CERTAIN BR REPAIRS TO JOINERIES PLUMBING SANITARY FITMENTS INCLUDING PETTY REPAIRS TILLING IN OFFRS MD ACCN AT 2003 STN UNDER AGE BR AF GURGAON OF GE AF GURGAON

Amount

Taking down Shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and as directed.

Taking down Chowkat or frames with shutters(without taking off shutters from the frames) exc 1.5 but n.exc 4.00 sqm each complete all as specified and as directed.

Taking down and romoving Chowkats or frames not exc. 1.5 sq.m with shutter (without taking off shutters from the frames) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.Note the area includs in this up to 4th stories building complete all as specified and as directed.

S&F Aluminium anodized powder coated Window Double Shutters Glazed and Gauged of Stainless Steel Wire Cloth having nominal dia of Wire 0.36mm and average width of aperture 1.40mm along with Aluminium Section with 50 micron anodizing size of Frame 125x44.5mmx16 gauge having size of Shutter, Top/ Bottom/central Rail shall be 44.5x44.5mm x16 gauge Aluminium Section with 50 micron anodizing and 5.5mm thick Black/ Tinted Sheet Glass to be fixed on Glazed Portion including Aluminium Grill and Stainless Steel Hooks and Eye to be provided as stay of Shutters, etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, Screws anodized Aluminium Fittings such as Peg Stay 150mm long (1 No. for each Leaf), Hinge Type B-21 of 100mm long (2 No. for each Leaf), suitable Handle (1 No. for each Leaf) and 100mm Aluminium Tower Bolts (2 No. in each Leaf), complete all as specified and as directed. NOTE : (a)Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate. (b)For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit.

S&F pressed steel frames 1.25mm thick for door size of frame105 X 60mm with single rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and as directed by Engineer-in-charge.

S&F in repairs Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall becovered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottim rail. Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS Square tub, suppling & fixing in opening as per specification and drawing complete all as specified and as directed.

S&F 100mm Butt hinges, meduim weight, cold relled mild steel and fixed complete all as specified and as directed.

S & F for aluminium anodised, barrel tower bolts of extruded section 125mm long and fixef complete all as specified and as directed.

S&F 30 mm thich 2nd class Hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, guaze etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securiing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and as directed.

S & F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of exctruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S & F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M&L for Glazed coloured ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed .

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4 complete all as specified and as directed.

S*F 4mm thick sheet glass , ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and as directed.

M&L for Vitrified ceramic light shade tiles, 10 mm thick (square/ rectangular) polished ,area of each tile not exc. 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and jointed in cement mortar complete all as specified and as directed.

M & L for 20mm thk prepolished granite stone slabs in steps, jambs,pillars,windows cills,cooking platforms, floors and the like laid over cement mortar 1:4, 15 mm thick set and jointed in neat cement slurry and pointed in white cement with pigment to match complete all as specified and as directed.

M&L for Rough cast plaster on brick walls consisting under coat of cement and sand mortar 1:3 not less than 10mmm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed of size 6mm with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even completed all as specified & as directed by Engr-in-charge.

M&L for 25mm thick Cement concrete 1:2:4 type B-O(using 12.5mm graded aggregate) as in flooring, finished surfaces even and smooth without using extra cement complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified and as directed.

Taking up or down steel tubing 20mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified and as directed.

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F in repairs 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed with cup for iron pipe or for brass ferrule and fixed (Make : Jaquar, Modle no FLR-5047 , Cera-F1018151 or equivalent) complete all as specified and as directed

S & F in repairs 15mm bore Stop Valve/ angle valve fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends with cup for iron pipe or for unions and fixed ( Make : Jaquar, Modle No- FLR- 5053N Cera-F2004351or Equavelant) complete all as specified and as directed.

S & F in repair 15 mm bore fancy type chromium plated , cast copper alloy single liver sink mixture with swinging spout on uper side (wall mounted module) with cinnecting legs & wall flange (Make : Jaquar, Modle no FLR-5165 Cera-F1018501or equivalent) complete all as specified and as directed.

S & F in repairs 15mm bore Pillar taps central hole Basin mixer with regular spout without popup waste system with 450 mm long braided hosedd 20 mm carttridge size fancy type, cast copper alloy, chromium plated, complete all as specified and as directed.(Make : Jaquar, Modle No FLR-5167NB ,Cera-F2010461or equivalent) or equivalent out of makes specified in list of makes.

S & F in repair 15mm bore brass CP wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting & wall flange fancy type, cast copper alloy,chromium complete all as specified and as directed. (Make : Jaquar, Modle no FLR-5273UPR,Cera-F1014401or equivalent out of makes specified in list of makes.

S & F in repair single towel rall 450mm long fancy type chromium plated fixed with PVC plug and steel screw complete all as specified and as directed. (Make : Jaquar, Modle no ACN-111 or equivalent out of makes specified in list of makes.

S & F in repair towel ring round with round flange fancy type cromium plated fixed with PVC plug and steel screw complete all as specified and as directed. (Make : Jaquar, Modle no CAN-1121 or equivalent out of makes specified in list of makes.

S & F in repair shop dish Holder chromium plated (Make : Jaquar, Modle No CAN-113N or equivalent out of makes specified in list of makes.) complete all as specified and as directed.

S & F in repair towel rack 600 mm long without lower hanger but with three hooks, fancy type chromium plated (Make : Jaquar, Modle No CAN-1181FHN or equivalent out of makes specified in list of makes.) complete all as specified and as directed.

S& F in repair corner glass shelf (with bracket) fixed with PVC plug and steel screw (Make : Jaquar, Modle CAN-1173 or equivalent out of makes specified in list of makes.) complete all as specified and as directed.

S & F in repair toilet roll holder with flap, chromium plated fixed with PVC plug and steel screw (Make : Jaquar, Modle No CAN-1153N or equivalent out of makes specified in list of makes.) complete all as specified and as directed.

M & L in repair for hand shower (health faucet) with 8mm dia 1.20 mm lonf flexible tube and wall hook (Make : Jaquar, Modle No-ALD-573or equivalent out of makes specified in list of makes.) complete all as specified and as directed.

S & F for PVC conection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S & F in repair maze overhead shower dia 150 mm round shape single flow (body & face plate stainless steel with chrome finish with rubit cleaning system Make : Jaquar, Modle OHS-CHR-1603 or equivalent) complete all as specified and as directed.

S & F in repairs Vitreous Chine wash down water closet pan single piece with UF seat cover hinges, fixing accessories set, cistern fitting of size 365x655x760 with S trap (Make : Jaquar, Modle LYS-WHT-38851S , Cera-S1013119 or equivalent) complete all as specified and as directed.

S& F in repair Vitreous China full pedestal wash basin, white, flat back, size 565x435x215mm excluding taps but including 32mm dia chromium [plated easte fitting and PVC waste pipe 610 mm long (Make : Jaquar, Modle No-FLS-WHT-5801or equivalent) complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and smooth without using extra cement.Note the area includs in this up to 4th stories building complete all as specified and as directed.

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:4 finished surface even and smooth without using extra cement. Note the area includs in this up to 4th stories building complete all as specified and as directed.

M&L for 10mm thick Rendering on ceiling surface fair faces of brick work or concrete sureces in Cement Moratar 1:3 finished surface even and smooth without using extra cement. Note the area includs in this up to 4th stories building

S& F in repair stain less steel decorative cutrain rod of 25 mm bore inluding 2 nos steel finale and bracket 02 nos etc and fixed to wall with plastic rowl plug and steel screw complete all as specified and as directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden frames or metal frame including punching or drilling out old glazing pin/ spring clip or glazed with oil putty or fixed with window beads complete all as specified and as directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square n exc 0.5sqm each pane complete all as specified and as directed.

M & L for a coat of alkali resistant over already prepared surface of wall complete all as specified and as directed.

M &L for prepepring the entire surface with appliying 2-3 mm thick putty on wall surface in external or internal surface finished even and smooth complete all as specified and as directed.

M & L for preparing old plaster surface applying one coat acrylic emulsion , white or tinted on wall surface with roller brush complete all as specified and as directed.

M & L for new plaster surface applying two coat acrylic emulsion , white or tinted on wall surface with roller brush complete all as specified and as directed.

M & L for prepring old plaster surface applying one acrylic emulsion , white or tinted on ceiling surface with roller brush complete all as specified and as directed.

M & L for new plaster surface applying two coat acrylic emulsion , white or tinted on ceiling surface with roller brush complete all as specified and as directed.

M & L for prepring old plaster surface and applying one coat of cement base paint on wall surface complete all as specified and directed.

M & L for prepring new plaster surface and applying two coat of cement base paint on wall surface complete all as specified and as directed.

M&L for complete removal of existing treatment on walls including washing down, rubbing down and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed.

M&L for Preparing old painted surfaces of wood of any description, not otherwise described, over 10cm width or girth and one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparing old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enemal paint complete all as specified and as directed.

Dismantling of boarding fix with screws as in kitchen cabnit/ cup board/ partition/ shutteretc and simlar work complete all as specified and asdirected.

S&F Plain (White) PVC Board Scratch and strain free (weight not less 9 Kg/Sqm) in Door, Shelves for Cup Boards or Kitchen Cabinets, one side laminated, 18/19mm thick as required, jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, and Fixed-in-repairs,complete all as specified and as directed.

S&F Stainless Steel Silver chrome Door Handle 100mm long, suitable for fixing of Brass screws inside of the board etc, and Fixed-in-repairs,complete all as specified and as directed.

S&F Magnetic Door Catcher medium grade to hold approx 1000 mm opening cabinet door and Fixed-in-repairs complete all as specified and as directed

S&F 30mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised and Fixed-in-repairs, complete all as specified and as directed.

P R Constructions

akhil enterprises

MOHIT ENTERPRISES