Special repairs to toilet and bathroom blocks of bldg No P-48, P-49, P-50, P-51 of OTM at 10 JAK LI under GE (South), Delhi Cantt-10

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position and removing from site complete all as specified and directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed..

M&L for brick work with sub class 'B' old sized bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 as in manholes complete all as specified and directed.

M&L for brick work with sub class 'B' old sized bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors and aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick granite(of any type) work(table rubbed and polished) cooking platform and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm (square/rectangular) area of Each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match the colour of tiles over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0( using 12.5 mm graded stone aggregate) as in sub base of floor etc. complete all as specified and directed.

M&L for coloured glazed ceramic tiles 350x250x7mm or 450 x 350 x 7mm thick in dado/ skirting, set and jointed in neat cement slurry & pointed in coloured cement to match the colour of tiles over & including 10 mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm dia (outlet) PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removing from site complete all as specified and directed.

All as per Srl item No. 15 here-in-before but 20 mm bore pipe.

S&F 20 mm bore tubes galvanized steel tubing, medium grade, with all fittings and fixed to walls/ceiling or laid in floors complete all as specified and directed.

All as per Srl item No. 17 here-in-before but 15 mm dia

S&F in repairs bib tap 15 mm bore brass chromium plated (fancy type, etc complete all as specified and directed.

S&F in repair angular stop cock, brass chromium plated fancy type complete all as specified and directed.

S&F in repair 15 mm bore ball brass valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair PVC valve less, symphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including PVC flushing pipe 32 mm dia, and fixed complete all as specified.

S&F in repairs brass chromium plated over head shower rose of 100 mm dia including fixing to steel pipe or union complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm n. exc. 2 Sqm each complete all as specified and directed..

M&L for flush shutters 35 mm thick with solid core construction with block board core and ply wood face panes with commercial type on one side and decorative face veneer on other side including lipping/frame to match complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site as per specification & drawing.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, chowkhats frame etc.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed..

S&F mild steel butt hinges of size 100 mm, medium weight complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed..

S&F extruded aluminium alloy handles, fabricated type, anodized of size 150 mm complete all as specified and directed.

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repairs 2000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc. and removal of rubbish off complete all as specified and directed.

M&L for rendering 10 mm thick on brick work or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and directed.

S&F 100 mm dia grating doom of Chromium plated complete all as specified and directed.

M&L for 5 mm thick rendering in cm 1:3 on concrete surfaces in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of Oil Bound Distemper, white or tinted, over 1-2 mm thick wall care putty including preparation of surfaces complete all as specified and directed.

M&L for preparation of new surface of walls and applying two coat of oil emulsion distemper white or tinted over 1-2 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old ceiling surfaces and applying one coat of white wash complete all as specified and directed.

M & L for Rendering 15 mm thick in CM 1:3 on floor slab including sides of sunken portion finished even & smooth W/O using extra cement.

M&L for applying evenly a tack coat of hot blown bitumen 85/25 grade at the rate of 1.50 kg/Sqm and pasting Polyethylene film over bitumen surface complete all as specified and directed. Note :- Polyethylene film shall be measured and paid separately.

Supply only polyethylene film 150 micron thick (Weight 1410 gms per 10 Sqm)

M&L for PCC 1:5:10 type E2, (using 40 mm graded stone aggregate) in sunken floors filling in mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded aggregate)in coving at junction of vertical and horizontal sunken portion complete all as specified and directed.

S & F aluminium ventilator with top hung shutter without sash bars, aluminium sections( powder coated) weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.). hinges type B-21 100 mm long (2 no.) suitable handle (1 no.) complete all as specified including 4 mm thick pin headed glass in panels etc. complete all as specified and directed.

S&F vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F 15 mm bore concussive push button taps of cast copper alloy, screwed for iron pipe and fixed in repairs complete all as specified and directed.

S&F in repair brass chromium plated Pillar cock with extension body 15 mm bore complete all as specified and directed.

S&F in repair for Counter sunk vitreous China wash hand basin, oval shape flat back, size 550x400 with waste coupling , 32 mm dia PTPT full thread complete all as specified and directed.

S& Fixed in repair Vitreous China Urinal, full stall type, including fixing long screw and urinal water spreader PTMT of any colour fixing 15 mm dia etc. complete all as specified and directed.

S&F towel rail 600 mm long of brass chromium plated fixed with & including chromium plated brass screw complete all as specified and directed.

S&F soap dish vitreous china white 160x180x90 etc. complete all as specified and directed.

Dismantling cast iron work of any description and removing from site at any height & any position complete all as specified and directed.

S&F in repair cast iron floor trap/nahani trap including stainless steel gratings, 75 mm dia of outlet, including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed.

S&F 75 mm bore cast iron, sand cast ,soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. Note :- The rate quoted by the contractor is including necessary scaffolding etc.

S&F 100 mm bore cast iron, sand cast ,soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed. Note :- The rate quoted by the contractor is including necessary scaffolding etc.

S&F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm bore pipe complete all as specified and directed.

S&F 75 mm dia cast iron cowls complete all as specified and directed.

S&F branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door for 100 mm bore pipe complete all as specified and directed.

S&F in repair vitreous china partition , coloured of size 700 x 340 x 120 mm complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, steel peg stays complete with glazing bars dovetailed or welded, complete all as specified and directed.

M & L for sheet glass ordinary quality 4 mm thick and glazing with oil putty in squares exc. 0.5 sqm each pane complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified and directed.

M&L for repairing/ welding to steel windows including making functional for easing and opening and closing and replacing unserviceable parts complete all as specified and directed.

S&F 32 mm dia LDPE pipe of rating 6 kg/Sqcm for waste pipe of wash hand basin complete all as specified and directed.

S&F 40 mm dia LDPE 6 kg/Sqcm for waste pipe of urinal complete all as specified and directed.

Taking down carefully the old U/S aluminum point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etc. and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area i.e. with OBD/colour wash/white wash as the existing finish complete all as specified and directed.

M&L for point wiring complete with single core multi strand copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 Volts grade electrical cable in existing concealed PVC conduit medium grade and sunk in new pressed steel terminal boxes of required size factory made and factory painted with stove enamelled black paint with top cover 3 mm thick plastic/laminated sheet (ISI Marked) of required colour with screwed and cup washer with all accessories including 1.5 Sqmm single core with multi strand copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified & directed for following : Note : (1) The rate is inclusive cutting /chasing and making good the disturbed surface with cm 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete. (2) New conduit with connected accessories will be laid if there is damage/blockage in existing conduit and the cost of the same is included in quoted rate.

One light / fan point controlled by one No. one way switch

One light point controlled by two Nos. 2-way switch

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

All as per item No 80 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 socket outlet point on independent board.

S&F switch piano flush type 5/6 Amp complete one way single pole complete all as specified and directed.

S&F switch piano flush type 6 Amp two way complete all as specified and directed.

S&F socket outlet 5 pin 5/6 Amp complete two in one complete all as specified and directed.

S&F switch piano flush type 15 Amp complete all as specified and directed .

S&F socket outlet 2 in 1, 5 pin 15/5 Amp complete all as specified and directed .

Supply fix batten holder PVC insulated body complete all as specified and directed .

S&F ceiling rose surfaces bakelite minimum size 65x50mm with two/ three terminals complete all as specified and directed.

S & F LED Integrated Batten T5 20 Watt, 4' white, indoor decorative PVC extruded T5 LED batten integrated type complete with including flexible wire complete all as specified and directed.

S & F LED RETROFIT LAMP of 12 Watt LED lamp for wall mounting fitting\ Holder all as specified and directed .

S&F LED Integrated Batten aesthetically designed linear mirror LED light fitting of 07 Watt 1' white, indoor decorative PVC extruded provided with a high output PMMA diffuser for glare free light LED batten integrated type complete all as specified and directed.

Supply and fixing metal body exhaust fan 300 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size and making good the disturbed surface of wall with OBD/White wash to match with existing complete all as specified and directed Note : Existing old u/s Exhaust fan to be deposited in MES store.

Taking down of existing tube light fitting/holder/wall/mirror/ceiling light fitting and bldg. security light fitting any type and make all as specified and directed.

S&F LED Building security light fitting 30W in replacement on existing bracket complete all as specified and directed.

Supply and fix in replacement MCB DB SPN 8 Way with metal double door, (IP-43 Protection) flush mounting epoxy powder control having 200 Amps rated bus bar complete all as specified and directed.

Supply and fix in replacement MCB SPN C curve 32/40 Amps 240 Volts, 10 KA complete all as specified and directed.

Supply and fix in replacement MCB SP C curve 10 to 40 Amps 240 Volts complete all as specified and directed.

M&L for sub main wiring in replacement with two runs of 6 Sqmm size for main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked, drawn through existing steel/PVC concealed conduit complete all as specified and directed. Note: New conduit of suitable size with connected fittings will be laid, if there is damage/ blockage in existing conduit and the quoted rates are inclusive.

M&L for sub main wiring in replacement with two runs of 10 Sqmm size for main cable and one run of 10 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked, drawn through existing steel/PVC concealed conduit complete all as specified and directed. Note: New conduit of suitable size with connected fittings will be laid, if there is damage/ blockage in existing conduit and the quoted rates are inclusive.

ramveer Singh

NEELAM INTERIORS & EXHIBITIONS

S.K. ENTERPRISES