SPECIAL REPAIR TO BLDG NO S AND T-04 (JCOs MESS) OF 304 (I) SUP PL ASC AT JUTOGH UNDER GE JUTOGH

Amount

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified and directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:4, straight or curved on plan to any radius in half brick thick wall, complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified and directed.

M&L for rendering 15 mm thick on fair surfaces of brickwork or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair surfaces of brickwork or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 25 mm thick plaster in CM (1:4) on brick or concrete surface in two layer of 15mm and 10mm thick each. Second coat of 10mm thick mixed with water proofing compound as per manufacturer instruction finished fair & even complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only water proofing compound ISI marked compound complete all as specified and directed.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8, type D-2, using 40 mm graded crushed stone agg as in sub base complete all as specified and directed.

M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick of size 300X300X7 to 8mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles as in skirting/dados complete all as specified and directed.

M&L for Vitrified Ceramic coloured tiles dark shade polished, area of each tiles 600X600X8-9mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

S&F Vitrified ceramic coloured tiles dark shade of size 600X600X8-9 mm thick, set & jointed in neat cement slurry & pointed in white or coloured cement to match on vertical surfaces such as skirting, dados and risers to steps over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes, complete all as specified and directed.

Taking down Chowkhats or frames exc. 1.5 sq. m but n.exc 4 sqm each with shutter (without taking off shutters from the frames) and removing from site complete all as specified and directed.

Taking down Chowkhats or frames n exc. 1.5 sq. m each with shutter (without taking off shutters from the frames) and removing from site complete all as specified and directed.

M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work new work built in CM 1:4, compete all as specified and directed.

S&F pressed steel frames of size 105mmX60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F Flush shutters, 35 mm thick, solid core construction, with particle board core and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x47mm made out of 5mm thick plain coloured PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M S tubes for top & bottom rails M S frame shall be covered with heat moulded plain colour PVC ‘c’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour pick sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail, Paneling of colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable pick sheet beading and jointed together with solvent cement complete all as specified and directed.

M&L for preparation of surfaces and applying two coats synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over and including one coat pink primer complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooded bead built in squares exceeding 0.5 sq.m in each pane, in repair, complete all as specified and directed.

S&F butt hinges 100 mm size medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F butt hinges 75 mm size medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150 mm size complete all as specified and directed.

S&F 200 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S&F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S&F 250 mm aluminium anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.

M&L for preparation of surfaces and applying two coats synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth over and including one coat of red oxide primer complete all as specified and directed.

S&F in repairs 15 mm bore bib taps fancy type cast copper alloy with crutch with butter fly handle, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repairs 15 mm bore angle stop valves cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed, complete all as specified and directed.

S&F in repair 15 mm bore pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screed down high pressure, with or without lettered 'Hot; or 'cold' with long screwed shanks and fly nut, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repairs water closet pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and directed.

S&F in repairs plastic water closet seat cover, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F in repairs 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back size 580x450 mm including brackets, complete all as specified and directed.

S&F in repairs towel rail 600 mm long of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats (minimun weight 190 gms), complete all as specified and directed.

S&F PVC connection 450mm long and 15 mm dia with PTMT nut complete all as specified and directed.

Dismantling water tanks or capacity exceeding 500 ltrs and not exceeding 1000 ltrs, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 1000 litres capacity, three layered, marked embosed, hoisted and fixed in position including connecting up pipes complete all as specified and directed.

M&L for 15 mm bore ball valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or ferrule, complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

M&L Galvanised mild Steel water tubes,15 mm bore with all fittings, medium grade, galvanised, fixed to walls, concealed or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

M&L Galvanised mild Steel water tubes, 20 mm bore with all fittings, medium grade, galvanised, fixed to walls and concealed or laid in floors complete all as specified and directed.

S&F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed.

M&L for prepartion of newly plastered surface of wall and applying two coats of weather proof paint on external surfaces over and including a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of 1mm thick wall care putty complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern in roof covering, complete all as specified and directed.

M&L for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for truss/purlin/rafter complete all as specified and directed.

M&L for M S Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W (Gde-E-250) quality B, complete all as specified and directed.

S&F 1.25 mm thick Mild steel sheet eaves gutters, galvanised class 3, half round in 150mm dia with rounded edges complete all as specified and directed.

S&F in repair cast iron P or S traps of 100mm dia to connect the WC to outlet pipes including making the joints water tight, complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550x400mm excluding tap waste pipe chain and plug but including brackets incl CP brass coupling and PVC waste pipe complete, fixed as in repairs, all as specified and directed .

M&L for PVC floor trap 75mm dia, plain with grating including jointing to waste pipe with solvent cement in floors and making them water tight,complete all as specified and directed.

M&L for applying two coats of synthectic enamel paint including one coat red oxide zinc chrome primer and preparation of surfaces at new eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc, complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified and directed.

M & L for 4mm thick non asbestos fibre cement building boards (E board designer) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

S&F GI frame work of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M & L for chequered cement concrete tiles pre polished lacquer finish 30cmx30cmx22-25mm thick, set ,jointed and pointed in neat cement slurry with grey cement and pigment in floors.complete all as specified and directed.

S&F Aluminium anodised powder coated sliding type three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass , size of frame 61.50 x 31.75 x 1.3mm thick for top and sides, 68.50 x 31.75 x 1.2mm thick, bottum and shutter frame 38 x 18 x 1.5mm thick, Aluminium grill 6 mm dia design No. DG-102 make DEDO grill or design No. A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts etc. complete all as specified and directed.

S & F aluminum section powder coated of colour as approved door with frame and shutters partially glazing 5.5mm thick one side refelctive glass (tinted glass) and PVC composite board 5mm thick fixed with aluminium clip section door section of aluminium door shutter as under complete and all as specified and directed (I) Frame 100x40x2mm (ii) shutter style 85x44.45x3mm thick section (iii) Top rail 95.25 x44.45x1.7mm thick (iv) middle rail 83.50x44.75x1.7mm thick (v) Bottom rail 114.30X44.15X1.7 thick section (vi) Glazing clip 0.7mm thick (vii) 2 Nos Handle Powder coated Aluminium 200mm long as approved (viii) Tower bolt 9.90mm dia and 200mm long (ix) Mortice lock 100MM 7 LIVER make Godreg (x) Hold fast aluminium 100mm long (xi) 1 Nos Floor door spring each shutters (xii) Reinforced with 2 No 10mm dia MS bar with bolt complete on top and bottom rail of door complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section, in any position in framed work complete all as specified and directed.

S&F 2nd class hard clean swan wood in scantling, ceiling, purlin etc complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggreate as in plinth protection, the plinth protection shall be laid in alternate bays, laid in slope, including finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L for complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped with wall care putty incl preparation of surfaces and applying two coats of oil bound distemper complete all as specified and directed .

M&L for complete removal of existing treatment of plastered or unplastered old decorated surface of walls by brooming down and applying two coats of weather proof anti fungal exterier emulsion paint on external surfaces over and incl a coat of alkali resistant priming paint at any height of building/ tower complete all as specified and directed.

M&L for preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of white / approved shade complete all as specified.

S & F sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastecoupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition)of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for RCC (nominal mix) 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns; in floors, roofs, landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L 20mm thick granite (of any type ) work table rubbed and polished ) in pillar/vertical surface,cooking platform and like in cement mortar 1:4 including in poing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F in repair for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F harrison rails, mild steel, chromium plated with fixing brackets, stops rollers etc. complete all as specified and directed.

S&F TMT bar 10mm dia and over cut to length bent to shape required incl cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia complete all as specified and directed.

Formwork flat rough finished surfaces of concrete to soffits of suspended slabs, roof slabs, landings and similar work complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for re use to be measured separetly including making good the disturbed portion/surface complete all as specified and directed.

M&L for Point wiring with colour coding multistranded copper conductor cable, PVC insulated(FRLS) and unsheathed size 1.5 sqmm with PVC Casing & Caping with fixing accessories, to be fixed, for one light/fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet/modular with all fittings (ISI Marked) incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 sqmm for earth wire conncected to common earth dolly complete all as specified and directed.

All as per Srl item No 86.00 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5 sqmm wire with 1.5sqmm earth wire complete all as specified and directed.

All as per Srl item No 86.00 above but for one 3/5 pin socket 5 Amp on same board, with 1.5 sqmm wire with 1.5 sqmm earth wire complete all as specified and directed.

All as per Srl item No 86.00 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4 Sqmm complete all as specified and directed.

S&F switch piano flush type/Bell push/, 5 Amps, single pole one way complete all as specified and directed.

S&F multi socket 5 pins, 6 Amp, flush type piano (multi purpose) complete all as specified and directed.

S&F multi Socket 15 Amps flush type, 6 Pin, 230 Volts , AC complete complete all as specified and directed.

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed.

S&F ceiling rose, surface backlite, 65x50mm, three terminals, complete all as specified and directed.

S&F angle lamp holder PVC/Polycarbonate base / back incl LED Bulbs 9W B-22 Pin type complete all as specified and directed.

S&F Ding Dong door bell 230 volt AC complete all as specified and directed.

S & F LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete and including taking down existing fittings complete all as specified and directed. Make : BAJAJ cat part no:BCLSB 20 WH/ Havells cat part no: LUMILINEBS20WLED865SPCWH/ CG cat part no : LCTL-18-CDL

S&F in repairs Skylite recess mounting,36W, LED 2'x2' luminaire integrated electronic driver, optics diffused, complete all as specified and directed. Make : BAJAJ cat part no:BCTBLR 36W LED/ Havells cat part no: PLUTONEO2X2PLR34WLED857S/ CG cat part no : LCTLRN-36-FO-CDL .

S&F LED 6000K (2’ feet), 10W Decorative LED lighting fixture with extruded PVC . heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down existing fittings complete all as specified and directed. Make :- BAJAJ cat part no:BCLSB 10 W / Havells cat part no: LUMILINEBS9WLED865SPCWH/ CG cat part no : LCTL-9-CDL

S&F LED building secuity light 25 watt, incl bracket as per suitable size and all connected accessories ( clamps, nut, bolt etc)complete and including taking down existing fittings complete all as specified and directed.

M&L for submain wiring with 2X6.0 sqmm +1X4.0sqmm earth wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC conduit 25mm dia with all accessories including taking down complete all as specified and directed. Note: Two run of 6sqmm and 1 Run of 4sqmm wire and 1 Run of PVC casing-N-caping shall be measured as One RM

S&F in repairs VTPN prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way ccomplete all as specified and directed. Make: Legrand IP-54-IK-09 Cat No. 607770 or equivalent in Schneider/Havells/ L&T/ ABB/ CG. Note : Rates of MCCB and MCB SPN/SP/TP shall deemed to be included in the quoted rates.

S & F in repairs single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed.

S&F MCB SPN 06 to 40 Amps 240V incl all termnials, fitting including taking down etc complete all as specified and directed.

S&F RCBO for earth leakage , over load & short circuit protection 2 pole ,40 Amp rating, 300mA capacity suitable for 240 Volts including taking down complete all as specified and directed.

S&F MCB SP 06 to 40 Amps 240V incl all termnials, fitting including taking down etc complete all as specified and directed.

S&F MS Exhaust fan of size 280/300 mm sweep(heavy duty) single phase complete and including taking down old type exhaust fans & deposit to MES store yard complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.

Dismantling and taking down existing unserviceable cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored of any size all as per directed by engr in charge

Supply, Fixing and laying 35 sqmm 3.5 core 1100V graded heavy duty cable XLPE insulated stranded AIuminium conductor served underground cable complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in soft / loose soil including taking out faulty cable / cable / cable covers and GI pipe complete all as specified and directed.

Returning filling in, including spreading levelling watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc 50m distance and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Supply, fixing or laying HDPE (DWC) tubing 50 mm dia (OD) of pressure rating 6Kgf/Cm2 fixing on poles, walls under floors, road crossing, laying in trenches, laying on surface etc as reqd at site complete all as specified and directed. Note: The rates of required accessories, bend, joints, nut bolts, clamps etc deemed to be included in quoted rates .

M/S Shiv Kumar

M/S Jaswant Kumar Aggarwal

PRITPAL SINGH

M/S Meera Builders

NIRMAL SINGH BHOGAL AND SON