SPECIAL REPAIR TO BLDG NO P-98 SINGLE LIVING JCOs ACCN AT 16 CZW UNDER GE (ARMY) DHAR ROAD, UDHAMPUR

Amount

Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed .

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as directed.

All as per Srl item Srl No 2 above here in but except bricks.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per user manual at any height etc complete all as specified and directed. (WPC will be measured and paid separately).

Supply only liquid WPC

M&L for rendering 10 mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. .

M&L for preparation of new plastered surface and applying two coats of oil bound distemper on wall over one coat of primer etc complete all as directed.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance and all as directed.

M&L for preparation of new plastered surface and applying three coats of white wash on ceiling over one coat of primer etc complete all as directed.

M&L for preparation of old surfaces by removal of existing treatmen and applying two coats of oil bound distemper over a coat of primer on surface of walls through electrical operated grinder etc, complete all as spcified and directed.

M&L for preparation of old surfaces by removal of existing treatment and applying two coats of white wash on ceiling over one coat of primer etc complete all as directed.

M&L for preparation of old surfaces by removal of existing treatment and apply two coats of cement based paint over a coat alkali primer resistance etc complete all as specified and directed .

M&L for providing RCC nominal mix 1:2:4 incl necessary formwork and providing plaster in cement mortar 1:3 and two coats of finishes over a coat of primer for RCC projected portion as in facias, fins upto a height of 30 cm facia etc incl demolition of existing and providing TMT bars if reqd all as specified and directed. (Note length of fins, facias shall be measured irrespective of any thickness and height).

M&L for repair of RCC slab, beam by removing of old portion of concrete and cleaning/brushing and removing of loose concrete/applying required cement slurry @ 3.5 kg/sqm making good with concrete 1:1.5:3 and applying 3 mm thick cement mortar 1:4 and finish the surface all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises as directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, incl Brushing neat cement slurry with 3.0kg of cement per sq. metreetc all as specified and directed.

M&L for non skid ceramic coloiured tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles over,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) etc complete all as specified and directed.

M&L for Glazed ceramic colour tiles in vertical surface 350x450x 7 mm thick set andjointed in neat cement slurry and pointed in white or colour cement to match with tiles including 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface etc complete all as specified and directted. Note : shade & design as approved by EIC/GE.

M&L for Non - skid Ceramic colour tiles joint free 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 etc complete all as speciefied and directed.

M&L for Non - skid Ceramic colour tiles joint free 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in dado , skirting etc. set and jointed in neat cement slurry over 10 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match etc complete all as speciefied and directed.

M&L for 18 to 20 mm thick Kota stone slab flooring (Machine cut) of any size laid over and incl 20mm thick bedding layer in cement mortar 1:6 for laying floor finishes over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring all as specified.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick 1:3 cement mortar jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring all as specified.

M&L for Makrana Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble complete all as specified.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as spd and directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each and all as specified and directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and all as specified and directed.

M&L for factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), all as specified and directed by Engr-in-Charge

S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frames shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom raid on either side and as gap insert for top rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rials with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing as directed by Engineer-in-Charge. Make : Sintex/Policon or Equivalent make

Providing Kitchen cabinet/cup board shutter/Partation/Shelves in required size at site made out of 18mm thick MDF board one side decorative lamination PVC sheet complete all required etc. The panels shall be fabricated using adhesive and secure as required. All edges shall be covered with 2mm thick edge bonding taps or 90⁰ edge bent finish as per manufacturers instructions.

M&L for factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification & drawing and all as directed by the Engr- in-Charge.

S&F for pressed steel frames of size 75 X 60 mm for Cub board frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified.

S&F Pressed steel frames of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified as directed.

S&F Steel windows made up of box steel section of 16 gauge ms sheet ub outer frame, shutter farame and centre frame with outer side glazed shutter and inner side wire gauged shutter fixed as shwon in drg consisting with two nos pintol hinges 75mm long, two Nos stove enemaled tower bolts 150 mm long and one No steel handle, deovitailed or welded each panels complete with necessary cleats and stopers all as specified as directed.

M&L for 3 Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

S&F Steel ventilator made up of box steel section of 16 gauge MS Sheet frame, partly fixed and partly openable with outer glazed shutter and inner side wire gauge shutter consisting with 2 Nos pintos hinges 100mm long 2 Nos stove enameled tower bolt 150mm long and 1 Nos steel handle dovetailed or welded with each shutter complete with necessary cleat and stopper complete all as specified and directed (MS guard bar/grill work will be measured and separetly).

M&L for 3 Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified.

S&F for Galvanised mild steel wire cloth, t 0.56mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed.

S&F for aluminum handles cast type anodized 150mm long (ISI Marked) complete all as specified and directed.

M&L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm all as specified and directed.

M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M&L for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed by Engr-in-charge.

S&F in repair for Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush pipe) incl connection to drain and flushing pipe complete all as spd and directed.

S&F in repair of PVC flushing cistem low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets and taking down of old CI/PVC flushing cistern complete all as specified.complete all as specified and directed.

S&F Vitreous China, wash hand basin, counter top, white, of size 30mmx445mmx195mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs, complete all as specified. Make: Jaquar Cat Part No. ECS-WHT-601 or equivalent in Make as per Appx `E' to Particular specification

S&F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.

S&F in repair Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.

S&F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

S&F in repair for wall mixer with provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs and wall flanges, complete all as specified and directed. Make: ESS cat part No EC-10 or equivalent.

S&F in repair Chromium plated brass Centre hole mixer without pop up waste system 15mm bore for mixing hot and cold water screwed down for iron pipe for WHB, complete all as specified. Make: Jaquar Cat Part No. CON-167KNV or equivalent in Make as per Appx `E' to Particular specification.

S&F in repair for Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 15 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F in repair for Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair for PVC connections 60cm long superior quality with PTMT nut on both sidecomplete all as specified and directed.

S&F in repair grating round 125mm size of CP complete all as specified and directed.

S&F in repair stainless steel pegset of six suitable size of length complete etc

S&F in repair for 25 mm dia Decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate. Nothing extra shall be paid on this account.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 1000 ltr capacity, hoisted and fixed repair in position including 20 mm dia float valve with aluminium fitting, GI nipple any other fittings as reqd , dismantling existing water tank complete all as specified and directed.

Taking up or down 15 mm dia bore steel tubing and connection including cleaning for refixing or removed to store complete all as specified and directed.

S&F for GI tubing 15mm bore medium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required all as directed and specified.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed..

S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 25 mm dia bore complete all as specified and directed..

S&F GI tubing 25 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 40 mm dia bore complete all as specified and directed..

S&F GI tubing 40 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia with excess door

S&F in repair PVC (SWR) junction single, (Single T) equal or unequal of 75mm dia with excess door

S&F in repair PVC (SWRPVC (SWR) vent cowlof 110mm dia

S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

S&F in repair PVC(SWR) door bends suitable for 110 mm external dia with excess door complete all as specified.

S&F in repair PVC(SWR) door bends suitable for 75 mm external dia with excess door complete all as specified.

M&L for 50mm thick PCC 1:3:6, nominal mix, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in alternate bays (not exceeding 2 Sqm each) surface finished even and fair without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising of one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified

M&L for taking down existing roof treatment of any description and any type all as specified and directed by Engr-in-Charge

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per user manual at any height etc complete all as specified and directed. (WPC will be measured and paid separately).

Supply only liquid water proofing compound.

M&L for Priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm all as specified (Make of polymeric water proofing membrane : M/s IWL India Ltd/M/s STP Texas Ltd/Bengal Bitumen)

M&L for Chiken wire mesh of size 12.5 mm and wire dia 0.51 mm (24 SWG) hexagonal construction, stretched firmly for roof treatment, complete all as specified and directed by Engr-in-Charge

M&L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) for roof pedding, finish even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

M&L for Making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified.

Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:3) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m),(e) M&L for PCC 1:7 :12 for fillin of sunken portion after conceling all menbrane and sealing all joints to the entire with broken bats and light weight all as satisfaction of Engineer-in-Charge. MAKE: LAFARGE, TEXA, STP, BENGAL AQUAFLUX. lAFARGE, TEXA, STP, BENGAL AQUAFLUX.

S&F for Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixed with galvanized steel staples supplied and fixed complete to wood or steel member, weight exc 4 kg per Sqm complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16, complete all as specified and directed.

Excavating in trenchs n exc 1.5m in depth and n exc 1.5m wide for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,stay assembly/laying of cable/errection of poles etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out soft/loose soil complete all as specified & as directed.

M&L for PCC 1:3:6 type C-2 (40 mm graded aggregate) in foundation filling and mass concrete for bottom of manhole complete all as specified & as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & as directed.

Removing excavated soil material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified & as directed.

M&L 15 mm thick rendering in cement mortar 1:3 inside and outside wall of manhole,septic tank etc of brick work/concrete surfaces finished even and smooth ( With out using extra cement) complete all as specified & as directed.

M&L type B1 1:2:4 (20mm graded aggregate) providing RCC precast cement concrete as in cover slab for man hole and similar article with plain face and set in cement mortar 1:4 complete all as specified & as directed.

M&L TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to complete all as specified & as directed.

ditto as per item Srl No 97 above but 6mm dia to 8 mm dia.

M&L for reinforced concrete pipe Class NP-2, 150mm dia with coller laid jointed with CM 1:3 complete all as specified and directed.

M&L PCC 1:3:6 type C2 as in concrete bed to 150 mm bore drain pipe and over incl packing under haunching against the sides of pipes after pipe laid and tested complete all as specified & as directed.

S& F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specifed and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified

M&L two coat of synthetic enamel paint over a coat of red oxide on steel surface incl preparation of steel surface width or girth exc 10cm all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed

M&L cement concrete (1:3:6) type C1 (20mm graded stone Agg.) as in embedding of angle iron post complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above gound level , concrete debris and rubbish to a distance n exc 100m as directed by the EIC.

M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base all as specified and directed.

Machine pressed precast concrete interlocking paver block, shape and size as approved by the GE, confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning, complete all as specified and as directed

S&F of Gate valve 20 mm bore complete all as specified.

S&F of Gate valve 40 mm bore complete all as specified.

Cutting/making hole into CI/DI/MS pipes of 100 mm carefully and insertion of new tee incl clamping with suitable size clamp for taking small branch connection upto 25 mm bore complete all as directed by EIC.

Taking down old unserviceable gate valve 20 mm dia

Taking down old unserviceable gate valve 40 mm dia

Taking down carefully aluminium/copper point wiring (light, fan, socket or power ) complete, including fittings and fixtures such as switches, ceiling roses, light fittings, regulators, sockets etc, removing materials to store, or keeping in safe custody for offering credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for Point wiring complete (for simple and modular type ) with 1.5 sqmm single core PVC insulated medium grade ISI Marked,FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC non metalic PVC conduit medium grade not less than 20mm dia with all accessories like tee, straight joint, L Bend etc.,concealed on walls, sufrace on ceiling/ floors etc., and including provision of PVC heavy duty Insulated FRLS copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of sheet metal modular sunken box fixed and flushed inside the walls, with laminated sheet top cover for housing the switches, socket outlets, fan regulators etc., for the following:-

All as per Srl item No. 115 but for One light / Exhaust Fan/Ceiling fan & One Bell/buzzer point controlled by one switch.

All as per Srl item No. 115 but for One switch socket outlet point 3 pin 5 Amps on Independent board.

All as per Srl item No. 115 but for One switch socket outlet point 3 pin 5 Amps on same board.

Material and labour for Point wiring complete with 2 run of 2.5 sqmm single core PVC insulated medium grade ISI Marked , unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including suitable size of PVC white non metalic conduit with all accessories like tee, straight joint, L Bend etc., concealed on wall surface on ceiling / roofs etc., and including provision of PVC medium grade ISI Marked unsheathed copper conductor 1.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of sheet metal box 1.6mm thick fixed and flushed inside the walls, with laminated sheet top cover for housing the switches/socket outlets 15 Amps.

Material and labour as in repair for sub main wiring with two single core PVC insulated unsheathed copper conductor cable 6 sqmm drawing in and including rigid non metalic PVC medium grade 25 mm dia conduit concealed on wall/surface on ceiling with one additional PVC wire of copper conductor of 4 sqmm for earth continuity conductor incl taking down old Unsv submain any type and size and making good the disturbed surface complete all as specified and directed by EIC.

S&F bracket holder/ Angle lamp holder fixed on wall /ceiling all as approved and directed by Engineer-in-charge.

Supply only LED 9 Watt lamp , 240 Volt, 50 Hz lamp

S/F Bell Push flush type 5 Amps 240 volts, single pole all as specified and directed.

S/F Call Bell AC 230 V Single Pole along with necessary electric connection including taking down old unsu call Bell all as spd and directed.

Supply and Fixing LED 20 Watt light fitting Baton integrated LED channel, integral sleek extruded polycarbonate LED Channel with white acrylic cover and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete with all accessories including taking down old unsu all as specified and directed by Engr-in-Charge.

Supply and fixing Exhaust fan AC single phase 230 volts for size 300 mm sweep, including making hole and fixing arrangement including nut, bolts, washer etc, making good the disturbed surfaces matched with existing finishes comprising with necessary eletric connection with suitable copper wire from ceiling rose complete incl taking down old Ex fan any size any type complete by removing its electrical connection and deposit it to E/M MES store or as directed by EIC.

Supply and fixing Ceiling fan AC single phase 230 volts for size 1200 mm sweep, including fixing arrangement such as nut, bolts, washer etc, making good the disturbed surfaces matched with existing finishes comprising with necessary eletric connection with suitable copper wire from ceiling rose complete incl taking down old ceiling fan any size 1200/1400 mm any type complete by removing its electrical connection, dismantling its rod and wings complete and deposit to E/M MES store or as directed by EIC.

Supply and fixing of building security LED fitting upto 40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection incl taking down complete all as directed by EIC

S&F 1.5m long 40mm bore light grade GI pipe bracket duly cut to size and bent to shape required duly painted with 2 coats of synthetic enamel paint (of approved tint) over a coat of red oxide primer, including suitable 2 Nos. FI clamps as required to fix on concrete / steel poles incl taking old unsve GI bracket any type and size complete all as specified and as directed

Supply and fixing of Fancy LED wash basin light fittings 9/10 Watt 230 V AC complete with IP 65/66 protection including taking down old unsu wash basin LED light all as directed by EIC

Supply & fix Electric Storage water heater of capacity 25 Ltr , 230 V energy efficient complete all as specified and directed by Engineer-in-charge.

S&F ceiling rose Ceiling rose, 3 phase/PVC/polycarbonate, isolated body all as specified and directed.

Supply and fix fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, including taking down old unsv reulator complete all as specified and as directed.

Supply and fixing socket outlet 5 Amp 230 volt ISI Mark complete all as specified and directed

Supply and fixing Switch , single pole, one way 5 Amp 230 Volt ISI Mark complete all as specified and directed

Supply and fixing socket outlet 16 Amp 230 volt ISI Mark complete all as specified and directed

Supply and fixing switch , single pole, one way 16 Amp 230 volt ISI Mark complete all as specified and directed

Supply & Fixing TPN DB 8 Way distribution Box, double door of protection grade IP 54 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar complete confirming to IS 13032 & 8623 incl taking down old UNSV TPN DB any type and size complete all as specified and directed.

Supply & Fixing SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, incl taking down old UNSV SPN DB any type and size complete all as specified and directed.

Supply & Fixing MCB SPN, 40 to 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked including taking down old unsv MCB complete all as specified and directed.

Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked including taking down old unsv MCB complete all as specified and directed.

Supply & Fixing MCB TPN 63 Amps 440 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked including taking down old unsv MCB complete all as specified and directed.

M&L as in repair for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately) including taking down old/unsv earthing material.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core

Taking down old unserviceable XLPE cable upto 25 Sqmm mm any size and type complete.

M&L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose

M&L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable complete all as specified and directed.

Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 40 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 20 cm in width not exceeding 30 cm in depth for passing of LT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e bitumen/PCC (1:3:6) type C-1 complete all as specified and directed .

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed by Engr-in-Charge.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified directed by Engr-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided.

M/S PAWAN KUMAR ANAND

S.K CONSTRUCTION

DAVINDER SINGH

TARUN BUILDERS

PARAS RAM ASGOTRA AND SONS