PROVN OF MODERN ACCESSORIES AT CERTAIN SMQS (PHASE-II) AND PROVN OF TOILET FACILITIES IN CERTAIN LOCATION

SCHEDULE A BOQ

S & F 18mm thick, 7 ply, plywood, grade BWR, type BB fixed to wooden frame work in wall with nails including taking down all as specified.

S & F Decorative laminates of 0.90 mm thick type matt finish, colour and pattern as approved. complete all as specified and as directed by Engneer-in-Charge

M&L for preparation of old painted surfaces of any dsecrioption and applying a coat of black japan over a coat of red oxide, zinc chrome complete all as specified and as directed,

Mild steel work in framed work such as grills and similar work including framed guard bars, barred iron doors, ladders, framed balusters etc., including of fixing of sheet steel or other covering to doors etc., to be prepared for hanging /sliding with or including either hooks or hinges or steel hanging door fittings etc., confirming to Fe 410-0 or Fe 310-0 work complete all as specified and directed.

M&L Preparation of new steel surfaces over 10 cm girth and applying two coats of synthetic enamel paint including one coat of red oxide primer complete all as specified and directed.

S & F Stainless steel spring hinges of size of approved pattern and make suitable for base/wall unit of modular kitchen one complete (Make : BIR SS or equivalent as approved by GE

S & F Magnetic catches with 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and as directed by Engineer-in-Charge

S & F Stainless steel telescopic slider of 500 mm of approved pattern and make suitable for drawer in base unit in kitchen complete all specified and directed.

S & F Continuous(Piano)hinge 30mm width of flap, bright finish of electrolyte complete all as specified and as directed by Engneer-in-Charge

S & F Stainless steel handles of size 150 mm of approved pattern and make suitable for Base/Wall unit of modular kitchen complete (Make : Spykar or equivalent make as per list of makes)

S & F Brass 4 lever cupboards locks grade I size 65mm complete all as specified and as directed by Engneer-in-Charge

S & F 40 mm dia cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed by Engneer-in-Charge

S & F 6 mm thick teak wood lipping for 18/19 mm thick particle board fixing with nails complete all as specified.

S & F plate rack of size 65cm x 96cm made out stainless steel complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:6 on brick or stone or concrete surfaces finished even and smooth without using extra cement with water proofing compound complete all as specified and directed.

Supply Only integral water proofing compound complete all as specified and as directed.

M&L Preparation of new plastered surfaces wall Applying two coats of OBD over and including a coat of primer, of any description, complete all as specified.

S & F 18/19mm thick both side Prelaminated particle board, interior grade, with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

M&L Granite work (of any type) 18 to 20mm thick (table rubbed and polished including round edge) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over and including 15mm thick screed bed in CM 1:4 in repairs complete all as specified and directed by Engineer-in-Charge.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 including demolition of existing one complete all as specified and directed.

S&F Stainless steel plain basket of size 530 x 505 x 100mm complete. Make : Butterfly or equivalent make as approved by GE

S&F Stainless steel bottle basket of size 200x 508x 431mm B35e. Make : Butterfly or equivalent make as approved by GE

S&F Stainless steel thali basket of size 600x 500x 100mm complete Make : Butterfly or equivalent make as approved by GE

M&L Taking down cement plaster on brick or stone walls, or concrete or ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering and material and labour for Rendering 15 mm thick in two layers on brick or stone or concrete surfaces,first coat 10mm thick in cement mortar 1:4 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.

Surface dressing n exc 15 cm deep in hard/dense soil

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil

Cement concrete 1:4:8 type D-2 (40mm grade aggregate) in foundations, filling and mass concrete

Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thickwalls, built in built in 1:4

Removal of excavated material to a distance exceeding 1.50 Km and not exceeding 5.00 Km and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 with smooth finish without using extra cement

M&L Preparing new surfaces of plastered or unplastered wall and applying two coats of cement based paint over one coat of alkali resistant primer complete wash complete ll as specified and directed.

M&L 100 mm thick Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate ) as in sub base complete all as specified and directed

M&L 40mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate Finished even & smooth without using extra cement

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in D4 neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) complete all as directed.

M&L Glazed ceramic coloured tiles 450 x 300 mm x 7/8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as dado including 10mm thick 1:3 backing coat complete all as specified and as directed.

75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

M&L 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall incuding taking down existing complete all as specified and as directed.

M&L 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and as directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F PVC (SWR) 75mm bore vent cowl complete all as specified and as directed by Engineer-in-Charge

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified .

S&F Factory made Solid PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified.

S&F Butt hinges 100 mm long medium weight cold rolled stainless steel complete all as specified and as directed.

S & F Aluminum handles cast type anodised 150 mm long complete all as specified and as directed.

Supply and fixing 150 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed.

S&F 250mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminum alloy and fixed complete all as specified and as directed.

M&L cement concrete 1:2:4, Type B1 (using 20 mm graded stone aggregate) cast in situ in lintels/chajjas up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed. Note: Reinforcement will be measured and paid separately.

M & L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels/chajjas, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished sufaces of concrete complete all as specified and directed.

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9mm dia or securing with clips ® complete all as specified and directed.

M&L Mild steel bars 5mm to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9mm dia or securing with clips ® in stirrups , spacers and binders etc complete all as specified and directed.

S & F 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 20mm dia CPVC Gate valves (brass insert) as per requirement of the site complete to walls, ceilings or infloors etc. all as specified and directed.

S&F 25mm dia CPVC Gate valves (brass insert) as per requirement of the site complete to walls, ceilings or infloors etc. all as specified and directed.

M&L Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)

M&L Vitreous china squatting pan 'Orissa' Pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe ) including provision of lime concrete bedding fixed complete all as specified and as directed.

M&L Plastic water closet seat closed pattern with flat ottom, and cover and mild steel chromium plated or aluminised hinging device

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F Vitreous China Urinal, full stall type, white excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F Urinal spreader of CP for fixing with 15 mm dia pipe complete all as specified and as directed.

S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.

S&F 600 x 450 mm bevelled edge mirror fixed with 04 Nos Stainless steel studs complete all as specified and as directed.

M&L PVC (SWR) 110mm bore P Trap including complete all as specified and as directed.

Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension,including Pinhead Glass with thickness of 4mm required for fixed & louvers strips, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in imension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Hardcore of broken stone or boulder gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L 75mm thick, plain cement concrete (1:3:6), type C-2 (using 40 mm graded mechanically crushed stone aggregates), as in plinth protection complete all as specified and as directed.

M&L Doom grating 125mm dia with waste hole of PTMT (minimum weight 40gms) complete all as specified and as directed by Engneer-in-Charge.

M&L fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

M&L WHB, vitreous china (flate back or angle back type) of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe Complete all as specified .

S&F 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer- In - charge

M&L 32 mm low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm for WHB complete all as specified and as directed by Engineer-in-Charge

S&F 15mm brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges

S&F 15mm fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F 15mm fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 gradeSt.-240) all as specified and as directed.

M&L PVC connection 15 mm size with PTMT nuts of length 450 mm i complete as directed by Engr-in-charge.

M&L Preparation of new plastered surfaces of wall by applying two coats of white wash complete all as specified and as directed.

M&L Pre painted Coloured corrugated Galvalume roofing system sheet 0.50 mm thick having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws all complete all as directed.

M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L 1000 lit capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S & F 4mm thick non asbestos fibre ceiling board fixed to 605x605mm grid Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified with complete all as specified and as directed by Engineer-in-Charge.

Wiring complete with 1.5 sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade, FRLS cable and incl non metalic PVC conduit with accessories in wall etc incl modular termianl boxes fabricated with 1.6 mm MS/GI sheet concealed to walls etc and 1.5 sqm PVC insulated, unsheathed copper conductor multistranded cable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified for

(a) One light/fan point controlled by one switch

S & F modular switch 1 way 6 Amps, 1 module

S & F white cover plate with frame, 6 module

S & F metal flush box 6 module

S & F ceiling rose, surface type bakelite 65 x 55 mm 3 terminal

Supply and fixing 4 feet, LED light fitting 18 watts (T-8) with out put of not less than 110 lumens / watts, box type made with epoxy white powder coated CRCA sheet steel (decorative) light fitting having G13 bipin holders compitable for mounting on wall / ceiling / surface, ermisible limit of CRI range with recommended burning hours, 4000K/6500K etc, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connctor block etc complete with all accessoires interally pre wired and necessary mounting arrangements, including provision of new 3 core multistranded copper conductor of size 23/0.193 fom ceiling rose to fitting with integrated driver of LED tupe rod 4' x 18 watts complete all as specified an asd directed

Supply and fixing 2 feet, LED light fitting 10 watts (T-5) with out put of not less than 110 lumens / watts, box type made with epoxy white powder coated CRCA sheet steel (decorative) light fitting having G13 bipin holders compitable for mounting on wall / ceiling / surface, ermisible limit of CRI range with recommended burning hours, 4000K/6500K etc, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessoires internally pre wired and necessary mounting arrangements, including provision of new 3 core multistranded copper conductor of size 23/0.193 fom ceiling rose to fitting with integrated driver of LED tupe rod 2' x 10 watts complete all as specified an asd directed

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed

Supply and fixing factory made powder coated distribution board SPN 4 way, double door including bus bar, Neutral bar, standard DIN rail, earth bar complete all as specified and directed

S & F MCB SPN 32 Amp, 240 v, 50 Hz AC suitable for 'C' curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 all as specified

Supply and fixing single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC suitable for 'C' curve, 10 KA breaking capacity conforming to IS 8828 of 1996 all as specified