Strengthening of Bollards in CJ-2 and Painting the Pier Head Navigational Towers and Jetty handrails at North Breakwater

Amount

Painting the steel surfaces with Two coats of Synthetic enamal paint of approved quality (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers.

Painting the steel surfaces with Two coats of Bituminous Anticorrosive paint of approved quality (excluding priming coat) on previously painted steel and other metal surfaces with ready mixed Anticorrosive paint, brushing, black to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers.

Writing letters or figure on any surface with enamel painting (stops, comas, hyphens and the like not to be measured and paid for seperately) of approved colour and quality for 25 CM height letters including cost of enamel paint, labours, scaffolding charges and cleaning the surface etc., complete complying with AISS and as drectred by the departmental officers.

Supplying the structural steel, MS Angles, Channels, Flats etc., for vertical members / bracing / stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shownin the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note : 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer.

Dismantling and removal of Plain Cement Concrete (PCC) above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers.

Providing and laying Plain Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of Coarse sand & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) for RCC works using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers.

BETHELEHEM ENGINEERING WORKS