Internal, External, Ceiling Painting, Chajja Repairs along with Allied Civil Works in Hydraulic Lab, Instrument Lab, Landing Gear and Radio Lab in Overhaul Division, HAL BC.

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Internal, External, Ceiling Painting, Chajja Repairs along with Allied Civil Works in Hydraulic Lab, Instrument Lab, Landing Gear and Radio Lab in Overhaul Division, HAL [BC]. CONTRACT NO. HAL/FMD/R-81/24-25

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with detailed technical specification and tender drawings if any.

DISMANTLING AND DEMOLITION

1 Dismantling tile work in floors and roofs (for thicknes of tiles 10mm to 25mm) laid in cement mortar including stacking material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge. 135.00 Sq m 67.43 Rupees Sixty Seven and Forty Three Paise Only 9103.05

2 Demolishing cement concrete of nominal 1:3:6 or richer mix manually/by mechanical means including disposal of material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge. 1.00 Cu m 2236.42 Rupees Two Thousand Two Hundred Thirty Six and Forty Two Paise Only 2236.42

3 Dismantling of old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead, etc., all complete as directed by Engineer-in-Charge. 215.00 Sq m 50.21 Rupees Fifty and Twenty One Paise Only 10795.15

4 Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, etc., all complete as directed by Engineer-in-Charge. 40.00 Sq m 51.77 Rupees Fifty One and Seventy Seven Paise Only 2070.80

EARTH WORK EXCAVATION

5 Earthwork in excavation in all kinds of soil by mechnical means (hydralic excavator) /manual means over areas (exceeding 30cm depth, 1.50m width as well as 10Sq qm on plan) inlcuding getting out and disposal of excavated earth lead up to 50m and for all lift, etc., all complete as directed by Engineer-in-Charge. 3.00 Cu m 163.07 Rupees One Hundred Sixty Three and Seven Paise Only 489.21

6 Filling available earth (excluding rock) in trenches, plinth, sides of foundation, etc., in layers not exceeding 20cm, consolidated each deposited layer by ramming and watering lead up to 50m and for all lift, etc., all complete as directed by Engineer-in-Charge. 1.00 Cu m 180.07 Rupees One Hundred Eighty and Seven Paise Only 180.07

7 Half brick masonry in Cement mortar 1:3 (1 cement : 3 coarse sand) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level, etc., all complete as directed by Engineer-in-Charge. 3.00 Sq m 1057.00 Rupees One Thousand Fifty Seven Only 3171.00

8 Providing and laying plaster mix 1: 6 ( 1 cement : 6 coarse sand) of 15mm thick plaster on the rough side of single or half brick wall, etc., all complete as directed by Engineer-in-Charge. 215.00 Sq m 351.87 Rupees Three Hundred Fifty One and Eighty Seven Paise Only 75652.05

CARRIAGE AND DISPOSAL

9 Disposal of moorum / building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead up to 10km for all lifts, etc., all complete as directed by Engineer-in-Charge. Note: Item to be applicable in urban areas having direction for restricted hours for movement/plying of laod carrying motor vehicke of 3.50Cu m or more. 20.00 Cu m 453.94 Rupees Four Hundred Fifty Three and Ninety Four Paise Only 9078.80

10 Providing and laying in position cement concrete of specified grade(1:4:8 -1 cement :4 manufactured sand derived from Recycled concrete aggregates:8 graded stone aggregates 40mm nominal size recycled aggregates) excluding the cost of centering and shuttering - All work up to plinth level, etc., all complete as directed by Engineer-in-Charge. 1.00 Cu m 4782.21 Rupees Four Thousand Seven Hundred Eighty Two and Twenty One Paise Only 4782.21

11 Reinforced cement concrete work in beams, suspended floors, roofs having slope upt 15 degree landing, balaconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral cases above plinth level up to floor five level excluding the cost of cenetring, shuttering, finishing and reinforment with 1:1.5:3, etc., all complete as directed by Engineer-in-Charge. 2.00 Cu m 10570.43 Rupees Ten Thousand Five Hundred Seventy and Forty Three Paise Only 21140.86

12 Providing and Fixing hard drawn steel wire fabric of size [75 x 25]mm mesh or other suitable size wire mesh to be fixed and firmly anchored to the concrete surface by means of L shaped Mild steel shear key welded with existing reinforcement including the cost of materila, labour, tool & plants, etc., all complete as directed by Engineer-in-Charge. 35.00 Sq m 829.20 Rupees Eight Hundred Twenty Nine and Twenty Paise Only 29022.00

CHAJJA REPAIR WORKS

13 Steel reinforcement (Thermo-Mechanically Treated bars of grade Fe-500D or more) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level, etc., all complete as directed by Engineer-in-Charge. 125.00 Kgs 99.08 Rupees Ninety Nine and Eight Paise Only 12385.00

14 Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minumum depth of 100mm up to 200mm and 12mm dia in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades / balconoes including fixing the steel bars in position using epoxy resin anchor grout of apporved make but excluding the cost of reinforcment, etc., all complete as directed by Engineer-in-Charge. 200.00 One Hole 129.72 Rupees One Hundred Twenty Nine and Seventy Two Paise Only 25944.00

15 Providing mixing and applying bonding coat of approved adhesive on chipper portion of RCC as per specification and direction of EIC in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.20kgs cement per Sq m of surface area mixed with specified proportion of approoved polymer, etc., all complete as directed by Engineer-in-Charge. 25.00 Sq m 129.72 Rupees One Hundred Twenty Nine and Seventy Two Paise Only 3243.00

STRUCTURAL STEEL WORKS

16 Steel work welded inbuilt up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, etc., all complete as directed by Engineer-in-Charge. 1150.00 Kgs 158.57 Rupees One Hundred Fifty Eight and Fifty Seven Paise Only 182355.50

17 Centering and Shuttering including strutting, propping, etc., and removal of form work for Weather shed, Chajjas, corbels, etc., including edges, etc., all complete as directed by Engineer-in-Charge. 30.00 Sq m 873.80 Rupees Eight Hundred Seventy Three and Eighty Paise Only 26214.00

PAINTING - EMULSION, EXTERIOR, ALUMINIUM

18 Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, etc., all complete as directed by Engineer-in-Charge. 10250.00 Sq m 18.14 Rupees Eighteen and Fourteen Paise Only 185935.00

19 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre, etc., all complete as directed by Engineer-in-Charge. 10250.00 Sq m 67.94 Rupees Sixty Seven and Ninety Four Paise Only 696385.00

20 With ready mixed Red oxide zinc chromite primer of approved brand and manufacturer on steel galvanized iron/steel works, etc., all complete as directed by Engineer-in-Charge. 575.00 Sq m 61.92 Rupees Sixty One and Ninety Two Paise Only 35604.00

21 Providing and applying white cement based wall care putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, etc., all complete as directed by Engineer-in-Charge. 100.00 Sq m 143.37 Rupees One Hundred Forty Three and Thirty Seven Paise Only 14337.00

22 Wall painting Two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, etc., all complete as directed by Engineer-in-Charge. 4200.00 Sq m 131.19 Rupees One Hundred Thirty One and Nineteen Paise Only 550998.00

23 Painting 2 or more coats with synthetic enamel paint of approved brand and manufacture to give an even shade on old work, etc., all complete as directed by Engineer-in-Charge. 250.00 Sq m 94.45 Rupees Ninety Four and Forty Five Paise Only 23612.50

24 French spirit polishing -One or more coats on old work, etc., all complete as directed by Engineer-in-Charge. 145.00 Sq m 206.53 Rupees Two Hundred Six and Fifty Three Paise Only 29946.85

25 Finishing walls with Premium Acrylic Smooth exterior paint (Apex Ultima or equivalant) (Two or more coats applied @ 1.43 ltr/10 Sq m) over existing cement paint surface) with Silicone additives of required shade(brand :Apex Ultima or any equivalent ): Old work, etc., all complete as directed by Engineer-in-Charge. 4250.00 Sq m 120.63 Rupees One Hundred Twenty and Sixty Three Paise Only 512677.50

26 Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work, etc., all complete as directed by Engineer-in-Charge. 325.00 Sq m 88.20 Rupees Eighty Eight and Twenty Paise Only 28665.00

27 Distempering one or more coats with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour, etc., all complete as directed by Engineer-in-Charge. 1800.00 Sq m 57.60 Rupees Fifty Seven and Sixty Paise Only 103680.00

VITRIFIED TILE FLOORING

28 Providing and laying Vitrified tiles in floor of [600 x 600]mm size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish, etc., all complete as directed by Engineer-in-Charge. 110.00 Sq m 1335.51 Rupees One Thousand Three Hundred Thirty Five and Fifty One Paise Only 146906.10

29 Hacking of CC flooring including cleaning for surfcae, etc., all complete as directed by Engineer-in-Charge. 110.00 Sq m 3.17 Rupees Three and Seventeen Paise Only 348.70

GRANITE FLOORING

30 Providing and Laying flamed finish Granite Stone flooring in required design and patters in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1cement :4 Coarse sand) laid and jointed with cement slurry and ponting with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing, etc., all complete as directed by Engineer-in-Charge. 20.00 Sq m 2927.71 Rupees Two Thousand Nine Hundred Twenty Seven and Seventy One Paise Only 58554.20

31 Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, etc., complete at all levels. Granite stone slab colour black, Cherry/Ruby red: & Area of slab over 0.50Sq m, etc., all complete as directed by Engineer-in-Charge. 3.00 Sq m 4718.87 Rupees Four Thousand Seven Hundred Eighteen and Eighty Seven Paise Only 14156.61

32 Mirror polishing on marble/granite/stone work wherever required to give high gloss finish, etc., all complete as directed by Engineer-in-Charge. 400.00 Sq m 465.52 Rupees Four Hundred Sixty Five and Fifty Two Paise Only 186208.00

ALUMINIUM WORKS

33 Providing and Fixing double action hydraulic floor spring of approved brand and manufacturer having brand logo embossed on the body/plate with double spring mechanism and door wt up to 125kgs including the cost of cutting floors, embedding in floors as required and making good the same mattching to th eexisting floor finishing and cover plate with brass pivot and single piece MS shutter box with slide plate, stainless steel cover plate minumum 1.25mm thickness, etc., all complete as directed by Engineer-in-Charge. 8.00 Nos 2594.35 Rupees Two Thousand Five Hundred Ninety Four and Thirty Five Paise Only 20754.80

34 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15), etc., all complete as directed by Engineer-in-Charge. 100.00 Kgs 582.89 Rupees Five Hundred Eighty Two and Eighty Nine Paise Only 58289.00

35 Providing and fixing 12mm thick pre-laminated particle board (decorative lamination on one side and balancing lamination on other side) flat pressed three layer or graded wood particle board confirming to IS:12823 Grade I, type II, in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P. brass/stainless steel screws etc., complete as per architectural drawings and directions of Engineer-in-Charge. 7.00 Sq m 1046.71 Rupees One Thousand Forty Six and Seventy One Paise Only 7326.97

36 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions, etc., with EPDM rubber / neoprene gasket, etc., complete as per the architectural drawings and the directions of Engineer-in-Charge With float glass panes of 5.0mm thickness (weight not less than 12.50 Kgs/Sq m) 7.00 Sq m 1382.92 Rupees One Thousand Three Hundred Eighty Two and Ninety Two Paise Only 9680.44

37 Providing and Fixing alumnium tower bolts [250 x 10]mm size, ISI marked, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nuts and screws, etc., all complete as directed by Engineer-in-Charge. 10.00 Nos 105.79 Rupees One Hundred Five and Seventy Nine Paise Only 1057.90

38 Providing and Fixing alumnium handles 125mm long, ISI marked, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nuts and screws, etc., all complete as directed by Engineer-in-Charge. 20.00 Nos 60.87 Rupees Sixty and Eighty Seven Paise Only 1217.40

39 Providing and Fixing alumnium hanging Single rubber floor door stopper, ISI marked, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nuts and screws, etc., all complete as directed by Engineer-in-Charge. 10.00 Nos 36.38 Rupees Thirty Six and Thirty Eight Paise Only 363.80

40 Providing and fixing bright finished brass 100mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10) alumnium lever handles of approed quality with necessary screws, etc., all complete as directed by Engineer-in-Charge. 10.00 Nos 798.33 Rupees Seven Hundred Ninety Eight and Thirty Three Paise Only 7983.30

41 Providing and Fixing alumnium extruded section body tubular type universal hydralic door closer (having brand logo with ISI mark) embosed on the body ,door weight up to 36kgs to 80 kg and door width from 701mm to 1000mm) with double speed adjustement with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge. 10.00 Nos 903.25 Rupees Nine Hundred Three and Twenty Five Paise Only 9032.50

WINDOW GLASS FIXING - STEEL FRAME

42 Renewing glass panes with putty and nails wherever necessary including racking out ols putty (float galss of nominal thickness 4mm (weight not less than 10Kgs/Sq m), etc., all complete as directed by Engineer-in-Charge. 20.00 Sq m 1002.01 Rupees One Thousand Two and One Paise Only 20040.20

PANTRY SINK WITH GRANITE PLATFORM & SHELVES

43 Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink with drain board of size [510 x 1040]mm bowl depth 250mm with CI Brackets and stainless steelpugs 40mm including painting of fittings and brackets cutting and making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge. 1.00 No 6381.12 Rupees Six Thousand Three Hundred Eighty One and Twelve Paise Only 6381.12

44 Providing nad Fixing PTMT pillar cock of approved quality and colour, 15mm nominal bore 125mm long foam weighing not less than 120gms, etc., all complete as directed by Engineer-in-Charge. 1.00 No 205.89 Rupees Two Hundred Five and Eighty Nine Paise Only 205.89

45 Providing and Fixing 100mm nominal dia circular type PTMT grating of approved quality and colour, etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 34.54 Rupees Thirty Four and Fifty Four Paise Only 69.08

46 Providing and fixing P.V.C. waste pipe (Semi rigid pipe 32mm dia) for sink or wash basin including P.V.C. waste fittings, etc., all complete as directed by Engineer-in-Charge. 1.00 No 95.46 Rupees Ninety Five and Forty Six Paise Only 95.46

47 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour, 15mm nominal bore with 30cm long, etc., all complete as directed by Engineer-in-Charge. 1.00 No 78.09 Rupees Seventy Eight and Nine Paise Only 78.09

48 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms, etc., all complete as directed by Engineer-in-Charge. 1.00 No 154.67 Rupees One Hundred Fifty Four and Sixty Seven Paise Only 154.67

49 Providing and fixing C.P. brass angle valve 15mm nominal bore for basin mixer and geyser points of approved quality conforming to IS:8931, etc., all complete as directed by Engineer-in-Charge. 1.00 No 527.63 Rupees Five Hundred Twenty Seven and Sixty Three Paise Only 527.63

50 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms, etc., all complete as directed by Engineer-in-Charge. 1.00 No 102.39 Rupees One Hundred Two and Thirty Nine Paise Only 102.39

51 Providing and fixing 600mm long towel rail with total length of 645 mm, width 78mm and effective height of 88mm, weighing not less than 190gms, etc., all complete as directed by Engineer-in-Charge. 1.00 No 651.33 Rupees Six Hundred Fifty One and Thirty Three Paise Only 651.33

52 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes for Internal Work, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints, etc., all complete as per direction of Engineer-in-Charge.

a) 15mm nominal dia Pipes 12.00 R m 457.34 Rupees Four Hundred Fifty Seven and Thirty Four Paise Only 5488.08

b) 20mm nominal dia Pipes 12.00 R m 493.91 Rupees Four Hundred Ninety Three and Ninety One Paise Only 5926.92

53 Extra for providing opening of required size & shape for wash basin / kitchen sink in kitchen platform, vanity counter and similar location in marble / Granite / stone work, including necessary holes for pillar taps, etc., including moulding, rubbing and polishing of cut edges, etc., all complete as directed by Engineer-in-Charge. 1.00 No 899.16 Rupees Eight Hundred Ninety Nine and Sixteen Paise Only 899.16

54 Providing and fixing shutter with 19mm thick one side decorative and other side balacing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bedning machine stc with auto closing spring loaded hinges (hydralic type), etc., complete as per direction of Engineer-in-Charge. (Payment of providing and fixing auto closing hinges shall be paid separtely) 2.00 Sq m 2599.31 Rupees Two Thousand Five Hundred Ninety Nine and Thirty One Paise Only 5198.62

55 Providing and fixing stainless steel fancy handle (200mm) of approved make fixed with SS screws, etc., all complete as directed by Engineer-in-Charge. 5.00 Nos 171.34 Rupees One Hundred Seventy One and Thirty Four Paise Only 856.70

56 Providing and Fixing stainless steel soft closing spring hinges at o degree (hydralic type) of approved make / brand to cupboard shutters with threaded steel screws including making necessary recess in board and finished, etc., all complete as directed by Engineer-in-Charge. 10.00 Nos 249.89 Rupees Two Hundred Forty Nine and Eighty Nine Paise Only 2498.90

57 Supplying and fixing 160mm dia PVC pipes (SWR) to withstand a pressure of 6KGF/Sq cms complying with IS 4985 of approved manufacture jointed with chemical solution, etc., all complete as directed by the Engineer-in-Charge. 365.00 R m 1216.10 Rupees One Thousand Two Hundred Sixteen and Ten Paise Only 443876.50

Sub-Total (Excluding GST) Rupees Thirty Six Lakh Fourteen Thousand Six Hundred Thirty Four and Forty Three Paise Only 3614634.43

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 3614634.43 BELOW % 3614634.43

Add 18% GST Rupees Six Lakh Fifty Thousand Six Hundred Thirty Four and Nineteen Paise Only 650634.20

Grand Total (Including GST) Rupees Forty Two Lakh Sixty Five Thousand Two Hundred Sixty Eight and Sixty Two Paise Only 4265268.63

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/R-81/24-25

Name of Work: Internal, External, Ceiling Painting, Chajja Repairs along with Allied Civil Works in Hydraulic Lab, Instrument Lab, Landing Gear and Radio Lab in Overhaul Division, HAL [BC].

Estimated Amount in Rs.: 4270000

Tender Notice Date : 24.10.2024

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company

2 Type of ownership PlsEnter Type of Ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution

4 Address for correspondence: Pls Enter Address

5 (a) PAN No.: Pls Enter Pan NO

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code 3 #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 I.T Returns for past 03 years 999999 5 J 6

2023-24 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7

9 Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3

YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2

2022- 2023 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2

Average annual Financial turn over 0.00 1281000.00

Avg Annual Turnover criteria is not met 10000000 1

10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed

ESI Registration No/. with proof if any Remarks if any

PF Registration No. with proof if any

11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal

Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000

Date of Issue 200000 40000

Value in Rs. 200001 150000

Solvency value is NOT as per NIT

13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 1708000 500001 250000

Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000

Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Brief Description of Work: Please enter Details for Work No 1 2000000 500000

Completed value of Work in Rs. 2000001 1000000

Date of Commencement of Work 4000000 1000000

Date of Actual Completion of Work: 4000001 2000000

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Brief Description of Work: Pls Enter Details for Work No II

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work: work done

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555

Brief Description of Work: Pls Enter Details for Work No III #REF!

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Mobile No. Pls Enter Details for Person holding Power of Attorney

Ph. No. with STD code

FAX No. with STD code

15 DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

16 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II