CERTAIN REPAIR/REPLACEMENT OF MISC B/R WORKS FOR JCO/OR/CIVILIAN MD ACCN UNDER AGE B/R I OF GE SHILLONG

Amount

Demolition of plain cement concrete in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level) complete all as specified and directed.

Demolition of brick work or solid concrete block masonary or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and as directed..

Dismantling timber fillets, rails, posts rafter purlins, etc., under 40 Sqcm in sectional area complete all as specified and directed

Taking down chowkhat with shutter (without taking off shutter from the frame) n exc 1.5Sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) exc 1.5Sqm but n exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1.0 sqm each complete all as directed

Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as directed

Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each and refixing in the same opening complete all as directed.

M&L for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in surface channel and drain, complete all as specified and as directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, miltred/stopped ends etc. complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in hardstanding, path, plinth protection including finishing even and smooth without using extra cement complete all as specified and directed.

M&L for precast cement concrete block masonary with solid blocks, exc 10cm in width or girth, made out of PCC (1:3:6) type C1 using 20mm graded crushed stone aggregate, and set in cement mortar (1:6) complete all as specified and directed.

M&L for precast cement concrete solid building blocks or slabs n exc 10cm thick (with plain or interlocking joints as directed made out of PCC (1:3:6) type C1 using 20mm graded crushed stone aggregate complete in walls and set in CM 1:4 complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls and set in cement mortar 1:6 complete all as specified and directed..

M & L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in roof padding including finishing even and smooth without using extra cement complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

M&L for rolled mild steel as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed.

M&L 2nd class hard wood in scantling, wrought, timber framed and fixed complete all as specified and directed.

Fixing only 2nd class hard wood in scantling, wrought, timber framed and fixed complete all as specified and directed. (NOTE: Serviceable timber scantling obtained from dismantling under Srl item No. 2 here-in-above shall be reused under this item)

M&L for 20mm thick 2nd class softwood clean sawn boards or planks, width n exc. 25 cm as in wooden flooring complete all as specified and directed.

M&L for 40mm thick 2nd class softwood clean sawn boards or planks, width n exc. 25 cm as in wooden flooring complete all as specified and directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

M&L for 2nd class hardwood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed.

M&L for 2nd class hardwood glazed and skeleton shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); fitted to chowkats complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F prelam solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam sheet , PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : Any damage caused to existing flooring while fixing frames shall be made good by the contractor to match with existing floor without any extra cost)

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F for 75mm Butt hinges, mild steel medium weight, cold rolled and fixed complete all as specified and directed

S&F for 100mm Butt hinges, mild steel medium weight, cold rolled and fixed complete all as specified and directed

S&F 100mm stainless steel butt hinges with mild steel hinge pin complete all as specified and directed.

S&F 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 200mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for Brass Mortice lock,vertical type, 4 levers 100mm size complete all as specified and directed.

S&F for 50mm dia cupboard polished hardwood knobs fixed with screws complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F in repair Aluminium extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight between 61 to 80 kg and fixed all as specified (ISI Marked)

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S&F 300mm long MS Helical door spring Welded to steel /Fixed to wooden door frame including roller and roller plate etc of approved quality complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with fixed in alumnium frame including rubber packing and aluminijum beading n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F for 3mm thick Figured glass, pin head type and glazing with fixed in alumnium frame/ oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 4.8mm thick sheet glass, ordinary quality and glazing with fixed in alumnium frame including rubber packing and aluminijum beading n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 5.5mm thick sheet glass, ordinary quality and glazing with fixed in alumnium frame including rubber packing and aluminijum beading exc 0.5 Sqm in each pane complete all as specified and directed.

S&F12mm thick prelaminated particle board, interior grade prelaminated both side with decorative choice laminations ,fixed with screw etc complete all as specified.

S&F 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 12mm thick Plywood, grade BWR, type BB, No of ply 07, fixed with screws to timber frame work complete all as specified and directed.

S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc. 13 & n. exc. 25 Sqcm complete all as specified and directed.

S & F Continuous (piano) hinges, brass, Width of flaps 30mm (when open) complete all as specified and directed.

S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed

S&F Extruded brass handles, 100 mm size, fabricated type, polished all as specified and as directed

S&F for 50mm dia cupboard polished hardwood knobs fixed with screws complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for 4mm E-board, 600x600 mm, prepainted fibre board, designer/decorative type with design as approved, fixed or laid/inserted in aluminium frame work in ceiling, flat or sloping, complete all as per manufacturer instruction and as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic tiles, light shade, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Ditto all as per item No.73 here-in-above but in vertical surfaces such as skirting/dados, laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L for Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for paving vitrified ceramic colour tiles (heavy duty tile) of size 400 mm x 400 mm x 10 mm thick as in path etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles laid over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

All as per Item No. 78 above but as in vertical surfaces such as wall, skirting and dado etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tiles over and including 10 mm thick backing course in cement sand mortar (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L for machine pressed pre polished chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 18/20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite complete including dismantling the existing slab all as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. including removal of rubbish from site of work complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 in two layers, first 10 mm thick base layer & finishing 5 mm thick with approved water proofing compound @ 3% by the weight of cement or as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately here-in-after.

Supply on integral water proofing compound.

M&L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.

M&L Complete removal of existing treatment on wall and applying 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coat of oil bound distemper using roller complete all as specified and directed.

M & L for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old painted concrete surfaces with two coats of synthetic enamel paints complete all as specified and as directed

M&L French polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new/old works with two coats complete all as specified and as directed

M & L for preparation of old treated steel surface of roof of any description exceeding 10cm width or girth and spray painting one coat of synthetic enamelled paint complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old wooden Surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Cutting chases, pinning in concrete block work making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. complete all as specified and directed.

S&F in repairs 15mm dia Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm dia angular stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provision of lime concrete bedding complete all as specified and directed.

S&F in repairs Vitreous China Wash Hand Basin of size 550 x 400 mm, white with pedestal including cutting or pinning in ends of brackets or erecting stand, waste coupling and 32 mm dia waste pipe complete all as specified .

S&F in repairs vitreous china urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and directed. .(Minimum weight 40gms)

S&F in repairs vitreous china urinal partitions slabs terminating about 40cm above floor line, fixed in repairs complete all as specified and directed.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs chromium plated soap dish holder complete all as specified and directed.

S&F in repairs towel rack 600mm long with lower hangers , stainless steel complete all as specified and directed. (Model No. Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag/Hindware)

S&F in repairs Brass CP 2-in-1 bib cock with flange complete all as specified and directed. ( Model No. Jaquar Cat Part No:- ORP-10041PM or equivalent in Marc/Hindware/Parryware)

S&F in repairs 15 mm bore CP Hand Shower (Health Faucet) with 1m long easy flex tube in chrome finish & wall hook complete all as specified and directed. ( Model No. Jaquar Cat Part No:ALD-565 or equivalent in Marc/Hindware/Parryware).

S&F in repairs soap dish holder complete all as specified and directed. ( Model No. Jaquar Cat Part No:- AKP-35731P or equivalent in Marc/Hindware/Parryware).

S&F in repairs towel ring square shape stainless steel complete all as specified and directed. (Model No. Jaquar Cat Part No:- AKP-35721P or equivalent in Marc/Hindware/Parryware).

S&F in repairs corner glass shelf with bracket complete all as specified and directed. (Model No. Jaquar Cat Part No:- ACN-1173 or equivalent in Marc/Parryware/Prayag

S&F in repairs CP over head shower square shape of size 150x150mm with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange complete all as specified and directed. ( Model No. Jaquar Cat Part No: OHS-CHR-1619 & Jaquar Cat part No: SHA-455L400 or equivalent in Marc/Hindware/Parryware).

S&F in repairs CP Hand shower 27x27 mm square shape single flow with air effect (ABS body & face plate chrome plated) with Rubit cleaning system with flexible tube in chrome finish 1.5 m long with nuts complete all as specified and directed. ( Model No. Jaquar Cat Part No: HSH-35537 & SHA-571 or equivalent in Marc/Hindware/Parryware).

S&F in repairs shower panel made of black tempered glass body with 2 ABS body massage jet and over head shower with shower arm including hand shower with flexible hose and brass spout and glass shelf complete all as specified and directed. ( Model No. Jaquar Cat Part No: JPL-BLK-GO842JAX or equivalent in Marc/Hindware/Parryware).

S&F in repairs 20mm dia harrison rails (curtain rails), mild steel chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S&F in repairs double curtain end brackets, chromium plated with wooden finished, fancy type suitable for 20mm dia curtain rails complete all as specified and directed.

S&F 32mm dia low density polyethylene pipes of pressure rating 6 kgf/sq. cm complete all as specified and directed.

S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylindrical vertical type with closed top) placing in positionand fixed including dismantling old unserviceable water tank complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylindrical vertical type with closed top) placing in positionand fixed including dismantling old unserviceable water tank complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and directed.

S & F 75mm bore sand cast iron soil, waste and vent pipe, in any length with or without ears with cement joint fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends, any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius with access doorcomplete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) reducer 110mm dia complete all as specified and as directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from PVC/RCC/MS over head tanks using wire brush, bleaching powder or lime etc. of required quantity and washing with clean water inside tank and from mouths of circulating pipes. etc after disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc 250 nexc 500 ltrs including writing "TC on -DD/MM/YY" with white synthetic enamel paint with 5cm font in capital letters complete all as specified and directed..

Cleaning and removing all scale and dirt etc. from PVC/RCC/MS over head tanks using wire brush, bleaching powder or lime etc. of required quantity and washing with clean water inside tank and from mouths of circulating pipes. etc after disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc 500 nexc 1000 ltrs including writing "TC on -DD/MM/YY" with white synthetic enamel paint with 5cm font in capital letters complete all as specified and directed..

S K Construction

M/S Mani Construction