C/o waterr harvesting structure in bholar nalla mandal beat saraswati nagar range rohru forest division

Earth work in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious mateiral and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material in ordinary rochs up to 3 mtr depth.

Providing and laying Cement concrete 1:6:12 ( 1 cement: 6 sand: 12 graded stone) aggregate 40 mm nominal size) and curing complete excludign cost of centrign and shuttering in foundation and plinth

Providing and laying cement concrete 1:1.5:3 (1 cement : 1.5 sand 3 graded stone aggregate 20 nmm nominal size and curing complete excluding cost of form work. (i) Foundation and plinth)

Walls (Any thickness but not less than 1 mtr thickness) attached plasters, buttress, plinth and string courses etc. from top of foundation level upto floor two level.

Providing mild steel/tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level.

Providing form work with steel plates 3.15 mm thick welded wth angle iron in frame 30X30X5 mm. So as to give a fair finish including centring, shutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring belwo supporting floor to ceiling not exceeding 4 mtrs. adn removal of the same for insitu-reinforced concrete & plain concrete work in flat surfaces such as soffits of supspended floors, roofs, landings and the like.

15 mm cement plaster in single coat on the rough side of brick/concrete/stone wall sfor interior plastering upto floor two level includign arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth.

Stone soling properly hadn packed filling interstices with Kharanja sonte and consolidating with power road roller to the requested gradient and comber including spreading watering and roling of binding materials moorum or earth etc. complete as per HP. PWD specification. 100 mm spread thickness (Finished work including materias and labour)

Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm X 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 k.g. each as per drawing and technical specifications Clause 1301

Steel work welded in built up sections, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of lead paint in beams joints channels angles tees flats with connectioin plates or angle cleats as in main and cross beams, hip and jack rafters, purlins and connected to common rafters and the like as per specification.

Supplying and fixing woven plains G.I. wire fencing of mesh 50 mm to 150 mm to any tupe of standard rails, strainging bolts etc. including provision of binding wire, staples etc.

ANKUSH CHAUDHARY

Kapil Rawat

SURINDER THAKUR

ZAFIR HUSSAIND