Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62.3 CrAccepted-AOC | ₹62.3 Cr Quoted ₹6.2 Cr | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹6.5 CrRejected-AOC THAROCH HOUSE SANJAULI SHIMLA H P 171006 | SHIMLA | HIMACHAL PRADESH | 171006 | ₹6.5 Cr | L2 | Rejected-AOC L2 |
| 3 | L3₹7.6 CrRejected-AOC | ₹7.6 Cr | L3 | Rejected-AOC L3 |
Tender Value
₹6.5 Cr
EMD Value
₹13 L
Closing Date
16 Sept 2022, 11:00 amClosed
Executive Engineer
HPTDC Ritz Annexe Shimla
Special repair of State Guest House/Peterhof (Raj- Bhawan) Shimla (H.P).
2022_HPTDC_64525_1
Proj./2-148/2022
Open Tender
Civil Works
180 days
Peterhof Shimla
Please refer Tender documents.
6 documents required · 6 mandatory
₹5,000
MD HPTDC
₹13 L
9 Jan 2024
6 Sept 2022
16 Sept 2022
6 Sept 2022
16 Sept 2022
6 Sept 2022
6 Sept 2022 - 16 Sept 2022
Amount
Dismantling/removing doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking useful materials in specified dimensions as per the direction of Engineer-In-Charge including disposal of unservicebale materials of area 3 sq. metres and below.
Demolishing brick work manually/ by mechanical means including stacking of serviceable materialin specified manners and disposal of unserviceable material within all lead as per direction of Engineer-in-charge. In cement mortar
Removing mortar from bricks and cleaning bricks including stacking in specified manners as per the direction of Engineer-In-Charge (stacks of cleaned bricks shall be measured) From brick work in cement mortar .
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all lead and lift as per the directions of Engineer-In-Charge For thickness of tiles 10 mm to 25 mm.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all lead and lift as per the directions of Engineer-In-Charge For thickness of tiles 25 mm to 40 mm.
Dismantling of wooden floors upto floor two level including stacking of useful materials in specified dimensions as per the direction of Engineer-In-Charge including disposal of unservicebale materials (joists to be measured and paid for separately.
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. Door chowkhats Renewing glass panes, with wooden fillets wherever necessary including carriage of materials within all leads, lifts and heights.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking useful materials in specified dimensions as per the direction of Engineer-In-Charge including disposal of unservicebale materials of area beyond 3 sq. metres.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish as per direction of Engineer-in-charge.
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge For door/ window/ clerestory window
Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.
Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 15 km periphery area for all lifts, complete as per directions of Engineer-in-charge.
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete as per direction of Engineer-in?Charge. With cement mortar 1:4 (1 cement : 4 fine sand) .
Excavation work all type of rocks by manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within all leads including carriage of materials within all leads and lifts.
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of materials within all leads, lifts and heights.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads and lifts.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads, lifts and heights.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads, lifts and heights.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of materials within all leads, lifts and heights. Tata/Sail or approved make as specified by HPPWD.
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) With F.P.S.(non modular) bricks including carriage of materials within all leads, lifts and heights.
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) With Modular bricks including carriage of materials within all leads, lifts and heights.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of materials within all leads, lifts and heights.
Brick edging laid lengthwise with half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials within all leads, lifts and heights.
Stone work (machine cut edges) for wall lining etc.(veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (Tobe secured to the backing and the sides by means of cramps and pins which shall be paid for separately) White sand stone as per the direction of Engineer-In-Charge - exposed face fine dressed with rough backing 30 mm thick including carriage of materials within all leads, lifts and heights.
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with approved make water proofing cement compound consisting of applying First layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b)Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.(The rate includes preparation of surface,treatment and sealing of all joints, corners,junctions of pipes and masonry with polymer mixed slurry.) including carriage of materials within all leads, lifts and heights.
Providing wood work Second class teak wood in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) including carriage of materials within all leads, lifts and heights.
Providing wood work with Sal wood in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.including carriage of materials within all leads, lifts and heights.
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Kiln seasoned and chemically treated hollock wood including carriage of materials within all leads, lifts and heights.
Providing and fixing 35mm thick second class Teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in?charge. including carriage of materials within all leads, lifts and heights.
Providing and fixing plywood 12mm with 4 mm thick veneer , one sidedecorative veneer conforming to IS: 1328 (type-1) Green Ply/Century/Merino, forplain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture including carriage of materials within all leads, lifts and heights.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWRType Green Ply/Century/Merino/Kit Ply including carriage of materials within all leads, lifts and heights.
Providing and fixing 35 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including Stainless Steel butt hinges with necessary screws including carriage of materials within all leads, lifts and heights.
Providing and fixing Second class teak wood wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws ncluding carriage of materials within all leads, lifts and heights.
Providing and fixing wooden moulded beading 2nd class Teak Wood 50X20mm to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete including carriage of materials within all leads, lifts and heights.
Supplying and fixing 5mm thick Float glass panes Modi Guard/Saint-Gobain (weight not less than 12.5kg/sqm) including removal of old glass with necessary nails and putty as per the direction of Engineer-In-Chargeincluding carriage of materials within all leads, lifts and heights.
Providing and fixing Coat Hook made in Brass of approved make or design as per the direction of Engineer-In-Charge including brass screws etc complete including carriage of materials within all leads, lifts and heights.
Providing and fixing Door Hinge size 8 " Article code 7907. Finished SS matt Godrej or equivelent as per the direction of Engineer-In-Charge with necessary screws etc. complete including carriage of materials within all leads, lifts and heights.
Providing and fixing Mortice Handle with Lock and Cylinder for Toilet Door , Article code 5992. Finished SS matt Godrej or equivelent as per the direction of Engineer-In-Charge with necessary screws etc. complete including carriage of materials within all leads, lifts and heights.
Providing and fixing Exposed Hercules Door closer, weight capacity upto 60 kg , Article code 5959. Finished SS matt Godrej/Ozone or equivelent as per the direction of Engineer-In-Charge with necessary screws etc. complete including carriage of materials within all leads, lifts and heights.
Providing and fixing Concealed Door closer, weight capacity upto 80 kg , Article code 3798. Finished SS matt Godrej/Ozene or equivelent as per the direction of Engineer-In-Charge with necessary screws etc. complete including carriage of materials within all leads, lifts and heights.
Providing and fixing Magnetc Door stopper, Article code 4042. Finished SS matt Godrej or equivelent as per the direction of Engineer-In-Charge with necessary screws etc. complete including carriage of materials within all leads, lifts and heights.
Providing, fixing & applying POP false ceiling consisting of frame G.I. channel main, cross and L & hanging member of heavy quality size & shape with wire gauge mesh. Apply P.O.P. to the expended metal of thickness 10mm thick finish smooth to line & level and design including carriage of material with all lead & lifts. complete to the entire satisfaction and design/drawing of Architect and as per the direction of Engineer-In-Charge. make- Sakarni/Sriram/Adhar Shree Flat/Curved surfaces
Extra for sunk or raised P.O.P mouldings as per the design and direction of Engineer-In-Charge in the plaster of Paris ceiling including carriage of material with all lead & lifts. complete to the entire satisfaction of Architect. make- Sakarni/Sriram/Adhar Shree Flat/Curved surfaces .
Providing and fixing P.O.P punning on walls where ever required , in sakarni or sriram masala with 12 mm average thickness on vertical and horizontal surfaces of walls wherever required in plumb and line and level to entire satisfaction of Engineer in Charge including carriage of material with all leads & lifts . Make- Sakarni/Sriram/Adhar Shree including all carriage of materials in all leads, lifts and heights.
Providing and fixing 1st class deodar wood.12mm thick wooden plank ceiling with planks over lapping each other and jointed with wood screws (frame work to be paid for separately) including carriage of materials in all leads, lifts and heights.
Providing and fixing 12mm thick water proof kit ply of approved shade/quality ISI mark and colour in panelling & wall linning i/c mitring at junctions , butt jointing and nails complete (Frame work for base to be measured & paid for separately) including carriage of materials in all leads, lifts and heights. Green Ply/Century/Merino make.
Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 8 mm thick Cement bonded wood particle board as per IS:14276 including all carriage of materials in all leads, lifts and heights.
Providing and pasting on ceiling / wall, wall paper of approved make/design as per the design of Architect and direction of Engineer-In-Charge including all carriage of materials in all leads, lifts and heights. (Basic rate not less then Rs. 200 sqft).
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, Green Ply/ Century /Merino including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel platedbrackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. as per the direction of Engineer-In-Charge all complete including carriage of materials in all leads, lifts and heights.
Extra for using veneered particle board conforming to IS3097 Grade I, Green Ply/ Century/Merino in item of pelmet 18mm thick 150mm wide including carriage of materials in all leads, lifts and heights.
Providing and fixing 2nd class Indian teak wood 45mm thick louvered shutters with fixed venetain 12 mm thick for windows including black enamrlled/bright finished M.S. butt hinges with necessary screws including carriage of materials in all leads, lifts and heights..
Extra for Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. of approved make as per the direction of Engineer-In-Charge complete including carriage of materials within all leads, lifts and heights. 125x64x1.90 mm
Providing and fixing 150 mm oxidised M.S. double acting spring hinges (Heavy Duty) as approved by the Engineer-In-Charge make with necessary screws etc. complete including carriage of materials within all leads, lifts and heights.
Providing and fixing 150x10 mm bright finished brass tower bolts (barrel type) as approved by the Engineer-In-Charge make with necessary screws etc. complete including carriage of materials within all leads, lifts and heights.
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete including carriage of materials within all leads, lifts and heights.
Providing and fixing 125 mm bright finished brass handles of approved make with screws etc. complete including carriage of materials within all leads, lifts and heights.
Providing and laying of 4 mm x 5 mm SS strips of approved make in ply wood /veneer fixing with Addhesive after making groove on ply /veneer face as per design of Architects and Engineer-In-Charge all complete including carriage of materials in all leads, lifts and heights.
Providing and fixing 75 mm x 60mm rounded hand rails in straight length complete in 1st class indian teak wood as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.
Extra for hand rails if sunk to receive iron core including carriage of materials in all leads, lifts and heights.
Providing and fixing aluminium work Jindal/Hindlco or equivelent make for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including carriage of materials within all leads, lifts and heights.
Providing and fixing aluminium work Jindal/Hindlco or equivelent make for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) including carriage of materials within all leads, lifts and heights.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including carriage of materials within all leads, lifts and heights.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all leads, lifts and heights.
Providing and fixing 0.60mm thick Tata Durashine or equivelent prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.
Providing and fixing flushing 38 cm overall with 0.60mm thick prepainted sheet roofing with hot dipped matelic zinc coated sheet with top coat of regular modified polyster organic coating of 20 micron over 5 micron primer coating + back coat of polyster of 5 micron over 5 micron primer coating including fixing with iron J or L hooks bolts and nuts 6mm dia meter and prepaited G.I. Limpet and bitumen washer complete with all accesories as required and as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc including carriage of materials within all leads, lifts and heights.
Supplying and fixing of class 32 Pre-laminated wooden floor HDF 8mm thick (EI-Grade) Density min 830 kg/m3 of class 32 décor laminate min overlay 0.2mm melamine based paper treated with AI203 with abrasion resistance AC4, IP_>4000, impact Resistance IC2 Resistence to staining GROUP 4 with thickness swelling _< 18% height difference _>0.15mm with edge tolerance to 0.5-1.0 mm /mtr with underlay armor as desired 0.8-1.0 mm thick of Elegance/Green panel or equivelent as approved by Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing Door profile for prelaminated wooden flooring of Elegance/Green panel or equivelent as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing Skirting Readymade 2.4m length laminate flooring of Elegance/Green panel or equivelent as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Supplying and fixing of class 33 Pre-laminated wooden floor HDF 12mm thick Density min 850 kg/m3 of class décor laminate min of 0.4 mm of overlay of melamine based paper with abrasion resistance cycle _>6000, impact Resistance IC in IC3 for 33th class, Scratch Residence EN438>3.5: satin resistance Class -5 thickness swelling _< 18% height difference max _>0.15mm with edge tolerance to 0.5-1.0 mm /mtr with underlay armor as desired 0.8-1.0 mm thick, surface soundness >1.25 N/mm of Elegance/Green panel or equivelent as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 300X450mm, 450x600 mm or any size Nitco/Kajaria/RAK or equivelent including carriage of materials within all leads, lifts and heights. (Basic rate not less than Rs. 60.00 per Sqft)
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 1200x600 mm or more any size Nitco/Kajaria/RAK or equivelent including carriage of materials within all leads, lifts and heights. (Basic rate not less than Rs. 75.00 per Sqft)
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make and approved size 300X600mm or more any size, in all colours, shades as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete Nitco/Kajaria/RAK or equivelent including carriage of materials within all leads, lifts and heights. (Basic rate not less than Rs. 50.00 per Sqft)
Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as per the directed by the Engineer-in-Charge 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. including carriage of materials within all leads, lifts and heights. (Basic rate not less than Rs. 320.00 per Sqft)
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone/Granite/Marble as per the directed by the Engineer-in-Charge.
Marble work (table rubbed and polished) for wall lining (Veneer work) 4cm. thick in cement mortar 1:3 (1 cement:3 sand) including pointing with cement mortar 1:2 (1 White cement:2 marble dust) with an admixture of pigment to match the marble shade Bhanslana black marble as per direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
20 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) as per direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as per the directed by the Engineer-in-Charge. 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. including carriage of materials within all leads, lifts and heights. (Basic rate not less than Rs. 320.00 per Sqft)
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4(1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as per the directed by the Engineer-in-Charge Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of materials within all leads, lifts and heights. (Basic rate not less than Rs. 220.00 per Sqft)
Providing and laying Hand Made floor tiles 30mm thick in different sizes (thickness to be specified by the manufacturer) of approved make/design with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., as per the directed by the Engineer-in-Charge complete including carriage of materials within all leads, lifts and heights. (Basic rate not less then Rs. 150 sqft/-)
Providing and laying LAKASA tiles ( 200 x 200 mm) in grey/coloured of required shade of approved make/design in Floor and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed With neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per the directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. (Basic rate not less then Rs. 300 sqft/-)
Providing and laying IPE (MAKE - SQUAREFOOT) or equivelent Wooden flooring for external use all complete as per manufacturer specification ( IPE - OUTDOOR FLOORS 19mm x 133-138mm x 1800 RL ) as approved by the Engineer-in-Charge including carriage of materials within all leads, lifts and heights.
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Marble work including carriage of materials within all leads, lifts and heights.
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete including carriage of materials within all leads, lifts and heights.
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places including carriage of materials within all leads, lifts and heights.
Supplyng and fixing of laser cut screen in powder coated MS sheet 1.5mm thick with fittings 2.700 x 0.750mm sample to be approved before fixing as per the design and direction of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Supplying and fixing of laser cut Signage out side door in SS plate matt finish 1.5 mm thick with acrylic box 2 at the back and provision for light ( size 450 x 250 mm) sample to be approved before fixing all complete as per the design and direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Supplying and fixing Corridor Signage 450 x 250 sample to be approved before fixing with room No., Engraved SS plate matt finish 1.5 mm thick with back eching of approved design with fixing all complete including carriage of materials within all leads, lifts and heights.
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture as per the design and direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Painting texture paint of approved make and design/pattern as per the design and direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @0.90 litre/10 sqm as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Wall/Ceiling painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Applying priming coats with primer of approved brand and manufacture, having low VOC (VolatileOrganic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Applying priming coat with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Polishing on wood work with ready mixed wax polish of approved brand and manufacture New Work as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Polishing on wood work with ready made wax polish of approved brand and manufacture Old Work as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Melamine polishing on wood work (one or more coat) of approved shade and finish as per the direction of Engineer-In-Charge including surface cleaning of all dirt and dust ,sand papered smooth including a coat of wood filler including carriage of materials within all leads, lifts and heights.
Removing old paint or polish from wood and wood based surfaces with paint remover of approved brands and manufacture and making the surface even with paint remover of approved brand and manufacture as per the saticification of Engineer-In-Charge.
Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth including necessary repairs to scratches etc. complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, Birla/JK white/Asian make over the plastered wall surface to prepare the surface even and smooth complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
12 mm cement plaster of mix in fair side of brick/concrete work in Cement Mortar 1:6 (1Cement:6 sand) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights..
Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand) Moulded Band as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Finishing walls with textured exterior paint of approved shade and design two or more coats applied @ for external plaster are for height upto 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, all complete as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing 'Unistone' or equivalent Glass Reinforced Concrete (G.R.C) ornamental Screens in approved size, pattern, design, thickness and color of M/S UniStone make or equivalent. The Screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, The material casting should take place in FRP Mould with 'Power Spray machine' with Spray Mix design methodology. The erection of screens should be done with 'Dry Fixing method on to structural support members i.e. RCC, Brick work or M.S with Hilti or Fischer fasteners or Microtek Self Tapping screws. The quantity of fasteners or self tapping screws shall be calculated in accordance to weight of screen and actual site fixing conditions. Vendor shall submit shop drawings of same, duly approved from Engineer in charge at site including carriage of materials within all leads, lifts and heights.
Walls Printed Panels:Supply & fixing of ASP acoustic panels in non-wovenpolyester fibre acoustics panels made from Recycled fibre from waste PET bottles.It should have a density open cell construction whichresult in high sound absorption and thermal insulation.Thickness of 10mm with Density of 2000gm/sqm and high acoustic performance of up to 0.9NRC. It should be Formaldehyde free with high resistance to humidity & moisture.It should be light weight, flexible, highly versatile and should be impact resistance as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Supplying and fixing Windows Laser Cut Panels:Laser cut Panels would be fixed over the windows so as to make the cover and with design for lights as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing double scaffolding system (cup locktype) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre,horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer?in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance workjudicially, necessary deduction for scaffolding in the existing item to be done including carriage of materials within all leads, lifts and heights.
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials within all leads, lifts and heights.
Providing and fixing in position wardrobe Dresser (as per drawings attached) with 19 mm ply board of Kit ply/Marino/Century or equivalent finished with 1.00 mm thick coloured or laminated sunmika sheet Century/Marino/Green ply or equivalent inside with anti-treatment with all fittings like hinges, brass handles, catcher, Godrej make locks, Telescopic drawer channel of required size (4mm looking mirror with backing of ply wood if required) as per the direction/design of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing in position CB-1 (as per drawings attached) with 19 mm ply board of Kit ply/Marino/Century or equivalent finished with 1.00 mm thick coloured or laminated sunmika sheet Century/Marino/Green ply or equivalent inside with anti-treatment with all fittings like hinges, brass handles, catcher, Godrej make locks, Telescopic drawer channel of required size (4mm looking mirror with backing of ply wood if required) as per the direction/design of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing in position CB-4 (as per drawings attached) with 19 mm ply board of Kit ply/Marino/Century or equivalent finished with 1.00 mm thick coloured or laminated sunmika sheet Century/Marino/Green ply or equivalent inside with anti-treatment with all fittings like hinges, brass handles, catcher, Godrej make locks, Telescopic drawer channel of required size (4mm looking mirror with backing of ply wood if required) as per the direction/design of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing in position TC-1 (as per drawings attached) with 19 mm ply board of Kit ply/Marino/Century or equivalent finished with 1.00 mm thick coloured or laminated sunmika sheet Century/Marino/Green ply or equivalent inside with anti-treatment with all fittings like hinges, brass handles, catcher, Godrej make locks, Telescopic drawer channel of required size (4mm looking mirror with backing of ply wood if required) as per the direction/design of the Engineer-In-Charge including carriage of materials within all leads, lifts and heights.
Providing and fixing in position wardrobe CB- 3 of ( size 1.100 x 2.400 ) with 19 mm ply board laminated in side and veneer outside , with antitermite treatment all fittings etc complete CB-3 Cup Board - ( 1.100 x 0.600 x ht 2.400)
Providing and fixing in position wardrobe CB- 4 of ( size 1.100 x 2.400 ) with 19 mm ply board laminated in side and veneer outside, with antitermite treatment all fittings etc complete CB-4 Cup Board - ( 1.100 x 0.600 x ht 2.400)
Providing and fixing in position TC-1. with 19 mm ply board laminated in side and veneer outside, with antitermite treatment all fittings etc complete
Providing and fixing in position TC-3 of ( size 1.175 x 1.350 ) { TC-3.} with 19 mm water proof ply board laminated in sideand veneer outside, with antitermite treatment all fittings etc complete
Providing and fixing in position Built in TV Unit panel A-2 as per Drawing RT-3 for Bed room of old & new Buildings it consist of 2 nos shalf of size and of 1.200 x 0.200 mm & 0.700 x 0.200 mm each with 40 mm thick & two nos Drawers of size 0.300 x.0.200 x o.150 mm with laminate in side all complete. ( A-2 ).
Providing and fixing in position Toilet Counter ( size 900 x 600 x 300 ) with 19 mm ply board laminated both side, and top counter with ITALIAN Marble.
Providing and fixing in position Toilet Counter ( size 1.200 x 600 x 300 ) with 19 mm ply board laminated in side, and top counter with ITALIAN Marble.
Providing and fixing in position Coffee Unit of ( size 0.600 x 0.600 x 0.950 ) with 19 mm ply board laminated in side and veneer outside, with antitermite treatment all fittings etc complete Room-1
Providing and fixing in position Coffee Unit of ( size 0.750 x 0.600 x 0.950 ) with 19 mm ply board laminated in sideand veneer outside, with antitermite treatment all fittings etc complete Room-1
Providing and fixing in position Coffee Unit of ( size 1.000 x 0.0.580 x 0.950 ) with 19 mm ply board laminated in side and veneer outside, with antitermite treatment all fittings etc complete Room-9
Providing and fixing 600 x 120 x 5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
Providing and fixing Bathroom Glass Partition with toughened shower glass / SS frame in all bathrooms Size (750 x 2100ht t) as approved design etc complete
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with bevailed eadge of approved make and shade with 6 mm thick hard board backing : Size is 1200 x 1500 mm
Providing and fixing looking mirror Size 2.2 x 2m including 12mm kit ply board. All complete.
Providing and fixing looking mirror Size 2m x 2m including 12mm kit ply board. All complete.
Providing and fixing (Round glass ) with frame
Providing and fixing in position L-1 Luggage Rack of ( size 1.350 x 0.700 ) { L-1.} with 40 mm ply board laminated in side, and Top with ITALION MARBLE, Along with antitermite treatment all fittings etc complete
Providing and fixing in position A-1 Study unit Rack of ( size 1.1.195 x 1.529 ) { A-1.} with 25 mm ply board laminated one side. Along with SS strio & antitermite treatment all fittings etc complete
Providing and fixing to wall ceiling & floor galvanised iron mild steel tubes(heavy grade) tube fitting and clamps including making good the wall,ceiling and floor of approved make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. Tata/Jindal or equivelent make. 32mm nominal size
Providing and fixing to wall ceiling & floor galvanised iron mild steel tubes(heavy grade) tube fitting and clamps including making good the wall,ceiling and floor of approved make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. Tata/Jindal or equivelent make. 40mm nominal size
Providing and fixing to wall ceiling & floor galvanised iron mild steel tubes(heavy grade) tube fitting and clamps including making good the wall,ceiling and floor of approved make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. Tata/Jindal or equivelent make. 50mm nominal size
Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm nominal bore by providing and fixing tee including cutting and threading the pipe complete including carriage of materials within all leads, lifts and heights.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing, of joints complete as per direction of Engineer in Charge 75 mm nominal inner dia Pipes including carriage of materials within all leads, lifts and heights.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing, of joints complete as per direction of Engineer in Charge 100 mm nominal inner dia Pipes including carriage of materials within all leads, lifts and heights.
Providing fixting PVC floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm Everest/RIF or equivelent conform to IS 1530 :1986 and IS 1537 : 1976 complete including cost of cutting and making goods the walls and floors including carriage of materials within all leads, lifts and heights. 75mm nominal diameter
Providing fixtingPVC floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm Everest/RIF or equivelent conform to IS 1530 :1986 and IS 1537 : 1976 complete including cost of cutting and making goods the walls and floors including carriage of materials within all leads, lifts and heights. 100mm nominal diameter
Chase in stone / brick mansonry walls for fixing sand cast iron / cast / spun iron pipes and fitting including making good the same with stone / brick work in cement mortar 1:3 (1cement : 3 sand) including carriage of materials within all leads, lifts and heights. For 75mm nominal diameter
Chase in stone / brick mansonry walls for fixing sand cast iron / cast / spun iron pipes and fitting including making good the same with stone / brick work in cement mortar 1:3 (1cement : 3 sand) including carriage of materials within all leads, lifts and heights. For 100mm nominal diameter
Providing and fixing 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of materials within all leads, lifts and heights.
Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design including carriage of materials within all leads, lifts and heights.
Providing and fixing 15 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including carriage of materials within all leads, lifts and heights.
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including carriage of materials within all leads, lifts and heights.
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including carriage of materials within all leads, lifts and heights.
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock Jaquar make Cat No. ARI-39037 or equivalent make of approved quality conforming to IS standards and weighing not less than 810 gms including carriage of materials within all leads, lifts and heights.
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.
Providing and fixing 32 mm dia C.P. brass chain and rubber plug complete for sink or wash basin including carriage of materials within all leads, lifts and heights.
Providing and fixing 40 mm dia C.P. brass chain and rubber plug complete for sink or wash basin including carriage of materials within all leads, lifts and heights.
Painting G.I pipes fittings with white paints over a coat of ready mixed priming, both of approved quality for new work including carriage of materials within all leads, lifts and heights. 15mm diameter pipe
Painting G.I pipes fittings with white paints over a coat of ready mixed priming, both of approved quality for new work including carriage of materials within all leads, lifts and heights. 20mm diameter pipe
Painting G.I pipes fittings with white paints over a coat of ready mixed priming, both of approved quality for new work including carriage of materials within all leads, lifts and heights. 25mm diameter pipe
Painting G.I pipes fittings with white paints over a coat of ready mixed priming, both of approved quality for new work including carriage of materials within all leads, lifts and heights. 32mm diameter pipe
Painting G.I pipes fittings with white paints over a coat of ready mixed priming, both of approved quality for new work including carriage of materials within all leads, lifts and heights. 40mm diameter pipe
Painting G.I pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality a ) 15mm diameter pipe including carriage of materials within all leads, lifts and heights.
Painting G.I pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality including carriage of materials within all leads, lifts and heights. 20mm diameter pipe
Painting G.I pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality including carriage of materials within all leads, lifts and heights. 25mm diameter pipe
Painting G.I pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality including carriage of materials within all leads, lifts and heights. 32mm diameter pipe
Painting G.I pipes and fittings with two coats of anticorrosive bitumastic paint of approved quality including carriage of materials within all leads, lifts and heights. 40mm diameter pipe
Providing and fixing C.P connection pipe with brass unions of approved make as per the direction of Engineer-In-Charge 32 to 45cms length including carriage of materials within all leads, lifts and heights. 15mm nominal bore
Providing and fixing C.P connection pipe with brass unions of approved make as per the direction of Engineer-In-Charge 32 to 45cms length including carriage of materials within all leads, lifts and heights. 20mm nominal bore
Providing and fixing brass full way valve with wheel including carriage of materials within all leads, lifts and heights.Zoloto/Leader/Unik 15mm nominal bore
Providing and fixing brass full way valve with wheel including carriage of materials within all leads, lifts and heights. Zoloto/Leader/Unik 20mm nominal bore
Providing and fixing brass full way valve with wheel including carriage of materials within all leads, lifts and heights. 25mm nominal bore
Providing & fixing white glazed vitreous china single trap syphonic pattern having back inlet ,supporting chair ,wall hung water closet with cistern complete with all internal fittings/accessories and CP brass flush bend (European type) water closet with seat and lid, with C.P. brass hinges and rubber buffers, adapter, rubber joints fixed to W.C., C.P. brass screwed washers including cutting and making good the walls and floors wherever required and HDPE wc pan connector including jointing with white cement complete in all respects. WC Jaquar model no-OPS WHT-15951 or equivelent series of Jal/Cera make Wall hung W.C. pan with white plastic seat & lid "Thermoset moulded (bakelite) IS 2548 Part I For supply, installation, testing & commissioning of sanitary fixtures as per above details including carriage of materials within all leads, lifts and heights.
Providing & fixing Health Faucet with 8mm dia, 1.2 M long PVC tube and wall hook of Jaquar make Cat No. ALD-573 or equivelent series of Jal/Cera make For supply, installation, testing & commissioning of sanitary fixtures as per above details including carriage of materials within all leads, lifts and heights.
Providing & fixing 15 mm dia C.P. brass angle valves with 450mm long C.P. Copper connecting pipe union nut C.P. cast brass wall flange. Jaquar model no-ALD-OPP-CHR-15053PM or equivelent series of Jal/Cera make For supply, installation, testing & commissioning of sanitary fixtures as per above details including carriage of materials within all leads, lifts and heights.
Providing & fixing 15 mm dia C.P. concealed stop cock with C.P. cast brass wall flange. Jaquar model no-ALD-CHR-083 or equivelent series of Jal/Cera make including cutting & making good the walls,floors,slabs. For supply, installation, testing & commissioning of sanitary fixtures as per above details including carriage of materials within all leads, lifts and heights.
Providing & fixing shower assemble complete with all accessories/fittings,exposed part of single level high flow(Jaquar model no ARI-CHR-37079K),concealed body (Jaquar model no ALD-CHR-079),flexible tube( JAQUAR MODEL NO sha-chr-548d8),HAND SHOWER( MODEL NO hsh-chr-1657),shower arm(model no SHA-CHR-475L100),overhead shower(model no OHS-CHR-1613) or equivelent series of Jal/Cera make with C.P. cast brass wall flange including carriage of materials within all leads, lifts and heights.. For supply, installation, testing & commissioning of sanitary fixtures as per above details
Providing & fixing 32 mm size C.P. bottle trap(Jaquar model no. ald-chr-769L) & CP waste(model no ALD-CHR-705) with C.P. cast brass wall flange. Jaquar model no-ALD-CHR-083 or equivelent series of Jal/Cera make For supply, installation, testing & commissioning of sanitary fixtures as per above details including carriage of materials within all leads, lifts and heights.
Providing & fixing white table top glazed vitreous china wash basin with R.S. or C.I. brackets painted white complete including cutting and making good the walls wherever required Wash basin of size: 700x435x135 mm.Jaquar model no. ARS-WHT-39903 or equivelent series of Jal/Cera make. For supply, installation, testing & commissioning of sanitary fixtures as per above details including carriage of materials within all leads, lifts and heights.
Providing & fixing 15mm C.P. brass pressmatic wall mounted basin tap( auto closing) with wall flange(Jaquar model no. PRS-CHR-061) or equivelent series of Jal/Cera make including cutting & making good the walls,floors,slabs For supply, installation, testing & commissioning of sanitary fixtures including carriage of materials within all leads, lifts and heights.
Providing & fixing stainless steel towel rack including cutting and making good the walls. Model no-AKP-CHR-35781PFS or equivelent series of Jal/Cera make For supply, installation, testing & commissioning of sanitary fixtures including carriage of materials within all leads, lifts and heights.
Providing and fixing CP soap trey of Jaquar make Cat No. AQN7721 or equivelent series of Jal/Cera make incluidng carriage of materials within all leads lifts heights.
Providing and fixing Robe hook of Jaquar make Cat No. ACH1191N or equivelent series of Jal/Cera make incluidng carriage of materials within all leads lifts heights.
Providing and fixing Towel Ring of Jaquar make Cat No. AQN7721 or equivelent series of Jal/Cera make incluidng carriage of materials within all leads lifts heights.
Providing and fixing CP gretting of Chilly/Sagar or equivelent series incluidng carriage of materials within all leads lifts heights.
Providing & fixing toilet paper holder including cutting and making good the walls. Model no-AKP-CHR-35753PS or equivelent series of Jal/Cera make For supply, installation, testing & commissioning of sanitary fixtures including carriage of materials within all leads, lifts and heights.
Providing & fixing 450mm long grab bar with brackets fixed to wooden cleats with C.P. brass screws.Model no-AHS-CHR-1503 or equivelent series of Jal/Cera make including cutting & making good the walls,floors,slabs. For supply, installation, testing & commissioning of sanitary fixtures including carriage of materials within all leads, lifts and heights.
Providing & fixing C.P. brass double coat hooks fixed on toilet door /wall with C.P. brass screws.Model no-AKP-CHR-35761P or equivelent series of Jal/Cera make including cutting & making good the walls,floors,slabs. For supply, installation, testing & commissioning of sanitary fixtures including carriage of materials within all leads, lifts and heights.
Providing & fixing concealed cistern for water closet (model no. JCS-WHT-2400) complete with all internal fittings/accessories & exposed plate(model no JCP-CHR-392415) or equivelent series of Jal/Cera make including cutting & making good the walls,floors,slabs. For supply, installation, testing & commissioning of sanitary fixtures including carriage of materials within all leads, lifts and heights.
Providing & fixing 15 mm dia C.P. brass bib cock with Hose union of Jaquar make Cat No. ARI-39037 or equivelent series of Jal/Cera make of approved quality. including cutting & making good the walls,floors,slabs. For supply, installation, testing & commissioning of sanitary including carriage of materials within all leads, lifts and heights.
Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall flange Jaquar make Cat No. ARI-39041 or equivelent series of Jal/Cera make of approved quality. For supply, installation, testing & commissioning of sanitary fixtures including carriage of materials within all leads, lifts and heights.
Providing and fixing Saunas of Jaquar make Kaya series Cat No. JSA-NAW-MD-3150 of size 1500x1100x2100 mm as per manufacturar specification and direction of Engineer in charge including carriage of materials within all leads, lifts and heights.
Providing & fixing bath tub (size 1500x750x420mm deep) Fonte of Jaquar make Cat No. JBT-WHT-FONT-150X (built in bath tube) or equivelent series of Jal/Cera make complete with CP trap with drain & overflow arrangement, front & side panels,bath tub filler with cocks & spout, piping & all associated civil works to make the unit operational. Rectangular type-For installation, testing & commissioning of sanitary fixtures including carriage of materials within all leads, lifts and heights.
Providing and fixing sink mixer wall mounted Cera make Cat No. F-1017501 165mm (6.5") or equivelent series of Jaquar/Hindwere make complete long swivel spout connecting legs and wall flange as per the direction of Engineer-In-Charge including carriage of materials within all leads and lifts.
Providing and fixing single lever sink mixer Cera make Cat No. F1017551 with 235mm (9") or equivelent series of Jaquar/Hindwere make complete long swivel spout and long braided connection pipe 450 mm as per the direction of Engineer-In-Charge including carriage of materials within all leads and lifts.
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge including carriage of materials within all leads, lifts and heights. Supreme/Prince/Astral or equivelent of approved make as per the direction of Engineer-In-Charge Internal Work - Exposed on Wall 15 mm nominal outer dia pipes.
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge including carriage of materials within all leads, lifts and heights. Supreme/Prince/Astral or equivelent of approved make as per the direction of Engineer-In-Charge Internal Work - Exposed on Wall 20 mm nominal outer dia pipes.
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge including carriage of materials within all leads, lifts and heights. Supreme/Prince/Astral or equivelent of approved make as per the direction of Engineer-In-Charge Internal Work - Exposed on Wall 25 mm nominal outer dia pipes.
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge including carriage of materials within all leads, lifts and heights. Supreme/Prince/Astral or equivelent of approved make as per the direction of Engineer-In-Charge Internal Work - Exposed on Wall 32 mm nominal outer dia pipes.
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge including carriage of materials within all leads, lifts and heights. Supreme/Prince/Astral or equivelent of approved make as per the direction of Engineer-In-Charge Internal Work - Exposed on Wall 40 mm nominal outer dia pipes.
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge including carriage of materials within all leads, lifts and heights. Internal Work - Exposed on Wall 50 mm nominal outer dia pipes.
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge. Concealed work oncluding cutting chases and making good the walls etc. including carriage of materials within all leads, lifts and heights. 15 mm nominal outer dia pipes.
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge. Concealed work oncluding cutting chases and making good the walls etc. including carriage of materials within all leads, lifts and heights. 20 mm nominal outer dia pipes.
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge. Concealed work oncluding cutting chases and making good the walls etc. including carriage of materials within all leads, lifts and heights. 25 mm nominal outer dia pipes.
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge. Concealed work oncluding cutting chases and making good the walls etc. including carriage of materials within all leads, lifts and heights. 32 mmnominal outer dia pipes.
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of materials within all leads, lifts and heights.Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge. Double door-16 way
Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of materials within all leads, lifts and heights. Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge. Double door-12 way (8+36),horizontal type
Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 8 module incomer, 2 module sub-incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, dinbar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of materials within all leads, lifts and heights.Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge. Double door-2+12 way (8+6+36),horizontal type
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required including carriage of materials within all leads, lifts and heights. Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge. a) Single pole. Cat-A.
b) Double pole. Cat-A. Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge.
c) Triple pole. Cat-A. 32A Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge.
Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required Triple pole & Neutral including carriage of materials within all leads, lifts and heights. Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge. Cat-A.
Supplying and fixing single pole, blanking plate in the existing MCB DB complete as required including carriage of materials within all leads, lifts and heights.Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge.
Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required including carriage of materials within all leads, lifts and heights. Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge. a) 40 Amps.Cat-A.
b) 63 Amps. Cat-A.
Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required including carriage of materials within all leads, lifts and heights.Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge.
Supplying and fixing 30 Amps, 415 volts, TPN industrial socket outlet, 4-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 30 Amp TPN-MCB, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required including carriage of materials within all leads, lifts and heights.Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge.
Design, manufacture, supply, installation, testing and commissioning of following LT switchgear panels suitable for 415 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor/wall mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalized design fabricated out of 14 SWG sheet steel, complete with aluminium bus bars, separate earth bus bar to be provided through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a modular multitier arrangement with adequate size cable alley and bus bar chamber, painting, earthing, numbering, danger plate etc as required as per specifications and drawings including carriage of materials within all leads, lifts and heights. HEATING PANEL One (1) No. 400A 4P MCCB (36 KA). Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge. Metering & Indication :One (1) no. digital VIF meter (accuracy class 1) with 1 Set (3 Nos) of 400/5A ratio, 15VA, CL 1 resin cast CTs & control fuses. One (1) set of three (3) nos. phase indicating LED lamps with fuses. Busbars: Electrolytic high conductivity Aluminium three pole and neutral busbars rated at 500 amps having a maximum current density of 1.0 amp per sq. mm insulated with heat shrinkable PVC sleeves. One (1) set of Class B/Class II (according to IEC 61643) Surge Protection device. Outgoing:Eleven (11) Nos. 125 A, 36 KA, 4P MCCBs with o/c, s/c protection Make:-Legrand/ Havell's/L&T or equvalent make as approved by the Engineer-in-charge. Make:-Legrand/Havell's/L&T or equvalent make as approved by the Engineer-in-charge. All MCCBs shall be (Ics=100% Icu) The panel shall be IP 52 protected. Panel shall be 3b form of segragation designed. The panel dimensions shall be 2 (L) x 1.75 (H) x 0.45 (D) mtr minimum. All MCCBs shall be provided with spreader terminals, phase barriers and rotary handle operating mechanism and MCB's should be Legrand/ Havell's/L&T make.
LIGHT PANEL:- Incoming :One (1) No. 250A 4P on load type manual change over switch., One (1) No. 250A 4P MCCB (36 KA).Metering & Indication :One (1) no. digital VIF meter (accuracy class 1) with 1 Set (3 Nos) of 250/5A ratio, 15VA, CL 1 resin cast CTs & control fuses. One (1) set of three (3) nos. phase indicating LED lamps with fuses. Busbars: Electrolytic high conductivity Aluminium three pole and neutral busbars rated at 400 amps having a maximum current density of 1.0 amp per sq. mm insulated with heat shrinkable PVC sleeves. One (1) set of Class B/Class II (according to IEC 61643) Surge Protection device. Outgoing: Nine (9) Nos. 125 A, 36 KA, 4P MCCBs with o/c, s/c protection Note :- The panel shall be IP 52 protected., Panel shall be 3b form of segragation designed. The panel dimensions shall be 2.4 (L) x 1.75 (H) x 0.45 (D) mtr minimum. All MCCBs shall be provided with spreader terminals, phase barriers and rotary handle operating mechanism. All MCCBs shall be (Ics=100% Icu) and MCB's should be Legrand/ Havell's/L&T or equvalent make as approved by the Engineer-In-Charge.
SUB DISTRIBUTION BOARDS -SDB (wall mounting) Incoming :One (1) No. 125A 4P MCCB (36 KA)., Busbars: Electrolytic high conductivity Aluminium three pole and neutral busbars rated at 150 amps having a maximum current density of 1.0 amp per sq. mm insulated with heat shrinkable PVC sleeves. Note:-The panel shall be IP 52 protected., Panel shall be 3a form of segragation designed. The panel dimensions shall be 0.75 (L) x 0.45 (H) x 0.20 (D) mtr minimum. MCCB shall be provided with spreader terminals, phase barriers and rotary handle operating mechanism. MCCB shall be (Ics=100% Icu) and MCB's should be Legrand/ Havell's/L&T make or equvalent make as approved by the Engineer-In-Charge.
Supplying & fixing of LED downlight. HAVELLS SPARKLE PRO ADJUSTABLE SPARKLEPROADJDLR12W840MOD40D with LED Driver HAVELLS LED DRIVER12WS and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of LED downlight. HAVELLS ENDURA DL Neo 15 W ENDURANEO1-10VDLR15WLED840MOD and making connections, testing etc.including carriage of materials within all leads, lifts and heights.Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of LED downlight. HAVELLS SPARKLE PRO FIX SPARKLEPROFIXDLR 12W840MOD with LED Driver Havells LEDDRIVER12WS and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge.
Supplying & fixing of Bed Side Wall Lamp - BODY SS FINISH WITH 1 WATT READING LAMP + E27 HOLDER + SHADE. and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of Wall Light Double Arm GOLD FINISH WITH GLASS SHADES and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of 6 LIGHTS CHANDELIER - MATERAIL MS, FINISH ANT COPPER PAINT, DIA: 520 mm and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of GLASS PENDANT - SMOKE/ CLEAR FINISH GLASS PENDANT DIA 5.5" mm and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of CHANDILLER - CRYSTAL CHANDILLER WITH 1500 DIA and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of LED STRIP LIGHT FOR BACKLIT PANEL. HAVELLS - FLEXISTRIP5MTRIP2024WLED830S and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of FOOT LIGHT- Legrand Skirting light with white LED - 3 module 6755 97 and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of PICTURE / MIRROR LIGHT - HAVELLS ENDURALINEARNEOBS 10W LED840SPCWH and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of LED STRIP LIGHT FOR COVE / BED HEAD/Wall Washer and making connections, testing etc. including carriage of materials within all leads, lifts and heights.Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of LED DRIVER FOR STRIP LIGHT. HAVELLS FLEXISTRIPDRIVER24WS and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of LED DRIVER FOR STRIP LIGHT. HAVELLS FLEXISTRIPDRIVER72WS and making connections, testing etc. including carriage of materials within all leads, lifts and heights.Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of CUPBOARD LIGHT-HAVELLS LUMILINEBS9WLED840SPCWH and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Providing and fixing aesthetically designed robust LED Wellglass equipped with specially deisgned heat sink and reliable intergrated energy efficient electronic driver to meet the different requirement with efficiency of 5700K 40 W, fixture complete with all accessories Panasonic make or equivalent make, connection, testing and commissioning etc as required.
Providing and fixing decorative utra slim new E-light LED tube fixture high lumen batten with efficiency of 100 lumens 20 W, extruded box fixture complete with all accessories including one No. tube rod Havell's make cat No. Havell's 20 W Cool day light Batten (LHEXACP7UN1W020) connection or equivalent make, testing and commissioining etc as required.
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required including carriage of materials within all leads, lifts and heights. Make:- Havell's/Usha/Crompton or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of Stone Lamps and making connections, testing etc. including carriage of materials within all leads, lifts and heights.Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of Wall Light for Exterior Lighting - Havells HEXA 10W - IP66 HEXAFT10WLED857SSYMBOPC and making connections, testing etc. including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Philipsor equivalent make as approved by the Engineer-in-charge
Supplying & fixing of Exterior Gate Light and making connections, testing etc. including carriage of materials within all leads, lifts and heights.Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of Wall Washer Light and making connections, testing etc. including carriage of materials within all leads, lifts and heights.Make:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Supplying & fixing of Uplighters and making connections, testing etc. including carriage of materials within all leads, lifts and heightsMake:- Havell's/Anchor Panasonic/Philips or equivalent make as approved by the Engineer-in-charge
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required including carriage of materials within all leads, lifts and heights. The Wire should be Havell's/KEI/Finolix make, Switch, Metal Box & modular plate shall be Havell's/Anchor Panasonic/Legrand/L&T or equivalent make and PVC pipe should be Diplast/Polyplast/Setia make as approved by the Engineer-In-Charge. Group A
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required including carriage of materials within all leads, lifts and heights. The Wire should be Havell's/KEI/Finolix make, Switch, Metal Box & modular plate shall be Havell's/Anchor Panasonic/Legrand/L&T or equivalent make and PVC pipe should be Diplast/Polyplast/Setiaor equivalent make. Group C
Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required including carriage of materials within all leads, lifts and heights. The Wire should be Havell's/KEI/Finolix make, Switch, Metal Box & modular plate shall be Havell's/Anchor Panasonic/Legrand/L&T make and PVC pipe should be Diplast/Polyplast/Setia make as approved by the Engineer-In-Charge. Group B
Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix or equivalent make as approved by the Engineer-In-Charge..
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required including carriage of materials within all leads, lifts and heights. Make:- Havell's/Anchor Panasonic/Legrand/L&T or equivalent make as approved by the Engineer-In-Charge.
Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix or equivalent make as approved by the Engineer-In-Charge.
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required including carriage of materials within all leads, lifts and heights.Make:- Havell's/Anchor Panasonic/Legrand/L&T or equivalent make as approved by the Engineer-In-Charge.
Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix 4x1.5 Sq. mm. or equivalent make as approved by the Engineer-In-Charge.
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix 2 x 6.0 Sq. mm. or equivalent make as approved by the Engineer-In-Charge.
Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix or equivalent make as approved by the Engineer-In-Charge.
Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix or equivalent make as approved by the Engineer-In-Charge.
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required including carriage of materials within all leads, lifts and heights. Make:- Anchor/Havell's/Greatwhite/Cona or equivalent make as approved by the Engineer-In-Charge.
Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required including carriage of materials within all leads, lifts and heights. a) (Geyser shall be horizontal type) 35 Litre capacity water heater (Cat-A) Make:-Spherehot/ Jaquar/Havell's
b) 50 Litre capacity water heater (Cat-A) Make:-Spherehot/ Jaguar/Havell's or equivalent make as approved by the Engineer-In-Charge.
Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix 2 Pair or equivalent make as approved by the Engineer-In-Charge.
Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/KEI/Finolix or equivalent make as approved by the Engineer-In-Charge.
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required including carriage of materials within all leads, lifts and heights. Make:-Diplast/Polyplast/Setia 20 mm. dia (for TV/Tel wires) or equivalent make as approved by the Engineer-In-Charge.
Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/L&T/Legrand a) Telephone socket outlet, Modular or equivalent make as approved by the Engineer-In-Charge.
b) TV. Socket outlet, modular Make:-Havell's/L&T/Legrand or equivalent make as approved by the Engineer-In-Charge.
Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required including carriage of materials within all leads, lifts and heights. Make:-Havell's/ L&T/ Legrand 2 modules (78mmx78mmx50mm) (For Telephone & TV Outlet) or equivalent make as approved by the Engineer-In-Charge.
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required including carriage of materials within all leads, lifts and heights. 1 run of cable (for Data, WIFI) Make:-Havell's/KEI/Finolix or equivalent make as approved by the Engineer-In-Charge.
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required including carriage of materials within all leads, lifts and heights. a) 20 mm. dia (for 4x1.5Sqmm Wire) Make:-Diplast/Polyplast/Setia or equivalent make as approved by the Engineer-In-Charge.
b) 25 mm. dia (for Data, WIFI) Make:-Diplast/Polyplast/Setia or equivalent make as approved by the Engineer-In-Charge.
Supply, Installation, Testing & Commissioning of Hotel key fob switch with key fob. Legrand Mylinc key card switch 675560 & 673038 including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's/l&T or equivalent make as approved by the Engineer-In-Charge.
Supply, Installation, Testing & Commissioning of USB Charging Port. Legrand Mylinc 675971 as per IS 13252 Part-1/ IEC 60950-1 including carriage of materials within all leads, lifts and heights. Make:- Legrand/Havell's/l&T or equivalent make as approved by the Engineer-In-Charge.
Providing, laying and fixing of one No. aluminium conductor, XLPE insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size including carriage of materials within all leads, lifts and heights. Make:- Havell's/KEI/Finolex or equivalent make as approved by the Engineer-In-Charge. a) Armoured cable 35 sq. mm (3.5 core)
b) Armoured cable 50 sq. mm (3.5 core) Make:- Havell's/KEI/Finolex or equivalent make as approved by the Engineer-In-Charge.
c) Armoured cable 70 sq. mm (3.5 core) Make:- Havell's/KEI/Finolex or equivalent make as approved by the Engineer-In-Charge.
d) Armoured cable 95 sq. mm (3.5 core) Make:- Havell's/KEI/Finolex or equivalent make as approved by the Engineer-In-Charge.
e) Armoured cable 400 sq. mm (3.5 core) Make:- Havell's/KEI/Finolex or equivalent make as approved by the Engineer-In-Charge.
Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/3529 i/c fittings like elbows, tee, flanges tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes. complete as required including carriage of materials within all leads, lifts and heights. Make:- Tata 150mm dia
Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe Tata make conforming to IS 1239/3529 i/c including welding, fitting like elbows,tee, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required including carriage of materials within all leads, lifts and heights. a) 25 mm dia
b) 32 mm dia Tata Make
c) 40 mm dia Tata Make
d) 50 mm dia Tata Make
e) 65 mm dia Tata Make
f) 80 mm dia Tata Make
g) 100 mm dia Tata Make
h) 150 mm dia Tata Make
i) 200 mm dia ( wall thickness 6.3mm) Tata Make
j) 250 mm dia ( wall thickness 6.3mm) Tata Make
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 ( Type-A) with blank Gunmetal/Stainless steel Cap and chain as required: Single headed Gunmetal including carriage of materials within all leads, lifts and heights. Make:- Newage/Kartar/Omax or equivalent as approved by the Engineer-in-charge
Supplying and fixing single headed external yard hydrant valve with 1 nos 63mm dia instantaneous FM Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 ( Type-A) with blank Gunmetal/Stainless steel Cap and chain as required including carriage of materials within all leads, lifts and heights.Single headed Gunmetal Make:- Newage/Kartar/Omax or equivalent as approved by the Engineer-in-charge
Supply, fixing, testing and commission of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required including carriage of materials within all leads, lifts and heights. Make:-Sant/Zoloto/Kirloskar or equivalent make as approved by the Engineer-In-Charge. a) 40 mm dia
b) 50 mm dia
c) 65 mm dia
d) 80 mm dia
e)100 mm dia
f) 150 mm dia
g) 200 mm dia
h) 250 mm dia
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/sq cm complete as required including carriage of materials within all leads, lifts and heights. Make:-Newage/Omax or equivalent as approved by the Engineer-in-charge.
Providing installation, testing and commissioning of non return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nut, washers etc.as required including carriage of materials within all leads, lifts and heights. Make:-Zoloto/Sant/Kartar or equivalent make as approved by the Engineer-In-Charge. 65 mm dia
b) 150 mm dia
Providing, installation, testingand commissioning of stainless steel Y-strainer fabricated out of 1.6mm thick stainless steel, Grade 304, sheet with 3mm dia hole with stainless steel flange including carriage of materials within all leads, lifts and heights. Make:-Zoloto/Sant/Kartar or equivalent make as approved by the Engineer-In-Charge. a) 80 mm dia
b) 150 mm dia
Supplying and fixing 63mm dia, 15 m RRL hose pipe with 63mm dia male and female coupling duly bound with GI wire, riverts etc. conforming to IS 636 (type-A) as required Gunmetal including carriage of materials within all leads, lifts and heights. Make:- Newage/Omax or equivalent as approved by the Engineer-in-charge.
Supplying and fixing first-aid hose reel with MS construction spray painting in post office red, conforming to IS 884 complete with following as required. 20mm nominal internal dia water hose thermoplastic (textile reinforced) type- 2 as per IS: 12585 20mm nominal internal gun metal globe valve and nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25mm dia stop gun metal valve and M.S pipe and socket including carriage of materials within all leads, lifts and heights.Make:- Newage/Omax or equivalent as approved by the Engineer-in-charge. 40m
Supplying and fixing 63mm dia gun metal short branch pipe with 20mm nominal internal diameter size nozzel conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required including carriage of materials within all leads, lifts and heights. Gun metal Make:- Newage/Omax or equivalent make as approved by the Engineer-in-charge.
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required including carriage of materials within all leads, lifts and heights. Make:- Newage/Omax/Mec or equivalent make as approved by the Engineer-in-charge. a) 2 way-100mm dia M.S pipe
b) 4 way-150mm dia M.S pipe
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air relase valve on top and flange connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required including carriage of materials within all leads, lifts and heights.
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories including carriage of materials within all leads, lifts and heights. Make:- Tyco/Newage or equivalent make as approved by the Engineer-In-Charge. a) Pendent Sprinkler
b) Upright Sprinkler
c) Horizontal side wall Sprinkler
d) Concealed Sprinkler
Providing and fixing pressure switch in MS pipe line including connection etc. as required including carriage of materials within all leads, lifts and heights. Make:-Denfoss or equivalent make as approved by the Engineer-in-charge.
Providing and fixing flow switch in following size MS pipe including connection etc. as required including carriage of materials within all leads, lifts and heights. Make:- Honeywell/System Sensor/ Agni Suraksha or equivalent make as approved by the Engineer-In-Charge. a)100mm dia
b) 150mm dia
Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hyraulically driven mechanical gong bell sound continuous alarm when the wet riser/sprinkler system activates, pressure gauge, emergency release, strainer, pressur switch, cock valve complete with drain valve and bypass, test control box, ball valve, MS pipe of required size, flange, orifice plate,gasket etc of following size as required including carriage of materials within all leads, lifts and heights. Make:-Newage/H Guru/Leader or equivalent make as approved by the Engineer-In-Charge. a)150mm dia
Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (inlet) 25mm NPT male thread to sprinkler head (outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets,center bracket, stockbar of following size complete as required including carriage of materials within all leads, lifts and heights. Make:- Omax/Safex or equivalent make as approved by the Engineer-In-Charge. a) 1000mm
Providing, installation, teasting and commissioning of adjustable rosette plate for 15mm dia in white finish UL listed or FM approved complete as required including carriage of materials within all leads, lifts and heights. Make:- Leader/Kartar or equivalent make as approved by the Engineer-In-Charge.
Providing & placing on terrace (at all floor levels) polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet 7 overflow pipes but without fittings and the base support for tank including carriage of materials within all leads, lifts and heights.Make:- Sintex as approved ny Engineer-In-Charge.
Supply, installation, testing and commissioning of Diesel Engine driven fire pump suitable for automatic operation consisting of the following, complete in all respects, as required:( Diesel Driven Pump) Horizontal type,multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 Suitable HP, 1500 RPM water cooled with radiato, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts electric starting equipment, deisel tank, exhaust pipe extendend upto 10m outside pump house duly insulated with 50mm thick glass wool with 1.0 mm thick aluminimum sheet cladding, residential silencer, instruments and protections as per standard specification, stop solenoid for auto stop in the event of fault with audio indication, painted with post office red coclour etc. as required M.S fabricated, common based plated, coupling, coupling guard, foundation bolts etc as required Suitable cement concrete foundation duly plastered and with anti vibration pads. 2280 lpm at 70 m Head including carriage of materials within all leads, lifts and heights.
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required:(Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS: 1520 Suitable HP squirell cage induction motor TEFC type suitabe for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure horizontal foot mountaed type Class-'F' insulation,conforming to IS:325. M.S fabricated common based plated , coupling, coupling guard, foundation bolts etc.as required Suitable cement concrete foundation duly plastered and with anti vibration pads including carriage of materials within all leads, lifts and heights. Make:-Kirloskar/Crompton Greaves/Matherplatt or equivalent make as approved by the Engineer-In-Charge. 180 lpm at 70m Head
Providing, fixing, testing and commissioning of pressure vessel (minimum 450 mm dia & 2000 mm height) for pressurization of hydrant system complete with pressure switches, pressure gauge, valves at outlet / drain to operate as per operating sequences including 80 mm dia drain valve, air release valve with stop cock on the top Duly painted from inside and outside complete as required including carriage of materials within all leads, lifts and heights.
Providing & fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 15Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required. a) 65 mm dia
b) 80 mm dia
c) 100 mm dia
d) 150 mm dia
e) 200 mm dia
Providing and fixing standard firemans axe with heavy rubber handle including carriage of materials within all leads, lifts and heights.
Providing and fixing weather proof cabinet of size not less than 0.6 x 0.6 x 0.45 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in red colour suitable to accomodate, external yard hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be mounted on boundary wall complete as required including carriage of materials within all leads, lifts and heights. Make:-Newage/Omax/Ataasi or equivalent make as approved by the Engineer-In-Charge.
Providing and fixing 4 mm thick glass door of size 2.1 m x 0.9 m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet. Suitably marked on the outside with the letters "FIRE HOSE" including locking arrangement. All aluminium work to be in Red P.O. colour including carriage of materials within all leads, lifts and heights.
Providing & fixing cast iron foot valve complete with flange including carriage of materials within all leads, lifts and heights. Make:- Zoloto/Sant/Leader or equivalent make as approved by the Engineer-In-Charge. 150mm dia.
Providing and fixing inspectors test assembly complete with test valve, sight glass sectional drain valve, union with corrosion resistant orifice all complete strictly as per drawing including carriage of materials within all leads, lifts and heights. a) 50 mm dia .
Providing and fixing electrically operated flow indicating switches with threaded connection for indicating water flow in sprinkler branch line on each floor with necessary local junction box installed in an accessible place close to flow switch with 2 core 1.5 sqmm FRLS copper cable from flow switch to junction box including all materials for fixing the junction box/cables including carriage of materials within all leads, lifts and heights. Make:- Honeywell/System Sensor or equivalent make as approved by the Engineer-In-Charge.
HANS CONSTRUCTIONS
PYRAMID BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid