Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 478 3 834004 | RANCHI | JHARKHAND | 834004 | Admitted-Finance |
| 2 | Admitted-Finance VILLAGE HARMDANGANJ PO DALTONGANJ DISTRICT PALAMU JHARKHAND 822101 | DALTONGANJ | PALAMU | JHARKHAND | 822101 | Admitted-Finance |
Tender Value
₹61.9 L
EMD Value
₹1.2 L
Closing Date
16 May 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Nodal Officer
e Procurement Cell, Office of the Superintending Engineer, Building Construction Department, Circle No.-2, Combined Building, Line Tank Road, Ranchi-834001
Construction of 06 six Class Rooms in KGBV Panki Under Block Panki at Daltonganj, Dist-Palamu,For the Year 2023-24.
2023_BCD_70706_1
05/BCD/CIR-2/DALTONGANJ
Open Tender
Civil Works - Buildings
Works
180 days
Palamu
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
EE, BCD, Building Division, Daltonganj
₹1.2 L
Yes
17 Jun 2023
10 May 2023
17 May 2023
10 May 2023
16 May 2023
10 May 2023
Amount
Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item –A) and disposal of excavated earth as obtained to a distance up to 50 M. Trenches , removing roots of trees , shrubs all complete as per approved design, Building specification and direction of E/I.
Extra for earthwork in hard soil as per specification and direction of E/l (vide classification of soil item-B)
Providing coarse clean sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm. Thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).
Providing designation 75 B one brick flat soling joints filled with local sand including cost ofWatering, taxes, royalty, all complete as per building specification and direction of E/I.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level: 1:3:6(1 cement: 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level: 1:2:4(1 cement: 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
Providing designation 75B Brick work in C.M.(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints cost of screening carriage of materials, raking out joints to 15mm. depth , curing , taxes and royalty all complete as per building specification and direction of E/I.
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level: 1:1.5:3(1 cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
Providing designation 75B Brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints cost of screening, carriage of materials, scaffolding, raking out joints to 15mm. depth , curing , taxes and royalty all complete as per building specification and direction of E/I.
Reinforced cement concrete work in lintel and lintel band.......do.....do…......E/I
Reinforced cement concrete work in columns.......do.....do....E/I
Reinforced cement concrete work in beam and chhajja .......do.....do…......E/I
Providing Tor Steel Reinforcement…...do...do…...E/I
8 mm dia
10 mm dia
12, 16, 20/25 mm dia
Providing and fixing fan hook of 16mm. dia M.S. bar, 1 meter long bent to required size and shape, placed in position and fixed in the R.C.C. slab/Beam at the time of casting all complete as per building specification and direction of E/I.
Supplying, fitting and fixing M.S. grill made of 20mm x 6mm M.S. flat asper approved desing and drawing, properly fabricated with joints continuous fillet, welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.
Supplying and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial steel ...........do…..........do….........E/I.
Supplying, fitting and fixing 35mm thick solid core type non - decorative single leaf flush door and window shutters with block board core blended with high quality phenol formal dehydes synthetic resin of standard make with Aluminum fitting such as hinges, tower bolts, handles, cleats and sand blocks taxes all complete as per building specification and direction of E/I.
Supplying, fitting and fixing 20 guage G.C.I. sheet gate fitted on M.S. Angle frame of size 60mm x 60mm x 6mm. including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in C.C. (1:2:4) block of required size applying a priming red lead paint over steel work, taxes all complete as per drawing, specification and direction of E/I.
Providing 6mm. cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.
Providing 12mm. cement plaster (1:6) with clean coarse sand of F.M. 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.
Providing 25mm. thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19mm. thick (1:2:4) with 12mm. to 6mm size graded stone chips, and top layer 6mm. thick (1:2) with 6mm. down stone chips in panels, including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty all complete as per specification and direction of E/I.
Providing 1.5mm. cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes , channels , plates etc. , including welding, grinding, buffing, polishing…......do…....do…....E/I.
Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer, over new surface including preparing the plasted surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding, washing of floors, all taxes all complete as per building specification and direction of E/I.
Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding, curing and all taxes, all complete as per building specification and direction of E/I.
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thououghly, scaffolding and taxes all complete as per building specifications and direction of E/I
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
Earth work in filling in foundation trenches and plinth in layers not exceeding 150mm. Thick well watered, rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 Mtr . and lift of 1.5 Mtr. All complete as per building specification and direction of E/I.
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc., including edges
Carriage of Materials from nearest approved sources to work site including loading, unloading all complete job.
(i) Sand Lead - 10 Km
(ii) Stone Chips Lead - 22 Km
(iii) Bricks Lead - 8 Km
Point wiring in PVC conduit, with pano type switch :- Wiring for light point/fan point/exhaust point/call bell point, with 1.5 sq.mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, piano type switch, phenolic laminated sheet with suitable size PVC/MS box as required.
Power plug wiring in PVC conduit (2 x 4 sq. mm) :- Wiring for light plug with 2 x 4 sq.mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC PVC conduit along with 1 Nos. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required.
"S/F Piano type switch /socket :- Supplying and fixing of following piano type switch/socket on the existing switch box/cover including connections etc. as required.
5/6 amps, one way switch
3 pin 5/6 amps, socket outlet
Wiring for Circuit/submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.
2x1.5 sq.mm + 1x1.5 sqmm earth wire
2x2.5 sq.mm + 2.5sqmm earth wire
Supplying and Fixing Piano type Switch/Socket on existing Switch Box/Cover including connection etc. as requared. Electronic step fan regulator, mini
S/F power plug point with piano type accessories:- Supplying and fixing suitable size GI/PVC box of 121 mm x 173 mm x 48 mm/ (6'' x 8'') (nominal size) on surface or in recess with suitable size of phenolc laminated sheet cover in front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps piano type switch connection, panting etc, as required.
S/F ceiling rose:- Supplying and fixing 2pin 5amp.ceiling rose on the existing junction box wooden block including conection etc. as required.
S/F Batten holder :- Supplying and fixing batten holder / angle holder including connection etc.as required.
Supply Installation ,testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard lenth (upto 30cm) with 1.5Sq mm. FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required.
1200mm(48") Ceiling Fan
Supplying and fixing of following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bars, neutral bus bar, earth bar, din bar, interconnection, power painted including earthing etc .as required (But without MCB/ RCCB/Isoator)
6 Way.Single door
Supplying and fixing 6amps to 32 amps, rating, 240 volts,KB ,"B" curve miniature circuite breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing the commissioning etc. as required .
6/32 amps single pole, "B" series
S/F DP MCB isolator :- Supplying and fixing followng rating, double pole ,240volts, solator in the existing MCD DB complete with connections,testing and commissioning etc as required.
S/F rewireable double pole/TP&N Switch disconnector :- Providing and fixing following DP/ TP& N Sheet metal swtch disconnector fuse unit in the existing metal board with rewirecable type fuses, including drilling holes in metal board, making connections, etc as required.
32 amps,double pole
Laying of 1 number PVC insulated and PVC sheathed/XLPE power cable of 1.1kv grade of size not exceeding 35 sq.mm direct in ground including excavation sand cushioning, protective covering and refiling the trench etc as required.
S.I.T.C. of following rating surface mounted LED tube light fitting suitable for 230V 50 Hz, single phase supply etc. complete as required.
10/12W LED Tube light
Supplying ftting and fxing 9/10 Watt LED Bulb as required.
Earthing with G.I earth pipe 4.5mtr long 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
Providing and fixing 25mm x 5mm G.I. strip in 40mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re- filling etc. as required.
Add 18 % GST (in Basic Rate must fill 12)
Add 1% Labour Cess (in Basic Rate must fill 1)
M/S AVINASH KUMAR
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .