REPAIR / MAINT AND DEHYDRATION OF DISTRIBUTION TRANSFORMER, POWER TRANSFORMER AND ALLIED HT WORKS INCLUDING REPAIR/MAINT/REPLACEMENT OF HT RMU PANEL, HT UG CABLE, GOD, HT OCB, VCB AND CAPACITOR AND CONNECTED ITEM IN ROORKEE AND PURKAZI UNDER GE ROORK

Amount

Disconnecting defective transformer indoor/outdoor of capacity 750KVA both from HT/LT sides, and then drainage of complete transformer oil, opening of top cover with due care and removal of all HT/LT winding connections from bushing and then lifting of core by means of tripod and chain pulley with due care for inspection and ascertain it’s serviceability state after keeping it aside. Removal of all sludge and unwanted material from tank and core, lowering of core assembly after carrying out required repairs to the winding and core. In case the repairs which are not possible at site then the transformer has to be taken to the work shop for repairs. Note :- (i) The cost of transportation shall be deemed to be included in the quoted rate by the conractor. (ii) The cost of rewinding shall be paid separately. (iii) The cost of dehydration/filtration & other necessary repair as directed shall be measured & paid separately under relevant items of this schedule. (iv) Additional transformer oil for top-up, if required will be filled by contractor and shall be paid under respective item of this schedule.

Disconnecting defective transformer indoor/outdoor of any capacity up to 300KVA both from HT/LT sides, and then drainage of required transformer oil. Opening of top cover LT and HT side bushings with due care and removal of all HT/LT winding connections from bushing and then replacement of head gasket, LT and HT bushing packings complete and ensured that no leakage in transformer from LT/HT bushing and top cover gasket as directed by Engr-in-Charge.

Disconnecting defective transformer indoor/outdoor of any capacity up to 315-750 KVA both from HT/LT sides, and then drainage of required transformer oil. Opening of top cover LT and HT side bushings with due care and removal of all HT/LT winding connections from bushing and then replacement of head gasket, LT and HT bushing packings complete and ensured that no leakage in transformer from LT/HT bushing and top cover gasket as directed by Engr-in-Charge.

Taking down of power transformers any capactiy from PCC plateform with due care after disconnecting all HT/LT connections, Transportation of transformer to workshop from site of installation to workshop for repairs including loading and unloading of transformer, and replacing it to site from where it was taken for repairs/(as required by Engr incharge) complete .and then lowering it by means of crane and remounting on platform after repairs including testing with connected all type connection all as directed and specified by engineer in charge.

Taking down of transformers of capacity50/100 250/300/400/500/750KVA from 2/4pole structure or from PCC plateform with due care after disconnecting all HT/LT connections on pole mounted structures, Transportation of transformer to workshop from site of installation to workshop for repairs including loading and unloading of transformer, and replacing it to site from where it was taken for repairs/(as required by Engr incharge) complete .and then lowering it by means of crane and remounting on 2/4pole structure after repairs all as directed and specified by engineer in charge.

Taking down of transformers of capacity50/100 250/300/400/500/750KVA from 2/4pole structure or from PCC plateform with due care after disconnecting all HT/LT connections on pole mounted structures, Transportation of transformer to PCC/ 2 or 4 pole structure to any other required location in Roorkee cantt lowering and remounting on 2/4pole structure it by means of crane after disconnecting all connection and reconnection in new location including earthing connection and as directed and specified by engineer in charge.

Material and labour for replacement of worn out HT copper coils made out of super enameled insulated copper wire all as per existing size and shape including all insulating, binding, material and then varnishing complete all as specified and directed by engineer in charge

Material and labour for replacement of worn out LT copper coils made out of super enameled insulated copper strip all as per existing size and shape including all insulating, binding, material and then varnishing complete all as specified and directed by engineer in charge

Dehydration/centrifuging of transformer oil by means centrifuging machine electrically operated at site of installation of transformer in running condition of transformer including testing of transformer oil before and after centrifuging from top and bottom of transformer at 4mm gap the BDV should be 40KV complete all as specified and directed by engineer in charge.

Supply and topping up of transformer oil of dielectric strength of 65 KV complete all as specified and directed by engineer in charge.

Material and labour for replacement of worn out bushing rod made out of brass with heavy duty three nuts and three washer at both ends suitable for HT side all as exiting size, shape and length suitable for following capacity transformers :- (i) 160 – 200 KVA Transformers.

(ii) 300 – 400 KVA Transformers.

(iii) 500 -- 750 KVA Transformers

(iv) 50 - 100 KVA

Material and labour for replacement of worn out bushing rod made out of made out brass with heavy duty three nuts and three washer at both ends suitable for LV side all as exiting size, shape and length suitable for following capacity transformers :- (i) 160 – 200 KVA Transformers.

(ii) 300 – 400 KVA Transformers.

(iii) 500 -- 750 KVA Transformers

(iv) 50 - 100 KVA Transformers

Material and labour for replacement of worn out porcelain bushing for 11KV HT side indoor /outdoor transformers with rubberised cork sheet washers 4mm thick all as required at site and as directed by engineer in charge suitable for following capacity transformers:- (i) 160 – 200 KVA Transformers.

(ii) 300 – 400 KVA Transformers.

(iii) 500 -- 750 KVA Transformers

(iv) 50 – 100 KVA Transformers

Material and labour for replacement of worn out porcelain bushing for .433 KV LT side indoor /outdoor transformers with rubberised cork sheet washers 4mm thick all as required at site and as directed by engineer in charge suitable for following capacity transformers:- (i) 160 – 200 KVA Transformers.

(ii) 300 – 400 KVA Transformers.

(iii) 500 -- 750 KVA Transformers

(iv) 50 – 100 KVA Transformers

Material and labour for replacement of worn out rubberised cork sheet 4mm thick for transformer top cover all as required at site and as directed by engineer in charge suitable for following capacity transformers:- (i) 160 – 200 KVA Transformers.

(ii) 300 – 400 KVA Transformers.

(iii) 500 -- 750 KVA Transformers

(iv) 50 – 100 KVA Transformers

Material and labour for replacement of worn out rubberised cork sheet 4mm thick suitable for HT/LT side bushing of off sizes all as required at site and directed by engineer in charge.

M & L Preparation of old surface of power transformer for painting externally including fins/radiators removal of all rust/oil/grease and unwanted material and then two coats of synthetic enamel metallic paint by means of spray gun at site of installation of transformer complete all as specified and directed by engineer in charge suitable for following capacity of transformer:- (i) 2 MVA

(ii) 3 M VA

(iii) 5 MVA

M & L Preparation of old surface of transformer for painting externally including fins/radiators removal of all rust/oil/grease and unwanted material and then two coats of synthetic enamel metallic paint by means of spray gun at site of installation of transformer complete all as specified and directed by engineer in charge suitable for following capacity of transformer:- (i) Upto 160 KVA.

(ii) 300 – 400 KVA

(iii) 500 – 750 KVA

Material and labour for replacement of worn out silica gel breather all as per existing sample suitable for following capacity of transformers of any make.:- (i) 2 MVA.

(ii) 3 MVA

(iii) 5 MVA

(iv ) 160 – 200 KVA.

(vi) 500 – 750 KVA

(vii) 50 - 100 KVA

Material and labour for replacement of worn out off load tap changer all as per existing sample suitable for following capacity of transformers of any make.:- (i) 160 – 200 KVA.

(ii) 300 – 400 KVA

(iii) 500 – 750 KVA

(vii) 50 -100 KVA

Material and labour for special earthing to substation equipment with GI earth plate 600X600X6mm buried directly in ground vertically to a depth not less then 4.5Mtr depth below ground level. Earth plate shall be surrounded with adequate quantity of charcoal dust with common salt packed 250mm on all sides of earth plate including excavation , earth work in any soil, returning filling in removal of surplus soil to a distance up to 50Mtrs, concrete pit all as shown in electrical plate No.5 of SSR part I -1991 RCC cover with suitable handle for lifting and GI strip 32X6 mm soldered and riveted to earth plate at one end and brought up to test point including 50mm bore, GI tubing 20mm light grade pipe for watering all as specified and shown in drawing, complete all as specified and directed by Engineer in charge.

Material and labour for oil temperature gauge /thermometer suitable for transformers all as per existing shape and size for any make and model transformers all as specified and directed by engineer in charge.

M&L for XLPE insulated screened PVC bedded galvanised steel strip or armoured eletric power cable ( heavy duty) with aluminium conductor 11000 V grade cross sectional area 185 sq mm size complete all as speciifed and directed. Make :- Havelles, Polycab, Universal, Finolex, Torrent

M&L for XLPE insulated screened PVC bedded galvanised steel strip or armoured eletric power cable ( heavy duty) with aluminium conductor 11000 V grade cross sectional area 120 sq mm size complete all as specified and directed. Make :- Havelles, Polycab, Universal, Finolex, Torrent

Exacation in trenches n exc 1.5 Mtr and n exc 1.5 Mtr wide in soft/loose soil complete all as speified and directed.

M&L for sand cushioning for cable protection complete all as specified and directed.

Returning filling spreading levelliong and well ramming watering in layer n exc 0.15m complete all as specified and directed.

Removing of excaveted material n exc 50 Mtr and depositing where directed at a level not exc. 1.5m from ground complete all as specified and directed.

Supply & Laying in replacement of reinforced precast concrete cable cover class HV, flat size 300x180x40mm complete all as specified and directed.

Supply testing jointing and commissioning of cold shrinkable type straight through joint kit and incl jointing materials suitable for cable size 120- 185 sq mm 3 Core X LPE 11 KV cable complete all as spd and directed . Make- Raychem/ Dension/ Mseal

All as per item No 59 above but suitable for cable size 70-95 sq mm 3 core XLPE 11 KV cable.

Supply testing jointing and commissioning of indoor cold shrinkable end tremination joint kit and incl jointing materials suitable for cable size 120-185 sq mm 3 Core X LPE 11 KV cable complete all as specified and directed . Make- Raychem/ Dension/ Mseal

Supply testing jointing and commissioning of outdoor cold shrinkable end tremination joint kit and incl jointing materials suitable for cable size 120 to 185sq mm 3 Core X LPE 11 KV cable complete all as specified and directed . Make- Raychem/ Dension/ Mseal

Supply testing jointing and commissioning of outdoor cold shrinkable end tremination joint kit and incl jointing materials suitable for cable size 70-95 sq mm 3 Core X LPE 11 KV cable complete all as specified and directed . Make- Raychem/ Dension/ Mseal

M&L for lightning arrestor expulsion type complete with all fittings transmission class discharge capacity 65 Kiloampere suitable for 11000 V grade . Make: Schenider, BHEL, GE Power, Oblum Insulators, WS Insulators, Southern Insulators.

S&F as in replacement Digital protective relays comprising of 3 Phase over current plus earth fault relay with high set operational with 24 volt to 110 volts AC / DC, Dc dual rated CT model MC 61A as per Cat Part no-MC 61 Anx of L&T including complete wiring with suitable size wire as per existing and fixing arrangement complete as secified and directed. Make:- Havells, Jyoti, Crompton Greaves, Bharat Bijlee, AE

S&F as in replacement Digital protective relays comprising of over current plus earth fault relay with high set operational with 24 volt to 110 volts AC / DC, Dc dual rated CT model ADR 131A of Ashida make including complete wiring with suitable size wire as per existing and fixing arrangement complete as secified and directed. Make:- Havells, Jyoti, Crompton Greaves, Bharat Bijlee, AE

S&F as in replacement Digital protective relays comprising of under / high voltage relay with with high set operational with 24 volt to 110 volts AC / DC, Dc dual rated CT model ADR 132B of Ashida make including complete wiring with suitable size wire as per existing and fixing arrangement complete as secified and directed. Make:- Havells, Jyoti, Crompton Greaves, Bharat Bijlee, AE

Supply and fix vertical type air break gang operated tripple pole, mechanically operated, outdoor type with all fittings, accessories, mounted on and including HT 11 KV porcelain insulators and steel channel frame GI Operating rod 25 mm dia of suitable length worked from ground including locking arrangements, with 7 livers Naval brass lock, suitable for 200 Amps current rating complete.(set of three) complete all specified and directed. Make Haryana Electric Industries, Rashtriya, Pactil, Jaipuria, MEI.

Supply and fix drop out fuse unit explusion type for out door air break gang oprated switch single pole mounted on and including insulators for 11 kv working pressure fixed to and including MS channel with nuts, bolts, and washer etc. Synthetic bounded fuse camng tube complete with line fap suitable for current carry capcity upto 100Amps all as directed. ( set of three) Make Haryana Electric Industries, Rashtriya, Pactil, Jaipuria, MEI.

Preventive maintenace/ servicing of HT RMU of make ABB by dismantling of breaker mechanism checking the various critical setting in mechanism, busbar chember,Electric short circuit indicator, current and earthfult relay, gas pressure/ densicty, manually operated mechanisms, fuses , fuse conister, feeder busbar intenal/external busbar, SF6 tank, LV copartment, auxiliary switch, interlocking lever, current transformer relay etc. checking of spring charging mechanism, checking of pole contact , greasing/ lubricating of mechanism moving parts, checking of contact pressure, alignment and adjusting the same, triping coil test trial & teting of RMU for smooth and correct fuctioning by ABB Engr or authorized company complete all as specified and directed by Engr-in-Charge.

M&L inreplacement of triping/ closing coils suitalbe for 33KV VCB Make : ABB

M&L inreplacement of triping/ closing coils suitalbe for 11KV VCB Make : CG

Supply only anti rusting spray suitable for mechanical moving parts of 33/11 KV VCB & OCB.

M&L inreplacement of oil tank gasket for 11KV OCB of make CG

M&L inreplacement of vent tank gasket for 11KV OCB of make CG

M&L inreplacement of hold on catch assembly for 11KV OCB of make CG

M&L inreplacement of Rectifier for motor circuit of 11KV VCB of make CG.

M & L inreplacement of U/S Trip coil of RMU Make : Ashida Relay

M&L inreplacement of tripping shaft with spring and trip strip for 11KV VCB of make CG.

S&F HT bushing of RMU Make: ABB

Repair to mechanism switch system of 11 KV RMU as per diagram for earthing ,interlocking ,spring charging as directed by Engr in Charge.

S & Fill SF6 gas to be filled in HT RMU's 11000 volt grade complete all as spd and directed

S&F as in replacement of HV backup fuse link, CEF cap iN 16Amp i3 55 A, UN 12Kv i163 A, Striker 60N in SF6 RMU Make ABB cat part No IYMB631036M0003, complete all as spd and as directed. (set of Three)

S&F as in replacement of HV backup fuse link, CEF cap iN 25Amp i3 55 A, UN 12Kv i163 A, Striker 60N in SF6 RMU Make ABB cat part No IYMB5301035M0004, complete all as spd and as directed. (set of Three)

S&F as in replacement of HV backup fuse link, CEF cap iN 40Amp i3 55 A, UN 12Kv i163 A, Striker 60N in SF6 RMU Make ABB cat part No IYMB5301035M0004, complete all as spd and as directed. (set of Three)

Supply and fix horizontal Rotating type air break gang operated 400/600 Amp tripple pole, mechanically operated, outdoor type with all fittings, accessories, mounted on and including HT 33 KV porcelain insulators and steel channel frame GI Operating rod 25 mm dia of suitable length worked from ground including locking arrangements, with 7 livers Naval brass lock, suitable for 200 Amps current rating complete. Make Haryana Electric Industries, Rashtriya, Pactil, Jaipuria, MEI.

Supply and fix drop out fuse unit explusion type for out door double stack chanal air break gang oprated switch single pole mounted on and including insulators for 33 kv working pressure fixed to and including MS channel with nuts, bolts, and washer etc. Synthetic bounded fuse camng tube complete with line fap suitable for current carry capcity upto 100Amps all as directed. Make Haryana Electric Industries, Rashtriya, Pactil, Jaipuria, MEI.

Supply and fix HT 33 KV outdoor non-linear type lightening arrestor with mountings, accessories complete fixed on cross arms of two pole structure/GI flat strip and connect with same size of ACSR conductor encased in PVC alkathine pipe with all fittings connected to earth stripwith nut, bolt, washer transmission class having discharge capacity of 10 kilo Amps and suitable for working pressure complete all asspecified and directed complete. Make: Schenider, BHEL, GE Power, Oblum Insulators, WS Insulators, Southern Insulators.

M&L for removing all connections, bindings etc of ACSR/AAC conductor on existing HT/LT poles & stretching of ACSR/AAC conductor upto required sag of any size and cross section of conductor and stretching of GI wire on existing pole including making necessary connection & binding with binding wire including cutting of tree branches from both sides upto the stress on each side complete all as specified and as directed by Engr-in-charge.

M&L in repalcement of aluminium conductor, steel reinforced off sizes including binding wire and jumper connect with PG clamp made out of aluminium alloy accodring to IS-617 complete all as specified and directed by Engr-in-charge.

Material and caliberation of exisisting 4 pole Micro processor based digital programmer Protection relay unit having over current handling capacity up to 10 Amps for 10 milli sec and Earth fault arrest less then 04 mili sec to arrest the fault of individual VCB at site complete all as specified and directed by Engr-in-Charge. Make:- Havells, Jyoti, Crompton Greaves, Bharat Bijlee, AE

S&F CT 11 KV VCB of Ratio 100-50/5+5, Class 1.0, VA 15 core 1 & core 2 , IL 12/28/75 KVP STC 18.4 KA for 1.0 Sec. complete all as specified and directed by Engr-in-Charge Make : Crompton Greaves, C & S, Prayag.

S & F in replacement of unserviceble PT with new PT 11 KV oil/dry type as per existing make and type complete all as specified and directed by Engr-in-Charge Make : Crompton Greaves/ABB/C&S.

M&L for High Tension cable fault checking by high tension cable fault testing machine by disconnecting the HT cable end termination including insulation testing complete of faulty cable.complete all as specified and directed by Engr-in-Charge.

Taking down rusted/unsv mild steel work and M&L for mild steel work as in cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot , drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.

Supply & Fixing in replacement of existing PCC/Steel pole with new steel tubular poles complete with cast iron base plate, final taper, plug, bolts, nuts & washers as specified type 410 SP-55(11.0 mtr long) including re-fixing of removed accessoreis such as ACSR/AAC conductor, cables, street light fittings, clamps, nuts & bolts etc complete all as specified and directed by Engr-in-charge.Note :- Excavation, MS work and PCC work will be measured and paid separately. Make:- Jindal Tube Co, Jai Bharat, M/s Sohan Lal & Sons.

M&L for PCC work type D-2 (1:4:8) with 40mm graded aggregate for foundation to poles / stays/strutus or basements etc complete all as specified and directed.

M & L for cement concrete 1 :3 :6 type C-2 using 40 mm graded aggregate incl necessary form work all as specified.

Dismentaling of old steel tubular pole LT/HT after excavation of PCC and disconecting of cross arm and insulators,and shifting it to new location as required on site including all ACSR conductor any size/ cross arm/insulators connections including PCC work with ratio 1:3:6 and coping and testing of overhead line complete all as specified and directeded.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for finding of the cable fault in HT/LT underground cable and returning filling (including old bricks and sand) the same after rectification of the cable fault in any type of soil complete all as specified and directed.

Dismantling insulators of any type, any size.

S & F pin type, porcelain, vitreous, white, brown or green insulator, including one galvanized mild steel spindle, two galvanized iron washers and one galvanized iron nut, 150 mm height, 150 mm dia for 11000 Volt grade, complete all as specified. Make :- Bengal Pottries Ltd, Mordern Insulators, Hitkari, CJI Denson.

S & F disc type insulator, porcelain, vitreous 145 mm high and 255 mm dia ball and socket type, white, brown or green, with tension clamps for conductor, working pressure 11000 volts, complete all as specified. Make :- Bengal Pottries Ltd, Mordern Insulators, Hitkari, CJI Denson.

Cutting through existing bituminous road /PCC/floor/approx size width 50cm X 60cm depth along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finish complete all as specified.

Taking down old rusted galvanized iron pipe and providing galvanized pipe 100 mm bore light grade in trenches / road / nallah or fixed along wall/ pole including mild steel clamps, screws etc, complete all as specified and directed. Make: Jindal/ Tata steel / Prakash Surya.

SHRI RAM ENTERPRISES