Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹50.6 L+₹1.7 L (3.40%)Rejected-Finance 956 2 CHANDERSEKER ENTERPRISE OPP MARICAR HOSPITAL OLD CCS JUNGLIGHAT SOUTH ANDAMAN ANDAMAN NICOBAR 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹51.8 L+₹2.9 L (5.91%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹52.3 L+₹3.4 L (7.00%)Rejected-Finance NEAR PLAY GROUND BIRDLINE CALICUT POST PORT BLAIR 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹52.5 L+₹3.6 L (7.40%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹47.4 L
EMD Value
₹94,800
Closing Date
25 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Haddo
GARRISON ENGINEER HADDO Military Engineer Services Haddo Post Port Blair Andaman and Nicobar 744102
ADDITION AND ALTERATION OF SAILORS GALLEY BUILDING NO P-8A IN TRV AND CERTAIN B/R MINOR AT COAST GUARD UNDER GE HADDO, PORT BLAIR
2023_MES_572865_1
8711/GE/H/PB
Open Tender
Civil Works
Item Rate
180 days
GE Haddo Port Blair
Class D and Category a(i)
9 documents required · 9 mandatory
₹500
GE Haddo
₹94,800
Yes
21 Feb 2023
3 Jan 2023
30 Jan 2023
3 Jan 2023
25 Jan 2023
20 Jan 2023
4 Jan 2023 - 13 Jan 2023
Amount
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complate all as specified and directed
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, hacking for keys, sweeping clean and washing down with water to remove dust including taking down existing APP membrane comlete all as specified and directed
M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in roof padding complete all as specified and as directed.
Demolition of pre-cast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed
M&L for pre-cast cement concrete block masonry with solid blocks made up of (1:3:6) type C1 (using 20mm graded stone aggregate), masonry exceeding 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.
Providing precast cement concrete solid building blocks or slabs Type C1 1:3:6 (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar(1:4) complete, in walls complete all as specified and directed.
M&L for rendering in two layer i.e. 5mm thick in CM 1:4 including with mixing water proofing compound over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished even and smooth without using extra cement on all as specified.
M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.
M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard) complete all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying with 3mm average thick wall care putty and applying two coats of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.
S&F rolled sections as in post built up of one beam / channel or angle section with flanged plates, caps bases slices angle brackets cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality-A complete all as specified and as directed.
M&L for mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W (Gde E-250) Quality 'A' complete all as specified and as directed.
M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters, framing for cladding and glazing, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc., conforming to Fe-410-W (Grade E-250) Quality 'A' complete all as specified and as directed.
M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde-E-250) Quality 'A' complete all as specified and as directed.
S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
S&F for mild steel staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed
S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F pre-painted zinc coated aluminum sheet (Galvalume) GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/valley gutters, fixed with self tapping screws including scaffolding for a height upto 12.0 metres complete all as specified and as directed. NOTES: The self tapping screw shall be of adequate length to drive into complete thickness of purlin/rafter etc., and shall be fixed using neoprene and EPDM washers. Penetration and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc., as per SSR Part-I 2009 complete.
S&F for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering complete all as specified and as directed.
M&L for anodised aluminium powder coated snap grid frame work for ceiling with size of grid 605mm x 605mm all as specified in SSR Part-I 1991, including cutting, drilling, jointing etc complete including hangers 6 mm dia. G.I. wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) 605mm x 605mm size complete all as specified and directed.
M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified.
All as per item No 23 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.
M & L for providing 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in sub floors and paving etc complete all as specified and as directed
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for glazed ceramic designed coloured tiles in vertical surfaces using size of tiles 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile with and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for 18 to 20mm thick granite slab (of approved shade), machine cut, as in floors, vertical surfaces, steps (treads/risers) and the like laid over 15mm thick cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and rounding (chamfering) the edges complete all as specified and directed. NOTE : Colour of granite shall be approved by Engineer-in-Charge.
S&F for 110mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.
S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified.
S&F for 110mm dia PVC (SWR) branch piece single (Single T ) equal or unequal complete all as specified.
S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.
S&F for 75mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F for 75 mm dia PVC (SWR) bends of any radius complete all as specified.
S&F for 75 mm dia PVC (SWR) bends with acess door of any radius complete all as specified.
S&F PVC (SWR) branch piece, single (SingleT ) of radius equal or unequal, 75mm dia complete all as specified.
S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia complete all as specified.
M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified.
S&F vitreous China wash hand basin, white, flat back, size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand, 32mm dia waste coupling brass chromium plated, PVC waste pipe of suitable length, chain and plug, fixed complete all as specified and as directed.
S&F pillar tap, brass, 15mm dia, chromium plated, fancy type with capstan heads, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, fixed complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-50H or equivalent in PARRYWARE/ZOLOTO/JOHNSON
S&F bib tap, 15mm dia, cast copper alloy, chromium plated, fancy type, with capstan head screwed, screwed for iron pipe or brass ferrule, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-08H or equivalent in PARRYWARE/ZOLOTO/JOHNSON
S&F bib cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank and cup (concealed type) screwed down, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-08H or equivalent in PARRYWARE/ZOLOTO/JOHNSON
S&F health faucet (ABS Body), brass, chromium plated with 15mm dia, 1.25 m long flexible tube, screwed for iron pipe or for brass ferrule 15mm dia or bore fixed in repairs complete all as specified and as directed.
S&F angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank and cup (concealed type) screwed down, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-10H or equivalent in PARRYWARE/ZOLOTO/JOHNSON
S&F vitreous China, wash down water closet pan (pedestal pattern), white including fixing bolts and connecting to existing flushing cistern and making good disturbed surfaces to match with suroundings, fixed complete all as specified and as directed.
S&F for PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets and connecting to WC, fixed complete all as specified and as directed.
Supply and fix PVC connections 15mm size with CP nuts of length 450mm, complete all as specified and as directed.
S&F for brass chromium plated towel rail 600mm long "D" type fixed with suitable steel screw etc complete all as specified and directed
S&F corner glass shelf with brackets complete all as specified and as directed. MAKE: PRAYAG Cat part No. BEA-44 or equivalent in JAQUAR/PARRYWARE
Supply and fix PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.
S&F 20 to 25mm dia Harrison rails (curtain rails), powder coated, anodised aluminium alloy with fixing brackets, stops, rollers etc., complete all as specified and as directed.
S&F stop valves 15mm dia or bore, cast copper alloy, fancy type with long shank and cup (concealed type), chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed.
S&F for ABS chromium plated shower rose long arm with or without swivel joint any including fixing to steel pipe or union of size 125mm in repairs complete all as specified and as directed.
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 25mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
M&L for Cutting chases in PCC block masonry walls, for shelves, lintels, edges of landing etc., and making good, cutting not exceeding 10 cm girth complete all as specified and directed.
Supplying & laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed
Supplying & laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed
S&F rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top), 2000 litres capacity, hoisted and fixed in position all as specified in SSR Part I, 2009 including 25mm dia or bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball (minimum weight 455gms) screwed for iron pipe, provision of 40mm/25mm spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed.
S&Ffor providing 25mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron or CPVC pipe, fixed in repairs complete all as specified and as directed.
Disconnecting existing tank setting aside and hoisting of PVC water tank of cpacity exceeding 500 & not exceeding 1000 Ltrs including cleaning and removing all scale & dirt, etc from tanks, required reconnecting with necessary GI fittings as per site requirements and re-fixing in same position and also writing date of cleaning and due date of cleaning using enamel paint etc complete all as specified and directed.
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket and necessary Builder hardwares required for functioning etc, with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
S&F for powder coated aluminium grill (Minimum thickness of powder coating 50 micron) of approved design /patter, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.
M&L for 12mm thick particle board for insulation purposes, fixed with nails to timber, framework as per specifications and drawing complete all as specified and as directed.
Supply only 4.0 mm thick plain sheet glass, ordinary quality and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Supply only 5.5mm thick plain sheet glass, ordinary quality and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Supply only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.
Supply only 4.0 mm thick figured glass, pin head type and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S&F door closer, aluminium (extruded section body), hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed with screws complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as per specification & drawing, fixed in opening complete all as specified and as directed.
S & F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified
S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21, fixed n repairs complete all as specified and as directed.
S&F 150mm size extruded aluminium alloy handles, cast type, anodised, complete all as specified and as directed.
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed.
M&L for providing and fixing Stainless Steel (Grade 304 ) railing made of hollow tubes, channnel, plates etc., including welding, grinding, buffing, polishing and making cuvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.
S&F for glossy finished chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified and directed.
Excavation in post holes (or similar holes) each n.exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm in hard / dense soil complete all as specified and directed.
M&L for cement concrete Type C-2, 1:3:6 (using 40 mm graded stone aggregate) in post boundary pillars etc complete all as specified and directed
M&L for 6mm thick X 150mm wide non-asbestos decorative planks (shera planks) fixed to steel members with suitable screws/fasteners/nuts and bolts & washers and applying two coats syenthetic enamel paints complete all as specified and directed. Make:- Shera Planks or Equivalent
M&L for preparing bituminous surface of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows including glass beads dispenser etc. and the like n.exc 10 cm wide on road pavments with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as specified and directed by the Engineer-in-Charge. Make : STP/Reliance Thermoplast/3M or Equivalent aprroved.
Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
Taking down fuse Unit/DBs with MCB/MCCB 415 Volt/230 Volt
Taking down light fittings of any type complete all as directed
Taking down old aluminium sub main wiring of any size
M&L for Point wiring two single core 1.5 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25mm width with all fittings, surface on wall/roof /floor including sunk pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover for mounting switches/ sockets/ regulators etc. complete as specified. Make of wire : Polycab/Gloster/Anchor/Havells/ Finolex/Anchor Make of PVC Casing & caping : Modi/Precision/Supreme/Finolex /Polycab
ONE LIGHT/FAN point controlled by one, one way 6 Amps switch.
ONE 6A SOCKET OUTLET point controlled by one, one way 5 Amps switch on independent board.
ONE 6A SOCKET OUTLET point controlled by one, one way 5 Amps switch on same board with other switches.
M&L for Point wiring two single core 4.0 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 4.0 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25mm width with all fittings, surface on wall/roof /floor including sunk pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover for mounting switches/ sockets/ regulators etc. complete for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps switch all as specified. Make of wire : Polycab/Gloster/Anchor/Havells/ Finolex/Anchor Make of PVC Casing & caping : Modi/Precision/Supreme/Finolex /Polycab
S&F switch piano, flush type, single pole, one way, 5 Amps, 240 volts complete all as specified and as directed.
S&F switch piano, flush type, single pole, one way, 15 Amps, 240 volts complete all as specified and as directed.
S&F socket outlet 2 in 1, 3 pin, 5A, flush type, multipurpose, 240 volts complete all as specified and as directed. Make : Anchor / Cona / Legrand
S&F socket outlet 2 in 1, 3 pin, 15A, flush type, multipurpose, 240 volts complete all as specified and as directed. Make : Anchor / Cona / Legrand
M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 6A, 240 volts complete all as specified and as directed.
S&F electronic fan regulator for ceiling fan, step type, 5 speed, AC, 120 watts, 230 volts complete all as specified and as directed.
M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length. Make of Wire : Polycab / Gloster / Anchor / Havells / Finolex Make of PVC Casing & caping : Modi / Precision / Supreme / Finolex / Polycab
S&F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 160 Amps/200 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed. Make : Indo Asian /Havells/L&T/Legrand
Supply and Fixing 4 pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 25 KA complete all as specified and directed Make : Indo Asian /Havells/L&T/Legrand
S&F MCB, SP, "C" series, 240 volts, 6 to 32 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN /L&T/ HAVELLS
S&F decorative cute lines LED light fixture of 20 Watts capacity, 6000K, 220 Volts, 50 Hz AC supply, warm white with extruded aluminium heat sink, environmental friendly energy efficient light fitting, surface mounted including 20 Watts LED lamp and testing complete all as specified and as directed. MAKE: CG (Cat Part No : CCS-100-20-65-HL2-DP-NWH) or equivalent in PHILIPS/ LUKER/ BAJAJ
S&F of Decorative 10 watts LED luminaire with extruded aluminium channel finished in anodised IP 20, Class I power factor >0.9 pre wired with electronic driver high translucent frosted PMMA diffuser for glare free smooth lighting distribution surface mounted complete all as specified and directed. Make :CG (Cat Part No : LCTLN-10-WW 2ft)/ Philips (Cat Part No : Astra Line LED Batten 2ft) / Havells / C&S
S&F ceiling fan of 1200mm sweep, 220V, 50Hz AC supply, white colour including providing of twin core copper wire 23/0.0076 from ceiling fan to ceiling rose complete all as specified and as directed. Make : CG (Model No : Glanna) or equivalent in Usha / Orient/ Havells
S&F Exhaust fan 300mm sweep, 220Volts, AC Supply, 50 Hz with all fixing arrangement etc.,complete all as specified and directed. Make: CG Model : Trans Air 12" Reversible / Havells /Orient/Usha
S&F heavy duty Exhaust fan of capacity 380mm sweep, 1400 RPM including all accessories all as specified and as directed. Make: CG Model : EXHD380-4-1/Atomberg/ Havells/ Orient / Usha
M&L for cutting 380mm exhaust hole for fixing the exhaust fan and making good existing surface, plaster, putty and painting as per site requirement complete all as specified and as directed by Engineer-in-Charge.
S&F Wall mounting fan, 400mm sweep, 220 volts, 50 Hz, AC Supply complete with including electric connection complete all as per directed. Make : CG / Havells / Usha/ Orient
S&F AC starter switch of capacity 25 Amps working on 240 Volts, AC supply suitable for split type airconditioner complete all as specified and as directed. MAKE: CRAB TREE Cat part No. ACTO252504 or equivalent in ANCHOR/HAVELLS/L&T
Taking down old unserviceable street light mounting bracket od any size and S&F new bracket made up of 25mm dia galvanised steel tubing, medium grade, 1.20 metres long, bent to shape with inner angle not less than 120°, with and including necessary fixing clamps fabricated out of angle iron/flat iron of suitable size, bolts, nuts and washers as required and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.
S&F 25 watts LED building security light fittings IR 65 luminaire. Pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 including necessary fixing arrangements as per site requirements complete all as specified and directed. Make : C & S Model No. LTESSE25WLED/ Philips Model No. BRP020LEDHP/CW240V25/ CG Cat No - LSTS-25-CDL/ Havells/ Luker Cat Part No : LOHY210 WH
Supplying, laying, testing and commissionig of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 4 core, 16 Sqmm laid in trenches/floors/ducts or fixed on poles/walls with suitable clamps/saddles or drawn through pipes etc., including connecting up with suitable size of lugs, glands and jointing material complete all as specified and as directed. MAKE : POLYCAB/ GLOSTER / ANCHOR / HAVELLS / FINOLEX
M&L for HDPE DWC (Double wall corrugated) pipe of size 50mm (Outer diameter) x 38mm (Inner diameter) along with connected accessories like couplers, bends, end caps etc., laid in trenches/floors/ducts or fixed on poles/walls for as in protection of LT/ HT cable complete all as specified and as directed. Make : REX POLYEXTRUSION LTD/ Tirupati plastomatics Pvt Ltd
M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.
CHANDER SEKER ENTERPRISE
M/s K Moorthi
M/s Saina Enterprises
T.M.RAMANATHAN AND SONS
M/S VISHAL CONSTRUCTION
M/s Ramesh Lal
DEEPAK AGENCIES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .