NIT No. 04 (22-23) Item No. 2

Supply of horizontal split casing centrifugal water pump model IP 150/38 200*150 mm, with Bronze impeller, EN-8 shaft & gland packed coupled with kirloskar / BBL make electric motor of 60 HP, 1475 RPM, TEFC, IE2, 415 volt, 3 Phase, 50 Hz, foot mounted, mounted on common base frame, flexible coupling and coupling guard

LT Distribution panel sheet steel enclosure made out of 2 mm CRCA sheet totally enclosed, powder coated free standing, floor mounted type, dust & vermin proof, outward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating neoprene rubber gaskets to provide IP-54 protection .The each part of the fabricated panel will be strictly subjected to seven tank treatment. The various components, assemblies and sub equipment of the panel will be as per standard given in relevant IS. The bus bar of the panel will be shaped out of high conductivity, electrolytic conductor and shall be liberal sized in aluminium. The control wiring of the panel will be done with PVC flexible copper wires of 1.5 mm cross section. Each wire will be terminating with a ferule crimped to the wire, size 1800MM x1600x375mm. Having following components of approved make. MCCB 415V, FP 3 phase High breaking capacity 50 KA 50Hz, 400Amp with spreader & Handle. Make :- L&T/SiemensMCCB 415V, TP 3phase High breaking capacity 50KA 50Hz, 125 Amp with spreader & Handle. Make :- L&T/Siemens. MCB Single pole 6Amp. Make:- L&T/Havells. MCB Triple pole 63Amp. Make :- L&T/Havells. MCB Triple pole 32Amp. Make :- L&T/Havells. PVC insulated copper flexible cable single core 35 Sq mm Make:-Havells/Gloster/Finolex. Power capacitors 415V unit of 20 KVAR (Rs.247/-per KVAR) Make: Epcos. Over load relay 66-110 A Make: L&T/Siemens. Over load relay 6-10 A Make: L&T/Siemens. Digital Amp. Meter Make :- AE/L&T. Digital Volt Meter 0-500V Make :- AE/L&T. Motor protection Relay Make :- L&T/Siemens. Power contactor 220V 3 phase 95 Amp. Make :- L&T/Siemens. Power contactor 220V 3 phase 25Amp. Make :- L&T/Siemens. Star delta timer on delay make :- L&T/Siemens. Indicating lights LED type RYB & On/Off . Make :- L&T /Havells. Current Transformer 250/5 , 100/5 ,30/5 Make :- AE /Advance. On load change over switch 200 Amp. Open execution type Make :- L&T. Fitting of the above components in panel enclosure with terminal blocks, channels, ferrules, thimble, support insulator on bus bar, required hard wares complete in all respect. Testing & commissioning of panel, as per required parameters with relevant IS .testing of the panel prior to switching on as follow :- (i) Continuity and earth testing. (ii) Meggaring of all equipment for phase to phase, neutral to body, neutral to earth and phase to earth. (iii) Checking for all tightness of nut and bolts. (iv) Alignments of doors etc. (vi) Interlocking tests. All function tests

Supply, 1.1 kV grade, XLPE insulated, stranded Aluminum conductor, galvanized steel flat strip / round wire Unarmored, extruded PVC type ST2 sheathed, conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes 3 Core x 185 Sqmm S.O.R code 18.1.12

Supply, 1.1 kV grade, XLPE insulated, stranded Aluminum conductor, galvanized steel flat strip / round wire Unarmored, extruded PVC type ST2 sheathed, conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes 3 Core x 150 Sqmm S.O.R code 18.1.11

Supply of MS pipe of size 300 mm of thickness 6 mm of medium class of make Jindal/ DJB approved

Supply of MS pipe of size 200 mm of thickness 8 mm of heavy class of make Jindal/ DJB approved

Supply of MS bend of size 300 mm of medium class

Supply of MS bend of size 200 mm of medium class

Supply of foot valve of size 300 mm dia, heavy Duty O.E.M rates S.O.R code 4.11.1

Supply of MS taper of 300*200 mm as per site requirement

Supply of MS slip on flange of 300 mm

Supply of MS slip on flange of 200 mm of ISI mark

Supply of nut bolt of heavy quality

Supply of rubber packing sheet with neoperene50%. Make: Jyoti/national/any DJB approved.

CIDF swing type non return valve as per IS 5312, PN 1.0 CI 13004 , door / bronze to rubber ring / CS 410 tuing pin of 300 mm dia S.O.R code- 4.15.9

CIDF swing type non return valve as per IS 5312, PN 1.0 CI 13004 , door / bronze to rubber ring / CS 410 tuing pin of 200 mm dia S.O.R code- 4.15.7

CI double flanged non rising spindle sluice valve of 300 mm dia PN 1.0 IS :14 Sub, CI / Body / viedge / bronge ring / 55410 shaft contraction & SS CISI maked manual operation

CI double flanged non rising spindle sluice valve of 200 mm dia PN 1.0 IS :14 Sub, CI / Body / viedge / bronge ring / 55410 shabt contraction & SS CISI maked manual operation

Supply Co2 Type Fire Extinguisher capacity 4.5 Kgs completes in all respect. Make: - Life Guard/Omex/ IS mark.

Supply of electrical insulated mats of dielectric strength up to 65KV of size (1mX2mX3mm) confirming to IS 15652. Make: -Jyoti/National

Making of RCC foundation of size 1:2:4 concrete including providing fixing of. foundation bolt and grouting them with the help of tools and tackles as per satisfaction of Engineer in charge

Fixing the M.S. base frame on the RCC foundation the job includes proper leveling and alignment with the help of labour, fitter, welder. Electrician etc as per satisfaction of Engineer in charge. Installation of the pump, motor and other accessories with the help of chain pulley/ crane which is in the scope of contractor. Setting as per position with proper alignment and also making of all electrical connections, fitting all valves, bends etc. in original position and testing / commissioning of the pump set on NO load & full load after commissioning of all connections.

Goodwill Enterprises

paramount systems

Raj Engineering Co.