REPAIR MAINTENANCE OF RO PLANT AT ODF, 509 ABW, 801 TA BN AND VARIOUS PUMP HOUSE LOCATED UNDER AGE E/M (W) OF GE (W) AGRA

Amount

Repair/maintenance and servicing of RO plant, 1000 Ltrs capacity in undermentioned locations by replacement of unserviceable parts to make it serviceable including cleaning of membrane active, carbon filters sand, silex media property if required with the help of changing chemical (recommeded by manufacturers) complete all as directed by Engineer-in-Charge.Note : (i) No extra payment will be made for chemical and other cleaning material. (ii) Labour for replacement of unserviceable part shall be deemed included in the job and cost of part shall be measured and paid separately under respective items. Location of Plant: (i) ODF (ii) 509 ABW (iii) Red fort. Complete all as specified and directed by Engr-in-Charge.

Cartridge 4" x 20" large filter 5 micron thread type. Complete all as specified and directed by Engr-in-Charge.

Supply only 2" x 20" Cartridge large filter 1 micron paper/spun type. Complete all as specified and directed by Engr-in-Charge.

Supply only Activated carbon for Reverse Osmosis (RO) plant capacity 1000 Ltrs Complete all as specified and directed by Engr-in-Charge.

Supply only sand media for RO plant cap 1000 Ltrs complete all as specified and direcetd Complete all as specified and directed by Engr-in-Charge..

Supply only Silex Media for Reverse Osmosis (RO) plant capacity 1000 Ltrs cComplete all as specified and directed by Engr-in-Charge.

Supply only Antiscalant chemcal/Solution for Reverse Osmosis (RO) plant capacity 1000 Ltrs Complete all as specified and directed by Engr-in-Charge.

Supply only membrane, suitable for RO Plant of capacity 1000 LPH, low energy/brikish type BW 30-4040. Complete all as specified and directed by Engr-in-Charge.

M&L for dismantling high pressure motor of capacity up to 2HP & cutting the unserviceable winding wire, cleaning the stator and totor and rewinding the same with supper enameled copper winding wire of existing gauge and turn including varnishing, PVC sleeve, cotton tape insulation paper, Sealing and all other material required for rewinding including lathe work of shaft and replacement of defective bearings two Nos (6203/6205) and refixing back in original position Complete all as specified and directed by Engr-in-Charge.

M&L for dismantling high pressure pump up to 3HP, multistage, centrifugal/monoblock electric driven, reassembling and refixing in position after repair by replacemnet of impeller, gasket, gun metal bush, water seal etc including sealing complete to bring it in serviceable condition complete all as specified and directed.

S&F in replacement of flushing pump of of capacity 1.5 HP stainless steel body complete all as specified and directed.

S&F replacement of pressure gauge 2'' dia of cap 0-20 kg/sqcm or 300 psi including necessary connection complete all as specified and directed by Engr-in-Charge.

S&F in repairs gun metal half turn valve 25mm bore for iron pipe Complete all as specified and directed by Engr-in-Charge.

S&F in repairs gun metal half turn valve 20mm bore for iron pipe Complete all as specified and directed by Engr-in-Charge.

S&F in repair single phase preventor type VSP 2 Complete all as specified and directed by Engr-in-Charge.

S&F in repair starting panel with single phase starter 230 Volts, over load relay, Amp meter , Volt meter, Contractor including 32 Amp SPN MCB indicating lamp push button etc suitable for 2 to 3 HP submersible pump Complete all as specified and directed by Engr-in-Charge.

S&F in replacement of membrane housing made out of Stainless Steel for 1000 LPH RO plant suitable to hold of 2 memberane in series low energy type of size BW 30-4040 complete with end shield, nuts, bolts Complete all as specified and directed by Engr-in-Charge.

S&F in replacement of chemical dosing pomp suitable for 1000 LPH RO plant Complete all as specified and directed by Engr-in-Charge.

S&F in repairs TDS meter to monitor on line reading of final treated water with digital display panel mounted Complete all as specified and directed by Engr-in-Charge.

S&F in repair pressure gauge, 100mm dia of scale 0 to 7Kg/cm2 with FI clamp of size 25 x 3 mm and 15mm socket Complete all as specified and directed by Engr-in-Charge.

S&F in repair contactor including fixing arrangment suitable for 2/3 HP submersible pump Complete all as specified and directed by Engr-in-Charge.

S&F in repair capacitor including fixing arrangment suitable for 2/3 HP submersible pump Complete all as specified and directed by Engr-in-Charge.

S&F in repairs submersible cable PVC insulated copper conductor 2.5 Sqmm 3 Core 1100 V grade Complete all as specified and directed by Engr-in-Charge.

S&F in repairs submersible cable PVC insulated copper conductor 4 Sqmm 3 Core 1100 V grade Complete all as specified and directed by Engr-in-Charge.

S&F in repairs submersible cable PVC insulated copper conductor 6 Sqmm 3 Core 1100 V grade Complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in soft/loose soil, n. exc. 1.5 M wide and n.exc 1.5 M in depth, to required level and gradient for laying of pipe etc and getting out Complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick in soft/loose soil Complete all as specified and directed by Engr-in-Charge.

Removing excavated materials (soft/loose soil) to a distance n.exc. 50 M and depositing where directed at a level n.exc. 1.5 M above the starting point Complete all as specified and directed by Engr-in-Charge.

Dismantling and taking out old unsv CI/DI pipe line of 150 mm dia from excavated trenches Complete all as specified and directed by Engr-in-Charge.

Supply, laying and jointing for 150 mm bore centrifugally cast (spun) ductile iron pressure pipes for water mains with socket & spigot ends conforming to IS 8329/2000 any length for classification of K7 suitable for rubber gasket joint (push on type) with cement mortar lining inside the pipe with outside zinc coating complete all including existing connection with required size of Tee or MS clamp with rubber bush aComplete all as specified and directed by Engr-in-Charge.

Cutting existing Cast Iron/Ductile iron pipes in position (comprising of two cuts) for insertion of new iron fittings (tees, branches etc) complete of the size 150mm bore of pipe Complete all as specified and directed by Engr-in-Charge..

M&L for push on tyton (rubber gasket) joints for 150mm bore DI pipe Complete all as specified and directed by Engr-in-Charge.

S&F in repair MCCB, 3 pole, 415 volts, 50 Hz, 63-100 Amps, 16 KA fixed type Complete all as specified and directed by Engr-in-Charge.

S&F in repairs MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA Complete all as specified and directed by Engr-in-Charge.

S&F in repairs MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA Complete all as specified and directed by Engr-in-Charge.

S&F in repairs MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA Complete all as specified and directed by Engr-in-Charge.

S&F in repair cast iron non return valve 80mm bore ISI marked both ends flanged including rubber gasket, MS bolts, nuts, washers and testing Complete all as specified and directed by Engr-in-Charge.

S & F in repairs cast iron sluice valve for the 150 mm bore both ends flanged, PN-1.0, with iron wheel (ISI marked) steel spindle,including nuts, bolts, washers and 3 mm thick rubber insertion sheet Complete all as specified and directed by Engr-in-Charge.

S&F in repair sluice valve, Class PN-1, 100 mm dia both end flanged with high tensile SS spindle with lock nut (gutka), ISI marked complete with jointing materials such as rubber packing, nuts, bolts & washers Complete all as specified and directed by Engr-in-Charge.

S&F in repair sluice valve, Class PN-1, 80 mm dia both end flanged with high tensile SS spindle with lock nut (gutka), ISI marked complete with jointing materials such as rubber packing, nuts, bolts & washers Complete all as specified and directed by Engr-in-Charge.

Repairs to leakage of 300 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making new run lead joints by using spun yarn and earth works Complete all as specified and directed by Engr-in-Charge.

Repairs to leakage of 250 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making new run lead joints by using spun yarn and earth works Complete all as specified and directed by Engr-in-Charge.

Repairs to leakage of 200 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making new run lead joints by using spun yarn and earth works Complete all as specified and directed by Engr-in-Charge.

Repairs to leakage of 150 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making new run lead joints by using spun yarn and earth works Complete all as specified and directed by Engr-in-Charge.

Repairs to leakage of 100 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making new run lead joints by using spun yarn and earth works Complete all as specified and directed by Engr-in-Charge.

Repairs to leakage of 80 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making new run lead joints by using spun yarn and earth works Complete all as specified and directed by Engr-in-Charge.

S&F in repair 100 mm bore foot valve, cast iron body, manufacturing standard IS 4038, pressure rating PN-2 with flanged and drilled ends cast iron body, Hinged leather seat, ISI marked, including all joints, bolts and nuts, washers, including taking up / down old unserviceable valve from any position and any addition / alteration for fixing required Complete all as specified and directed by Engr-in-Charge.

S & F in repair stainless steel spindle of sluice valve 200mm bore including check nuts Complete all as specified and directed by Engr-in-Charge.

S & F in repair stainless steel spindle of sluice valve 150mm bore including check nuts Complete all as specified and directed by Engr-in-Charge.

S & F in repair stainless steel spindle of sluice valve 100mm bore including check nuts Complete all as specified and directed by Engr-in-Charge.

S & F in repair stainless steel spindle of sluice valve 80mm bore including check nuts Complete all as specified and directed by Engr-in-Charge.ected.

S&F in repair change over switch front operated, open excution type, 4 pole, 415 Volts, 100 Amps including making all incoming/outgoing cable connections using new aluminium lugs Complete all as specified and directed by Engr-in-Charge.

S&F in repair change over switch front operated, open excution type, 4 pole, 415 Volts, 250 Amps including making all incoming/outgoing cable connections using new aluminium lugs Complete all as specified and directed by Engr-in-Charge.

S&F in repair change over switch front operated, open excution type, 4 pole, 415 Volts, 400 Amps including making all incoming/outgoing cable connections using new aluminium lugs Complete all as specified and directed by Engr-in-Charge.

Supply and fixing 100 watt , LED security Flood light made out of pressure die cast aluminium housing with toughned glass , IP66 protection and impact resistance IK07 ,mounted on top of the pole with cap type bracket having lenght not less than 0.31 meter fixed with suitable fasteners having extended arm length not less than 1.5 meter and dia not more than 43 mm and angle between pole and extended arm should be 100 to 105 degrees including fabrication work for fixing Building security light . including PVC insulated three core 23/0.0076 copper cable and including suitable size of pvc flexible conduit from celling rose to building security light fittings complete all as specified and directed.

S&F in repair of wiring on wall/surface laying in trenches PVC insulated 1.5 Sqmm, 3 core copper conductor 1100 Volts grade cable drawn through PVC conduit pipe of 20mm dia Complete all as specified and directed by Engr-in-Charge.

Taking up or down for 100mm bore old steel tubing and connections Complete all as specified and directed by Engr-in-Charge.

All as per item No-58 above but 80mm bore.

All as per item No-58 above but 50mm bore.

Supply, laying and jointing for the 100mm bore in trenches/on floor/wall, galvanized steel tubing medium grade including ISI marked GI fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of Tee or MS clamp with rubber bush c Complete all as specified and directed by Engr-in-Charge.

All as per item No-61 above but 80mm bore.

All as per item No-61 above but 50mm bore.

M&L in repairs rotational modulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 Ltr size all as specidied and directed by Engr-in-Charge.

S&F in repairs circular cover for water storage tank, any capacity made out of 1 mm thick GI sheet PVC water storage tank fix with suitable screws (indoor to protact monkey menance) design and size as per sample kept in GE office or as approved by Engr-in-Charge complete all as specified.

M/S ADITYA ENTERPRISES (BID ID -3074844)

M/S SHARADA ASOCIATE (BID ID -3074490)