WBPWD/EE/PMED/NIQ-43/2024-25

Amount

SITC of 2 TR split type room Air Conditioner (cooling only) having the following specification & features:- A) Cooling capacity minimum (BTU /HR): 24000 B) Star Rating -2 star; C) Rated Voltage-230 V+/-5%, Frequency -50 Hz; D)compressor type- Rotary; E) Mini. Room Discharge Air Flow Rate- 1050CMH; F) Refrigerant: R- 410A; rdless Remote Arrangement with all modernized provision of temperature setting , Fan speed option ( Low /Medium /High ) Auto Swing. (Make :- MITSUBISHI Electric/O General) With 15A plug top, 2mt long input cord , & all other installation kit except indoor to out door unit connecting pipes & cables, out door unit will be fixed on wall with heavy type wall base.Incl supply of wall base./on floor with necessary iron chair (300mm hight). fixed on roof floor.[ Male ward-1535 sq.ft= 11 nos( 2tr split) and Female ward-1200 sq.ft=9 nos( 2tr split)][ Pathology lab=06 nos ( 2tr split)

Installation,Commissioning and testing of 2.0/1.5 ton split type AC machine both indoor/outdoor including fixing of 40 x 40 x 5 mm MS angle iron frame and mending good the damages.(incl. laboue cess)

Supplying & fixing of extra refrigerant pipe with insulation foam insulation. (as requisite dia) (Each mtr. refrigerent pipe will include cost of 1 mtr. liquid pipe line and 1 mtr. gas pipe line of required dia.) (N.S.)

Supplying & fixing of 3 core 2.5 sq. mm PVC insulated PVC sheathed unarmoured Copper cable. (Make : Finolex/Havells/Polycab/RR Kabel)

Supplying & fixing of 18 mm dia PVC drain pipe. (Make approved by EIC)

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plugn socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Distribution wiring in 1 .1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

i) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

i) 2.5 sqmm

ii) 4 sqmm

S & f 415 V ,16-32A per way,6-way Vertical TPN DB-MCB DB for laxic MCB having IP-43-IK09 with metal door four pole MCCB as incomer and TP MCB as outgoing in suitable enclosure with metal door, comprising the following a) 160A, 35KA, FP MCCB -1 no b) 63A, C' curve, 10KA, TP MCB - 6nos. d) Cable entry box-2 nos. Make- Siemens (8GB31572RC)/ Schneider/ Legrand.

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (4 way) [Make: LEGRAND, ABB, SIEMENS, CRABTREE, SCHNIDER]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. [Make: Legrand, Schneider, ABB, Crabtree] FP(80A) For HTPN Incoming

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [Make: Legrand, Schneider, ABB, Crabtree] SP(6-32A) For Outgoing

S & F of 240 V Timer DB equivalent to (10 + 2) way SPN double door make DB with SS enclosure phosphitised powder coated incl din rail with IP - 43 protection comprises with 1 nos 32 A DP MCB (C Curve,10 KA) 1 nos 24 hours programmable Time Switch with minimum switching time of 15 minutes ,1 nos 25 A 2 pole power contactor complete with outer cover plate & internal wiring by 4 sqmm copper wire 1 nos. Auto Manual bypass toggle switch ,earthing attachment incl 1 nos LED indication light for running condition & locking arrangement. (Make : LT / ABB/ Schneider/ siemens)

Supply & Delivery of following size 1.1 kv.gr.XLPE insulated 1100V Grade as per IS 7098 (part 1) 1988 armoured sheathed Aluminium conductor cable with 2x10 SWG GI wire. [Make - Finolex/Polycab /Havells/Gloster/ KEI]

b) 4 core 70 sqmm

Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/ surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. As necy., mending good damages and painting

c) 4 core 70 sqmm

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl.removing the rubbish.

c) 4 core 70 sqmm

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cableas & Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

a) 4 core 70 sqmm

Supply and delivery of 1.1 KV grade, 4 Core 16 sq mm. XLPE Insulated & Sheathed Armoured Aluminium Conductor cables.[Make: UNIVERSAL, HAVELES, POLYCAB, RR KABLE]

Laying of cable upto 4 core 16 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture- proof entry of XLPE/PVC armoured cables as below For 4 Core upto 16 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials For 4 Core upto 16 sqmm

Supplying & fixing sheet metal 415 V, 600 A (1 6 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD SpecificationBook – May 1 991 ) Dimension of Cu. Bars [85mm long]- 4 x (2x 40x5) mm, Dimension of Sheet Metal Box-500x1 50mm

Supplying and fixing 41 5V, 200A TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make- L&T, Havells, Siemens)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (1 25mmx1 25mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1 .5sqmm.) flexible copper wire of 1 .1 0 mt. length.

Supplying and Drawing 1 .1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaidpolythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x 22/0.3 (1 .5 sqmm)

Wiring in 1 .1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. 2 x 22/0.3 (1 .5 sqmm) + 1 x 22/0.3 (1 .5 sqmm)

RASH ELECTRICAL WORKS

CHANDIMATA TRADERS

MAHESWAR ELECTRICAL INDUSTRIES