Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 CrAccepted-Finance | ₹5.9 Cr | L1 | Accepted-Finance L1 bidder |
| 2 | L2₹5.9 CrAccepted-Finance CHINAR COMMERCIAL COMPLEX THE BUND RESIDENCY ROAD SRINAGAR 190 001 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190001 | ₹5.9 Cr | L2 | Accepted-Finance L2 bidder |
| 3 | L3₹6.0 CrAccepted-Finance 260 RITAMBARA BUILDING TRIBHUWAN COMPLEX ISHWAR NAGAR WEST NEW DELHI 110 065 | ₹6.0 Cr | L3 | Accepted-Finance L3 bidder |
| 4 | L4₹6.5 CrAccepted-Finance | ₹6.5 Cr | L4 | Accepted-Finance L4 bidder |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Others-Insufficient Expereince regarding PQC and similar works. |
Updated dates
Tender Value
₹8.5 Cr
EMD Value
₹17.0 L
Closing Date
9 Feb 2026, 4:00 pmClosed
Chief Engineer Srinagar Smart City Ltd
1st Floor Budshah Building Lal Chowk
Development of e-Bus Depot for 100 No. e-Buses under PM e-Bus Sewa at Bemina, Srinagar.
2026_SSC_300576_1
E-NIT No. 60-SSCL of 01-2025-26, Dt 14/01/2026
Open Tender
Civil Works
180 days
E-Bus Depot Bemina
Refer to Bid Document
3 documents required · 3 mandatory
₹17,000
CEO Srinagar Smart City Ltd
₹17.0 L
Office of CEO Srinagar Smart City Ltd
7 Mar 2026
14 Jan 2026
10 Feb 2026
14 Jan 2026
9 Feb 2026
14 Jan 2026
24 Jan 2026
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix)
Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
Dismantling and stacking within 50 meters lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of T or L iron or pipe
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth, lead upto 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil :
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
Supplying & laying of bi-axial extruded high modulus polypropyleneGeogrid conforming to MORTH SPECIFICATION for base/sub-base reinforcement having minimum tensile strength 30kN/m in the longitudinal and transverse direction, with 10.5kN/m and 21kN/m tensile strength at 2% and 5% strain respectively in the longitudinal and transverse direction, junction efficiency not less than 95% and with 38mm X 38mm mesh opening.
Disposal of Lime, moorum, building rubbish upto 10 km Lead- Upto 10 Km
Consolidation of subgrade with power road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the subgrade.
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts,spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30.
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge
Construction of dry lean cement concrete sub base over a prepared subgrade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications,cement content not to be less than 150 Kg/cum, optimum moisture contentto be determined during trial length construction, concrete strength not tobe less than 10 Mpa at 7 days, mixed in a batching plant, transported tosite, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer-in-charge
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.
Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound. (The payment shall be made per m length of the joint having depth of 1 cm and width of I cm)
Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, leveling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in- charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to ,be paid separately) Note:-Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete prepared with batch mixing machine 16.51.2 Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer
Extra for Providing M-40 grade cement concrete instead of M-30 grade in including addition of plasticizers, with no loss of strength or durability. (Note : Cement content considered in M-40 is @ 400 kg/cum)
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge.
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Dismantling chain link fencing including MS iron posts, chain link mesh, flats , tension wire, clamps and all fittings ,complete including stacking of serviceable material and disposal of unserviceable material within 50m lead , as directed by Engineer incharge
Fixing of Dismantled chain link fencing including MS iron posts, chain link mesh, flats , tension wire, clamps and all fittings ,complete as directed by Engineer incharge
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture.
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Sides of Security Booth to be covered with Puff Board for a quantity of 91.08 Sqm)
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gram/m2
Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications
Supply and installation of Trolley Mounted portable fire extinguisher, Filled with MAP 50 ABC Dry Chemical Powder, Easy to use and refillable,Suitable for class A, B, C and Electrically Started Fire ISI Approved as per IS 15683, ISO, CE Approved Min. Discharge Time: 8 Seconds Working Temperature: -10 to 60 degrees Celsius of 50 kg.
Providing and Fixing Automatic Boom Barrier of required Boom Length 6.50 m consisting of a fixed Powder Coated stainless steel housing and White Powder Coated movable arm consisting of refractor strips and LED flashing lights on top, The housing shall contain the motor, spring and control unit with Frequency 50Hz, Water protection, IP protection -IP-55 , Operating time 9-11 secs with power Source 230V+/- 10% and environment temperature -10 to +50 degree C as per design and as directed by Engineer-In-Charge.
Providing and fixing any weather, colour coated, customized, automatic opening and closing, MS Sliding Gate of suitable width including all carriages. Colour and design of Gate to be approved by engineer in-charge complete job.
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
Providing and fixing Glow studs of size 100x20mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact Polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The Glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35 +/- 5 degrees to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS : 873 part 4 : 1973. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : 6.1.4 Cement mortar 1:4 ( 1 cement : 4 coarse sand)
12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)
Providing and fixing Powder coated Aluminium work with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the cieling to support the frame including necessary filling up of gaps at junctions, top, bottom, with required PVC , neoprene felt etc. Aluminium sections shall be smooth, rust free,straight, metered and jointed mechanically where ever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P brass / stainless stell screws all complete as per architectural drawings and the direction of engineer in charge with powder coated aluminium section. Pre laminated flat pressed three layer of graded wood particle board conforming ti IS: 12823 grade I type II in panelling of partition walls or with float glass panes of 5mm or higher thickness (Modi , Saint Gobain or equivalent) panelling of required height complete in all respects including all hardware fittings, shutters for doors etc as per directions of Engineer in charge.
Providing and fixing of Powder Coated Aluminium Window Shutters with 3.50mm thick glass pans in openings including cost of Powder Coated Aluminium Chowkats of approved size (50mm x 45mm), Powder Coated aluminium beadings, sliding channels where ever required, complete in finished form
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in- charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge)
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.
Providing, Supplying and laying in position stone soling on all levels.
Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate (20mm nominal size)- M15
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement-M20 (1:1.5:3)
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete
250 mm dia. R.C.C. pipe
150 mm dia. R.C.C. pipe- For Gully Chamber Connections
450 mm dia. R.C.C. pipe
300 mm dia. R.C.C. pipe
Providing and constructing RCC manhole Size 1.2 M x 1.2 M upto a depth of 2.0 M excluding excavation including foundation concrete 250 mm thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kg., including top slab in M25 RCC Grade and fixing in position steel fibre reinforced concrete ( SFRC) Frame and cover (EHD) of 560MM Dia. approved make including loading, unloading, transportation, all taxes, etc complete as directed by Engineering-incharge.
Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C.horizontal grating with frame complete as per standard design:
Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating. @ 15m Interval
Chamber size 110x50x77.50cm including precast R.C.C grating with frame 500x450 mmhorizontal and 450x100 mm vertical
Providing and fixing Tube Well including Boring with 100 mm diameter casing pipe upto a required depth(30 metre or more), including providing in position filters of G.I. pipe with brass strainer of approved quality, including placing in position hand pump of approved make, including cost of unions, including erecting minimum Three & above star rated submersible pump set of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 100 mm dia. borewell suitable for 35 to 120 LPM discharge at 144 to 35 m head & discharge & delivery pipe of Size-40 mm diameter with a necessary H type clamps.
Engineering, designing, procurement and construction of Effluent Treatment Plant (ETP) of MBBR technology and approved Brand including all civil works (UG RCC collection tank,treated water tank with waterproofing, Bar screen,OGT etc.), all electrical works & all mechanical works including tertiary treatment etc. for the building/campus/Bus depot for a plant size of 20 KLD including installation and commissioning. The Contractor shall submit the designs/drawings/specifications for the approval of the Engineer in charge. The payment shall be made after successful commissioning of the constructed ETPin all respects. Complete job
Ist year (warranty period)
2nd year
3rd year
*O&M covers repair/replacement of equipments like pipe,valves and fittings, belts,gas kits, wheels, electrical items (lights,fuses,lamps,heaters,UV, flow meters,ozonate,sensors),chemicals,pumps/dosing pumps,UPVC pipe and fittings,multipot valves and all other relevant items deemed necessary.
Engineering,designing,procurement and construction of Automatic 2-Brush Bus WashMachine of approved technology and Brand with Blaster System,Imported Brush & PLC Controller( (1-Washing Time 2 To 3 Minute, 2- High Pressure Nozzles Ss 304, 3- Imported Brush, 4-Plc Controlled, 5- Foaming Enabled, 6- Brushes Life 5000 Cycles Minimum, 7- Reputed Make Gear & Motors, 8- Reputed Make Electrical of appropriate technology including all civil works, all plumbing works, all electrical works & all mechanical works etc including installation and commissioning.The Contractor shall submit the designs/drawings/specifications for the approval of the Engineer in charge. The payment shall be made after successful commissioning of the constructed Automatic two brush Bus wash Machine in all respects. Complete job
Ist year (warranty period)
2nd year
3rd year
*O&M covers repair/replacement of equipments like pressure nozzle, brush, gear and motor, electrical/mechanical components & all other relevant items deemed necessary.
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 32mm OD(SDR-7.4)
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4)
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 20mm OD(SDR-7.4)
Providing and fixing GI Pipes complete with GI fittings and clamps including cutting and making good the walls etc.
Medium class 50mm dia
Medium class 32mm dia
Medium class 40mm dia
Providing and fixing Ball valve (Brass of approved quality high or low pressure) 25mm nominal Bore
Providing and fixing precast RCC Manhole cover and frame of required shape and approved quality EHD-35 circular shape 560mm internal dia.
Providing and laying Stone soling including compacting, watering including all carriages of material complete.
Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level
1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)- M20
1:3:6 (1Cement 3 fine sand 6 grade stone aggregate 20mm nominal size)- M10
Centering and shuttering including strutting, propping etc removal of form work in:
Foundation Works
Slabs
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)
12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. 600x600
Providing and fixing 1st quality Exterior Wall Tile Clading of approved make like in all colors, shades of any size as approved by Engineer in Charge laid over 12mm thick bed of cement mortar 1:4 (1 Cement 4 coarse sand)
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
Providing and fixing of Coloured Precast Cement Concrete Chequered tiles 25mm thick(300mm x 300mm) over layer of cement motar of mix 1:6 including grouting with matching pigment complete in finished form.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer
Providing and fixing of 10mm thick Ready made wooden Panneling in soffits including cost of Touchwood polish, screws, etc in Soffits, walls. gables, etc complete as per directions of engineer in charge.
Providing and fixing of plained eaves boarding 250x32 mm (nominal size) size of 2nd class kail wood
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat and lid with C.P. brass hinges and rubber buffers, 10 liter low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm overflow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 18.68.1 White vitreous china dual purpose WC pan with white solid plastic seat lid with white vitreous china flushing cistern and C.P. flush bend
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. 18.25.4 Angle back wash basin of size 400x400 mm.
Providing and fixing of white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm respectively with automatic Concealed flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of two urinal basins with 5 litre PVC white automatic flushing cistern of approved quality.
Providing and fixing of PVC pipe (Type "B") in proper gradient.
100mm Dia
75mm Dia
Providing and fixing of PVC fittings (Type "B") in proper gradient.
100mm Dia Plain Bend
100mm Dia Plain Tee
100mm Dia Door Bend
Reduced 100mm to 75mm
75mm Dia Plain Bend
75mm Dia Floor Trap
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.
Providing and fixing of 1.00HP Water motor of approved Greaves) including all accessories complete.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc
25mm nominal outer dia pipes
32mm nominal outer dia pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenghing, refilling etc. 32mm nominal outer dia pipes
Providing and fixing of CP Angle Valve of approved make (Jaquar, Cera, Resp) including all accessories complete.
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
Providing and fixing of Wash Basin Mixer of approved make (Jaquar, Cera, Resp) including all accessories complete.
Providing and fixing of Two in One Angle Jaquar, Cera, Resp) including all accessories complete.
Providing and fixing of Health Fuacet with chain of approved make (Jaquar, Cera, Resp) including all accessories complete.
Providing and fixing of CP Towel Rod 600mm Long of approved make(Jaquar, Cera, Resp) including all accessories complete.
Providing and fixing of CP Soap Case of approved make (Jaquar, Cera, Resp) including all accessories complete.
Providing and fixing of CP Connection 600mm-450mm long of approved make including all accessories complete.
Providing and fixing of CP Grating of approved make (Jaquar, Cera, Resp) including all accessories complete.
Providing and fixing of CP Nipples 50mm long of approved make including all accessories complete.
Providing and fixing of CP Cups of approved make (Jaquar, including all accessories complete.
Providing and fixing PTMT soap dish holder having the length of 138mm, breadth 102mm, the height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
Providing and fixing of Stain less steel paper holder with stand approved make including all accessories complete.
Providing and fixing of Stainless steel paddle operated dustbin of approved make including all accessories complete.
Providing and fixing of the 300mm Exhaust Fan (Crompton Make) as per approved specifications, complete.
Providing and fixing of 25 Ltr water heater (geysers) of approved make including cost of dash fasteners with nuts and washers, complete.
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Supply & fixing of following sizes pvc conduitalong with accessories in surface/recess including cutting 25 mm size
SITC of 10W concealed LED light (complete job ) as directed by Engineer incharge (Brand Phillips/ Bajaj/ Havels)
MCB 32 Amp.: Supply and fixing of suitable size GI box with modular plate and cover in front of surface or in recess including and fixing 32 Amp. modular socket outlet and 32 Amp, modular SP MCB, C Cuurve including connections (complete job) (Make ABB,L&T/Schneider)
Supply and fixing double pole , SPN (DP 32Amp. Including distribution box (complete job) (Make ABB,L&T/Schneider)
wiring for circuit/ sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (Complete Job with wire, PVC Conduit)
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing. specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
BidDoc.pdf
Tender Documents • 2.37 MB
BOQ_975090.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid