outdoor cables. Meggering to be done for each drum seprately . Meggering sheets to be supplied and filled up by contractor and submitted to railway. as per attached technical specification in part III of Tender Document. Inspection by Site Engineer. | — | — | — | 1,14,000 | |
| — | 8400.00 | — | — | ||
| Excavating & refilling of trench in normal soil to the level of ground with rammed earth as per Drg. NO.(NR/S&T/Con/1-1/97) so as not form a drain,0.3 Mts wide & 1 Mts deep on both side of the station along the track. It shall confirm to the safe distance as per signalling & cable route plan in all type of soil, it also includes clearance of roots of trees & bushes. Lesser depth due to site condition shall be paid proportionately, after being decided in writing by engineer not below the rank of JAG. as per attached technical specification in part III of Tender Document. Inspection by Site Engineer. | — | — | — | 6,83,508 | |
| — | Breakup | for details. | — | ||
| Supply of disconnect terminal Wago or similar as per spec. no.RDSO/SPN/189/2004 Ver 3.0 or latest as below: | — | — | — | 2,92,158.3 | |
| — | 24.00 | — | — | ||
| Supply, installation, testing and commissioning of 24 port b10/100/1000 Mbps smart- managed POE switch with 4 SFP ports as per RDSO/SPN/TC /65/2021 Version 6.0 with amendment no. 1, 2 & 3as per attached technical specification in part III of Tender Document. For Supply portion : RDSO & For Execution portion : Site Engineer. | — | — | — | 4,70,885.52 | |
| — | 54.00 | — | — | ||
| Supply of Smart Managed PoE+ 8 Port switch with 2SFP Uplink Ports as per RDSO/SPN/TC /65/2021 Version 6.0 with amendment no. 1, 2 & 3specification as per attached technical specification in part III of Tender Document. For Supply portion: RDSO. | — | — | — | 5,12,584.74 | |
| — | 3000.00 | — | — | ||
| Supply and wiring of 2 core screened/shielded multi strand PVC insulated wire (24/0.2 mm dia) for speaker load line. as per attached technical specification in part III of Tender Document. For Supply portion : Consignee & For Execution portion : Site Engineer. | — | — | — | 1,08,510 | |
| — | 24.00 | — | — | ||
| Supply of 9U Rack Enclosures for networking/ sever rack as per attached technical specification in part III of Tender Document. Inspection by consignee. | — | — | — | 1,57,384.56 | |
| — | 9.00 | — | — | ||
| SITC of New Generation Firewall as per technical specification attached, with minimum 03 years OEM warranty. as per attached technical specification in part III of Tender Document. For Supply portion : RITES & For Execution portion : Site Engineer. | — | — | — | 19,32,668.28 | |
| — | 354.00 | — | — | ||
| Supply, erection & commissioning of Cablofil wire mesh cable tray size 300mm width and 54mm depth electro galvanized type with complete accessories as per attached technical specification in part III of Tender Document. For Supply portion : RITES & For Execution portion : Site Engineer. | — | — | — | 14,15,582.28 | |
| — | 6.00 | — | — | ||
| Supply of Optical Power Meter having resolution of 0.1 db & measuring range +3 dbm to -60 dbm as per TEC specification No.GR/OPM-01/03 Feb 05 or latest as per attached technical specification in part III of Tender Document. Inspection by consignee. | — | — | — | 4,69,766.76 | |
| — | 9.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of 24 Port manageable Layer 3 Switch with 4 Nos of 10G SFP port and 24 Nos of GE port with all accessories as per Spec. No: RDSO/SPN/TC /65/2021 Version 6.0 with amendment no. 1, 2 & 3as per attached technical specification in part III of Tender Document. For Supply portion : RDSO & For Execution portion : Site Engineer | — | — | — | 14,58,912.06 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
PhaseI-VMTCTE.pdf
ATTACHMENT
PhaseVIMTCTEMTCTE.pdf
ATTACHMENT
PPP-PMIorder21102024.pdf
ATTACHMENT
PublicProcurementPreferencetoMakeinIndiaRevisedOrderEnglishdated19.07.2024.pdf
ATTACHMENT
MTCTENotification.pdf
ATTACHMENT
TDFOB_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .