Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹8.4 L
EMD Value
₹8,360
Closing Date
24 Feb 2020, 2:00 pmClosed
Er. Manjeet Singh
Executive Engineer PWD RNB Division Kishtwar
Please refer BOQ
2020_PWDJK_93029_1
e-NIT No. 36 of 2019-20 Dated 17/02/2020
Open Tender
Civil Works
Item Rate
25 days
KISHTWAR
Please refer NIT
3 documents required · 3 mandatory
₹600
Executive Engineer PWD RNB Division Kishtwar
₹8,360
Yes
16 Mar 2020
18 Feb 2020
25 Feb 2020
18 Feb 2020
24 Feb 2020
18 Feb 2020
Amount
Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : (Including all leads, lifts and Carriages).
All Kinds of soil
Random Rubble masonry with hard stone from qyarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with cement mortar 1:6 (1 Cement: 6 fine sand) (Including all leads, lifts and Carriages).
Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size Crushed (Including all leads, lifts, & carriages)
Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 fine sand) (Including all leads, lifts, & carriages)
Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) (Including all leads, lifts, & carriages)
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel of 1.25mm/1.60mm thickness including hinges jamb, lock, jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm/ 1.60mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charrge: Profile A:- Sheet of 1.25mm thickness and base ties of 1.25mm. (Including all leads, lifts, & carriages)
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. First class kail wood (Including all leads, lifts, & carriages)
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. (Including all leads, lifts, & carriages)
Coir veneer board (conforming to IS 14842) 12mm thick
Float glass panes 4 mm thick glass panes
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) (Including all leads, lifts, & carriages)
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) Crushed (Including all leads, lifts, & carriages)
Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.Crushed. (Including all leads, lifts, & carriages)
Strctural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Including all leads, lifts, & carriages)
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Second class kail wood (Including all leads, lifts, & carriages)
Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 4mm thick (Including all leads, lifts, & carriages)
Providing and fixing plained eaves boarding. 250x32 mm (nominal size) (Including all leads, lifts, & carriages)
White washing with lime to give an even shade. New Work (three or more coats) (Including all leads, lifts, & carriages)
Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade (Including all leads, lifts, & carriages)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Including all leads, lifts, & carriages)
Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2 (Including all leads, lifts, & carriages)
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2 (Including all leads, lifts, & carriages)
Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) (Including all leads, lifts, & carriages)
Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm (complete job)
Providing and fixing wooden moulded corner beading of triangular shape to the junction of panneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete . Second class kail wood (complete job)
Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: 20 mm dia. nominal bore Medium (complete job)
15 mm dia. nominal bore Medium
Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore (complete job)
Providing and fitting of PVC pipes in all complete Job
Providing and Fixing P-trap (Complete Job)
Providing and Fixing S-trap (Complete job)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring,shuttering, finishing and reinforcement with 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) (Including all leads, lift & carriages)
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Mild steel and medium tensile steel bars (Including all leads, lift & carriages)
Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap. (complete job)
Providing and fitting of Electrification of approved quality (complete job).
Providing and fitting of Fan of approved quality (Complete job)
Providing and fitting of CFL 9 watt. (Complete job)
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : In cement mortar (Including all leads, lift & carriages)
Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead Including all leads, lift & carriages)
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of G.S. Sheet Including all leads, lift & carriages)
Providing and laying 80mm thick precast Interlock Tiles over 20 mm thick layer of sand filling of joints with cement mix 1:6 complete (Including all lifts leads and carriages)
saphire group of construction
FARIDIA CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .