Construction of HyTeC Building

Excavation and refilling of available excavated soil for foundation as per drawing.Based on soil report we have assumed that hard strata will be available at a maximum depth of 8 feet

Supply and Fiiling of Gravel Available/Brought from Outside for Basement upto 1'6" Height

ATT Works at Foundation and Basement Levels

Providing and Laying of Reinforced Cement Concrete M20 Grade at all Levels

Providing and removing formworks with 12mm Plastic coated plywood so as get form finish with necessary wooden fame work, bolts, nits etc., with necessary supports including chemical releasing agent to avoid sticking of cement on the plywood at all heights, Levels to cast the member of any shape, size and complete and removal of formwork

Supplying, fabricating and fixing in position MS bars confirming to IS-432/High Yield strength deformed bars (Tor steel) confirming IS-1786 of Fe 500/550D grade of all dia for reinforcement in all RCC in situ works including Footing, Pedestal, Plinthbeam, Flooring works, Mezzanine Deck Florring works and heights including cost of straightening, cutting bending to shape fabricating and tying with 18G binding wire, providing and fixing cement cover blocks, wherever necessary etc., all complete as per drawings and specifications. The Rate to include cost of binding wire, cement cover blocks, all cuts and waists which will not be measured. Only laid weights will be measured including authorized laps

Supply, fabrication and erection in postion of Main Structural Members Columns & Truss using Rectangular & Square Hollow Sections(E250 Grade) and MS Plates(E250 Grade) for Base plates, Connection plates, Cold-formed 'C'purlins and anchor bolts, as per the approved drawings, design and specifications. The work includes one coat of zinc chromate primer and two coats of enamel paint, transportation, loading, unloading, necessary cranes for erection etc., required to complete the work.

Supply and fixing of profile colour coated galvalume 0.47mm thickness GI (curved) 550Mpa sheets for ROOFING as per approved drawing and colour with necessary sealant, EPDM metals washers, Bolts and nuts etc., to complete, method of measurement shall be based on the actual visible area and the rate includes the required lapping of sheets. Also to be included is a layer of soundproofing under the GI sheet with PUF panel or rockwool, to reduce sound and improve heat proof.

Supply and fixing of profile colour coated galvalume PUFF PANEL 100 mm thickness 550Mpa sheets for CLADING as per approved drawing and colour with necessary sealant, EPDM metals washers, Bolts and nuts etc., to complete, method of measurement shall be based on the actual visible area and the rate includes the required lapping of sheets.

Supply and laying of 1.0mm thick Decking sheet(JSW)

Supply and fixing of profile colour coated galvalume 0.47mm thickness 550Mpa sheets for ACCESSORIES (corner flashing, drip flash,down take pipe,gutters) as per approved drawing and colour with necessary EPDM washers, bolt and nuts, sealant, etc , required to complete the work, method of measurement shall be based on the actual visible area and the rate includes the required lapping of sheets.

Windows-UPVC Sliding Windows

MS Rolling Shutters

Providing and Laying of Vetrified Tiles of approved makes using C.M 1:5 with proper grouting

Providing and Laying of ACP Works

Providing and Laying of False Ceiling at Roof

LDPE sheet of thickness 8mm used for waterproofing in basement

WIRING WORKS

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

6 amps. socket controlled by 6 amps. one way switch

6/16 amps. socket controlled by 16 amps. one way switch

8 module POP UP Box comprising 5A CS Plug- 2Nos, Data Point -2 Nos

100mm x 50mm

50mm x 50 mm

2 runs of 2.5 sq.mm and 1 run of 2.5 sqmm cable

2 Runs of 6.0 sq.mm and 1 run of 6sq.mm cable

4 runs of 10.0 sq.mm and 2 runs of 6 sq.mm cable

4 way (4+12)three phase and neutral (double door MCB type)

8 way (4+24) three phase and neutral (VTPN double door MCCB type)

36 kA,125 amperes 4 pole MCCB

6 - 32 Amperes Single pole MCB

32A Triple pole MCB

63A four pole Isolator

20A 1Φ MC Plug and Socket controlled by 20A DP MCB ( 3 PIN Socket and DP MCB will be in separate enclosures at different locations)

32A 3Φ MC Plug & Socket controlled by 32A TPN MCB

600 x 600 mm recessed / surface mounted VECTOR IV LCTLRF4-36-CDL LED Light firring or equivalent

DLYT CDR 219-18-57-SL NWH recessed/ surface mounted led Light fitting or equivalent

PROXIMA-R CDR 216-40-57-SL NWH recessed / surface mounted LED light fitting or equivalent

FLME SPOT CDR211-06-30-SL-NWH recessed/ surface mounted LED Fitting or equivalent

ROVER PLUS TFS 504-70-57-60D-SL-GL-NSG LED Fitting or equivalent

ORBIT CDS-201-20-57-HL2 NWH LED Fitting or equivalent

Infina compact 360 degree rotation focus 18W- 20W LED Track lighting on the existing rail with necessary connections.

Supplying and fixing of TRACK RAIL for fixing of light fittings on the existing truss with necessary clamps including welding works if necessary.

Supplying and fixing of 16mmx16mm Flexible Neon Silicon Profile Light - Front Bend IP65 24V STRIP/ ROPE LED Lighting 20W-25W per metre on the existing truss with suitable clamps and welding works if necessary

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. Single run of cable

Single run of cable

2 runs of cables

Supplying and fixing of following sizes of medium class PVC conduit alongwith accessories in surface/recess or cutting the wall and making good the same in case of recessed conduit as required. 25mm

4c x 16 sq.mm XLPE insulated armoured aluminium cable.

3.5c x 50 sq.mm XLPE insulated armoured aluminium cable.

3.5c x 150 sq.mm XLPE insulated armoured aluminium cable

4c x 16 sq.mm

3.5c x 50 sq.mm

3.5c x 150 sq.mm

Supply,Installation, testing and commissioning of 300mm x 50mm x1.6 mm MS powder coated Perforated Cable Tray for Data and voice/Electrical Cable with suitable number of threaded rods of L angle support fro the existing Truss with Anchor fasteners, Clamps, bolts,nuts including all the necessary welding works etc., to suit site conditions as required

Earthing with GI earth plate 600x600x6 mmthick including acessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7m long etc with charcoal/coke and salt as required.

Single run of 8 SWG bare copper conductor with neccessary end connections

Single run of 8 SWG bare copper conductor with neccessary end connections

Collecting from stores, shifting to the place of installation and fixing and commissioning of White colour, make and model vitreous china rectangular wash basin GI rag bilts, 15 mm dia CP pillar cock 32mm dia CP waste coupling with plug and chain and including PVC connecting pipe, 32mm dia CP brass bottle trap, one no of 15mm dia CP angle stop cock with wall flange. The works shall include cutting in wall and making good the walls & floors. Notes: Conditions mentioned in item no.1 shall be applicable includes supply and fixing

Collecting from stores, shifting to the place of installation and fixing of White colour, make and model and size viterous china concealed soap dish including cutting and setting in walls with white cement joints making good of walls. Notes: a) Conditions mentioned in item no.1 shall be applicable includes supply and fixing includes supply and fixing

Collecting from stores, shifting to the place of installation and fixing of 600mm long 25mm dia CP brass superior quality towel rail with brackets, and flange with concealed brass screws etc., including cutting & making good the walls. Notes: Conditions mentioned in item no.1 shall be applicable

Collecting from stores, shifting to the place of installation and fixing of 15mm dia CP angle stop cock with wall flange etc.(for aqua guard point in Each floor),

20 mm dia (SDR-11)

es confirming to ASTM standard including all CPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 2 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, foundations and RCC slabs, making good the walls and bores in CC or CM 1:3 as applicable clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors. Note: Strictly use SDR-11 grade ASTRAL - CPVC pipe and fittings for internal hot water supply up to 50 mm dia. INTERNAL (CONCEALED IN WALL):COLD WATERSUPPLY

Providing, fixing testing and commissioning of CPVC ball valves (Astral / Ashirwad make) including unions etc., Complete

Part C: PVC SOIL,WASTE,VENT PIPES AND FITTINGS ( INTERNAL & EXTERNAL) Providing, fixing, testing and commissioning of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 4 kg / sq.cm pressure rated including all fittings, like Bends, Tees, Elbows, Collars, junction, offsets, access pipes, jointing with solvent cement followed by application of leak proof adhesive like FRP paste & laid on floors inside the toilets kitchen and utility to the required slope including making necessary bores in walls as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete. Notes: Wall chasing shall be done with chasing machine to required lines and levels. INTERNAL (TOILET & KITCHEN):

75mm dia (4kg/sq.cm pressure rated)

110mm dia (4kg/sq.cm pressure rated)

Providing, fixing, testing and commissioning of ready made PVC gully trap (ISI brand only) of 100 x 100 mm size with 100 mm dia outlet. and also providing suitable size of cast iron grating, including 40 mm thick precast ready made light duty RCC cover slab, clearing the surplus material, earth etc. complete.

100mm x 100mm size `P/S' trap

Set Cu.m