Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.0 CrAccepted-AOC 184 187 TEMPLESTEPS BLOCK ANNASALAI LITTLEMOUNT CHENNAI CHENNAI TAMIL NADU 600015 | CHENNAI | TAMIL NADU | 600015 | ₹2.0 Cr | L1 | Accepted-AOC Accepted L1 Bidder. |
| 2 | L2₹2.1 Cr+₹3.8 L (1.84%)Rejected-Finance 5TH FLOOR DP 9 P T I BLDG SALT LAKE SALT LAKE KOLKATA WEST BENGAL 700091 | KOLKATA | KOLKATA | WEST BENGAL | 700091 | ₹2.1 Cr+₹3.8 L (1.84%) | L2 | Rejected-Finance Other L1 Bidder. |
| 3 | L3₹2.1 Cr+₹5.4 L (2.63%)Rejected-Finance SCHINDLER HOUSE MAIN STREET HIRANANDANI GARDENS POWAI MUMBAI 400076 MAHARASHTRA INDIA | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400076 | ₹2.1 Cr+₹5.4 L (2.63%) | L3 | Rejected-Finance Other L1 Bidder. |
Tender Value
Refer Docs
EMD Value
₹4.9 L
Closing Date
8 Aug 2020, 3:00 pmClosed
Superintending Engineer and Project Director, Proj
Office of the Superintending Engineer and Project Director, Project Implementation Unit - I, P.W. (Roads) Directorate, 3No.Commissariat Road, Hastings, Kolkata-700022.
Supply, Installation, Testing and Commissioning of Lifts of different Passenger Capacity at Himalayan Centre of Presidency University at Dowhill, Kurseong in the district of Darjeeling. Fresh Call. (Electrical Works).
2020_WBPWD_288262_1
WBPWD/PW(R)/SEPD/PIU-I/NIT NO-13 OF 2020-2021
Open Tender
Electrical Work/ Equipment
Item Rate
126 days
Kurseong
Please refer Tender documents.
4 documents required · 4 mandatory
₹4.9 L
Yes
Project Implementation Unit - I, P.W. (Roads) Dire
23 Aug 2021
3 Jul 2020
10 Aug 2020
4 Jul 2020
8 Aug 2020
17 Jul 2020
16 Jul 2020
Amount
MAIN ACADEMIC BUILDING SITC of automatic Machine Room Less (MRL) lift (as per manufacturer design as per detailed spectfication below conforming to IS) and putting into operation after final testing in the existing shaft complete with all accessories and reparing the damaged wall/floor if any etc to complete as required.
Make: OTIS/KONE/SCHNIDLER
Type: Passenger Lift
Load: 20 Passenger / 1360Kg.
Control: Microprocessor based with AC Variable Voltage & Variable frequency (VVVF)
Machine: Energy Efficient Machine ; Gearless without Machine Room.
Speed: 1.5 M/s
Floor Served: G + 5
Landing: 6; All on same sides
Total Rise: 23.40 Mtr (Approx.) (Bidder should visit the site)
Operation: Microprocessor based simplex full collective with or without attenedent.
Signals: Digital Car postion indicator, car travels direction indicator in car and at all landing with call registration indicator.
Travelling Accuracy: ± 5mm (Micro Levelling Arrangement)
Car Inside: 2000mm (W) X 1500mm (D)/As per manufacturer standerd and approved by EIC
Car Entrance: Clear Opening 1000mm (W) X 2000mm (H) protected with car door.
Car Encloser: Stainless Steel Sheet (20SWG) with hair line finish with hand rail.
Car Ceiling & Lighting: Stainless Steel with hair line finish with LED Lighting & Fan.
Car Ventilation: Pressure Fan with anodised Alluminium Grill.
Car Flooring: Decorative Granite Flooring (As per direction of EIC and according to departmental order).
Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system.
Landing Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system.
Door Opening: Automatic Power operated door with full length photocell assembly curtain sensor.
PROTECTIVE DEVICES & OTHER ACCESSORIES
ARD: Automatic Rescue device complete with dry maintenance free batteries as required for automatic evacuation to the neareast floor in case of power failure/single phasing / others.
Over Load Protection: Fully loaded with over load protection. On over loading the lift car will not start withdoor remaining open and audio display indication.
Emergency Lighting In Car: Battery operated emergency lighting in the lift car.
Intercom System: Battery operated InterCom System in Lift Car, Machine Room & Control Room.
Emergency Alarm: Battery Operated alarm bell system in Lift Car & Control Room.
Fireman Switch: Fireman Switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main Rope: As per manufacturer's standard conforming to IS.
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension: 2550mm X 2440mm
Pit Depth: 1800mm (Bidder should visit the site)
Overhead: 2400mm
Electric power supply: AC 415V, 3Phase, 50Hz terminated in machine room as per IS.
SITC of automatic Machine Room Less (MRL) lift (as per manufacturer design as per detailed spectfication below conforming to IS) and putting into operation after final testing in the existing shaft complete with all accessories and reparing the damaged wall/floor if any etc to complete as required.
Make: OTIS/KONE/SCHNIDLER
Type: Passenger Lift
Load: 20 Passenger / 1360Kg.
Control: Microprocessor based with AC Variable Voltage & Variable frequency (VVVF)
Machine: Energy Efficient Machine ; Gearless without Machine Room.
Speed: 1.0 M/s
Floor Served: G + 4
Landing: 5; All on same sides
Total Rise: 19.50 Mtr (Approx.) (Bidder should visit the site)
Operation: Microprocessor based simplex full collective with or without attenedent.
Signals: Digital Car postion indicator, car travels direction indicator in car and at all landing with call registration indicator.
Travelling Accuracy: ± 5mm (Micro Levelling Arrangement)
Car Inside: 2000mm (W) X 1500mm (D)/As per manufacturer standerd and approved by EIC
Car Entrance: Clear Opening 1000mm (W) X 2000mm (H) protected with car door.
Car Encloser: Stainless Steel Sheet (20SWG) with hair line finish with hand rail.
Car Ceiling & Lighting: Stainless Steel with hair line finish with LED Lighting & Fan.
Car Ventilation: Pressure Fan with anodised Alluminium Grill.
Car Flooring: Decorative Granite Flooring (As per direction of EIC and according to departmental order).
Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system.
Landing Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system.
Door Opening: Automatic Power operated door with full length photocell assembly curtain sensor.
PROTECTIVE DEVICES & OTHER ACCESSORIES
ARD: Automatic Rescue device complete with dry maintenance free batteries as required for automatic evacuation to the neareast floor in case of power failure/single phasing/others.
Over Load Protection: Fully loaded with over load protection. On over loading the lift car will not start withdoor remaining open and audio display indication.
Emergency Lighting In Car: Battery operated emergency lighting in the lift car.
Intercom System: Battery operated InterCom System in Lift Car, Machine Room & Control Room.
Emergency Alarm: Battery Operated alarm bell system in Lift Car & Control Room.
Fireman Switch: Fireman Switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main Rope: As per manufacturer's standard conforming to IS.
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension: 2550mm X 2440mm
Pit Depth: 1800mm (Bidder should visit the site)
Overhead: 2400mm
Electric power supply: AC 415V, 3Phase, 50Hz terminated in machine room as per IS.
FACULTY RESIDENTIAL BUILDING SITC of automatic Machine Room Less (MRL) lift (as per manufacturer design as per detailed spectfication below conforming to IS) and putting into operation after final testing in the existing shaft complete with all accessories and reparing the damaged wall/floor if any etc to complete as required.
Make: OTIS/KONE/SCHNIDLER
Type: Passenger Lift
Load: 20 Passenger / 1360Kg.
Control: Microprocessor based with AC Variable Voltage & Variable frequency (VVVF)
Machine: Energy Efficient Machine ; Gearless without Machine Room.
Speed: 1 M/s
Floor Served: G + 2
Landing: 3; All on same sides
Total Rise: 11.70 Mtr (Approx.) (Bidder should visit the site)
Operation: Microprocessor based simplex full collective with or without attenedent.
Signals: Digital Car postion indicator, car travels direction indicator in car and at all landing with call registration indicator.
Travelling Accuracy: ± 5mm (Micro Levelling Arrangement)
Car Inside: 2000mm (W) X 1500mm (D)/As per manufacturer standerd and approved by EIC
Car Entrance: Clear Opening 1000mm (W) X 2000mm (H) protected with car door.
Car Encloser: Stainless Steel Sheet (20SWG) with hair line finish with hand rail.
Car Ceiling & Lighting: Stainless Steel with hair line finish with LED Lighting & Fan.
Car Ventilation: Pressure Fan with anodised Alluminium Grill.
Car Flooring: Decorative Granite Flooring (As per direction of EIC and according to departmental order.)
Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system.
Landing Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system.
Door Opening: Automatic Power operated door with full length photocell assembly curtain sensor.
PROTECTIVE DEVICES & OTHER ACCESSORIES
ARD: Automatic Rescue device complete with dry maintenance free batteries as required for automatic evacuation to the neareast floor in case of power failure / single phasing / others.
Over Load Protection: Fully loaded with over load protection. On over loading the lift car will not start withdoor remaining open and audio display indication.
Emergency Lighting In Car: Battery operated emergency lighting in the lift car.
Intercom System: Battery operated InterCom System in Lift Car, Machine Room & Control Room.
Emergency Alarm: Battery Operated alarm bell system in Lift Car & Control Room.
Fireman Switch: Fireman Switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main Rope: As per manufacturer's standard conforming to IS.
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension: 2550mm X 2440mm
Pit Depth: 1800mm (Bidder should visit the site)
Overhead: 2400mm
Electric power supply: AC 415V, 3Phase, 50Hz terminated in machine room as per IS.
FACULTY RESIDENTIAL BUILDING SITC of automatic Machine Room Less (MRL) lift (as per manufacturer design as per detailed spectfication below conforming to IS) and putting into operation after final testing in the existing shaft complete with all accessories and reparing the damaged wall/floor if any etc to complete as required.
Make: OTIS/KONE/SCHNIDLER
Type: Passenger Lift
Load: 10 Passenger / 680 Kg.
Control: Microprocessor based with AC Variable Voltage & Variable frequency (VVVF)
Machine: Energy Efficient Machine ; Gearless without Machine Room.
Speed: 1 M/s
Floor Served: G + 3
Landing: 4; All on same sides
Total Rise: 15.60 Mtr (Approx.) (Bidder should visit the site)
Operation: Microprocessor based simplex full collective with or without attenedent.
Signals: Digital Car postion indicator, car travels direction indicator in car and at all landing with call registration indicator.
Travelling Accuracy: ± 5mm (Micro Levelling Arrangement)
Car Inside: 1300mm (W) X 1350mm (D)/As per manufacturer standerd and approved by EIC
Car Entrance: Clear Opening 900mm (W) X 2000mm (H) protected with car door.
Car Encloser: Stainless Steel Sheet (20SWG) with hair line finish with hand rail.
Car Ceiling & Lighting: Stainless Steel with hair line finish with LED Lighting & Fan.
Car Ventilation: Pressure Fan with anodised Alluminium Grill.
Car Flooring: Decorative Granite Flooring (As per direction of EIC and according to departmental order.)
Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system.
Landing Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system.
Door Opening: Automatic Power operated door with full length photocell assembly curtain sensor.
PROTECTIVE DEVICES & OTHER ACCESSORIES
ARD: Automatic Rescue device complete with dry maintenance free batteries as required for automatic evacuation to the neareast floor in case of power failure / single phasing / others.
Over Load Protection: Fully loaded with over load protection. On over loading the lift car will not start withdoor remaining open and audio display indication.
Emergency Lighting In Car: Battery operated emergency lighting in the lift car.
Intercom System: Battery operated InterCom System in Lift Car, Machine Room & Control Room.
Emergency Alarm: Battery Operated alarm bell system in Lift Car & Control Room.
Fireman Switch: Fireman Switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main Rope: As per manufacturer's standard conforming to IS.
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension: 2140mm X 1910mm
Pit Depth: 1800mm (Bidder should visit the site)
Overhead: 2400mm
Electric power supply: AC 415V, 3Phase, 50Hz terminated in machine room as per IS.
SITC of automatic Machine Room Less (MRL) lift (as per manufacturer design as per detailed spectfication below conforming to IS) and putting into operation after final testing in the existing shaft complete with all accessories and reparing the damaged wall/floor if any etc to complete as required.
Make: OTIS/KONE/SCHNIDLER
Type: Passenger Lift
Load: 6 Passenger / 408 Kg.
Control: Microprocessor based with AC Variable Voltage & Variable frequency (VVVF)
Machine: Energy Efficient Machine ; Gearless without Machine Room.
Speed: 1 M/s
Floor Served: G + 3
Landing: 4; All on same sides
Total Rise: 15.60 Mtr (Approx.) (Bidder should visit the site)
Operation: Microprocessor based simplex full collective with or without attenedent.
Signals: Digital Car postion indicator, car travels direction indicator in car and at all landing with call registration indicator.
Travelling Accuracy: ± 5mm (Micro Levelling Arrangement)
Car Inside: 1300mm (W) X 1350mm (D)/As per manufacturer standerd and approved by EIC
Car Entrance: Clear Opening 900mm (W) X 2000mm (H) protected with car door.
Car Encloser: Stainless Steel Sheet (20SWG) with hair line finish with hand rail.
Car Ceiling & Lighting: Stainless Steel with hair line finish with LED Lighting & Fan.
Car Ventilation: Pressure Fan with anodised Alluminium Grill.
Car Flooring: Decorative Granite Flooring (As per direction of EIC and according to departmental order.)
Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system.
Landing Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system.
Door Opening: Automatic Power operated door with full length photocell assembly curtain sensor.
PROTECTIVE DEVICES & OTHER ACCESSORIES
ARD: Automatic Rescue device complete with dry maintenance free batteries as required for automatic evacuation to the neareast floor in case of power failure/single phasing/others.
Over Load Protection: Fully loaded with over load protection. On over loading the lift car will not start withdoor remaining open and audio display indication.
Emergency Lighting In Car: Battery operated emergency lighting in the lift car.
Intercom System: Battery operated InterCom System in Lift Car, Machine Room & Control Room.
Emergency Alarm: Battery Operated alarm bell system in Lift Car & Control Room.
Fireman Switch: Fireman Switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main Rope: As per manufacturer's standard conforming to IS.
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension: 1650mm X 1440mm
Pit Depth: 1800mm (Bidder should visit the site)
Overhead: 2400mm
Electric power supply: AC 415V, 3Phase, 50Hz terminated in machine room as per IS.
KONE ELEVATOR INDIA PRIVATE LIMITED
SCHINDLER INDIA PRIVATE LIMITED
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .