Construction Bus shelter at Keelkulam Village in T.Valliyoor Village Panchayat of Valliyoor Panchayat Union

Amount

Earthwork excavation for foundation in all solls and sub soils with an initial lead of 10m and initial lift of 2m including refilling the sides to the required depth as may foe irected except hard rock requiring blasting inclusive of shorting, strutting a

Filling in foundation and basement with excavated earth in layers of 15cm thick wet! watered, rammed and consolidated complying with relevant standard specification including cost of filling sand

Filling in foundation and basement with river sand in layers of 15cm thick wet! watered, rammed and consolidated complying with relevant standard specification including cost of filling sand

Cement concrete 1:4:8 (One of cement four of sand eight of hard broken stone Jelly) using 40mm size hard broken stone Jelly for foundation inclusive of shoring strutting and bailing out water, ramming, curing etc., complete in all respects.

Brick work in CM 1:5 (One of cement and five of sand) using country bricks of size 8 ¾ ´ 4 ¼" ´ 2" including labour charges for fixing the doors. Windows and ventilator frames in Position., fixing of hold fasts, scaffoldings, curing etc., complete in all respects Below basement

Brick work in CM 1:5 (One of cement and five of sand) using country bricks of size 8 ¾ ´ 4 ¼" ´ 2" including labour charges for fixing the doors. Windows and ventilator frames in Position., fixing of hold fasts, scaffoldings, curing etc., complete in all respects Above Basement

Reinforced Cement concrete 1:11/2:3 (one of cement one and half of sand and three of hard brokens stone jelly) using 20mm size hard broken granite stone jelly for all reinforced cement concrete works excluding cost and fabrication of reinforcement grills Below basement

Reinforced Cement concrete 1:11/2:3 (one of cement one and half of sand and three of hard brokens stone jelly) using 20mm size hard broken granite stone jelly for all reinforced cement concrete works excluding cost and fabrication of reinforcement grills Above Basement

Supplying, fabricating and placing in position of the following dia of Mild steel grills/Ribbed for steels for reinforcement for all reinforced cement concrete works including cost of steel, binding wires, tying, bending fabricating the reinforcement grill etc complete

Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.

Plastering in CM 1:5 (one of cement and five of sand) 12mm thick for finished with neat cement including band cornice, scaffolding curing etc., complete in all respects, as directed by the departmental officers

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete.

Emulsion painting two coats using emulsion over priming coat including cost and conveyance of all materials to site and all labour charges etc complete

N Sivapuermal (BID ID -1536845)