Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹28.9 L+₹3.5 L (13.8%)Rejected-AOC 93 SRP KOVIL STREET PERAVALLUR CHENNAI 600 082 | CHENNAI | CHENNAI | TAMIL NADU | 600082 | L2 | Rejected-AOC Not Being L1 | |
| 3 | L3₹30.7 L+₹5.3 L (20.7%)Rejected-AOC NO 21 BRAMIN STREET KORATTUR CHENNAI 600080 | CHENNAI | CHENNAI | TAMIL NADU | 600080 | L3 | Rejected-AOC Not Being L1 |
Tender Value
₹26.5 L
EMD Value
₹53,000
Closing Date
21 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Avadi
Garrison Engineer, Muthapudupet, Avadi, Chennai
PROVISION OF CERTAIN MINOR WORKS AND ALLIED SERVICES IN DQA (CV) COMPLEX UNDER GE AVADI
2024_MES_642487_1
8175
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer, Muthapudupet, Avadi, Chennai
Please refer tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer, Avadi
₹53,000
Yes
12 Jul 2024
15 Feb 2024
30 Mar 2024
15 Feb 2024
21 Mar 2024
1 Mar 2024
Amount
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/ dence soil all as specified and directed.
Excavation in post holes or (Similar holes) each n.exc 0.5cum, getting out, returning filling in and ramming earth or broken rubber mixed with earth around in layers, n.exc 25 CM watering and removing surplus soil to a distance n.exc 50m and making good surfaces in hard/ dense soil all as specified and as directed.
M&L for PCC 1:3:6 type C2 using 40mm graded Stone aggregate as in foundation of post holes filling and mass concrete all as specified and directed.
S&F mild steel Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe 410-W (Gde E-250) Quality all as specified and as directed.
S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of Fe-410-W (Gde-E-250) quality ‘A’ complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed wih self tapping screws as specified
M & L for Preparation of new steel surfaces over 10cm width or girth not other wise described and applying two coats of synthetic enamal paint over a coat of red oxide primer all as specified.
M&L for 100mm thick plain Cement concrete 1:5:10, type E2, using 40 mm graded crushed stone aggregate as in sub base in path / hardstanding all as specified and as directed.
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over 15mm thick screed bed of CM1:4 all as specified and as directed.
M&L for Brickwork with fly ash Old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed
M&L for 15 mm thick Rendering on other than fair faces of brickwork surface in CM 1:4 finished even and smooth without using extra cement mixed with WPC @ 3% by weight of cement and finishing all as specified and directed. Note :- water proofing compound measured and paid seperately.
M&L for 100mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate and complete as in sub base of flooring all as specifed and directed.
M&L for 40 mm thick PCC 1:2:4 type B1, using 20 mm graded stone aggregate as in flooring, finished even and smooth without using extra cement all as specified and as directed.
Material and labour for precast Reinforced cement concrete in 1:2:4 type B1 using 20mm graded stone aggregate set in cement mortar 1:6 as in landings, cover slabs chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face including necessary form work complete all as directed. Note:- Reinforcement shall be measured and paid seperately.
M&L for milid steel TMT bars 6mm dia to 8mm , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) or securing with clips etc complete all as specified and directed
M&L for mild steel TMT bar of 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing clips complete all as specifed and as directed.
Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) all as directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed.
M & L for Plain cement concrete 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, copings,pintle hinges, plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work, all as specified.
M & L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in flooring, subbase to floors complete all as specified and a directed.
M&L for joint free Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for Glazed ceramic coloured tiles size 300x200mm x 6 to 7mm thick, as in vertical surfaces such as in skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM 1:4, complete all as specified and directed.
S&F Steel work in tubular trusses including special shaped washer etc.,complete using ERW or induction butt welded tubes conforming to I.S1161-1979 grade St-240 all as specified and directed.
S&F framed work such as grills, gratings, etc., with ends of bars shoulders and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders;framed balusters; walk waysl railings; framework of water tanks and similar work conforming to Fe 290 Gde E165 all as specified and as directed.
S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E-165) all as specified.
M&L for Brickwork with fly ash Old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings ( exclusive of steel, sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe-410-W(Gde-E-250) quality A complete all as specified and directed
S&F 1mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.
S & F small articles of steel such as hold fast, etc of Gde Fe 410-0 or Fe-290 Gde E-165 complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast etc. including formwork complete all as specified.
M & L for Cutting holes in brick walls in cement mortar for inserting hold fast and making good dismantled portion in cement mortar 1:3 with depth of embeded portion of holdfast or lugs measures from the face of jamb into the wall exc half brick but not exc one brick wall complete all as specified and as directed.
S & F 12 mm thick Gypsum board of size 600 x 600 mm in ceiling fixed with screws and finished with two coats oil bound distemper over a coat of self primer all as per manufaturers instructions complete all as specified and directed.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
M&L for Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixiing at site on PVC frame as per specifications and drawings all as specified and directed.
M & L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.
M & L for Complete removal of existing treatment and preparing wall surfaces and applying one coat of alkali resistant primer complete all as specified and as directed.
M&L for applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
M & L for applying two coats of distempering with 1st quality acrylic disptemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer of required shade and colour complete as per manufacturer's specification .
Taking down chowkats or frames exc 1.5 Sqm and not exc. 4 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed.
Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail & bottom rail Paneling plain colour PVC sheet to be fitted in MS frame welded/sealed to the stile & rails with suitable PVC sheet beading as per specification & shown on drawing in SSR Pt II of 2010 incl pvc hinges 100 mm size – 3 Nos for each shutter complete all as specified.
S&F 100mm long extruded aluminum alloy with galvanised mild steel hinge pin anodised Butt hinges all as specified.
S&F for 100mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.
S&F 150 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed.
S&F 100mm size aluminum handles, cast type anodised complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.
S&F in repairs 10 ltr capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, complete all as specified.
S&F plastic water closet seat black closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device complete all as specified.
S&F repairs vitreous china wash basin, angle back, size 600x480mm white, with pedestal, waste coupling excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified.
S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.
S&F in PVC connection 15mm size with PTMT nuts of length 450mm,complete all as specified and directed.
S&F 15mm bore stop valve/Angle cock, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed.
M &L for Cutting existing 25mm bore steel tubing for alterations or additions.
M & L for taking up or down existing steel tubing 20 mm bore and connections complete all as specified and directed.
S & F 20mm bore Unplasticised PVC pipes including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete and making good the area to match with existing surface,complete all as specified and as directed.
S&F for 32mm dia waste pipe for wash hand basin and urinal pots all specified and directed.
S&F in 15mm bore Bib taps, cast copper alloy chromium plated with crutch or butter-fly handle screwed down, screwed for iron pipe or for brass ferrules, complete all as specified and directed.
S&F 15mm bore Pillar taps bore cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified
S&F in 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors all as specified.
S&F 110 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors all as specified.
S&F 75 mm bore PVC (SWR) bends any radius all as specified and as directed.
S&F 110 mm bore PVC (SWR) bends any radius all as specified and as directed.
S&F in repairs Vitreous china bowl urinal flat back, of size 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including discharge pipe of PVC 32mm dia, fixed in repairs, complete all as specified and directed.
S&F in repairs only brass chromium plated Health Faucet with 1mtr Flexible tube & Hook complete all as specified and directed.
S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed.
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick, 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed
Supply and fix Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified
S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminimum section weighing 0.55kg/m including necessay joining cleats, glazing clips, rubber packing, anodised aluminimum snap beading, screws etc. complete all as specified and as directed.
S&F 4mm thick figured glass pin headed type and glazing with oil putty in squares not exc 0.5 sqm in each pane all as specified and as directed .
S & F in rotational moulded polyethylene water storage tank three layered( cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR part I of capacity of 1000 litres conforming to IS specification all as specified.
S&F in 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed.
M&L for preparation of Old plastered wall surface and applying two coats of oil bound distemper over 2mm thickness paris putty complete all as specifed and directed.
S&F for sensor type urinal of size 29.5x32.5x57.5cm or equivalent and approved by GE. Make: Hindware or equivalent as approved by GE.
S&F for 15mm Sensor type pillar taps or equivalent and approved by GE. Make : Hindware or equivalent as approved by GE.
S&F Pre-painted galvalume aluminium zinc coating GI based Designer corrugated steel sheet 0.50mm of an colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with self tapping screws as specified.
Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated FRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia fixed on walls ,ceiling / roof trusses with suitable clamps and accessories etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly, including pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet, 60mm deep, concealed in walls/fixed in wall, duly painted with two coats of anti-corrosive over a coat of red oxide zinc chrome primer and covered with bakelite hylam sheet cover 3mm thick fixed with cadmium plated screws for housing the switches, socket outlets, fan regulators etc., complete all as specified and as directed for the following:-
(a) One light point controlled by one switch.
(b) One switch socket outlet 3 pin 5 Amps on independent board.
S&F Switch piano flush type, single pole,5 Amps, 240 volts complete all as specified.
S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all as specified.
S&F wiring for circuit / submain wiring alongwith warth wire with the size of 2 x 2.5 sqmm and earth wire 1 x 1.5 sqmm FR is PVC insulatede copper condcutor, single core cable in surface / recessed as required complete all as specified and directed.
S&F wiring for circuit / submain wiring alongwith earth wire with the size 0f 2 x 2.5 sq mm and earth wire 1x1.25 sq mm FR is PVC insulatede copper conductor, single core cable in surface / recessed as required complete all as specified and as directed
M&L switch socket combination 2 in 1, 5A flush type all as specified and as directed
Supply and Fixing Modular switch 1 way 6A, 1 module complete all as specified.
Supply and Fixing Modular switch 1 way16A, 1 module complete all as specified.
Supply and fix modular socket 6A-2/3 pin combined 2 module all as specified and directed .
Supply and fix modular socket 6A/16A-2/3 pin combined 2 module all as specified and directed .
S&F modular metal flush box 3 module all as specified.
S&F modular metal flush box 4 module all as specified.
S&F modular white cover plate with frame 3 module all as specified.
S&F modular white cover plate with frame 4 module all as specified.
S&F modular metal flush box 6 module all as specified.
S&F modular metal flush box 16 module all as specified.
S&F modular white cover plate 6 module all as specified.
S&F modular white cover plate 16 module all as specified.
Supply & fix Recess mounting LED backlit panel ceiling light 2X2 environmental friendly new generation aesthetically designed ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, LED backlit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications 36 Watt LED (2'X2') complete with electronic driver, suitable for operation on AC, single phase , 220/230V , 50 Hz , including provision of suitable twin core copper conductor PVC insulated , 1100 Volts grade cables not more than 5 m long and connecting up ceiling rose and fittings and testing , including taking down old fittings all as specified and directed.
Supply and fix recess mounting LED ceiling spot light 24W, complete with electronic driver, suitable for operation on AC, single phase, 220V/230V,50Hz, including provision of three core flexible copper conductor PVC insulated 1100V grade cable connecting up ceiling rose to fitting terminal end and testing complete all as specified and directed.
Supply and fix mirror 12W LED fitting surface mounted and high performance batten complete with electronic driver and LED tube suitable for AC single phase,230V, 50Hz, including provision of three core flexible copper conductor PVC insulated 1100V grade cable connecting up ceiling rose to fitting terminal end and testing complete all as specified and directed.
S&F Surface and wall mounted LED tube light fitting, 36 W, batten type, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 300mm complete all as specified and directed.
Supply and Fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified.
Supply and Fixing of circuit / submain wiring alongwith earth wire with the size of 2 x 4.0 sq mm and earth wire 1x4.0 sq mm FR in PVC insulated copper conductor, single core cable in surface / recessed as required complete all as specified and as directed
JANANIKARTHIK ENTERPRISES
kvs constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .