Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹41.1 L
Closing Date
13 Apr 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
Yes
30/03/2026 11:30
Lowest to Highest
90 days
Expenditure
Capital (Works)
17 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less: where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar nature of work for Engineering work is defined as "Any civil engineering work involving fabrication and erection of structure steel/Prefabricated Buildings"
NOTE-Building work would means any structure constructed of any material (i.e. Masonry, RCC, PSC, Steel etc) and with enclosed space and will include all load bearing building, RCC/PSC buildings, industrial/ commercial sheds constructed of steel / concrete etc..
Regarding technical and financial eligibility criteria, scanned copies of supportive documents/certificates from competent officials are to be submitted along with their offer.
Scanned copies of documents in support of formation/registration of the company/firm/legal authorization of the person to deal with the tender/notarized/registered copies of the documents wherever required as per tender conditions are to be submitted along with offer.
(a)The tenderer must have successfully completed/substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed/substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works , each costing not less than the amount equal to 40% of advertised value of each component of tender, or a One similar work, each costing not less than the amount equal to 60% of advertised value of each component of tender.
8 conditions · 2 needing a document upload
If the tenderers deliberately gives/give wrong information in his/their tender or creates/create circumstances for the acceptance of his/their tender, the Railway reserves the right to reject such tender at any stage.
The tenderers shall keep the offer open for a minimum period as mentioned in NIT from the date of opening of the tender, within which period the tenderers can not withdraw their offer, subject to the period being extended further if required, by mutual agreement from time to time. Any intervention of the above condition will make the tenderer liable for forfeiture of his security deposit for due performance of the foregoing stipulation
The quantities shown in above Schedule are approximate and are as a guide to give the tenderer(s) an idea of quantum of work involved. The Railway reserves the right to increase/decrease and/or delete or include any of the quantities given above and no extra rate will be allowed on this account
All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
A statement showing construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) taking into account the completed as well as work in progress as per IRGCC-2022 on the letter head of Chartered Accountant, to evaluate bid capacity of the tenderer (Mandatory for tender value more than Rs. 10 Crores). In case of JV firm details of construction works executed by each member of JV is required to be submitted.( As per ACS No-11 Dated-13.03.2026 of IRGCC-2022)
The tenderer should submit the List of works on hand, existing commitments and balance amount of ongoing works as per proforma given in 'Annexure-VI to evaluate bid capacity of the tenderer, duly verified by the Chartered accountant (Mandatory for tender value more than Rs. 10 crores)
Providing full length platform shelter on each platform of Beawar, Sojat Road and Marwar junction stations in AII- PNU section of Ajmer division
GSUAII-PFshltRe-01-2026
GSUAII-PFshltRe-01-2026
Open
Works - General
6 Months
Ajmer, Rajasthan
₹0
₹41.1 L
13 Apr 2026
23 Mar 2026
30 Mar 2026
30 Mar 2026
26 items across 2 schedules · ₹19,53,14,953.11 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 6015.63 | 177.5 | 10,67,774.33 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 1640.63 | 196 | 3,21,563.48 |
| 3 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 164.07 | 7,294.7 | 11,96,841.43 |
| 4 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 1312.5 | 392.15 | 5,14,696.88 |
| 5 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 2187.5 | 961.3 | 21,02,843.75 |
| 6 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 131250 | 107.85 | 1,41,55,312.5 |
| 7 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 1093.75 | 9,655.7 | 1,05,60,921.88 |
| 8 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 437.5 | 733.5 | 3,20,906.25 |
| 9 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 218.75 | 9,275.45 | 20,29,004.69 |
| 10 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 16406.25 | 117.35 | 19,25,273.44 |
| 11 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 54687.5 | 133.7 | 73,11,718.75 |
| 12 | Hot finished welded type tubes | Kg | 601562.5 | 194.4 | 11,69,43,750 |
| 13 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg | 27343.75 | 97.2 | 26,57,812.5 |
| 14 | Providing and fixing bolts including nuts and washers complete. | Kg | 27343.75 | 159.35 | 43,57,226.56 |
| 15 | 25 mm thick | Sqm | 3281.25 | 1,948.25 | 63,92,695.31 |
| 16 | 1.60 mm thick with zinc coating not less than 350 gm/m2 | Metre | 1312.5 | 1,863.9 | 24,46,368.75 |
| 17 | 110 mm diameter | Metre | 1093.75 | 377.4 | 4,12,781.25 |
| 18 | 110x110x110 mm | Each | 110 | 221.35 | 24,348.5 |
| 19 | 110 mm bend | Each | 110 | 150.35 | 16,538.5 |
| 20 | 110 mm Shoe | Each | 110 | 131.85 | 14,503.5 |
| 21 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 15750 | 738.65 | 1,16,33,737.5 |
| 22 | Two or more coats on new work | Sqm | 13125 | 146.8 | 19,26,750 |
| 23 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 437.5 | 2,434.25 | 10,64,984.38 |
| 24 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 2187.5 | 263.95 | 5,77,390.63 |
| 25 | 150 mm diameter | Metre | 656.25 | 695.8 | 4,56,618.75 |
| Schedule total | ₹19,04,32,363.51 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022-ACS10.pdf
ATTACHMENT
download203.pdf
ATTACHMENT
RDSONewPassengerplatformshelterof12mspanalongplatformwithtubularsectionPlatformShelterwidth10.45m.pdf
ATTACHMENT
GENERALCONDITIONFORTHEWORK.pdf
ATTACHMENT
safetyatworkssite.pdf
ATTACHMENT
Telecomletter.pdf
ATTACHMENT
ProcedureorderforMeasurementTestCheckpssa.pdf
ATTACHMENT
TenderDocument-1.pdf
ATTACHMENT
Nodeplomentofengineer.pdf
ATTACHMENT
GCCACS1141.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .