Construction of Market Shed with storage/cold storage facilities at Lukhambi near District Head Qtd. Noney under Hill Area Development Programme.

Amount

LAND DEVELOPMENT

Earth work in excavation in hill cutting including disposal of excavated earth lead 50m and lift 1.5 m disposed earth to be leveled and neatly dressed. (a) Hard Shale

MAIN BUILDING

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete with a lead of 50m

CEMENT COCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1 cem :4 Coarse sand: 8 graded stone aggrt. 40mm nominal size).

REINFORCED CEMENT CONCRETE WORKS

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size

Reinforcement for R.C.C.work including bending,binding and placing in position complete

(b) Thermo-Mechanically Treated bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

C) Sides and soffits of beam,beam haunching,cantilever,girders,bressumers and lintel not exceeding 1m depth

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(d)Flat surface such as suspended floor,roofs,landing & the like ( i) floor etc upto 200mm in thickness

BRICK WORKS

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement: 4 coarse sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth.

FLOORING WORKS

P/L vitrified floor tiles in different sizes (thickness to be specified by the manufacturer )with water absorption less than 0.08% and conforming to IS 15622,of approved make ,in all colours & shades laid on 20mm thick cement mortar 1:4 (1 cem : 4 c/sand),i/c grouting the joints with white cement & matching pigments etc,complete (i)size of tile-600x600mm branded

FINISHING

Applying one coat of cement primer of approved quality on wall surface.

Finishing walls with water - proofing cement paint of approved quality on new work ( two or more coats) to give shade.

Painting (two or more coats) with plastic emulsion paint of approved quality on new work excwpt walls to give an even shade.

PLINTH PROTECTION

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

WATER SUPPLY & SANITARY INSTALLATION (6WC I/C SEPTIC TANK &GROUND SUMP

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete with a lead of 50m

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1 cem :4 Coarse sand: 8 graded stone aggrt. 40mm nominal size).

(b)1:3:6 (1 cement:3Coarse sand:6 graded stone aggregate 40mm nominal size)

( c ) 1:2:4 (1cement:2 coarse sand:4 graded stone aggregate 20mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size

Reinforcement for R.C.C.work including bending,binding and placing in position complete (a) M.S bar

(b) Thermo-Mechanically Treated bars.

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

C) Sides and soffits of beam,beam haunching,cantilever,girders,bressumers and lintel not exceeding 1m depth

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(d)Flat surface such as suspended floor,roofs,landing & the like ( i) floor etc upto 200mm in thickness

(e) Vertical surface such as walls (any thickness), partition and the like including attached pilasters,buttrese, plinth and the string courses and the like.

(f) Edges of slab and breaks in floors and walls (i) Under 20cm wide

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement: 4 coarse sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure above plinth.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position a) Local best quality Uningthou

Providing wood work in trusses, purlins, rafter, posts, post plate wall plate & the like wrought framed hoisted & fixed in position (a) uchan/ Tairen/Tolhao/khangra.

Providing & fixing local best quality plain lining tongued & grooved on & i/c wooden plug complete with necessry screw & priming coat on unexposed surface (a) 19mm thick.

P/F 40 mm thick panelled, glazed or panelled & glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (ordinary type) with necessary screws .a) Local best quality Uningthou

Providing & fixing M.S. round or square bars at required spacings in windows frame of window and clerestory window.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with10mm dia bolts,nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

P/F MS Sliding door bolts with screws & nuts complete (a) 300X15 mm.

P/F Al Tower bolts with screws & nuts complete. (a) 250x10 mm

P/F Al Handles with screws & nuts complete. (a) 150mm

P/F Al Hookes & Eyes with screws & nuts complete.(a) 125mm

Providing & fixing 40 mm X 6 mm F.B. wind ties to G.I. sheet roof with hook bolts.

Supplying 40 mm X 3 mm X 275 mm F.B. twisted plate i/c cost of bolts & nuts.

50 mm cement concrete flooring 1:2:4 (1 Cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

Trepezoidal pre- painted profile sheet roofing of approved brand dyna roof or equivalent with selt driling srews of 68 mm long xylon coats screws with pvc washer and caps complete excluding the coat of purlin and truss. A) pre painted galvalume sheet (PPGL) (i) profile sheet 0.50 mm 4.2 kgs per SQM

Trepezoidal pre- painted profile sheet roofing for ridges /gutter or valley 610 mm wide approved brand dyna roof or equivalent fixed with selt driling srews of 68 mm long xylon coats screws with pvc washer and caps complete excluding the coat of purlin and truss. A) pre painted galvalume sheet (PPG) (i) profile sheet 0.50 mm 4.2 kgs per SQM

12mm cement plaster 1:3 (1 cement :3 coarse sand).

15mm cement plaster 1:3 (1 cement :3 coarse sand).

Applying one coat of cement primer of approved quality on wall surface

Finishing walls with water proofing cement paint of approved quality on new work(three or more coats) to give even shade

Applying ready mixed priming coat pink primer of appd. quality on wood work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood workof appd. quality in all shades on new work to give an even shade

Applying ready mixed priming coat (genuine red lead of appd. quality) on steel work

Painting (two or more coats excluding priming coat) with superior ready mixed paint for steel workof approved quality in all shades on new steel work to give an even shade.

P/F20 mm thick plank as eave board with b). Tolhao/Uchan wood

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap 10 litre low level white PVC. flushing cistern i/c flush pipe ,manually controlled device (handle level) conforming to IS 7231 with all fiiting and fixture complete i/c cutting and making good the wall and floor, wherever required: i) white vetreous china orissa pattern W.C pan of size 580 x 440 mm with integral type foot rests.

Providing and Fixing wash basin with C.I. brackets, 15mm dia cp Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White vitreous china Wash basin size 550X400mm with a 15mm cp Brass single hole basin mixer.

Providing and fixing 610 X 20 mm Diplomat brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws .

Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

P/F UPVC traps with 110mm inlet and 75mm outlet of self cleaning design with screwed down of hinged grating with or without vend arm complete i/c cost of cutting and making good the walls and floors.

P/F UPVC soil,wastew,rain water & vent pipe i/c all reqoisite fittings ,jointing of pipe & fitting with solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer in charge. (a) 110mm dia.

P/F UPVC soil,wastew,rain water & vent pipe i/c all reqoisite fittings ,jointing of pipe & fitting with solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer in charge. (a) 75mm dia.

Providing & fixing CI cover with frame for manhole and chamber. (a) 600x 450mm heavy duty ,38kg.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc.(Internal work) (a) 15mm Diameter.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including trenching and refilling etc.(external work).(a) 25mm diameter.

Providing and fixing brass stop cock of approved quality.(a) 15mm diameter.

Providing and fixing C.P. bib cock of approved quality. (a) 15 mm diameter.

P/F Brass full way G.M valve with C.I wheel of approved quality (a) 25mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.i)1000 litres net capacity storage tanks

P/F 1 HP tulu, single phase (CROMOTON) Pumpset with necessary fixtures complete.

IEI COMPONENT

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with piano type switch phenolic laminated sheet suitable size MS-box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X1.5mm2+1X1.5mm2 earth wire

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

2X10mm2+1X10mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing switch box/cover i/c connection etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

P/L 25mm2 four core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 16mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F brass batten/angle holder i/c connection etc.as reqd.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver 15 W 840 LHEAAGP6PL1W010 complete with connection as rqd. (Havell's)

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha or Similar)

S/F step type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan, making good the damaged, connection testing commissioning etc. as reqd.

S/F 12"(305mm) dia light duty exhaust fan complete with all accessories(usha/ Bajaj/ Orient)

S/F 12W LED bulb.

SITC 50W LED 5000K energy saving IP65 Flood Light Luminaries with high power COB LED as light source Havells LHEPBFUEIN6W050 complete with connection as reqd. (Havells)

Supply, Installation, Testing & Commissioning of solar LED street light with in built SCC system wattage of 30 W of Havell's make code no.LHSTAQU7AAGI030 with 3150 lumen system output, 120 Wp high efficiency crystaline solar SPV panel and100 Ah tubular lead acid battery and G.I.tubular pole of 6mt.hight. The solar charge conroller is of Microprocessor based MPPT make, and battery should be housed in a box made of galvanized steel and powder coated at a height of 3 mt. including connection and muffling of size 0.45x0.45x0.45 Cum top in c.c. 1:3:6 ( 1 cemt:3 c/sand: 6 stone aggrt of 40 mm n/size) including centering, shutturing, earth work etc.as reqd.

SITC 1500VA/500W power 24V DC system solar inverter with in-built charge controller, 2 nos. 250W solar PV module, 2 nos. 12V 150 Ah @ C10 Battery of 5 years life warranty with galvanised iron framing including connection etc. as reqd.

S/F bus bar chamber with 4 strips copper bus bar length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc.as reqd.

S/F wall/floor mounted metal board of welded constn.fabricated with minimum 50mm X 50mm X6mm angle iron frame work with horizontal and vertical intermediate members of suitable angle/flat iron for mounting of switch gear i/c painting etc.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 4 way

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size hylum fibre board complete with locking arrangement and painting etc.

Earthing with copper plate 600x600xmm thick i/c accessories and providing masonary enclosure with copper plate having locking arrangement and watering pipes etc.(but without charcoal and salt complete as reqd.)

Extra for using salt and charcoal for G.I.plates or copper plate earth electrode as reqd.

P/F 4.00 mm dia copper wire on surface or in recess for loop earthing as reqd.

Guigui Kamei

M Gunananda Sharma