Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC | L1 | Accepted-AOC Accepted due to lowest rate quoted | |
| 2 | L2₹38.8 L+₹2.5 L (6.85%)Rejected-Finance | L2 | Rejected-Finance Rejected due to highest rate quoted | |
| 3 | L3₹42.6 L+₹6.2 L (17.1%)Rejected-Finance A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L3 | Rejected-Finance Rejected due to highest rate quoted | |
| 4 | L4₹55.5 L+₹19.2 L (52.7%)Rejected-Finance | L4 | Rejected-Finance Rejected due to highest rate quoted |
| Sl No | Description | Qty | Unit | akhil enterprises L3 | KISHAN SINGH AND CO L2 | M/S RK Builders L1 | M/s Nikhil Kumar Builders L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as directed. | 2.5 | Cum | 200 ₹500 | 300 ₹750 | 100 ₹250 Lowest | 400 ₹1,000 |
| 2.00 | M&L for Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in in chajjas and necessary formwork complete as specified and as directed. | 2.5 | Cum | 5,000 ₹12,500 | 7,000 ₹17,500 | 4,000 ₹10,000 Lowest | 10,000 ₹25,000 |
| 3.00 | S&F TMT reinforcement bars 10mm dia and over including all cutting bending binding cranking placing & binding with MS wire (ann ealed) not less than 0.9mm dia, complete. | 30 | Kg | 98 ₹2,940 | 80 ₹2,400 Lowest | 90 ₹2,700 | 120 ₹3,600 |
| 4.00 | Material and labour, Gunniting to existing RCC Chajja, facia, parapet, beams, landings and similar RCC members after removing all loose concrete & preparations of surface, application of derusting chemical such as Dr Fixit Rust Remover or equivalent, welding additional bars/welded steel wire fabric if found necessary, priming reinforcement bars with a coat of zinc primer of coating not less than 40 micron, provision of bonding agent with bonding material like Dr Fixit bonding agent and repair to external RCC structure with slurry light and steel/ply form work and shortcrete concrete of mixed 1:3:1 (one part of cement, three part of coarse sand and one part of 10mm and down aggregate) of minimum 50mm thick incl plastering 5 mm thick in CM mortar 1:3 all as specified in IS 9012-1978 (all priming and bonding epoxy based paint shall be of Dr Fixit epoxy zinc primer or equivalent) etc complete all as specified and directed, as below:- Note(s) : 1. The rates include for necessary formwork and scafolding etc. 2. Reinforcement and welded steel wire fabric will be measured and paid separately. | 240 | Sqm | 1,000 ₹2,40,000 | 900 ₹2,16,000 Lowest | 1,300 ₹3,12,000 | 2,000 ₹4,80,000 |
| 5.00 | Supplying and fabricating and placing in position of new TMT bars of any dia by welding or inserting by drilling holes and embeded in epoxy grout bonding agent of hilti or equivalent for all existing reinforcement repair works in any position wherever necessary complete all as specified and as directed by Engineer-in-charge. Note: The lap provided shall be 15 cm on either side of bar which has lost its sectional area all as specified and as directed | 30 | Kg | 98 ₹2,940 | 150 ₹4,500 | 90 ₹2,700 Lowest | 150 ₹4,500 |
| 6.00 | Demolition of cement concrete (unreinforced) including cast-in-situ terrazzo in ground floors and pavings not exc 15cm thickness (below or above ground level).all as specified and directed. | 7.5 | Cum | 200 ₹1,500 | 200 ₹1,500 | 100 ₹750 Lowest | 300 ₹2,250 |
| 7.00 | M&L for 25mm thick plain cement concrete type B-1 (1:2:4) using 20mm gradedstone aggregate as in sub base all as specified and directed. | 150 | Sqm | 200 ₹30,000 | 80 ₹12,000 Lowest | 200 ₹30,000 | 200 ₹30,000 |
| 8.00 | M & L 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection finished even and smooth without using extra cement, complete all as specified and as directed. | 50 | Sqm | 250 ₹12,500 | 200 ₹10,000 | 175 ₹8,750 Lowest | 400 ₹20,000 |
| 9.00 | M&L for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in rounded or chamfered on edges, copping etc in any description all as specified and as directed | 1 | Cum | 4,500 ₹4,500 | 5,000 ₹5,000 | 3,000 ₹3,000 Lowest | 8,000 ₹8,000 |
| 10.00 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed | 230 | Sqm | 30 ₹6,900 | 20 ₹4,600 | 10 ₹2,300 Lowest | 20 ₹4,600 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
10 Oct 2025, 6:00 pmClosed
GE (AF) GURGAON
GE (AF) GURGAON
CAMOUFLAGE/PAINTING PERIODICAL SERVICES REPAIR TO PLASTER/RCC SURFACE AND CERTAIN MISC WORKS AT OTM ACCN/TECH AREA OF AF STN RAJOKRI DHANSA AND INDAUR UNDER GE (AF) GURGAON
2025_MES_730597_1
GE/GUR-/NIT-61/2025-26
Open Tender
Civil Works
Item Rate
240 days
GE (AF) GURGAON
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) GURGAON
₹96,000
1 Dec 2025
12 Sept 2025
13 Oct 2025
12 Sept 2025
10 Oct 2025
26 Sept 2025
Amount
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as directed.
M&L for Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in in chajjas and necessary formwork complete as specified and as directed.
S&F TMT reinforcement bars 10mm dia and over including all cutting bending binding cranking placing & binding with MS wire (ann ealed) not less than 0.9mm dia, complete.
Material and labour, Gunniting to existing RCC Chajja, facia, parapet, beams, landings and similar RCC members after removing all loose concrete & preparations of surface, application of derusting chemical such as Dr Fixit Rust Remover or equivalent, welding additional bars/welded steel wire fabric if found necessary, priming reinforcement bars with a coat of zinc primer of coating not less than 40 micron, provision of bonding agent with bonding material like Dr Fixit bonding agent and repair to external RCC structure with slurry light and steel/ply form work and shortcrete concrete of mixed 1:3:1 (one part of cement, three part of coarse sand and one part of 10mm and down aggregate) of minimum 50mm thick incl plastering 5 mm thick in CM mortar 1:3 all as specified in IS 9012-1978 (all priming and bonding epoxy based paint shall be of Dr Fixit epoxy zinc primer or equivalent) etc complete all as specified and directed, as below:- Note(s) : 1. The rates include for necessary formwork and scafolding etc. 2. Reinforcement and welded steel wire fabric will be measured and paid separately.
Supplying and fabricating and placing in position of new TMT bars of any dia by welding or inserting by drilling holes and embeded in epoxy grout bonding agent of hilti or equivalent for all existing reinforcement repair works in any position wherever necessary complete all as specified and as directed by Engineer-in-charge. Note: The lap provided shall be 15 cm on either side of bar which has lost its sectional area all as specified and as directed
Demolition of cement concrete (unreinforced) including cast-in-situ terrazzo in ground floors and pavings not exc 15cm thickness (below or above ground level).all as specified and directed.
M&L for 25mm thick plain cement concrete type B-1 (1:2:4) using 20mm gradedstone aggregate as in sub base all as specified and directed.
M & L 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection finished even and smooth without using extra cement, complete all as specified and as directed.
M&L for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in rounded or chamfered on edges, copping etc in any description all as specified and as directed
Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed
M&L for non skid ceramic tiles 7 to 8 mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.12 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile complete all as specified and as directed.
M&L for Coloured Vitrified Ceramic tiles 9-10 mm thick (Square/rectangular) of Light Shade , polished, area of each tile not exceeding 0.36 sqm, fixed in floor etc over set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified.
M & L for glazed ceramic coloured tiles of size 450X 350X 7mm/ 600x300x7 mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles, complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) for bedding of tiles complete all as specified.
M&L for 10 mm thick rendering in cement motar 1:4 on vertical surface for bracking of tiles etc of tiles complete all as specified.
Dismantling water tanks Capacity of tank exc 250 & n. exc 500 ltrs removing complete all as specified and as directed
Dismantling water tanks Capacity of tank exc 500 & n. exc 1000 ltrs removing complete all as specified and as directed
Supply and fixing rotational moulded polyethylene three layered water storage tanks 500 litres capacity (cylindrical,vertical with closed top) hoisted and fixed in position all as specified and as directed.
Supply and fixing rotational moulded polyethylene three layered water storage tanks 1000 ltrs capacity (cylindrical,vertical with closed top) hoisted and fixed in position all as specified and as directed.
S & F in repair for Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, Bore dia of pipe in 20 mm, etc complete all as specifed and directed.
S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.
S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and cement concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed.
S&F in repair Vitreous china wash down water closet pan, pedestal pattern (EWC) white, including seat cover , fixing bolts connection to trap & to flush pipe complete all as directed
S&F in Repair Plastic water closet seat cover(Casgade model) closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, etc complete all as specifed and directed.
S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.
S&F in repairs stop cock/angle cock with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.
S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed.
M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint ( Camouflage Pattern) over priming coat premium quality on wall/ceiling surface including applying 1-2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth upto 4th storey buildings complete all as specified and as directed. Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engr-In-Charge in stage passing register before applying the finishes coat. (b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer.
M&L for preparation of old treated plastered or unplastered surfaces of walls/ceiling including cornices by brooming down or steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot, filling cracks/holes with putty and applying one coat of wheather proofing exterior acrylic emulsion paint (Camouflage pattern) on walls complete all as specified and as directed
M&L for preparation of plastered or unplastered old decorated surfaces by complete removal of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible , filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper over a coat of primer on walls complete all as specified and as directed. Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat. (b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer. (c) Wall care putty shall be measured and paid seperately.
All as per item No.3 here-in-before but on surfaces of ceiling.
M&L for reparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of oil bound distemper, complete all as specified and directed.
All as per item No.5 here-in-before but on surfaces of ceiling.
M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality on wall/ceiling surface including applying 1-2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth upto 4th storey buildings complete all as specified and as directed. Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat. (b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer.
M&L for preparation of old treated plastered or unplastered surfaces of walls/ceiling including cornices by brooming down or steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot, filling cracks/holes with putty and applying one coat of wheather proofing exterior acrylic emulsion paint on walls complete all as specified and as directed.
M&L for preparation of old surfaces of walls by washing rubbing down and stopping of surface and applying one coats of cement base paint complete all as specified and directed. Make of Cement Base paint : SNOWCEM/ASIANAINTS/DUROCEM /BERGER
M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering,brushing etc , filling in cavities and cracks etc with approved filler and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified .
M&L for preparing old painted surfaces of steel and iron surfaces over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified .
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as directed
M&L for brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 etc complete all as specified.
M&L Brick work with sub class 'B' Bricks, straight or curved on plan to any radius as in half brick thick wall in CM 1:4 complete all as specified and directed.
Taking down cement plaster or cement lime plaster on brick,concrete or stone surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified
M&L for 5 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceiling including finishing surface even and smooth without using extra cement.
M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls including finishing surface even and smooth without using extra cement
M&L for 15 mm thick plaster in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement) complete all as specified.
M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified.
M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified
M&L for preparation of newly plastered surface of wall and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality complete all as specified
M&L for preparation of newly plastered surface of wall and applying Two coats of wheather proofing exterior acrylic emulsion paint ( Camouflage Pattern) over a coat of primer premium quality complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint on walls. complete all as specified.
M&L for providing 3mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform all as specified.
M&L for providing 3mm thick wall care putty on ceiling before applying oil bound distemper and making the surface uniform all as specified.
Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed.
S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in trenches/fixed on walls.
S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in trenches/fixed on walls.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, including removal of rubbish outside MoD land complete all as specified.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittinges, heads, shoes, bends, swan-necks etc as specified and directed
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F in repair 110 mm bore PVC (SWR) bends with/without door of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) junctionsingle, (single T), equal or unequal with/without door of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) Vent cowl complete all as specified & directed
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 75 mm bore PVC (SWR) junction single, (single T), equal or unequal with/without door of any radius complete all as specified & directed.
S&F PVC floor trap with grating incl jointing to waste pipe of 75 mm dia in and including jointing with solvent cement complete all as specified and directed.
S&F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified & directed.
KISHAN SINGH AND CO (BID ID -3447615)
akhil enterprises (BID ID -3441772)
M/s Nikhil Kumar Builders (BID ID -3440915)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .