SPECIAL REPAIR TO OIL ANDLUBS SHED (P-9/37), P-5, P-40 AND P-2 (OR TOILET) UNDER ZONE-II AREA AT JAIPUR MIL STN

Amount

Taking down existing treatment complete including PCC and properly clean the surface to remove loose particles with wire brushes and removing the debris out side of MoD Land complete all as specified and directed by Engr-In-Charge

M&L for screed plaster 15 mm thick in CM 1:4 on roof surface complete and finished the surface even and smooth without using extra cement etc. complete all as specified and directed

M&L for 25 mm thick cement concrete in CM 1:2:4 type B-0 (12.5 mm graded stone aggregates) average as in RCC roof surface to horizantal surface etc. incl water proofing compound @2% by weight of cement complete all as specified and directed. (note: WPC will be measured and paid separately)

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS: 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions and finally applying one coat of bitumen @ 1.2 kg/sqm on APP membrane including two coats of aluminium paint complete all as specified and directed by Engr-in-Charge. Note: The work shall be executed by the authorized applicators of the company and ponding test should be carried out after execution of work.

Supply only integral water proofing compound

S&F Aluminium channel of size 30x75mm fixing to wall/concrete surfaces with all fixing arrangements complete all as specified and directed

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid,bedded and pointed in cement mortar

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing laid over & including 15mm thick screed bed in CM 1:4 complete all as specified and as directed

M&L for machine cut kota stone slab flooring 40-50mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing laid over & including 15mm thick screed bed in CM 1:4 complete all as specified and as directed

Dismantling plain or corrugated asbestos sheeting any gauge or thickness as in roof covering .

S&F prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering incudingl ridge fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with self tapping screws as specified.

Material and labour for preparation of old painted steel surfaces of exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed

M&L for preparation of old wooden surfaces of any description, over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed

S&F complete removal of existing treatment of old plastered surfaces of wall and applying two coats of distemper oil emulsion,white or tinted complete all as specified and as directed by Engineer-in-Charge.

S&F Complete removal of existing treatment of walls and applying two coat of cement base paint (Ist quality) in plain pattern on walls complete all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L rendering 15 mm thick on stone masonry other than fair faces of brick surfaces in CM(1:6) finished even and smooth with out using extra cement

M&L for preparation of new surfaces of wall and applying two coat of oil bound distempering over one coat of primer including chalk whiting complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth (without using extra cement)

Preparing new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint complete.

M&L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface.

M&L Cement concrete 1:4:8 Type D2 (using 40mm graded aggregate) as in foundation, filling and mass concrete.

M&L 75mm thick cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection & paving, finished even & smooth without using extra cement.

Dismantling of wrought iron or mild steel work of any description not other wise provided for.

M&L for Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E--250or Fe-310-0) (Including preparation of surface and one shop coat of zinc chromate primer paint) at contractors workshop before fabrication.

M&L for mild steel flat iron for wind tie etc including necessary drilling holes and fixing with necessary self drilling and self tapping screws/bolts and nuts, neoprene and limpet washers with 150mm end laps wherever required (Fe 290, gde E-165) complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding( but not backing ), removing serviceable tiles to store and rubbish off the primises .

M&L for Non - Skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles fisrt quality of size 300x450x 7 to 8 mm th , in skirting,dado etc set and jointed in neat cement slurry and pointed in coloured cement to match shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Supply & Fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests including trap but (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan, `pedesatl pattern (EWC) white in colour with and including plastic seat cover white closed pattern with flat bottom and cover and MS chromium palted hinging device including connecton to uotgoing pipe complete all as specified and directed by Engr - In - charge . , size 580 x440 mm white, with integral foot rests (excluding flushing cistern ), fixed in repair all as specified.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

Supply & fixed PVC connection 15mm x 450mm size with PTMT nuts.

S&F in repairs Wash hand basin, flat back 550x400mm vitreous china (white) including chromium plated waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified.

S&F Tubular towel rail, brass chromium plated, 20mm dia, D type, 60Cm long between flanges complete all as specified and as directed.

S& F Stainless steel peg stay six complete all as specified and as directed

S&F chromium plated Soap dish, approximated of size 160mm x 160 x 90 mm complete all as specified and directed.

S&F CP fancy type health faucet 15mm bore (ISI marked) including extension pipe of 1 mtr long complete all as specified and directed.

Supply & fixed in repairs 15mm bore CP pillar tap with capstan head screwed down high pressure with or without 'Hot' or ' Cold' with long screwed shank and fly nuts screwed for iron pipe fancy type complete all as specified and directed.

Supply & fixed as in repair of 15mm bore CP stop valves chromium plated with long shankand cup fancy type(concealed type) screwed down with iron pipe or for union fixed complete all as specified and directed.

Supply & fixed in repair 15mm Brass bib taps cast copper alloy with crutch or butterfly handle screwed down to iron pipe or for brass ferrule fixed complete all as specified

Supply & fixed in repair chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union og size 15mm complete all as specified and directed.

S&F in repair angle valve 15mm dia bore chromium plated cast copper alloy with long shank and cup (concealed type)

S&F PVC (SWR) pipes 75mm dia single socketed in length with rubber ring joints liad in trenches or in floors complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) Gully trap any radius complete all as specified and as directed.

S&F 15mm GI tubing medium grade with all fitting & fixed to walls & ceiling or laid in floor complete including taking down of size 15mm bore

S&F 20mm GI tubing medium grade with all fitting & fixed to walls & ceiling or laid in floor complete including taking down of size 20mm bore

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc 1.50 sqm and n.exc 4.00 sqm each complete all as specified and directed.

Taking down shutter of any description area exc 1.00 sqm and n exc 2.00 sqm each complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing (fe 410-w (E-250 quality-A) complete all as specified and directed.

M&L for 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003. The shutter shall be fitted to chowkhats with all fittings incls as directed by Engineer-in-Charge.

S & F plain, galvanised, mild steel sheeting 1.25mm th in covering to door shutters: covering to door chowkats ( frames) chullah hoods; water tank; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc with plain 40 mm lap joints or welded / riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc as , .63mm thickess of sheet required.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete dovetailed or welded

M&L for Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified .

S& F 3mm thick sheet glass ordinary quality and glazing with silicon gel or wooden beads in squares n.exc 0.5 sqm in each pane.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive incls of two handles and tower bolt etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified.

S&F 100mm size of stainless steel butt hinges, medium weight, cold rolled .

S&F 100mm size extruded aluminium alloy handles, fabricated type.

S&F 150mm size aluminium, anodised barrel tower bolt of extruded section.

Disconnecting old unserviceable soak well and M&L for construction of soak well 2.40 metre internal dia and over all depth of3.00 including necessary excavation and earth work in any type of soil PCC 1:4:8 type D-2 using 40mm graded stone aggregate and RCC 1:2:4 type B-1 complete all as specified and shown on drg No CEJZ/2004/TD/S-35 sheet 1/1 dated 11 May 2004.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation etc, or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting Out in soft loose soil.

Demolition of brick work / stone boulder / PCC block masonary, built in cement mortar or cement lime mortar including all quoins, arches pillars, etc but excluding ashlar facing, dressed stone works, precast concrete articles and precast concrete block wallings complete all as specified and as directed.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:4

M&L for providing cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and as directed.

supplying and laying DWC pipes (Double wall corrugated) of class SN-4, IS-16098 (Part-II) of size internal dia of 200mm, laid in trenches and jointed complete with coupler, bends, tee, reducer etc complete all as specified & directed. Make: Ultra plus DWC PE pipe of supreme/corfit of prince/D-Rex DWC of Astral.

M&L returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil.

M&L removing excavated material exc 250 m but not exc 500 m and deposited where directed

M&L for providing, precast cement concrete in landings, cover slab(for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces in CM 1:4 complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed.

M&L cutting into existing man holes for connecting new drains of 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as reqd.

M&L for rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces and finishing the surface rough to receive tiles complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C- 2, 1:3:6 (40mm graded aggregate as in Sub base complete all as directed.

M&L Machine pressed precast concrete interlocking paver block,coloured rubber moulded any shape and size 60mm thickness, M-35 Grade with grey cement and pigment ISI marked laid over and including 25mm thick sand cusion including watering and consolidation complete all as specified and as directed.

Schedule of Credit

JAGDAMBA CONSTRUCTION COMPANY

M/S JALANDRA CONSTRUCTIONS

MSR INFRATECH

NAGHAR ENTERPRISES

Akhil Enterprises

SAI MAX INFRAPROJECTS

Sh. Manoj Nagar