E-Quotation for 1) Construction of a New Court Building in Chalisgaon, Dist. Jalgaon., 2) Construction of a Total of 16 Residential quarters in Chalisgaon, Dist. Jalgaon.

E-QUOTATION For

Lady Justice Sculpture (Law & Judiciary Symbol) – FRP Providing, fabricating, supplying and installing Lady Justice Sculpture (Symbol of Law & Judiciary) of 1.80 m (approx. 6 ft) height made of Fibre Reinforced Plastic (FRP) including modelling, moulding, casting, finishing and fixing complete as per approved design and direction of Engineer-in-Charge. The work shall include artistic modelling of the Lady Justice figure (with balance scale and sword) using special Shadu clay to achieve proper proportions and detailing. After approval of the model, waste mould shall be prepared in Plaster of Paris (POP) reinforced with 2" × 2" wooden batten strips or bamboo supports for adequate strength during casting. The final casting shall be carried out in FRP (ISO grade) using mixture of resin, cobalt and hardener, reinforced with FRP mat in minimum two layers, maintaining uniform thickness of 5 mm to 10 mm for durability and structural stability. After casting, the surface shall be cleaned using nitric acid and water treatment to prepare the surface for finishing. The cleaned surface shall be provided with one coat of grey aster primer applied with air compressor spray machine. The sculpture shall then be painted with PU based decorative paint in minimum 2 to 3 coats, and the finished surface shall be protected with clear PU protective coating for long-term weather resistance. The item shall include transportation, handling, installation on pedestal/base frame with necessary anchoring arrangement, fixing with MS supports/bolts wherever required, finishing, cleaning and making the sculpture ready for display complete in all respects as directed by the Engineer-in-Charge.

Decorative Fountain with Lady Justice / Law Book Statue (FRP) Providing, fabricating, supplying and installing Decorative Fountain with central statue of Lady Justice (Law & Judiciary Symbol) or Law Book, complete in all respects including civil work, FRP sculpture, water circulation system, finishing and installation as per approved design and direction of the Engineer-in-Charge. The work shall include artistic modelling of Lady Justice figure (with balance scale and sword) or Law Book symbol using special Shadu clay for detailed sculptural form. After finalization of the model, a waste mould shall be prepared using Plaster of Paris (POP) reinforced with 2" × 2" wooden batten strips or bamboo supports for structural stability during casting. The final casting of sculpture shall be done in FRP (ISO grade) using a mixture of resin, cobalt and hardener, reinforced with FRP mat in minimum two layers, maintaining uniform wall thickness of 5 mm to 10 mm. The cast surface shall be cleaned using nitric acid and water treatment to prepare it for finishing. After cleaning, the sculpture surface shall be provided with one coat of grey aster primer applied with air compressor spray machine, followed by 2–3 coats of PU based decorative paint. The final surface shall be protected with clear PU protective coating to ensure durability and weather resistance. The work shall also include construction of decorative fountain basin in RCC / masonry structure, waterproofing treatment, plastering and finishing with granite / stone / tile cladding as approved, including water circulation system consisting of submersible pump, pipeline, fountain nozzles, control valves and necessary electrical connections for proper fountain operation. The item shall further include installation of the FRP statue at the centre of the fountain with suitable MS frame / anchoring arrangement, testing of fountain system, finishing, cleaning and commissioning complete as directed by the Engineer-in-Charge.

Coper/ Brass Enameling

Coper Repose / Brass Repose

Portrait of Law Lady Oil on Canvas Reference Collection, Sketching & Composition, Layering & Detailing, Varnishing & Framing (5' x 3')

Portrait of Law Lady Bronze Round Sculpture Armature of statue (main internal structure of statue) Clay Modelling work of Statue( Modelling in shadu clay as per character and pose of statue) Plaster Mould ( POP diy on Final Clay work of fiber casting) Fiber Casting ( Casting in fiber glass ISO resin) Metal Casting ( plaster piece mould, wax copy, wax copy finishing, core mould, core molding baking and final bronze metal casting) Metal Brazing and Finishing ( finishing of statue) Oxidising ( Chemical treatment for surface colour) Transportation (transportation material, metal casting process, and for final installation. (8' Heigth)

Portrait of Law Lady Bronze Round Sculpture Size. Armature of statue (main internal structure of statue) Clay Modelling work of Statue( Modelling in shadu clay as per character and pose of statue) Plaster Mould ( POP diy on Final Clay work of fiber casting) Fiber Casting ( Casting in fiber glass ISO resin) Metal Casting ( plaster piece mould, wax copy, wax copy finishing, core mould, core molding baking and final bronze metal casting) Metal Brazing and Finishing ( finishing of statue) Oxidising ( Chemical treatment for surface colour) Transportation (transportation material, metal casting process, and for final installation. (6' Heigth)

Vinyl Print with Design Conceptual designing and research team Designing and Working Drawing Preparation HP High Quality Long Durability Print with Stander Media Qty. 4000 Sqr. Ft.

Vinyl Print with 3mm Sunboard with Design Conceptual designing and research team Designing and Working Drawing Preparation HP High Quality Long Durability Print with Stander Media

Providing and fixing newasa stone cladding in ashlar fine masonry in cm 1:3 with applying adhesive chemical for outer wall including scaffolding and as per direction of engineer incharge etc complete.

Providing coursed rubble stone paving of 8 inch stone for pathway in the bed of cc M-15, joints of stone is 2 inches for each joint and in the joints garden soil should be insert in 5 inch layer and on the garden soil joint lay Mexican Grass and directed by engineer in charge etc. complete

Slab Moulding Applications (Decorative) Providing and fixing decorative slab moulding to RCC slab edges, beams or ceiling portions using cement mortar / FRP / POP moulded profiles of approved design and pattern, including preparation, fixing, finishing and painting complete as per approved drawings and direction of the Engineer-in-Charge. The work shall include surface preparation of the RCC slab edge, applying bonding agent where required and fixing pre-cast moulded profiles or in-situ moulding using cement mortar mix (1:3) / POP / FRP decorative sections as per approved pattern. The moulding shall be properly aligned and finished to required shape and profile, including making smooth edges, joints and surface finishing. After fixing, the surface shall be finished with putty, primer coat and two coats of approved paint or colour finish to match the surrounding surface. The item shall include all materials, labour, scaffolding, finishing, curing and cleaning complete in all respects as directed by the Engineer-in-Charge

Stamped Concrete Flooring Providing and laying Stamped Concrete Flooring of approved design, pattern and colour including surface preparation, concrete laying, stamping, colouring, finishing and curing complete as per approved drawings and direction of the Engineer-in-Charge. The work shall include preparation of subgrade, laying and compacting PCC base layer of required thickness, and providing M20 grade concrete topping of required thickness with proper leveling and finishing. While the concrete is in plastic condition, approved texture mats / moulds shall be used to imprint decorative patterns such as stone, brick, tile or cobble design to obtain stamped concrete finish. The stamped surface shall be treated with colour hardener and release agent to achieve the required decorative effect. After imprinting and initial setting, the surface shall be cleaned and finished properly, followed by application of protective sealant coat to improve durability, colour retention and weather resistance. The work shall include all materials, labour, equipment, curing, finishing, cutting of expansion joints where required, and cleaning of finished surface complete in all respects.

Providing and fixing Glass Fiber Reinforced Concrete (GFRC) panels of 30 mm thickness, manufactured with cement, alkali-resistant glass fibres (3-5%), fine aggregates, polymer modifiers and approved additives, including casting, curing, finishing, transportation, erection and fixing complete as per Engineer-in-Charge.

Providing and fixing Glass Fiber Reinforced Concrete (GFRC) panels of 40 mm thickness, manufactured with cement, alkali-resistant glass fibres (3-5%), fine aggregates, polymer modifiers and approved additives, including casting, curing, finishing, transportation, erection and fixing complete as per Engineer-in-Charge.

Providing and fixing Glass Fiber Reinforced Concrete (GFRC) panels of 60 mm thickness, manufactured with cement, alkali-resistant glass fibres (3-5%), fine aggregates, polymer modifiers and approved additives, including casting, curing, finishing, transportation, erection and fixing complete as per Engineer-in-Charge.

Providing and fixing Glass Fiber Reinforced Concrete (GFRC) panels of 100 mm thickness, manufactured with cement, alkali-resistant glass fibres (3-5%), fine aggregates, polymer modifiers and approved additives, including casting, curing, finishing, transportation, erection and fixing complete as per Engineer-in-Charge.

Providing first class brick masonry using Godhra bricks in cement mortar 1:4, including necessary scaffolding, proper bonding, racking out joints and pointing in cement mortar 1:3, watering, curing and finishing complete. The work shall be executed in pillars of curved shape as per approved drawings or as directed by the Engineer-in-Charge, including all materials, labour and incidental works required for proper completion of the masonry work.

Decorative Slab Cornice Moulding Providing and casting decorative slab cornice moulding in M30 grade cement concrete up to various thickness to RCC slab edges, beams or ceiling portions in approved shape and profile, including necessary centering, shuttering, compacting, finishing and curing, complete as per approved drawings or as directed by the Engineer-in-Charge. 150mm

HIP TWISTER (TRIPLE) Length :- 1000mm • Width :- 600mm •!:!eight :-1200mm • Safe Area :-3.0meter x1 .?meter • HIP TWISTER equipment made up of "B"class GI pipe o different NB. NB stands for Nominal boar size i.e. Internal diameter of pipe in millimeters. • Make of GI Pipe will be of Tata, Jindal , Swastik . •[he main frame pipe is 114mm NB. • l:landle frame is madeup of 42mm NB. •[he connecting pipe is made of 32mm NB. • To build bushes are used are seamless pipe of 60mm 0[ &6mm thickness. • The foundation for fixing is structure and made form center pipe of G.I. of 114 NB. Main pipe supported with 25mmx 25mm m.s angle of 3mm thickness. • The seat and back rests are fitted on the outer frame arE made up of high quality of fiber plastic material of size 335mmx31 0mmx3mm thickness. Pins are used ot dia and 1 1 mm are up of MS bright material. • Base plate are made up of ms round plate 0250. • Bearing Closing caps are made op of high Quality fibe1 plastic material. • High tensile steel with galvanized nuts & bolts are usec for assembly. • The bearing are used "6205" & "6203" permanent lubricated bearings. Bearings are used reputed brand (SKF/FAG). • The cerciips A24 &A16 used for assembly • The powder coating is done with pure poiyster powder o ackzonobie or berger with 60to70 micron thickness. As per Sanctioned Rate

AIR WALKER DOUBLE • Length :- 1100mm • Width :- 400mm • Height :-1200mm • Safe Area :-2.8 x 1.4 meter • AIR WALKER DOUBLE equipment made up of "B"class GI pipe of different NB. NB stands for Nominal boar size i.e. Internal diameter of pipe in millimeters. • Make of GI Pipe will be of Tata, Jindal , Swastik . • The main frame pipe is 114mm NB. • The main outer frame is 32mm NB made from «B" class of G.I. pipe. • Footrest MS. Square pipe is 50x50mm. • The pins used are made up of MS bright material 025mm. • The seat and back rests are fitted on the outer frame are made up of high quality of fiber plastic material of size 335mmx31 Ommx3mm thickness. • To build bushes are used are seamless pipe of 60mm OD &6mm thickness. • The footrest made from aluminum casting material 125x305x5mm thick. With the support of 250mm x100mm x3mm thick MS plate. • The footrest frame is made of 32mm NB of "C" class of G.I. pipe. • The foundation for fixing is structure and made fonn center pipe of G.I. of 89 NB. Main pipe supported with 25mmx 25mm m.s angle of 3mm thickness. • Base plate are made up of ms round plate 0250. • Closing caps are made op of high Quality fiber plastic material. • High tensile steel with galvanized nuts & bolts are used for assembly. • The bearing are used "6205" permanent lubricated bearings. • The cerclips A24 used for assembly The powder coating is done with pure polyster powder of ackzonoble or berger with 60to70 micron thickness. As per Sanctioned Rate

ARM WHEEL DOUBLE • t:ength :- 600mm • Width :- 900mm •!:!eight :-1500mm • Safe Area :-1.9 x 1.9 meter • ARM WHEEL DOUBLE made up of "B"class GI pipe o• different NB. NB stands for Nominal boar size i.e. Internal diameter of pipe in millimeters. • Make of GI Pipe will be of Tata, Jindal , Swastik . • The main frame pipe is 114m NB. • The ring frame is 32mm NB made from "B" class of G.I pipe. • Ring Connectin link is made up of 25mm NB & of "B' class of G.l.pipe. • The pins used are made up of MS bright material 025mm. • To build bushes are used are seamless pipe of 60mm O[ &6mm thickness. • The foundation for fixing is structure and made form center pipe of G.I. of 89 NB. Main pipe supported with 25mmx 25mm m.s angle of 3mm thickness. • Base plate are made up of ms round plate 0250. • Closing caps are made op of high Quality fiber plastic material. • High tensile steel with galvanized nuts & bolts are usec for assembly. • The bearing are used "6201zz"& "6205zz" permanent lubricated bearings. • The cerclips A24 used for assembly The powder coatini is done with pure polyster powder of ackzonoble or berger with 60to70 micron thickness. As per Sanctioned Rate

ELIPTICALE CROSS TRAINER • Length :- 1700mm • Width :- 600mm • Height :-1200mm • Safe Area :-3.0meter x1 .?meter • ELIPTICALE CROSS TRAINER equipment made up of "B"class GI pipe of different NB. NB stands for Nominal boar size i.e. Internal diameter of pipe in millimeters. • Make of GI Pipe will be of Tata, Jindal , Swastik . • The main frame pipe is 114mm NB. • Handle frame is madeup of 42mm NB. • The connecting pipe is made of 32mm NB. • To build bushes are used are seamless pipe of 60mm OD &6mm thickness. • The foundation for fixing is structure and made form center pipe of G.I. of 114 NB. Main pipe supported with 25mmx 25mm m.s angle of 3mm thickness. • The seat and back rests are fitted on the outer frame are made up of high quality of fiber plastic material of size • Pins are used of diameter 25mm and 17 mm are made up of MS bright material. • Base plate are made up of ms round plate 0250. • Bearing Closing caps are made op of high Quality fiber plastic material. • High tensile steel with galvanized nuts & bolts are used for assembly. • The bearing are used "6205"& "6203" pennanent lubricated bearings. Bearings are used reputed brand (SKF/FAG). • The cerclips A24 & A 16 used for assembly The powder coating is done with pure polyster powder of ackzonoble or berger with 60to70 micron thickness. As Per Sanctioned Rate

PUSH CHAIR (SINGLE) • Length:- 1800mm • Width :- 700mm • Height :-2000mm• Safe Area :-1.9 x 1.9 meter • PUSH CHAIR (SINGLE) made up of "B"class GI pipe of different NB. NB stands for Nominal boar size i.e. Internal diameter of pipe in millimeters. • Make of GI Pipe will be of Tata, Jindal , Swastik . • The main frame pipe is 89m NB. • The ring frame is 32mm NB made from "B" class of G.I. pipe. • Ring Connectin link is 25mm NB made up of "B" class of G.l.pipe. • Wheel connecting pipe is 32 mm NB made of "B" class of G.I. pipe. • The pins used are made up of MS bright material 025mm. • To build bushes are used are seamless pipe of 60mm OD &6mm thickness. • The foundation for fixing is structure and made fonn center pipe of G.I. of 89 NB. Main pipe supported with 25mmx 25mm m.s angle of 3mm thickness. • Base plate are made up of ms round plate 0250. • Closing caps are made op of high Quality fiber plastic material. • High tensile steel with galvanized nuts & bolts are used for assembly. • The bearing are used "6205zz" permanent lubricated bearings. • The cerclips A24 used for assembly The powder coating is done with pure polyster powder of ackzonoble or berger with 60to70 micron thickness. As Per Sanctioned Rate

SHOLDER PRESS • tength :- 1800mm • Width :- 700mm •!:!eight :-2000mm • Safe Area :-2.0meter x 1.8meter • SHOLDER PRESS equipment made up of "B"class GI pipe of different NB. NB stands for Nominal boar size i.e. Internal diameter of pipe in millimeters. • Make of GI Pipe will be of Tata, Jindal , Swastik . • The main frame pipe is 89mm NB. • l:landle frame is madeup of 32mm NB. • Ebotrest MS. Square pipe is 40x40mm. • The pins used are made up of MS bright material 025mm. • To build bushes are used are seamless pipe of 60mm O[ &6mm thickness. • The footrest made from aluminum casting material 125x305x5mm. With the support of 250mm x100mm x3mm thick MS plate. • The foundation for fixing is structure and made form center pipe of G.I. of 114 NB. Main pipe supported with 25mmx 25mm m.s angle of 3mm thickness. • Base plate are made up of ms round plate 0250. • Closing caps are made op of high Quality fiber plastic material. • High tensile steel with galvanized nuts & bolts are usec for assembly. • The bearing are used "6205" permanent lubricated bearings. Bearings are used reputed brand (SKF/FAG). • The cerclips A24 used for assembly The powder coating is done with pure polyster powder of ackzonoble or berger with 60to70 micron thickness., As per Sanctioned Rate

LEG PRESS (DOUBLE) • DIMENSIONS: - 1800mm (Length) x 1500mm (Width) x 1700mm. (Height). • SAFE AREA: - 2. 5Mtr.X 1.5Mtr. • LEG PRESS (DOUBLE) equipment made from "C" Class G.I. pipe of different NB. • The Center Pipe is of 100NB pipe. • The bottom welded with support of M.S. round plate of 0248 mm & 9mm thickness. • The bottom frame is of 32NB pipe. • The handle frame is of 25NB pipe. • The foundation used for fixing is a structure and made from center pipe of 80 NB pipe welded with M.S. round plate of 0248 mm & 9mm thick. Main pipe supported with 23 mm X 23mm M.S. angles of 1.8 mm thickness and 19mm x 39mm MS square pipes of 1.8mm thickness. • The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 298mm and 9mm thick. Closing Caps are made up of high-quality HDPE/LLDPE material. • Pins used of Diameter 35 mm are made up from bright material. • The bearings used are of "6007" permanent lubricated sealed bearing of reputed High tensile steel with galvanized nuts and bolts are As Per Sanctioned Rate

PUSH UP BAR • Length :- 1500 Mtr. • Width :- 600 Mtr. • Height :- 500 Mtr. • Safe Area:- • PUSH UP BAR equipment made up of "B"class GI pipe of different NB. NB stands for Nominal boar size i.e. Internal diameter of pipe in millimeters. • The main frame pipe is 60mm NB. Is made up of "B" class of G.I. pipe. • Body rest pipe are made up of the 42mm NB of "B" class of G.I. pipe. • Handle base pipe is 42mm NB. • Body rest support pipe is made of 42mm NB. • Middle support pipe is made up of 32mm NB of "B" class of G.I. pipe. • The seat and back rests are fitted on the outer frame are made up of high quality of fiber plastic material of size 335mmx31 0mmx3mm thickness • Footrest MS. Square pipe is 50x50mm. • The footrest made from aluminum casting material 125x305x5mm. • Base plate are made up of ms round plate 0250. • High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating is done with pure polyster powder of ackzonoble or berger with 60to70 micron thickness. As per Sanctioned Rate