SPECIAL REPAIRS TO GRN BN MAG BUILDING NO. T 3, T 9, T 11, T 12 T 18 UNDER GE WEST COLABA, MUMBAI

Amount

Fixing only in repairs to replace old and or decayed boarding in patches including cutting out old, piecing, heading joints etc, second class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps in any situation with nails including scaffolding at any height complete all as specified and as directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof coverings including scaffolding at any height complete all as specified and as directed by Engr-in-Charge.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings/cladding to wall, fixed with self tapping screws as specified and as directd by the Engineer - in - Charge and as directed by manufacturer on wooden/steel members including scafoldings of any height complete all as specified and directed. Make- (i) TATA (ii) JSW (iii) ESSAR (iv) HINDALCO (v) INDALCO (vi) ASSOCIATED PROFILES AND ALUMINIUM LT

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheets, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings/cladding to wall, fixed with self tapping screws as specified and as directd by the Engineer - in - Charge and as directed by manufacturer on wooden/steel members including scafoldings of any height complete all as specified and as directed by Engr-in-Charge. Make- (i) TATA (ii) JSW (iii) ESSAR (iv) HINDALCO (v) INDALCO (vi) ASSOCIATED PROFILES AND ALUMINIUM LT

S & F in repair old and decayed timber (including piecing, scaryfying, etc., of old and new timbers if required) and removing defective portions to store or taken on credit and M & L for structural timbers of second hard wood, clean sawn in scantlings, timber framed and fixed in any position and description including scaffoldings of any height complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster on brick or stone/concrete surfaces, etc. on internal/external surface of wall/ceiling including raking out joints, hacking for key, scrubbing down with water to receive plaster and removing debris out side MD land complete all as specified and as directed by Engr-in-Charge.

M & L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall and finished even and fair without using extra cement complete all as specified and as directed by Engr-in-Charge.

M & L for 15mm thick plaster in CM (1:4) in two coats (10mm+5mm) on fair faces of the brick or concrete surfaces of wall using water proofing compound in both coats as per manufacturer instructions and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. Note :- WPC will be measured & paid seperately for supply only

Supply only liquid water proofing compound. Make - Plastocrete of Sika/Pidiproof LW of Pidilite.

M & L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces of ceiling/chajja and finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over a 1mm thick (average) of wall care putty complete all as specified and directed by Engineer in Charge. Make: SHALIMAR / BERGER / NEROLAC / ICI LTD/ASIAN (Tractor Brand)

M & L for preparation of plastered surfaces of wall including complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant primer over a 1mm thick (average) of wall care putty complete all as specified and directed by Engineer in Charge. Make: SHALIMAR / BERGER / NEROLAC / ICI LTD/ASIAN (Tractor Brand)

M & L for preparation of plastered surfaces of wall/ceiling and applying two coats of Acrylic weather proof exterior paint over a coat of acrylic primer complete including scaffolding at any height complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make- (a) Asian Paint - Apex Ultima Protek. (b) Berger Paint - Weather coat smooth. (c) Nitco Paint - Outshine premium 100% acrylic exterior (d) ICI Dulux - Weather shield exterior.

M & L for preparation of plastered surfaces of wall/ceiling including complete removal of existing treatment and applying two coats of Acrylic weather proof exterior paint over a coat of acrylic primer complete including scaffolding at any height complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make- (a) Asian Paint - Apex Ultima Protek. (b) Berger Paint - Weather coat smooth. (c) Nitco Paint - Outshine premium 100% acrylic exterior (d) ICI Dulux - Weather shield exterior.

S & F in repair 1.60mm thick mild steel plain sheets as in covering to door shutters or similar work complete all as specified and directed by Engineer in Charge.

S & F 3.0mm thick sheet glass, plain, ordinary quality,in square or rectangles, not exc. 0.5 Sqm in each pane, glazing with putty complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Dismantling wrought iron or mild steel work of any description, not otherwise provided for complete all as specified and as directed by Engr-in-Charge.

S & F rolled mild steel sections as in joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) as in strengthening of staircase and existing structuresand all similar works complete all as specified and conforming to Fe - 410 W (Grade E-250) quality 'A' including riveting / or welding and fixing with screws, bolts etc. complete all as specified and as directed by Engr-in-Charge.

M & L for preparing new wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. Make-(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

M & L for preparing old wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make-(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

M & L for preparing new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge. Make-(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

M & L for preparing old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge. Make-(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

Demolition of stone slabs and tiles of any description or thickness, laid in floors, aprons, dado etc, laid, bedded and pointed in any mortar and and removing the rubbish outside MD land complete all as specified and as directed.

M & L for machine cut Kota (greenish colour, pre polished) stone slab flooring, 20-25 mm thick, over cement screed bed 20 mm in CM (1:3) base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mrror polishing complete all as specified and directed by Engineer in Charge.

M & L for machine cut Kota (greenish colour, pre polished) stone slab, 18-20 mm thick, in one piece as in vertical surfaces, skirting etc, set and jointed in neat cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and pointed in colour cement to match including backing coat 10 mm in CM (1:3) complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position, not otherwise specifically provided for and removing of debris outside MD land complete all as specified and as directed by Engr-in-Charge

M & L for brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and as directed by Engr-in-Charge

M & L for cement concrete PCC 1:2:4, type B-1, using 20 mm nominal size graded crushed stone aggregate as levelling course of roof padding or similar works and finishing the surface even and fair complete all as specified and as directed by Engineer-in-Charge

M & L for minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using SmartCare RP or Epoxy Mortar and supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, SmartCare Ultron liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240., the system includes final base preparation, epoxy primer application and applying SmartCare Ultron or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications over and including padding of cement concrete Type B1, 1:2:4 (20 mm graded stone aggregate), 25 mm thick concrete on RCC roof surfaces and all other similar works complete all as specified and directed (SmartCare Ultron Hybrid Polyurea ) NOTE- Work to be carried out by authorised applicator of M/s Asian Paints

S & F in repairs galvanized 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc complete all as specified and as directed by Engineer-in-Charge. NOTE- Each line of wire to be measured.

S & F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including taking down existing angle iron complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings, n.exc. 15cm thickness (below or above ground level) and removal of debris outside MD land complete all as specified and as directed by Engr-in-Charge

M & L for 40mm thick cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in floor and finished even and fair without using extra cement for receiving of screed complete all as specified and as directed by Engr-in-Charge.

SAI SIDDHI CONSTRUCTION

D.S. Construction

ASHOK CONSTRUCTION

M/s Mohd Altaf Hanif Qureshi

GANGAJAL