REPAIR TO DRAIN/PATH/FENCING AT CHHEOKI

Amount

Demolition brick work built in cement mortar including quoins , arches pillar etc all as directed by Engineer-in-charge

Taking down old damage cement plaster of any description racking out out joints hacking for Key, scrubbing down with water complete.

Dismantling posts or struts ( wood, steel, RCC ) of any section including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling of chain link fencing of any mesh size and any gauge from angle posts complete all as specified and directed.

Dismantling structrural steel work including doors, gates but excluding framed trusses.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete ( reinforced) of any description)

M&L Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6.

All as per Ser item No 8 here in above but except bricks

M&L for 15mm thick rendering on fair faces of brick work in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L Preparation of new or previosly untreated surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified

Excavation in post holes, n, exc 0.5 Cum getting and removing surplus soil to a distance n. exc. 50m complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in post holes, filling and mass concrete complete all as specified and directed.

S&F mild steel work with angle iron, flat iron, channel etc. as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only chainlink MS galvanised fencing any size or type.

fixing only chain link fencing galvanised, standard type, of any mesh size and any gauge GI wire fixed on angle posts complete all as specified and directed. Note: Old servicable chain link fencing obtained from item No above shall be reused

S&F in repar Galvanised. 2 strand, stee barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified & directed. (each line wire to be measured)

S & F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long,12mm dia complete all as specified & directed.

S& F Framed work as in doors or gates of angle or other section with gusset plates, rails , braces etc complete

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for factory made coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 necessary PCC if required and including dismantling complete all as specified and directed (colured rubble moulded glassi).

M&L for bricks sub class 'B' (old size bricks), laid on edge jointed and pointed in cement motor 1:4 all as specified and directed.

M&L for 60mm thick M-35 grade factory made coloured vibratory compected cement concrete rubber moulded, interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved necessary PCC if required and including dismantling complete all as specified and directed.(colured rubble moulded glassi)

M&L for 80 mm thick M-35 grade factory made coloured vibratory compected cement concrete rubber moulded, interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved necessary PCC if required and including dismantling complete all as specified and directed.(colured rubble moulded glassi)

M&L 25mm thick sand cushion and joints filled with sand complete all as specified and directed.

Cleaning of mud bushes etc of any width and depth from the storm drain complete.

M&L for cement concrete type c2 1 :3:6 ( 40 mm graded aggregate) for drains

M&L for providing cement concrete type B-1 1:2:4 ( 12.5 mm graded aggregate) as in coping

Providing precast cement conctrete drain covers type B-I 1:2:4 ( 20mm graded aggregate set in cement mortar 1: 6

TMT bars 10mm dia and over cut to length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire( annealed) nopt less than .9 mm dia or securing clips.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete.

M/S PRAGATEE ENTERPRISES

M/s SINGH CONTRACTOR WORKS

M/S NAGENDRA AND BROS ENTERPRISES

M/S Garg Sons

Siddhi Constructionn

Technological Associates

DINESH ELECTRICALS