Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.9 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹46.7 L+₹1.3 L (2.75%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹47.4 L+₹1.9 L (4.27%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹47.5 L+₹2.1 L (4.52%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹47.7 L+₹2.3 L (4.97%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
22 Aug 2022, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL VASEEM HIROLI
GE 859 EWS, PIN-913859, C/O 99 APO
SPL REPAIRS TO BLDG NO P/O/20 A TO H AT CHINDIT TOP ALONGWITH PROVN OF CERTAIN MINOR WORKS AT TENGA AREA OF AGE B/R I AND AGE E/M UNDER GE 859 EWS
2022_MES_542733_1
8352/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹89,000
Yes
13 Dec 2022
2 Aug 2022
23 Aug 2022
2 Aug 2022
22 Aug 2022
15 Aug 2022
Amount
Excavation over areas n exc 1.5m deep and getting out in hard /dense soil complete all as specified and directed.
Excavation in trenches not exc 1.5 m in width and 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.
Returning , filling including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
M&L for construction of 1.20 m dia x 3.00 m deep sokage well , excavation in hard/ dense soil, foundation PCC 1:3:6 wells of honey combed precast PCC block wall masonary including intercepting chambers, RCC cover slab, filling with brick bats complete all as specified in drawing and as directed.
Material and labour for providing plain cement concerete (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 160 mm on after they are laid and tested complete all as specified and directed.
M&L for 150mm dia SGSW pipes laid in trenches jointed in CM 1:1 and jointed complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and setting in CM 1:4 etc complete all as specified and directed.
Demolition of cement concrete in roofs, floors, beams, staircases, landing and similar works (other than ground floor) etc complete.
M&L for PCC 1:2:4 type B1 using 20mm graded stone agg as in roof padding finished even and fair .
M&L 10mm thick rendering in CM 1:4 on roof surfaces finished even and smooth without using extra cement using WPC @3% by weigh of cement. (Note : WPC will be measured and paid separately)
M&L for preparation of new plastered surfaces of roof surfaces and applying waterproofing treatment over smooth finished surfaces after application of cold applied bituminous primer @ 0.30 kg/Sqm and applying hot bitumen 85/25 @ 1.20 Kg/Sqm providing and laying APP polymer, modified, non-woven polyester mat, reinforced membrane, 3.00mm thick , weighing 3.5 Kg /Sqm with surface finish by torch application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying with one coat of bituminous based solar reflective aluminium paint @ 100 gms/ Sqm complete all as specified and directed.”
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level)
M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floorings, including finishing the surface even and smooth using extra cement.
M&L 3mm thick, 38mm wide glass dividing strips inserted in position to conform to design.
M&L for 25 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in floorings, as in sub base of floor tiles in ground floor complete all as specified.
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub base finishing the surface even and rough complete all as specified.
M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles.
M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles.
Dismantling ,floor hearth or wall tiling including cement mortar bedding (but not backing), hacking for key, scrubbing down with water etc.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding .18 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M & L for 450 x 350 x 6 to7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient/ Bell/ Johnson/ Somany).
M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile n exc 0.36 sqm in floors/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection surface finished even and smooth using with extra cement
M&L for PCC 75 mm thick in path PCC 1:2:4 type B1 using 20 mm graded stone agregate surface finished even and smooth using extra cement and making impression with expanded metal whilst the concrete is green.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for.
M & L for PCC 1:3:6 type C2, (using 40 mm graded stone aggregate) as in surface channels and drains.
Extra for forming fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc.
Material and Labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sunken floor complete all as specified and directed.
Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.
M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.
M&L for Mild steel TMT bars 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.
Formwork to chullah hoods,chajjas,troughs and similar items including edges with fair finish flat surfaces.
M&L for reinforced cement concrete 1;2;4 type B1 (using 20 mm graded stone aggregate) for slabs supported on walls , beams and columns, in floors , roofs, landings and in shelves ,chhajja's and the like complete with all necessary formwork etc all as specified and as directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10 cm wide for rough finished surface complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/ disintegrated rocks, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
Supply and fix rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of grade Fe-410 W (gde-E-250) Quality -A complete all as specified and directed.
Demolition of stone slabs or tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc
M&L for 18 to 20 mm thick marble work (table rubbed and polished) in steps and cooking platform and like in cm (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade.
Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar.
M&L for precast cement concrete 1:3:6 type C1 using 20 mm graded aggregate block solid building blocks or slabs in not exc 10cm thick (with plain or interlocking joints as directed ) complete set in CM 1:4.
Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc.
M & L for 15 mm thick rendering in cement mortar 1:4 on one side of lathing finish even and smooth without using extra cement.
M & L for 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement.
M & L for 5 mm thick plaster in cement mortar 1:4 on brick or concrete as in ceiling all as specified.
Supply only integral water proofing compound.
Taking down of CI soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings.
S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm bore.
S&F PVC (SWR) bends any radius, 110mm bore.
S&F PVC (SWR) bends any radius, 110mm bore with access door.
S&F PVC (SWR) bends any radius, 75 mm bore.
S&F PVC (SWR) bends any radius, 75 mm bore with access door.
S&F PVC (SWR) junction single, (single T) equal or unequal with access door 75mm bore.
S&F PVC (SWR) vent cowl 110 mm bore.
S&F PVC (SWR) reducers 110 x 75mm bore.
S&F PVC (SWR) couplers 110mm bore.
S&F PVC (SWR) WC connector 110mm bore lip ring.
S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement.
Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store.
Disconnecting existing water tanks setting aside for repairs,cleaning and re-using of tank capacity exc 250 ltr but not exc 500 ltr.
S & F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified.
Fixing only PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified.
S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified.
Fixing only ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified.
Taking up or down 15 mm bore steel water tubing and connections including clfor refixing or removal to store
S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.
Refixing 15 mm bore old steel tubing and conncetions in new or old position to walls and ceiling with new fittings coplete all as directed
Taking up or down 20 mm bore steel water tubing and connections including cleaning or refixing or removal to store
S&F 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.
Refixing 20 mm bore old steel tubing and conncetions in new or old position to walls and ceiling with new fittings coplete all as directed
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia.
S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.
Supply and fix brass CP fancy type piller tap,for wash hand basin screwed for iron pipe 15 mm bore,complete all as specified and directed.
Supply and fixing in repair vitreous China squatting pan, "Orissa" pattern size 580 X 440 mm, white, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and complete
S & F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete. (Make: Hindware /Parryware /Cera /Commander)
S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe.
Taking down carefully and refixing 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe.
S&F in repair 15 mm dia stop valve external threaded,cast coppper alloy ,screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipe or for uninos.
S&F in repair 15 mm bore chromium plated fancy type stop cock with long shank and cup(concealed type).
S & F in repairs 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.
Re-Fixing only in repair 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified.
S&F mild steel hat pegs, set of 6 no's , solid body,40mm to 75 mm long in size, with mild steel plate fixed to wall with the help of 35mm long screws, complete all as directed
S & F in repair brass chromium plated shower rose 125 mm dia with swivel joints including fixing to steel pipe or union.
S&F stainless made of stainless steel 1.00 mm thick kitchen sink with plug washers, wastes;including bedding in cement mortor on dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 x 420 mm with bowl size 410 x 330 x 160mm, complete.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm.
All as per item No 90 above but area not exc 1.50 Sqm.
Taking down shutters of any description exc1 sqm but n. exc 2 sqm each
Taking down shutters of any descriptions exc 1 sqm but n exc 2 Sqm each and refixing in the same opening after repair.
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat mouleded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rain, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supling & fixing in the frame at site as per specification & drawing.
M&L cutting holes exc half brick but not exc one brick in brick walls built in Cement mortarM or Cement lime mortor and stone walls built in lime mortar.
S & F 2nd calss hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete.
S & F mild steel bands, straps, clamps, hold fasts, wall ties and similar articles conforming to Fe-310-0
S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.
S & F 25 mm thick flush sutter ,solid core construction, with block board core and plywood face panels,commercial type on both sides.
S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer.
S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc
S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc. all as specified as directed.
S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.
S& F Mild steel barrel tower bolts 150 mm long of extruded section and fixed
S & F 150mm size Mild steel pressed handles ,oval type,stove enamelled black.
S & F 75 mm size mild steel butt hinges medium weight cold rolled and fixed.
S& F Mild steel barrel tower bolts 100 mm long of extruded section and fixed.
S & F 100 mm size Mild steel pressed handles ,oval type,stove enamelled black.
S & F in repair aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece.
S&F in repair hasp and staple 125 mm safety type, aluminium anodised fixed with screws.
S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed”
S & F sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beads in squares n exc 0.50 Sqm in each pane.
S & F 3mm thick figured glass, pin head glazing with oil putty /wooden beads in squares n exc 0.50 Sqm in each pane.
S & F GI steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
M&L for II nd CL HW plain fillets,square,rectangular or triangular in sec wrought secured with nails or brads.refixed in old position sectional area exc 3 sqcm & not exc 6 sqcm.
Material and labour for prelaminated particle board 18/19 mm thick, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work as in shutters for kitchen shelves/cupboards fixed in repairs.
S&F continuous hinges (Piano) hinges,30mm brass,brighgt finish or electro galvanised.
S&F Ball catches with 8mm dia steel ball , and brass body and striking plate including letting in and fixed.
M & L for preparing new wooden surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
Material and labour for preparation of old surface of wood and wood based materials over 10 Cm width or girth and applying one coat of synthetic enamel paint as directed and specified.
Material and labour pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of shade / colour as approved by Engineer-in-Charge having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. Make : Tata/ JSW/ Dynaroof (Spectrum)/ DuraRoof/ Prestar
M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces.
M&L for preparation and painting to steel surfaces with two coats of SEP over a coat of red oxide zinc chrome primer of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint.
M & L for applying one coat of synthetic enamel paint to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of old steel surfaces.
Preparing newly plastered surfaces of walls and applying three coats of white wash.
Material and labour for complete removal of existing treatment of new plastered surface and applying two coats of distemper oil emulsion over a coat of 3 mm thick wall care putty all as specified incl preparation of surfaces.
Material and labour for old plastered surface and applying two coats of distemper oil emulsion all as specified incl preparation of surfaces.
Preparing old plastered surfaces of ceiling and applying one coat of white wash.
Preparing newly plastered surfaces of ceiling and applying three coats of white wash.
M&L for complete removal of existing treatment and appling two coat of cement base paint on new wall surface complete all as specified.
Preparing old plastered surfaces and applying Two coats of cement base paint on wall surfaces.
S&F soap dish,any type,fixed to plugs with chromium plated brass screws.
S&F CP towel rail,fixed with to plugs with chromium plated brass screws.
S&F PTMT Towel ring,fixed with chromium plated brass screws.
Supply and Fix in repairs plate rack made of stainless steel 0.50mm thick,over all size 762mm(H)x787mm(W)x254mm(D) complete all as specified and directed.
Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.
Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturbed surface/ portion of the wall etc. complete all as specified and directed.
Taking down sub main wiring/service cable of any type and any size and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.
M&L for point wiring with PVC insulated unsheathed stranded copper conductor, FRLS grade of size 1.5sqmm in and including PVC casing capping of required size surface type with all accessories including PVC for housing /mounting brackets, switches, sockets etc including 1.5sqmm PVC insulated unsheathed stranded copper conductor 1100 volts grade green in colour as earth continuity for one light/ fan point controlled by one switch all as specified and directed.
All as per item No 141 above but one exhaust fan point.
All as per item No 141 above but one call bell point.
All as per item No 141 above but one light point controlled by two way switch.
All as per item No 141 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the independent board complete all as specified and directed.
All as per item No 141 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the same board complete all as specified and directed.
All as per item No 141 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 4.0 sqmm 1100 volts FRLS grade and earth continuity wire 4.0 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed.
Supply and fix switch piano flush type single pole one way 5 Amp 240 volts complete all as specified and directed.
Supply and fix switch piano flush type single pole two way 5 Amp 240 volts complete all as specified and directed.
S&F switch socket outlet 2 in 1, 3 pin, 5 amp, 240 volts.
Supply and fix switch socket combination 3 Pin, 5 Amp, 240 volts complete all as specified and directed.
Supply and fix switch socket combination 5 Pin, 15 Amp, 240 volts complete all as specified and directed.
S&F Bell push, flush type, 5 A, 240 V.
S&F Bell ding dong type, AC, 240 V, single pole.
S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed.
S&F 1x10 watt LED lamp Cat No. LHLDEUEEML8RO10 of Make Havells or equivalent Model of Makes specified in PS here-in-after.
S&F LED light fitting 1x9W/1x10W bulkhead luminaire including LED light driver holder connecting up with driver holder and connecting up with three core flexible copper connecting cable of suitable size from ceiling rose complete all as specified and directed by Engr in Charge. Make Crompton Greaves or equivalent model of Make Bajaj / Phillips/ Havells/ Eveready
Supply and fix sheet metal enclosures for DBs (Double door type) when MCB SPN 8 way with 200 Amps rated bus bar complete all as specified and directed.
S&F MCB SP, 6 to 32 Amps, 240 volts, 'C' series, complete all as specified and directed.
S&F MCB SP&N , 32 Amps, 240 volts, 'C' series, complete all as specified and directed.
Supply and fix sub main wiring with two single runs of single core 6 Sqmm PVC insulated and unsheathed cable with multi stranded copper conductor FRLS grade on surface or recessed or drawn in PVC casing capping along with 4.00 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed. (Note: One run of PVC casing capping ,one run of 4 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.)
S&F LED light fitting 1 x 20 watt, 220 V AC decorative box type with driver, holder incl LED tube light connecting up with three core flexible copper conductor cables of suitable size from ceiling rose complete all as specified and directed.
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 25x3 mm dia GI strip by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe 40 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion.
M/S ASHOK CONSTRUCTION
M/S SM ANSARI
M/S DK TRADERS
M/S DKT CONSTRUCTION
D.P. Traders
M/S POLAR AGENCIES
M/S R N ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .