PROVN OF CERTAIN MINOR WORKS AND PROVN OF

Amount

M&L For Drilling trial bore in any strata 200 mm dia with the help of drilling machine chain pully, tripod and other reqired T&P related to drilling hole complete all as specified and directed.

M&L for lowering UPVC plane Casing pipe 150mm dia of pressure rating 12 Kg/sq cum including making slots wherever necessary complete all as specified and directed.

M&L for lowering UPVC slotted Casing pipe 150mm dia 6 Kg/cm sq into tube well complete all as specified and directed.

Supply and packing pea gravel of 2 mm to 6 mm size of approved quality as orderedto pack around the casing/slotted pipes in bore well complete all as specified and directed.

M&L for MS well cap 2 mm thick of 150 mm dia size on top of the pipes with locking arrangement complete all as specified and directed.

M&L two number MS Clamp made out of flat iron 50 mm x 6 mm thick suitable for holding cloumn pipe & cashing pipe including nuts & bolts complete all as specified and directed.

Supply and fixing UPVC column pipe 50 mm bore 12 Kg working pressure standard grade for pump set including plastic rope for supporting of submersible motor necessary fitting and connection to submersible pump complete all as specified and directed.

Supply, lowering, commissiong and testing of submersible pump set single phase, capacity 2 HP and discharge head 60 Mtrs complete all as specified and directed.

Supply & fixing PVC insulated submersible cable 2.5 Sqmm one twin core 1100 volt grade complete all as specified and directed.

S&F GM gate valve ISI marked IS-778 screwed down for iron pipe or ferrule including fittings such as union, socket, nipple, check nut etc of size 50 mm including cutting of existing GI pipe and fixing properly all as specified and directed.

S&F GM gate valve ISI marked IS-778 screwed down for iron pipe or ferrule including fittings such as union, socket, nipple, check nut etc of size 20 mm including cutting of existing GI pipe and fixing properly all as specified and directed.

Supply and fixing DOL submersible motor controller starter, single phase with MCB, over load relay, under volt/over volt relay, contractor, voltmeter, Amp meter, ON & OFF push butten including fixing arrangement suitable for 2 HP submersible pump complete all as specified and directed.

Supply, laying and jointing 25 mm bore galvanized steel tubing medium grade in tranches/on floor/wall with clamp as reqd as per MES SSR Part-I including ISI marked fittings, including cutting to reducing length, screwing and connecting complete all as specified and directed.

Supply, laying and jointing 20 mm bore galvanized steel tubing medium grade in tranches/on floor/wall with clamp as reqd as per MES SSR Part-I including ISI marked fittings, including cutting to reducing length, screwing and connecting complete all as specified and directed.

Developing tube wells by compressed air with minimum pressure of 10 Kg/sqcm and minimum 450 CFM all as specified in IS 11189-1985, para 4.3 and directed. Note - Compressor, pump pipe and other allied items will be arranged by contractor and no extra payment will be made by the dept complete all as specified and directed.

Supply, laying connecting and testing XLPE insulated, armoured cable, heavy duty, electric cable with multistranded aluminium conductor, 1100 volt grade of size one twin core, 4 Sqmm laid in trenches/ducts/wall or through pipe on pole with suitable size of cable glands, crimping type cable lugs complete all as specified and directed.

Yield testing for the bore well with the help of ‘V’ notch tank 90 degree by continuous pumping for 16 Hrs complete all as specified and directed.

Chemical and bacteriological testing of sample from approved laboratory to ensure pot-ability of water complete all as specified and directed.

Geological survey for CGWD complete all as specified and directed.

M&L for point wiring, concealed type, with 1.50 sqmm PVC FRLS insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/street/bell point controlled by 1 one way switch 5/6 Amps and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.

All as per item No 20 above but for one socket out let 3/5 pin, 5/6 Amps controlled by 1 one way switch on the same board with other switches complete all as specified & directed.

M&L for Point wiring for one 15/20 Amp socket outlet with 2.5 Sqmm PVC insulated, flame retardent (FRLS), single core stranded copper conductor in and including concealed PVC conduit 19/20 mm dia to be terminated in pressed steel terminal boxes of 3 mm bakelite sheet top cover (Make Hylem/Super ) including 1.5 Sqmm PVC insulated flame retardent single core stranded copper earth contuinuity conductor controlled by one switch and or on regulator and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified and directed. Note: Wiring shall be made as per colour code in IS for Phase, neutral and earth.

Supply and fix switch piano, flush type, single pole, 5/6 Amps one way, 230 volts complete all as specified and directed. Make: Anchor Cat No.38058 or equivalent make as approved by GE from list of makes.

Supply and fix socket outlet, 5/6 Amps, flush type, 5 pin 230 volts complete all as specified and directed. Make: Anchor Cat No.38320 or equivalent make as approved by GE from list of makes.

Supply and fix switch piano, flush type, single pole, 20 Amps one way, 230 volts complete all as specified and directed. Make: Anchor Cat No.39991 or equivalent make as approved by GE from list of makes.

Supply and fix socket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed. Make: Anchor Cat No.39994 or equivalent make as approved by GE from list of makes.

S&F for ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals complete all as specified and directed. Make -Anchor CAT Part No-39072 or equivalent make as approved by GE from list of makes.

Supply and fixing electronic steping up type ceiling fan regulator suitable to operate at 230 volts 50 Hz , AC supply complete all as specified and directed. Make -Anchor cat part 14502 or equivalent make as approved by GE from list of makes.

S & F Ceiling Fan 1200 mm sweep, AC single phase, 230 Volts 5 star rating complete all as specified and directed.

S&F fan hooks made out of MS flat of size 40x6mm including nuts, bolts and washer suitable for hanging of fans on existing MS angle/GI pipe including painting two coats of black synthetic enamel paint over primer complete all as specified and directed.

S & F wall mounted Fan havy duty with turbo force 400 mm sweep, AC single phase, 230 Volts complete all as specified and directed. Make : Havells model No. Turboforce or equivalent make as approved by GE from list of makes.

Supply & fix MCB Single Pole, 6 to 40 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed. Make:- Legrand CAT No. 4085 87 to 4085 96 or equivalent make as approved by GE from list of makes.

Supply & fix MCB SPN 40 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed. Make:- Legrand CAT No. 408618 or equivalent make as approved by GE from list of makes.

Supply and install refrigerators, electric driven, single phase of capacity 310 Ltrs or nearest higher size 3 star rating complete all as specified and directed.

Supply and fix voltage stabilizer with built in high cut, buzzer & timer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 with output voltage stabilized at 230 V with accuracy of (+ -2.5%), 50 Hz of capacity 1.0 KVA complete all as specified and directed.

Supply and install heavy duty hydro machine Hydro extractor , electric driven, single phase of capacity 25 kg(basket size 13``x20``) driven by 2 HP single phase motor,1325 RPM complete all as specified and directed.

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size).Plastic/PVC Body complete all as specified and directed.

S & F Desert cooler stand of made out of angle iron 25mm x 25mm x 3mm including welding, cutting and grouting on wall as required as per site requirement and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and install water heater (Geyser) of capacity 25 Ltrs storage type electric supplied 4 star rating stainless steel tank complete all as specified and directed Make : Havells cat part no GHWAPTTIV025 or equivalent make as approved by GE from list of makes.

S & F galvanized iron tubes, medium grade of size 15 mm bore fixed to wall, ceiling and laid under floor including necessary fittings complete all as specified and directed.

M&L for Cutting into wall and inserting 15 mm bore Tee including cutting GI tubing of 15 mm bore complete all as specified and directed.

S&F 15mm dia stop cock, cast copper alloy, out side thread, high pressure with fancy type chromium plated screwed both ends for iron pipe complete all as specified & directed.

S&F bib taps 15mm bore, cast copper alloy with fancy type , screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F PVC connection 15mm bore, 450mm long in any position with both end brass nut with inner threading and washer suitable for cold and hot water connection complete all as specified & directed.

S&F fastener mild steel 100 mm long x 10 mm dia with pin and bolts complete for hanging of geyser and making good the disturbed surfaces with cement mortar and finishes the surfaces complete all as specified & directed.

Supply and installation of partialy stainless steel body water cooler electric driven single phase having apprix nominal cooling capacity of 40 Ltrs and storage capacity of 80 Ltrs per hour with 2 Nos cold water outlet complete all as specified and directed

Supply and fix voltage stabilizer with built in high cut, buzzer & timer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 140 V to 280 with output voltage stabilized at 230 V with accuracy of (+ -1.0%), 47 Hz to 53 Hz of capacity 4.0 KVA complete all as specified and directed.

Supply and fix voltage stabilizer with built in high cut, buzzer & timer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 140 V to 280 with output voltage stabilized at 230 V with accuracy of (+ -1.0%), 47 Hz to 53 Hz of capacity 5.0 KVA complete all as specified and directed.

S&F sheet metal neutral enclosure single pole with two pin and earth plug and socket complete with one pole MCB 20 amps, SP, 230 volt 10 KA 'C' series for AC complete all as specified & directed.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, solid copper conductor cable of size 2.5sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 2.5 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, solid copper conductor cable of size 4.00 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 4.00 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.

Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 415 volt 200 amps standered rated bus bar and earth bar with encloser blank plate, without MCB complete all as specified and directed.

Supply and install, testing & commisioning split type air conditioner of capacity 1.5 TR complete, single phase, 50 Hz, 230 volts, compressor high EER rotary, remote operated suitable for non CFC refrigrent with minimum 3 star rating complete all as specified and directed

Supply and install, testing & commisioning split type air conditioner of capacity 2.00 TR complete, single phase, 50 Hz, 230 volts, compressor high EER rotary, remote operated suitable for non CFC refrigrent with minimum 3 star rating complete all as specified and directed

M&L earthing complete with glavanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe utpo 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of Gi bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt, 20 mm bore medium grade GI watering pipe, PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/Loose soil, deposited the surplus soil to a distance not exceeding 50 mtr away from starting point and testing the earth resistance after completion all as per electrical plate No 3 of SSR Part-I. complete all as specified and directed. Note:- Rate included for excavation & earth work in any type of strata as shown in electrical plate No 3.

M & L chemical earthing complete with copper earth plate electrode 900 x 600 x 5 mm size, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including copper earth strip of 32x6 mm including 40 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth, strip connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by chemical earthing compound, 20 mm bore medium grade GI watering pipe, PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/loose soil deposited the surplus soil to a distance not exceeding 50 Mtr away from starting point and testing the earth resistance after completion all as per electrical plate No 3 of SSR Part-1. complete all as specified and directed. Note:- Rate included for excavation & earth work in any type of strata as shown in electrical plate No 3.

S&F iron metal body heavy duty exhaust fan 450 mm sweep, 230 volts, 50 Hz, including connecting from ceiling rose to fan connector complete all as specified and directed. Make : - Havells model No turboforce SP 1400 RPM or equivalent make as approved by GE from list of makes.

S&F iron metal body heavy duty exhaust fan 300 mm sweep, 230 volts, 50 Hz, including connecting from ceiling rose to fan connector complete all as specified and directed. Havells model No turboforce SP 1400 RPM or equivalent make as approved by GE from list of makes.

Material and labour for making hole in wall of any thickness and any description for fixing 300/450 mm size exhaust fan and making good the disturbed surface as per existing complete all as specified and directed.

PD GUPTA AND COMPANY

Asha Construction