REPAIR / MAINTENANCE OF FLOORING, PLASTERING, TILING, SANITARY FITTING, LEAKAGE, SEEPAGE, OVERHEAD TANKS, FLOAT VALVE, ROOFING, FALSE CEILING AND OTHER MISC WORKS IN BILLET AREA UNDER GE (AF) SRINAGAR.

Amount

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including rubbish off the premises, all as specified..

M&L 15 mm thick screed or bedding layer in cement mortar (1:4) for laying floor finishes, complete all as specified.

M&L for 10 mm thick rendering / backing coat in cement mortar (1:3) to receive wall tiles, complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, all as specified.

All as per item No 4 above here-in-before but as in Skirting.

M&L for coloured glazed ceramic tiles in vertical surfaces of size 450 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified.

Demolition of RCC selves / cooking platform (reinforcement cut as required to facilitate demolition) and similar suspended work and removing debris form site all as specified and directed.

M&L for RCC 1:2:4 using, type B0, using 12.5 mm graded stone aggregate as in selves / cooking platform and similar work complete all as specified & directed.

Use & waste form work to soffits & side of selves / cooking platform flat, fair finished surfaces of concrete not exceeding 100 mm thick complete all as specified & directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape including cranking bending spirally for hooping for columns hooking end and binding with and including mild steel wire (annelead) not less than 0.9mm dia or scuring with clips.

M&L for granite (of any type) work (table rubbed and polished) 20 mm thick as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over screed bed in cm 1:4, complete.

Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified.

M&L for 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the top surface even and smooth, without using extra cement complete all as specified and as directed by Engineer-in-charge.

S&F Glass dividing strips, 3 mm thick, 38 mm wide, fixed in position with cement mortar complete all as specified.

M&L for 100 mm thick cement concrete 1:3:6, type C-2,(using 40 mm graded stone aggregate) as in Sub base for path / flooring complete all as specified and as directed.

M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing debris from site all as specified and directed.

M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and as directed.

M&L for Brick work with sub class 'B" (using old size bricks) straight or curved of on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

Taking down cement plaster of any description on brick or stone masonry wall, etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement and mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and as directed by Engineer-in-Charge. Note:- WPC will be measured and paid separately.

Supply only Liquid water proofing compound.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coats of cement base paint over one coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying one coat of cement base paint, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

M&L for applying 3 mm thick cement base wall care putty in two coats on plastered surface of wall, and making the surface even & smooth for receiving distemper / paint of any description all as specified & directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer all as specified and directed. Note:- Cement base wall care putty where ever directed will be applied and will be measured & paid separately

M&L for Preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge

M&L for Preparation of Old decorated surfaces of ceiling including cleaning brooming down or with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts cleaning oil and greasy spots, trading oil, greasy spots etc and applying two coat of white wash complete all as specified and as directed.

M&L for cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 25 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.

S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.

S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrieved from item No 33 above).

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrieved from item No 34 above).

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 25 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrieved from item No 35 above).

M&L for Lagging to pipes 15 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

M&L for Lagging to pipes 20 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

S&F in repair 15 mm size Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F in repairs 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F in repairs 25 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repairs for 15 mm size angle cock fancy type, cast copper alloy chromium plated, with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F in repairs for 15 mm size bib taps fancy type, cast copper alloy chromium plated, with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F in repair PVC connection 15 mm size, of length 600 mm, with PTMT nuts, complete all as specified and as directed by Engineer-in-Charge

S&F in repair 15 mm size Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 20 mm size Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 25 mm size Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Tubular towel rail stainless steel chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass chromium plated shower roses with swill joints, 80 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed..

S&F in repairs white Vitreous china wash down water closet pan (pedestal pattern) and trap with fixing bolt, connection to drain (or outgoing pipe) and to flushing pipe, etc, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs white Plastic water closet seat cover, closed pattern with flat bottom, and cover with aluminium hinging device, complete.

S&F in repair PVC low level flushing cistern, valve less, Syphonic action type, double push bottom, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection complete all as specified.

Supply and fix in repair white vitreous China, under counter wash hand basin, oval shape, of size 595 x 420 x 200 mm with all fixing accessories fixed in counter, supply & fix new brackets, 32 mm size brass chromium plated waste coupling, complete, all as specified & directed.

Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 550 x 400 mm fixed on and including new brackets complete including, 32 mm size brass chromium plated waste coupling, chain and plug and porcelain stopper, etc complete.

S&F in repair, PVC flexible waste pipe, 32 mm bore for WHB & sink complete all as specified and directed by Engineer in Charge.

S&F in repair Vitreous China urinal half stall type, white, with grating and union for discharge pipe and including waste pipe(excluding flushing cistern), complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinals to plugs including 60 mm long brass screws including brass chromium plated urinal spreader for fixing with 15 mm dia pipe all as specified and directed by Engineer-in Charge

S & F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with quarter turn capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm size central hole basin mixer for mixing hot & cold water, cast copper alloy chromium plated with quarter turn capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe including 450 mm long braided connection pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm size pillar taps, cast copper alloy, chromium plated, fancy type, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair Stainless steel Grating doom 100 mm dia, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Stainless steel Grating doom 125 mm dia with waste hole, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair ABS plastic chromium plated Health faucet fixed with spring action and lever along with Flexible hose with brass nut of length 1 m to 1.2 m fitted in the existing water connection in the toilets, Complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass chromium plated Jet Spray of Standard size for EWC along with CP connection and all fittings as fixed, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Toilet paper holder with flat recessed type stainless steel body fixed to walls with chromium plated brass screws, complete all as specified and as directed by the Engr-in-Charge.

S&F in repair brass spindle with nylon washer to Brass chromium plated bib taps, stop cocks, pillar taps, wall / sink mixer etc, complete all as specified and as directed by the Engr-in-Charge.

S&F in repair Glass Shelf of size 500 mm x 125 mm wide with stainless steel wire guard fixed on wall with and including bracket and brass screws and wooden / plastic cleats.

S & F in repairs Stainless Steel Soap dish, fixed to plugs with chromium plated brass screws Complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20 mm Dia Curtain rail, stainless steel chromium plated, fixed with bracket and end caps etc including taking down of existing curtain rail, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge.

S&F 100 mm size butt hinges, Stainless Steel complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete.

S&F 150 mm size, aluminium anodized handles, cast type complete all as specified and directed by Engineer-In-Charge.

S&F in repair, 4 mm thick Figured glass pin head type fixed to door / window / ventilator with oil putty / wooden bead / rubber gasket and aluminium snap beading, complete all as specified and directed by Engineer in Charge. Note:- Old rubber bead / wooden bead / aluminium snap beading retrieved from demolition of glass to be reused for fixing of new glass.

S&F in repair, 3 mm thick sheet glass ordinary quality fixed to door / window / ventilator with oil putty / wooden bead / rubber gasket and aluminium snap beading, complete all as specified and directed by Engineer in Charge. Note:- Old rubber bead / wooden bead / aluminium snap beading retrieved from demolition of glass to be reused for fixing of new glass.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair 500 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete

Supply and fix in repair 1000 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete

Dismantling of Plain or corrugated steel sheeting any gauge, thickness, from roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete.

All as per item No 89 but except Sheets using sheet retrieved vide item No 88 above

S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275.

M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Rolled mild steel work in roof trusses (framed), trussed, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge

M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, wind Tie etc Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings Fe- 290 (Gde E- 165) (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L for tightening bolts and closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6 mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25 mm in length complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of new zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coat of synthetic enamel paint over one coat red oxide primer in camouflaging pattern complete all as specified and directed by Engineer-in-Charge

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets & snap grid complete all as specified and directed by Engineer-in-Charge.

S&F snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with galvanized iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print) complete all as specified directed by the Engineer-in-Charge.

M&L for Providing and fixing Gypsum tiles of size 600 mm x 600 mm x 12 mm thick in false ceiling fixed or laid / inserted to GI framework with screw or as per manufacturers instructions, complete all as specified and directed by Engr-in-Charge.

S & F in repair Non asbestos fiber cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 6 mm thick fixed or laid / inserted to timber / GI / Aluminium framework with screws complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new surface of ceiling board of any description and applying two coats of oil bound distemper over one coat of primer and 2 mm thick cement base wall care putty all as specified & directed.

M&L for Preparation of old decorated surfaces of ceiling including cornices etc by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper complete all as specified and directed by Engineer-in-charge.

Taking down PVC (SWR) pipes 75 / 110 mm dia, from wall / trenches including all fittings, heads, shoes, bends, swan necks etc, all as specified.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp all as specified.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp all as specified.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches complete all as specified.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches complete all as specified.

S&F 75 mm size PVC (SWR) bends any radius complete all as specified.

S&F 110 mm size PVC (SWR) bends any radius complete all as specified.

S&F 75 mm dia PVC (SWR) branch piece, double (double Y) equal or unequal provided with access door complete all as specified.

S&F 110 mm dia PVC (SWR) branch piece, double (double Y) equal or unequal provided with access door complete all as specified.

S&F in repair PVC (SWR) gully trap of size 110 mm, setting in plain cement concrete 1:2:4 type B1, and jointing with solvent cement complete all as specified & directed.

S&F in repair PVC (SWR) 75 mm dia of outlet, floor trap with grating including jointing to waste pipe with solvent cement fixed in cement concrete type B-1 (1:2:4) complete.

S&F in repair PVC (SWR) 75 mm dia of outlet, multi floor trap with grating including jointing to waste pipe with solvent cement fixed in cement concrete type B-1 (1:2:4) complete.

M/S Abdul Ahad Rather

M/s Lal Enterprises

M/S M.R. Construction

M/S GULZAR ENTERPRISES

M/S WANI AND SONS

M/S LUCKY BUILDERS

NAJAR ENTERPRISES