SPECIAL REPAIR TO ROAD AND ROAD FURNITURE FROM CMH-01 TO CMH 68 AT MIL STN MOUNT ABU UNDER AGE (I) UDAIPUR

Amount

Scarifying or picking graveled, macadam or bituminous macadam surface in area not exceeding 400sqm, exceeding 50mm deep and not exceeding 100mm deep and removing where directed by Engr-In-Charge complete all as specified and directed

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with paving bitumen 80/100 (VG-10) grade at the rate of 5.0Kg per 10Sqm on black top surfaces complete all as specified and directed.

M&L for laying premixed bituminous macadam (using binder not less than 4% by weight of total mix) rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using VG-30 paving bitumen, complete all as specified and as directed. Note: No extra payment will be made if binder is more than 4%.

M&L for applying evenly a tack coat with bituminous primer at 10Kgs/10sqm and laying bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen and laying with mechanical paver, rolled and compacted to required camber or gradient using 8 to 12 ton power roller including preparing old bitumen rough surface by brushing with wire brushes for removing cracked mud etc., sweeping with booms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc all as directed and specified.

Repair to potholes any depth exceeding 30mm, not exceeding 5sqm each including sweeping free from dust & mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat at 5.0kg per 10sqm. putting in premixed bituminous macadam, well rammed & sealed with binder 9.8kg per 10sqm, blinded with 0.09cum of stone chippings, 6.3mm size & again will rammed (including supply or premixed macadam, binder & chippings) complete all as specified and directed.

M&L for painting lines, dashes, arrows, letters etc on roads, pavements and the like exceeding 10cm wide with retro reflective Thermoplastic road marking Paint (white or golden yellow colour) by hot mixing method as per IS specifications, heating with gas, to achieve minimum uniform thickness 1.5mm using painting materials @ 6.50kg/sqm and glass beads @250gm/sqm complete all as specified and directed.

S&F in repair installation of cat eye with high reflective prismatic reflector fixed using special adhesive complete all as specified and directed.

shree nathji trading corporation

M/s B. S. Solanki Builders

Venkateshwara Constructions

M/S Balkishan Panwar Construction

shri balaji trading corporation

J.J.ENGINEERING

RK CONSTRUCTION