DAY TO DAY/PETTY REPAIR B/R WORK AND ONLINE VYNUS COMPLAINTS AT 25ED AF STN

Amount

Demolition of brick work built in cement mortar or cement lime mortar

M&L brick work with fly ash 'bricks (FASB) confirming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified.

M&L renderig/screeding 15mm thick cment mortar 1:6 on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as directed by the Engineer - In- Charge.

M&L renderig 15mm thick cment mortar 1:4 on other than fair faces of brick or concrete surface of wall rendering is to be finished even and smooth with out using extra cment

Materials and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primercomplete.

Materials and labour for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primercomplete.

Demolition of cement concrete (unreinfored )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed

M&L 40 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate)as in floor complete all as specified and as directed

M&L Glass dividing strips , 3 mm thick and 22 mm width as specified and as directed.

M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair complete all as specified and as directed

S&F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.

All as per ser item No 12 above but 1000 lter capacity complete all as specified and as directed

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for the following sizes:- (a) 15mm dia bore

Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for the following sizes:- (b) 20mm dia bore

Supplying and laying CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall, ceiling or laid in floor. Note :- Rate inclusive of chase cutting in stone/brick masonry of concealed tubing. (a) 15mm dia bore

Supplying and laying CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and fixed to wall, ceiling or laid in floor. Note :- Rate inclusive of chase cutting in stone/brick masonry of concealed tubing. (b) 20mm dia bore

S& F in repair ball valve 15mm bore dia high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in newly taken tank (minimum weight 20mm 210 gm) complete all as specified

S& F in repair ball valve 20mm bore dia high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in newly taken tank (minimum weight 20mm 210 gm) complete all as specified

S&F in repairs 15mm bore bib taps cast copper alloy with crutch and butterfly handle screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).

S&F in repair 15 mm stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union and fixed complete all as specified and as directed for following sizes

S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type) complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed (Make Prayag/Polytuf)

S&F in repair PVC connection 15mm dia and 600mm long with both ends brass fly nut complete all as specified and as directed (Make Prayag/Polytuf)

Supply and fixed in repairs 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repair 32 mm dia bore of PVC waste pipe for kitchen sink and wash hand basin fixed in repair.

S&F in repair 40mm dia Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches

S & F PVC (SWR) pipes, single socketed, in any length, with rubber rings 110 mm dia as in floor/wall

S & F PVC (SWR) pipes, single socketed, in any length, with rubber rings 75 mm dia as in floor/wall

S & F PVC (SWR) vent cowl 110 mm dia

S & F PVC (SWR) bends 110 mm dia

S & F PVC (SWR) bends 110 mm dia with access door

S & F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement

S&F in repair brass chromium plated shower rose 100mm size with long body fancy type including fixing to steel pipe or union complete all as specified and as directed

S&F fancy type stainless steel chromium plated curtain rod 20 to 25mm dia with fancy knob type ends and brackets complete all as specified and directed

Taking down chowkhats or frames with shutter (with out taking off shutter from the frame)n.exc 1.5 sqm each complete all as specified and as directed

- ditto - but exc 1.5sqm and n exc 4sqm each - do -.

Taking down wooden shutters of any description exc 1 Sqm but n. exc 2 sqm each.

S&F Framed mild steel work as in gates including pintel hinges, stops, hand made sliding bolts etc. complete conforming to Fe-410-0 or Fe-310-0

Supply and fix mild steel flat iron of size 25x3 mm as in hold fasts and clamps & similar small articles confirming to Fe-410 W (Gde E-250) complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand andmanufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge

Supply and fix 35mm thick 2nd class hard wood Glazed and skeleton shutters (factory made), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge.

S&F 40 mm thick flush shutters, solid core construction, with particle board core and if both faces are covered with decorative face veneer with lipping/frame to match.

Supply and fix 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21

S&F 150 mm Floor door stopper of aiuminium alloy body and tongue, anodised, with hard drawn steel spring , fixed in floor.

Supply and fix 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

S/F 150 mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked.

Supply and fix 250 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

Material and labour for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

S&F in repair door closer hydraulically regulated designation No. 3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

S&F in repair grating doom 100mm dia including necessary cement work in floor.

S/F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

S/F in repair galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed (wooden/steel/ Aluminum frame of door/ windows/ Ventilator).

S&F mild steel work as in framed work as in grill with ends of bars shouldered and or riveted or fixed in spike, framed guard bars confirming to Fe- 410-0 or Fe-310-0 complete all as specified and as directed.

Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar

Material and labour for colour printed glazed ceramic tiles (Premium quality) 450x300x7-8mm thick as in wall,dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1 : 4) complete all as specified and as directed by the Engr-in-Charge.

Vitrified ceramic tiles 600x600x9-10mm thick, light coloured as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed layer in CM 1:6 laid over and including 25mm thick PCC 1:2:4 type B0 using 12.5mm stone aggregate sub floor complete all as specified and directed.

Vitrified ceramic tiles size 600x600x9-10mm thick, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, including 10 mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade

Machine cut Kota stone slab in floor 20-25 mm thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and nosing complete all as specified and directed.

M&L for Machine cut Kota stone slab in floor 20-25 mm thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and nosing complete all as specified and directed.

M&L for granite of any type in full length forKitchen platform, Cill, Jamp’s Gate pillar 20 mm thick machine cut bedded and jointed with grey cement sluury and pointed with white cement with admixture of pigment to match the shade over 20 mm thick screed bed (1:6) including grinding and polishing complete all as directed.

M&L for machine pressed precast concept interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment over 25 mm thick sand bed complete all as specified and as directed.

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in near cement slurry in floors over 15mm CM (1:6) thick screed bedding specified and directed by engr-in-charge.

Dismantling timber santling 40sqcm and above

M&L 2nd class hard wood as in scantling.

Dismantling AC sheet roofing with ridge (corugated or semi corrugated)

Dismantling single layer Mangalore pattern or similar tiles in roofing including ridge tiles.

M &L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry all as completed

S&F Pre-painted galvatume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified.

S&F plain galvanised 0.80 mm thick mild steel sheeting in ridges, hips, valley gutters drip and straight flashing with zink coating 275.

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with two corrugation side lap fixed with J type hook complete in repair. (upto height of 13m)

Steel work in tubular trusses including special shaped washer ect complete using ERW or induction butt welded tubes confirming to IS. 1161-1998 grade St-240.

S&F in repair PVC floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed

S&F in repair 20mm Gun metal globe or gate vlve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed

Hacking out old broken glass in any thickness size quality or description from wooden frames

S&F sheet glass 3mm thick ordinary quality and glazing with wooden beads or oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected

Materials & labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete.

S&F in repair anodised aluminium frame straight for doors / windows using aluminium section of minimum size 100x44mmx1.60mm thick fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed

Anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 5mm thick plain colour PVC sheet (Rajshree make) and 5mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed.

S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified and directed

S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Dismantling wall and ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover fillets.

M&L for aluminium anodised snap grid frame work of the following (a) Main Tee section 36.5x25x1.4mm size (wt not less than 0.24Kg/RM) (b) Section alongwith wall angle of size 40x25x2mm size (wt not less than 0.36Kg/RM) (c) Cross Tee section 23.5x26.4x1.4mm size (wt not less than 0.191Kg/RM) (d) Snap grid shall be fixed to ceiling by supporting hangers consisting of 6mm dia mild steel rod J bolts nuts and washer etc as per manufacture instructions & complete all as directed.

Materials & labour for 4 mm thick high pressure steam cured non asbestos fiber cement designer board of size 600mm x 600mm as in ceiling complete all as specified and directed with and including aluminium anodised snap grid frame.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F in repair steel ventilator with top hung shutter including hinges steel peg stay, complete including taking down old wooden ventilator.

Supply and fix in repairs Chromium Plated wall mixture with telephone shower arrangement only without crutch (with bush and piston divertor fitting) complete all as specified and as directed by the Engr-in-Charge.

Supply and fix in repairs Chromium Plated wash hand basin mixture with telephone shower arrangement only without crutch (with bush and piston divertor fitting) complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing in repair vitreous China coloured wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts, with coloured PVC seat cover and making all necessary connections complete as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in replacement stainless steel (conforming to AISI-304 grade) kitchen sink with drain board of overall size 915mm x 460mm and bowl size 410mm x 352mmx 178mm depth or equivalent made of 1mm thick stainless steel sheet with 32mm bore CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe(heavy duty) 90 cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete all as specified and as directed by the Engr-in-Charge.

Supply and fix as in repair CP corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge .

Supply and fix in replacement Chromium Plated towel ring square with round flange complete all as specified and as directed by Engineer-in-Charge.

Supply and fix as in replacement hand shower (health faucet) (ABS Chrome palted) with 8mm dia, 1m long, flexible tube with wall hook complete all as specified and as directed by Engineer-in-Charge .

S&F in repair stainless steel kitchen rack plate rack over all size 900mmx900mm make out 0.63mm thick stainless steel sheet complete all as specified and as directed

S&F 18mm thick Rajshri Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge

S&F 18mm thick Rajshri Celuka ply of grade 1 quality of one side pre-laminated & other side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet /shutters incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge

S&F 12mm thick Rajshri Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make wall mounted kitchen cabinet sides back & pull out shelves inside the cabinets complete all as per specifications and as directed by the Engr-in-Charge

S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters, Make- KAFF

S&F stainless steel handles 100mm size for kitchen cabinet shutters

S&F 28-30 mm thick Prelaminated WPC factory made 100% Sketon/Glazed door (conforming as per IS-4020) shutter made from 100% lead free single extruded on both side with wood grain texture and with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F stainless steel 20mm dia, 600 long towel rail of 304 grade.

Hacking out old broken glass panes (any thickness size quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each all as directed

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty not exe 0.5 sqm in each pane.

S&F in repair Toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws

N.U. MIRZA (BID ID -3482243)

M/S KANNANS (BID ID -3482847)

SHREE SAMARTH SERVICES (BID ID -3478555)