Balance work of Store Block....Drug and Pharmacy at SKIMS Soura

Amount

Earth work in excavation by mechanical means (Hydraulic excavator ) over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (All kinds of Soil)

Carriage of materials by mechanical transport including loading, unloading and stacking.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

(1) Supply and laying dry stone soling tied hand packed including watering, hand ramming and carriage complete job.

(2) Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Centring and shuttering including strutting, propping etc. and removal of form for : (1) Foundations, footings, bases of columns, etc. for mass concrete.

(2) Suspended floors, roofs, landings, balconies and access platform.

P/L in postion machine batched and machine mixed design mix M-25 cement concrete work upto floor V level.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

15 mm cement plaster of mix in 1:6 (1 cement : 6 fine sand)

P/L in position cement concrete of specified grade excluding the cost of centring and shuttering, 1:3:6 Mix

Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab over 0.50 sqm

Providing and laying Heavy duty vitrified floor tiles in different sizes (pattern, design & thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying/fixing Ceramic Glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed by dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including sinishing the top smooth

Providing& Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality (1mm thick)

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Hot finished welded type tubes)

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade using white cement.

Providing and fixing of CGI sheets for class 3rd roofing (0.63mm thick) including cost of polymerized J/I hooks and washers with a priming coat of lead oxide complete job.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.63 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : (1) Ridges plain (600mm).

(2) Gutter .(600 mm over all girth).

Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1 : 3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement upto floor V level.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer.

Wall painting with acrylic/plastic emulsion paint of approved brand and manufacture to give an even shade including priming coat. Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on wooden surfaces including priming coat. Two or more coats on new work

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) (1) for fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

(2) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium window & ventilators shutters and partition etc with EPDM rubber/neoprene gaskets etc complete as per the architectural drawing and the directions of engineer in charge. ( cost of aluminium snap beading shall be paid in basic item) With float glass pane of 5.50 mm thickness.

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing & fixing C.P. brass bib cock of approved quality conforming to IS :8931. 15 mm nominal bore

Providing & fixing C.P. brass (Long body)bib cock of approved quality conforming to IS standerd and weight not less then 690 gms. 15 mm nominal bore

Providing and fixing 15 mm dia C.P brass angle valves for basin mixer and gyser points of approved quality conformind to is:8931

Providing & fixing of Waste pipe for Wash basins & Sinks including pvc waste fittings complete. (1) 32 mm dia

(2) 40 mm dia

Providing & fixing PTMT liquid soap container 109mm wide,125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.

Providing & fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arangement of approved quality and colour. (1) 600 mm long towel rail with total length of 645 mm , 78 mm wide and effective hieght of 88 mm , weighing not less then 190 gm.

Providing & fixing PTMT soap dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements.Weighing not less than 106gms.

Providing & fixing mirror of superior glass(of approved quality)and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. (1) Rectangular Shape 600x450mm

Providing & fixing toilet paper holder: (1) C.P.brass

Providing and fixing unplastised P.V.C. connection pipe with PTMT Nuts of approved quality,colour[for connection to Mixers & taps from angle valve. (1) 15 mm nominal bore with 45cm length.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter

Providing & Fixing of C.P. stop cock concealed of standard design and of approved make conforming to IS; 8931

Providing & fixing C.P. brass close hole basin Mixer piller Tap of approved quality and make weighing not less then 1.970 kg.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size).

Providing & fixing PTMT grating of approved quality and colour circular type 125 mm nominal dia with 25 mm waste hole

Providing and fixing C.P. brass twin coat hooks fixed on toilet door with C.P. brass screws.(Make-Jaquar-parko)

Providing and fixing health faucet with 1 m PVC tube and swivel hook including all fittings (Jaquar -Parko) complete.

Providing and fixing PVC pipes with fittings like bends, collors, elbows, T junctions, P traps, floor traps, door bends etc of various dia (of approved make complete job Prince/Finolex make) 100 mm diameter

Providing and fixing PVC pipe fittings of approved make complete job Prince/Finolex make 100mm (1) 75 mm dia

(2) 100 mm diameter

(3) 150 mm dia

(4) 50 mm dia

P/F of Khatumbund including 12mm ply backing/ jampwork/ polishing work complete job

P/F of precoated GI Metal ceiling 600x600m 0.5mm with perfortion with nrc value of 0.5mm Perforation area not less than 20% incl T frames of Steel frames/hangers etc.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

P/F High grade galvanized M. S srolling shutters with perforation including cost of rolling mechanism , side channels, locks,hood, painting /priming etc complete job (thicness of shutter 0.9)

P/F of Wire Guage in Window shutters

P/F of ACP sheets of aproved make (5 mm thick).

P/F of wardrobes made of 19 mm thick of approved quality 600 mm deep including shelves at required heights, facia to be covered with lamination 1.0 mm thick with fittings of ornamental and superior quality.

P/F of M.S jally of required wire dia and spacing as per the pattern of nursing college SKIMS including cost of MS angles flates complete.

M/S FALCON CONSTRUCTION COMPANY

M/S STEEL WOOD INDUSTRIES

M/S BHAT CONSTRUCTIONS

M/S NASEEB BUILDERS

NAZIR AHMAD HAKAK