Repair renovation to various residential buildings under Division No III Shimla. SH PL water pipeline, providing water storage tanks construction of toilets in Oakover at Benmore section under Benmore Sub division

Earth work (Cutting) in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:- 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size.)

Constructing manhole with R.C.C top slab in 1:2:4 mix in 1 cement 2 sand 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement 4 sand 8 graded stone aggregate 40mm nominal size inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1cement 2 sand 4 graded stone aggregate 20mm nominal size) finished smooth complete including curng and testing:- inside size 600mm x 600mm and 800mm deep including 455x610mm dia precast R.C.C. covers of NTC make or equivalent manhole cover with frame (medium duty) with 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials within all leads and lifts.

Providing and laying ceremic floor tiles of approved size, shade,design and quality in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement: 4 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials in all leads and lifts.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Providing and fixing high pressure PVC Finolex spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of materials within all leads and lifts. 110mm

Providing and fixing PVC finolex Plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. 110mm

Providing and fixing high pressure PVC Finolex Door bend ISI marked including fixing with approved adhesive etc complete including carriage of materials within all leads and lifts. 110mm

Providing and fixing 110mm nominal size PVC Finolex plain tee ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 110mm X 75mm size PVC Finolex floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads an lifts.

Providing and fixing 110mm nominal size PVC Finolex collar ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.

Providing and placing on terrace (at all floor levels) 2000 litre polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge Concealed work, including cutting chases and making good the wall etc 1620 (20 mm OD) pipe including carriage of materials within all leads and lifts.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15 mm nominal outer dia Pipes

Providing and fixing G.I. Tee in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15mm nominal bore

Providing and Fixing gun metal gate valve with PVC liver 15mm including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing ball cock with float ball 15mm nominal dia complete including carriage of material with in all leads and lifts

Providing and Fixing G.I Non Return Valve 15mm of approved brand including carriage of materials within all leads and lifts.

Providing and fixing G.I. Socket in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15mm nominal bore

Providing and fixing G.I. Elbow in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15mm nominal bore

Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15mm nominal bore

Disposal of building rubbish/ malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 mm initial lead, for all leads including all lifts involved.

Providing and fixing vitreous china Orissa pan wash down, water closet squatting pan (Indian type W.C. Pan) size 580mm (Earth work, bed concrete, and trap to be measured and paid for separately) including carriage of material within all leads and lifts and as per the direction of the Engineer-in-Charge

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.including carriage of materials within all leads and lifts HINDWARE MAKE

Providing and fixing 15mm dia C.P.brass Angle cock of approved quality including carriage of materials within all leads and lifts.

Providing and fixing 15mm dia C.P.brass Bib cock of approved quality including carriage of materials within all leads and lifts.

Providing and fixing 60cm length PVC connection pipe with brass unions 15 mm nominal bore complete including carriage of materials within all leads and lifts.

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads and lifts

Providing and fixing C.P. Brass extension nipple (size 15mmx25mm) of approved make and quality as per direction of Engineer-in-charge