REPAIR TO DRAINS AND FENCING AND HARDSTANDING AND RETAINING WALL AND SECURITY WALL AND GATE ETC AT SHILLONG CANTT UNDER GE SHILLONG

Amount

Dismantling post or strut (Wood, steel, RCC) any section incl taking out embeded portion by demolition of cement concrete in fdn and making good the disturbed portion of ground, complete all as specified.

Excavation in post holes (or similar holes) each in any type of soil n. exc. 0.5 cum, getting out, returning filling in an ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm, watering and removing surplus soil to a distance not exc. 50 M and making good complete all as specified.

Dismantling barbed wire fencing of any description, size, spacing, all as directed.

Dismantling fencing wire mesh any type, all as directed.

S&F Galvanised 2 strand steel barbed wire, 2.24 mm, barbed with 2.00 mm dia barbs at spacing 75 mm and straining and fixing to any type of strandard rails straining bolts, incl securing or tying at crossing with provn of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.

Restraining and resecuring incl making good staples etc. of old barbed wires complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S&F round bars/TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for fencing, columns, beams, etc. hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

Ditto above (Item No-9) but 5mm dia and over upto and including 10mm dia in stirrups ,spacers and binders.

S & F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L plain cement concrete Type C2 1:3: 6 (40mm graded aggregates) in foundations, filling in post of fencing, pcc sub-base and mass concrete complete all as specified and directed.

Demolition of PCC block masonry, brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level) complete all as specified and directed.

M&L welding in repairs to metal surfaces n. exc 2.5cm in length and n exc 6mm thickness of metal

M&L welding in repairs exc 2.5cm and n exc 5cm in length and n exc 6mm thickness of metal

S&F MS work for screws bolts (Machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with wasahers and square nut, exc. 5 cm and n. exc. 10 cm long diameter of shank 11 to 15 mm complete all as specified and directed.

Excavation in trenches n.exceeding 1.50m wide and not exceeding 1.5 in depth for foundation etc and getting out as in soft/loose soil complete all as specified and as directed.

Excavtion over areas not exc 1.5 m deep and getting out soft/loose soil

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc.25 cm thick in soft/loose soil ass as specified and directed.

Removing of surplus exacavated material (soil) to distance n.exc. 50m and disposing where directed at a level n.exc. 1.5 m above the starting point in soft/loose soil complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, miltred/stopped ends etc complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded aggregates as in plinth protection including finishing even and smooth without using extra cement complete all as specified and as directed including demolition of old PCC as in plinth protection complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Formwork to sides of concrete foundations,drains, footings, bases of columns, raft and fafts beams, sides and soffits (if any) of fdns and plinth beams, and similar works and fair finished surface.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, drain covers and in shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) incl fair finished surface complete all as specified and directed.

M&L for pre-cast PCC solid block walling with cement concrete type C1 (1:3:6, using 20 mm graded crushed stone aggregrates) exc.10cm in width and setting in cement mortar 1:6, complete including demolition at old precast cement concrete block walling complete all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks in CM 1:4, straight or curved on plan to any radius in half brick thick walls complete all as specified and as directed.

M&L walling of Random rubble , uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:4 complete all as specified and as directed.

M&L raised pointing to random rubble stone masonary uncoursed or brought upto course in cement mortar 1:3 complete all as specified and as directed.

M&L RCC 1:1.5:3 nominal mix (20mm graded aggregates ) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L RCC 1:1.5:3 nominal mix (20mm graded aggregates ) as in beam, lintel band over 1.50m span complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation , filling and mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L rendering 15mm thick, CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L rendering 10mm thick, CM 1:4 on stone masonry surfaces or surface otherthan fair face of brick-work or on one side of lathing complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls including cornices, pilasters etc and applying two coat of cement paint, white or tinted complete all as specified and as directed.

M&L for prepration of old decorated surface of wall and applying two coats of cement paint, white or tinted complete all as specified and as directed.

M&L for prepairing old wall surfaces by washing rubbing down and stopping of distempered or any painted surfaces and priming with alkali resistant primer paint and applying two coats of cement base paint.

M&L Preparation of old steel and iron surfaces of any description, over any width or girth,not otherwise described applying two coats of aluminium paint over one coat of red oxide primer, complete all as specified and directed.

M&L Preparation of new steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

S&F mild steel framed work as in doors or gates, guard rails of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any guage thickness including nainital or similar pattern roof covering all as specified and directed.

Dismantling of asbestos cement (corrugated,semicorrugated etc) sheets in roof covering complete all as specified and as directed.

Dismantling wrought Iron or mild steel work of any description not other wise described complete all as specified and directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and direcetd.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

S & Fixing as in repair 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer 15 mm thick in CM (1:4). complete all as specified and directed.

M&L for non skid ceremic coloured tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for heavy duty vitrified ceramic tiles (Paving dark shade, 10 mm thick(square /rectangular), polished, area of each tile n exc 0.36 sqm in floor etc , laid over and including 15 mm thick screed bed 1:6 ,set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade use grey cement and pigment complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade use grey cement and pigment complete all as specified and as directed.

M&L sand filling under floors/paver blocks or complete all as specified and as directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints inc bends ,laid in trenches or in floors complete all as specified and as directed.

S&F 75mm bore PVC (SWR) bends any radius

S&F 110mm bore PVC (SWR) bends any radius

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints inc bends ,laid in trenches or in floors complete all as specified and as directed.

SUNITA DEVI (BID ID -3372711)