SPECIAL REPAIRS TO ROOF AND FLOOR OF MT VEHICLE PARKING SHED , SPECIAL REPAIRS TO ROOF TREATMENT AT CERTAIN BUILDINGS IN TECH AREA AND SPECIAL REPAIR TO TRAVERSE WALL AT AFS JAISALMER UNDER GE (AF) JAISALMER

Demolition of cement concrete (reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and any portion ordered to be dismatled of any thickness complete all as specified and directed.

M&L for Reinforced cement concrete M-25 design mix type B-1 (1:2:4) using 20 mm aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; surface finished fair and smooth complete all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide surface finished fair and smooth complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. surface finished fair and smooth complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel bars of 5 mm dia over and upto incl 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stiruups spacer and binders complete all as specified and directed.

M & L PCC (1:2:4) type B-0 using 12.5mm graded stone agg as in Roof padding,levelling course or similar work complete all as specified and directed.

M&L for Screed bed or bedding layer or mortar 15mm thick in cement mortar 1:3 with WPC finishing even and smooth with out using extra cement to receive roof treatment, mixed with water proofing compound as per manufacture instruction by weight of cement over cleaned roof surface as in gradin to RCC roof surface complete all as specified and directed. Note- water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed.