Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.8 LAccepted-AOC | L1 | Accepted-AOC Tender awarded to M/s Web Company being L-1 | |
| 2 | L2₹17.4 L+₹2.6 L (17.4%)Rejected-Finance | L2 | Rejected-Finance not lowest tender | |
| 3 | L3₹19.2 L+₹4.4 L (29.6%)Rejected-Finance | L3 | Rejected-Finance not lowest tender | |
| 4 | L4₹21.8 L+₹7.0 L (47.6%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L4 | Rejected-Finance not lowest tender |
Tender Value
₹24.5 L
EMD Value
₹49,000
Closing Date
10 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE 860 EWS
PROVN OF 01 LIVING ACCN FOR FS SECTION AT CERTAIN UNIT AND WALL PANELLING FOR DINING HALL ALONGWITH FLOOR TILE FOR COOK HOUSE AT FRI HQ U FORCE AT KIARI UNDER GE 860 EWS
2022_MES_546513_1
8167/2022-23/E8
Open Tender
Civil Works
Item Rate
270 days
Kiari
Class E category a i
8 documents required · 8 mandatory
₹500
GE 860 EWS
₹49,000
Yes
11 Nov 2022
20 Aug 2022
12 Sept 2022
20 Aug 2022
10 Sept 2022
27 Aug 2022
Amount
Surface dressing n exc 15 cm deep in soft /loose soil all as specified
Excavating in post holes (or similar holes)each n. exc 0.5 cum, getting out, returning, fillingin and ramming erth pr broken rubble mixed with eart around, in layers not exc 25 cm all as specified and directed by Engr in charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard /dense soil
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
M&L for Cement concrete PCC Type D-2 1:4:8(40 mm graded crushed stone aggregate) in foundations,filling and mass concrete complete all as specified and directed.
M &L Cement Concrete Type-B1 (1:2:4)) in foundations,including rafts, footings complete all as specified and directed.
M & L for Reinforced cement concrete (nominal mix) 1:2:4( 20 mm greded aggregate) in chajjas complete all as specified and directed.
S& F Formwork to Rough finished surfaces concrete chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.
M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed.
S & F steel work in roof trusses (framed ) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,channel or flat sections) including distance pieces cleats etc complete all as specified and directed.
M & L for Pre-cast cement concrete block masonry type C-1 1:3:6 (20 mm graded crushed stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for PCC 100 mm thick 1:2:4 type B2 (40 mm graded aggregate) as in sub base complete all as specified and directed.
M&L for coloured jointless Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed by Engr -in-Charge
M&L for Glazed ceramic tiles450x300x7mm thick coloured/shaded as in vertical surfaces such as skirting dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick rendering (1:4) complete all as specified and directed by Engr -in-Charge
S & F for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
S & F for Factory made shutter 35 mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed by Engr-in-charge.
S & F 30mm thick Second class hard wood Glazed and skeleton windows,ventilators open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.sizes of members of shutters as specified in SSR Part I, Section 8 Clause 8.24(a)
S & F 3.00 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, all as specified.
S & F Figured glass, pin head type 3 mm thick, confirming to SI-5437 (1969) and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified.
M & L PCC type B-1 1:2:4 (20 mm graded aggregate) for fixing hold fast all as specified
S & F MS flat iron of size 25x3 mm as in hold fast conforimg to Fe 410-0 or Fe-310-0 all as specified
15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even smooth without using extra cement, all as specified.
Rendering 15 mm thick on fair faces of brick wall or cement concrete surface in cement mortsr 1 :4 finished even smooth without using extra cement, all as specified.
Plinth protection 75 mm thick in PCC type C1 1:3:6 (using 20 mm graded aggregate crushed stone aggregate) laid in alternate bays (not exc 2 Sqm each) finishing even smooth at top without using extra cement and providing joints throughout the thickness of plinth protectio, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as specified and directed at site.
S & F of 100 mm size extruded alluminium alloy with galvanised mild steel hinge pin type C-21 all as specified.
S & F Aluminium anodised, barrel tower bolts of extruded section with 150 mm long bolt and fixed all as specified
S & F Aluminium handles, cast type, anodised 125 mm size complete all as specified
S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm long all as specified.
S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 150 mm long all as specified.
S&F for 0.50 mm thick Pre- painted galvatume aluminum zinc coating GI based corrugated in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as directed by Engr-in-Charge.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd and specified
S&F Viterous China wash hand basin with pedestal coloured, flat back of 550 x 400 mm including brackets, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of 750mm long complete all as specified and directed
S&F Viterous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connectoin to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor complete all as specified and directed.
S & F of PVC (Plastic polymer Cistern) low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc and S & F of 32 mm dia PVC flush pipe of suitable length and making all connection complete all as specified and directed.
S&F Rotational moulded water tank 1000 litre polye-thylene water storage tanks triple layered (cylindrical vertical with threaded closed top) hoisted and fixed in position with all necessary fittings all as spd and directed by engr in charge.
S&F of 16mm bore 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc
All as per item No 40 here-in-before but 20 mm dia pipe
S&F 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified
S&F 20 mm bore ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified
S&F 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.
S&F of 15mm bib taps, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed
S&F brass chromium plated tubular towel rail 20mm dia 600 mm long fixed complete all as specified and as directed.
S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.
M&L for PVC (SWR) 110 mm gully trap setting joining with solvent cement complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm fixed complete all as specified and directed.
S&F in repair PTMT waste grating doom with waste hole 100mm dia
S&F in repair angle/stope valves 15mm bore (for iron pipe) fancy type PTMT any colour screwed down high pressure with butterfly handle screwed both ends including fixed in repair all as specified.
M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes etc. with riveted, bolted or welded attachment confirming to Fe 410-W (Gde E-250), complete all as directed by Engieer-in-charge.
Mild steel bolts neck exc 10 mm dia and n exc 15 mm dia, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each scre-wed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long
M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and treating with two coats of synthetic enamel paints over a coat of red oxide primer.
Preparing plastered new surfaces of wall and applying two coats of cement base paint with one coat of primer all as specified.
Preparing of new surface of wall of any description and applying two coats of distemper oil emulion, with one coat of primer all as specified.
Prepration of new wooden or wood based Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified.
M&L for plywood Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; 6 mm thick ( 5 Nos of ply) fixed with nails to timber frame work complete as in walls complete all as spd & directed.
M&L for plywood Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; 4 mm thick ( 3 Nos of ply) fixed with nails to timber frame work complete as in ceiling complete all as spd & directed.
M&L second class hard wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 6 Sq cm n.exc 13 Sq cm secured with nails or brads complete all as spd & directed.
Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified.
Excavating over areas, exc 1.5 m and n.exc. 3.00m deep and getting out in hard/dense soil complete all as specified.
M& L for Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, build in cement mortar 1:6 complete all as specified.
M& L for Walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified.
M&L for reinforced cement concrete Type B1 1:2:4 using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc rough finished surfaces of concrete complete all as specified and as directed.
M&L for formwork Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surfaces of concrete complete all as specified and as directed.
M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded agg) as in cover slab for manholes set in cement mortar 1:4 including necessary form work complete all as specified and directed by Engineer in Charge.
Plain cement concrete 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested for 150 mm bore SGSW pipe complete all as specified.
S & F 150mm dia, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
Supply only water proofing compound
M&L for broken boulders stone n. exc. 63mm of gauge in loose filling complete all as specified.
Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc complete all as specified
M&L point wiring complete for one light / bell / fan point controlled by one no, 1-way, 5 Amps switch. with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :- (Note : The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)
All as per Srl item no. 75 here-in-before but one 3 Pin socket outlet, 5 Amp on independent board
All as per Srl item no. 75 here-in-before but one 3 Pin socket outlet, 5 Amp on same board
All as per serial item No 75 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm FRLS PVC copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including FRLS PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly.
M&L point wiring complete for one light / bell / fan point controlled by one no, 1-way, 5 Amps switch. with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl 50mm deep box made out of 2nd class hard wood of required size and shape , covered with & incl 3 mm thick bakelite, laminated hylem sheet suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :- (Note : The cost of box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)
All as per Srl item no. 79 here-in-before but one 3 Pin socket outlet, 5 Amp on independent board
All as per Srl item no. 79 here-in-before but one 3 Pin socket outlet, 5 Amp on same board
All as per serial item No 79 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm FRLS PVC copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including FRLS PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly.
S&F switch piano flush button single pole one way 5 Amps complete all as specified and directed by Engineer-in-Charge
S&F in replacement of socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed by Engineer-in-Charge
Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5 Amp , flush type complete all as specified and as directed by Engr-in-charge.
Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5 Amp and 15 Amp, flush type complete all as specified and as directed by Engr-in-charge.
Supply and fixing angular lamp holder, PVC/Polycaronate type with back plate suitable for 12 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge.
Supply and fixing LED 9 Watt all as specified and directed by Engr -in-Charge
Supply and fixing LED 12 Watt all as specified and directed by Engr -in-Charge
S&F of Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.
Supply and fixing LED lights with complete fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 08 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.
S&F MCB single pole and neutral 32 to 40 Amps, 240 Volt, C curve 10 KA complete all as specified and directed by Engineer-in-Charge
S&F MCB single pole 5 to 30 Amps, 240 Volt, C curve 10 KA complete all as specified and directed by Engineer-in-Charge
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200,with copper winding of sweep 250mm complete all as specified.
Supply and fixing new energy saving LED Bulk head fitting 12 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Eng-In-Charge
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2009 Part-I and connecting to CBDB’s as specified or indicated including testing on completion .
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cases of suitable size complete.
Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor (Stranded) 1100V grade cross-sectional area 10 Sqmm 2 core laid in trenches or passing through pipe or fixed on pole etc complete all as specified and directed by Engr-in-Charge
M&L for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40 mm thick complete all as specified and directed by Engineer-in-Charge
M&L for sand cushioning to under ground electric cable complete all as specified and directed by Engineer-in-Charge
SHANTI ENTERPRISES
M/s Koul & Sons
M/s Aman Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .