REPAIRING OF HT/LT NETWORK AT I/C KHONMUH

Amount

Note: Contractor should Quote Rates with all taxes.

SITC of HT steel tubular poles swaged type pole fitted with base plate. Pole designation 410- SP 33 9 Mtr. Height cap on top with base coat painting of red oxide and two coats of silver white paint. The execution of pole pit up to 5Ft. deep & refilling the same after erection of pole. Cement bottoming of steel tubular poles, 2’x2’x6’ in the ratio of 1:3:6 mix. (1cement: 3 coarse sand: 6 graded aggregate stone 40mm nominal size). The foundation block shall be laid 5’ below ground level and 1’ above ground level with surface with 1mm thick cement plaster in 1:4 mix. (1 cement : 4 coarse sand) NOTE: The necessary formalities with PDD including shutdown shall have to be adopted by the contracting agency as per the norms and guidelines of JKPDD.

P/F of 11 Kv polymer type Pin insulators with pins, nuts washers etc. ( complete Job) ( 10 KN)

P/F of channel iron 100mm x 50mm x 6mm (16 kg) 5 ft long cross arm including, bolts, nuts and washer and necessary clamps for insulator pins having base coat of red oxide and two coats of silver white paint as required.

Providing of 11Kva HT Gloves set

Providing of Acrylic Link Rod

Providing and fixing MS flat iron braces 1 Mtr. long 50x 6mm having base coat of red oxide and two coast of silver white paint with holes drilled as required

Max Marketing (BID ID -2356387)

M/S T N S ASSOCIATES (BID ID -2356451)

M/S TULIP ENGINEERS (BID ID -2356442)