48/EEC/BSNL/CD/BGL/2024-2025

Amount

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

20 mm dia (heavy type)

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.

With available beading beading

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378)

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378)

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378)

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Single rubber stopper

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

Double strip (horizontal type)

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

1.0 mm thick.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Single socketed pipes.

110 mm diameter

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete :

New work (two or more coats) having VOC content less than 50 gram/litre

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade.

Old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Renewing glass panes and refixing existing wooden fillets:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

20 mm nominal outer dia. Pipes.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

25 to 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

100 mm diameter

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 45 cm length.

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg.

Providing and fixing stainless steel grating with or without hole for waste pipe for covering existing floor/nahani trap (a)100mm dia

Providing and fixing C.P. brass bib cock /stop cock of approved quality conforming to Is standards .Cost includes removal of non-funtional/worn-outbibcock/stop cock etc complete as directed by the Engineer in charge.

Providing and fixing 15 mm Health faucet of C.P brass head and P.V.C connection pipe of approved make etc. complete as per the directions of Engineer-in-Charge. Cost includes removal of non-funtional/worn-out health faucet.

Providing and fixing C.P brass two in one tap including fittings of approved make etc. complete as per the directions of Engineer-in-Charge.Cost includes removal of non-funtional/worn-out Two -in- one tap.

Providing and fixing 15mm C.P Brass pillar taps of approved quality conforming to IS. Standard of approved make etc. complete as per the directions of Engineer-in-Charge. Cost includes removal of non-funtional/worn-out pillar tap

Providing and fixing Brass spindle of approved quality to pillar cock / stop cock /bib cock/ concealed stop cock of 15mm or 20 mm nominal bore by replacing the damaged spindle complete as per the direction of the Engineer in charge. Brass spindle of approved quality for concealed stop cock of 15mm or 20 mm nominal bore

"Providing and fixing 600x100x4 mm high grade ABS(Acrylonitrile Butadiene Styrene) shelf with edges round off,with guard rail complete fixed with 40 mm long screws, rawl plugs etc.,complete" as directed by the Engineer in charge

Providing necessary repairs to the damaged MS windows/doors by removing the door shutter (either by cutting/ burning the hinges using gas welding machine at site or by removing the shutter after removing the screws and butt hinges as the case may be) and refixing the door in original position after removing the bend/ undulations in the door (members either horizontal or vertical or replacing the member it self (if required) including making good the damaged portion with necessary enamel painting (two or more coats over a coat of steel primer) all complete as per the directions of Engineer in charge.

MS Garage DOOR Shutters (Note: The approximate door area to be repaired shall be 5 (2) The cost of MS sections if used shall be paid separately )

Utility door Shutters.( (Note: The approximate door area to be repaired shall be 2.5sqm (2) The cost of MS sections if used shall be paid separately ,Cost includes removal and refixing of existing glass panes)

Providing necessary repairs to the damaged 40mm dia M.S Balcony grill hand rail by cutting the damaged portion (members either horizontal or vertical or replacing the member it self (if required) including making good the damaged portion with necessary enamel painting (two or more coats over a coat of steel primer) all complete as per the directions of Engineer in charge. ( (Note: The approximate door length to be repaired shall be 5M (2) The cost of MS pipe if used shall be paid separately

Repairs to PVC flushing cistern of 10 Ltr capacity of any make and size including removing and replacing worn-out/non-functional parts like syphon washer, ball valve, flushing knob , siphon set, 32mm dia fulsh bend etc. wherever required complete as per the directions of Engineer-in-Charge. (a) Providing and fixing PVC flushing cistern syphon flush valve system with washer of approved quality

Dismantling FRP sheet from door frames (of area up to 5 sqm) including removing the j bolt and stacking of serviceable material and disposal of unserviceable material with in 50m lead.

Pruning, trimming, of tree branches including removal of cut materials upto 50mt. lead and as per direction of officer in charge (necessary T&P shall be arranged bythe contractor).

(ht 15 feet and above) and gith up to 30cm

Cleaning of water tank on terrace approximate capacity of 1500 litres manually using bleaching powder including necessary rubbing and cleaning of internal surfaces with clean water to make the tank odour free.

Removing the damaged rain water pipe by dismantling the brick work,concrete and fixing rain water pipe with necessary concrete 1:2:4 ( onw cement :two coarse sand: 4 stone aggregate 20mm) for 0.6x0.6m 50mm thickness with necessary water proofing compound finished with 12mm cement plaster 1:3 (1 cement :3 fine sand) and a coat of necement cement rounding the edge and making and fininishing the outlet complete.( Note: cost of rain water pipes shall be paid for separately.Te approximate area of concrete to dismantled is 0.5 sqm)

cleaning of toilet wall tiles f,floor tiles , EWC/ IWC,Wash basin including removal of dirt/dust,hard water stains,yellow/brown spots from corners,appliances using scrubbing machine and mild chemicals etc complete as directed by the Engineer in charge. Note: The tiles area to be cleaned up to 20sqm,EWC/IWC -1no and wash basin-1no)

Providing and fixing cup board shutters 19 mm thick, ply wood (BWR) grade including IInd class teak wood lipping of 19mm wide x12 mm thick with necessary screws and bright finishedmild steel piano hinges complete as per direction of the Engineer-in-Charge

Arresting leakage in walls by applying brush bond or equivanet over the plastered surface etc complete as per directions of the Engineer-in-charge.

Providing and fixing CPVC gate valve with CPVC handle of approved quality

providing and fixing 1mm thick PVC sheet approved manufacture including fixing it in position with necessary screws/nuts and bolts all complete as directed by Engineer in charge.

Clearing blockages in Sewer lines of any diametre between over flowing blocked manholes of all sizes and depth including removal of sludge / silt /rubbish etc., and disposal of the same up to lead of 100m

Clearing of blockage in floor trap/ gully trap and conncected sewer line up to manhole at all levels including rodding with G.I wire of suitable thickness in blocked SWR pipes up to required length and removing rubbish / sludge and disposal of the same up to a lead of 100m complete as per the directions of Engineer-in-charge.

Uprooting the vegetation growth in the terrace slabby dismantling the cracks, raking out the joints,removing the roots and dipoal of the same etc complete as directd by the Engineer in charge.

P/F SWR grade fittings of approved make and manufacture in the existing line including cutting and fixing with adhesive etc complete as directed by the Engineer in charge. ( 110mm dia)