PROVN OF COMPOUND WALL UNDER AGE B R II OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Excavation in trenches not exceeding 1.50 m wide and 1.5 mtr depth for foundation etc, getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation conconrete mass filling complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layer not exc 25cm thick complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50metre above the starting point complete all as specified and directed

M&L RCC (Design Mix) M-25 using 20 mm graded crushed stone aggregate for foundations, including rafts, footings, foundation Beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for RCC (Design Mix) M-25 using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts complete all as specified and directed.

M&L RCC (Design Mix) M-25 using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Use & Waste of formwork in rough finished surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams in rough finished surface of concrete complete all as specified and directed.

M&L for Use & Waste of formwork in rough finished surface to sides of pillars, posts, struts, piers, columns and stanchions in rough finish of concrete surface etc complete all as specified and directed.

M&L for Use & Waste of formwork in rough finished surface to roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, in rough finish of concrete surfaces etc complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 11.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L for brick work with fly ash Bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed (Notes : WPC shall be measured and paid seperately)

Supply only water proofing compound (Liquid) complete all as specified and as directed.

S&F MS steel angle as in Post and struts in fencing including cutting tops to shape as directed drilling holes, notching for wires etc, flat iron fillet (for securing wire mesh) including all necessary drilling, bolting & riveting etc complete, conforming to Fe-290-0 Gde E-165 complete all as specified and directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide zink primer etc complete all as specified and directed.

M&L for preparing newely plastered surface of wall and applying finishing walls with acrylic smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete all as specified and directed.

M&L for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (each line wire to be measured)

M&L for providing PCC 1:2:4 type B1 as in Bed blocks, hold fast etc complete all as specified and as directed.

SHRI S K BHATTACHARJEE

Shree Ram Construction

M/S Vaishno Constructions

M/S BENGAL ENGINEERING ENTERPRISES