Construction of building for Ambattur Fire and Rescue Service Station and Ambattur District office in Chennai Suburban District under CM Announcement Scheme for the year 2021-2022

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

7.2) Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1) Filling with Excavated Earth

21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3m

b. T.W. below 2 m length.

23.3) S & F of Magnetic door catches

25) M.S.Holdfast

30) Ellispattern

31) Weathering course

37.1) White washing 3 coats (slaked)

39) M.s Grills

40) Painting - New "wood work"

41) Painting - New "iron work"

46) S & F 20 mm dia Alu. Hanger Rod

47) S & F Alu Towel rail 75cm long

48) S & F 5 pin Coat stand

49) S & F chromium plated 8 gauge Picture Hook

50.3) Supply and planting avenue trees

50.4) Providing Tree guard

52) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with PVC Specials (Above Ground level) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)

53.3) C.I. Steps ( 5 kg)

63) 32 mm dia PVC waste pipe

Electrical arrangements 69) 15 Amp. Power plug

72) Box type Fibre Fan hook

74) Charges for fixing of "Fan"

76) 8 SWG wire

77.3) S & F of TV/Telephone line Socket

77.4) S & F of 20mm dia PVC pipe for TV/Telephone line

78) Earthing Station IS3043 (Type I)

86) Anti termite treatment

112) S & F of Exhaust Fan 300 mm dia

238) Anticorrosive treatment for steel grills

ANNEXURE 1.9.3.5) Bored cast situ piles installation of vertical cast in Situ Bored piles of following dia using Standardised concrete Mix M30 Grade b). 450mm dia

1.9.4.1) Chipping of RCC pile head to the required cut of level and clearing away debries with an average lead of 3 km entirely with city limits b.) 450mm dia

1.9.5) Mobilization charges including transporting to site

1.9.6) Conducting routine vertical compression load test

2.1.1) Filling C.S. sand

2.15) Supplying and filling stone dust

3.1.3) C.C.1:5:10 for Foundation & Basement

3.2.1) P.C.C. 1:2:4 for Foundation & Basement and other similar works

6.2.3) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

8.2.3.2) Standardised concrete Mix M30 Grade Concrete a. In Foundation and basement

8.2.4.2) Standardised concrete Mix M25 Grade Concrete b. Stilt / Ground Floor

c. In First Floor

d. In Second Floor

e. In Third floor

f.In fourth floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor / Stilt floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

10.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) a. In Foundation and basement

b. In Ground Floor/stilt floor

c. In First Floor

d. In Second Floor

e. In Third Floor

11.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

14.3.I) Precast Cupboard slab 20 mm tk.using standardised concrete mix M25 a. In Stilt / Ground Floor

b. In First floor

c. In Second floor

d. In Third floor

14.3.II) Precast Cupboard slab 40 mm tk.using standardised concrete mix M25 b. In Stilt / Ground Floor

c. In First floor

d. In Second floor

e. In Third floor

18.1) Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

f.Curved surface

18.9) Double centering portico area

21.5.2.2) Supply and Fixing Solid UPVC door Shutter with frame

21.5.6.1) Supplying and fixing of solid core flush door shutter of thickness 35mm a). Door size 1.000 m x 2.100 (Single Leaf)

b). door size 0.900 m x 2.100 (Single Leaf)

21.5.6.2) Supplying and fixing of solid core flush door shutter of thickness 35mm b) Door size 1.50m x 2.10m (Double leaves)

21.6.1.4) R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using M30 grade (without vibrating charges) a. 900 x 2100 mm

22.1.8) TW panelled single leaf door shutter with brass fittings. a. 1000X2100mm.(Single leaf).

22.3.3) T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

22.3.9) T.W. frame & TW styles & rails with BWR double leaf shutters for SPECIAL cup board/ ward robes including two coat enamel paint & one coat primer.

26.1) Flooring in C.C.1:5:10

28.1) Floor plastering in C.M. 1:4, 20mm tk.

29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound

33.2) Plastering in C.M. 1:5, 12mm tk

35.3) Spl. Ceiling plastering in C.M. 1:3, 10mm tk.

36.1) Cement mortar Border in C.M.1:5, 12mm tk. a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.4) Two coat of cement paint over one coat white cement

43.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.3.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit

b) Augering 30cm dia

44.5.5.1) Providing Rain Water Harvesting well ring circular shape of 90cm dia, 60cm depth,50mm thick using M25 grade concrete including steel fabrication.

44.6) PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm

50.5.1) Supplying. Fabricating and erection of M.S Scheme Name board

50.6.1) Precast slab 50 mm tk.in C.C. 1:3:6 with fibre

52.2.1) Supply ,laying & jointing the following UPVC pipes as per ASTM D 1785 of schedule 40 with UPVC Specials (Above G.L) a. 40 mm dia

52.2.2) Supply, laying, fixing and jointing the following UPVC pipes as per ASTM D-1785 of schedule a. 40mm dia UPVC pipes (below Ground level)

52.9) Supply and fixing of following dia MS clamp set including transportation charges. a) 40mm dia M.S clampset

53.4) S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5) Wash Hand Basin of size 550 x 400mm (White without Pedestal)

54.1.1) S & F of 15mm dia half turn CP long body tap

54.2.1) S & F of 15mm dia half turn CP short body tap

56.3.2) S & F of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

56.4.2) S & F of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.1) S & F of E.W.C. (White) 500 mm with PVC SWR grade "P" or "S" TRAP

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1) Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm

60.1) PVC Nahani trap (4way/2way)

61.3) UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1) PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

b. 160 mm dia PVC bend

62.2.1) PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

b. 160 mm dia PVC Equal tee

64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point

66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself

68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places..

68.3.2) Wiring for lift well light point and socket outlet with 2 x 1.5 sqmm FRLS PVC insulated stranded copper conductor of 1100V grade along with 1 x 1.5 sqmm FRLS PVC insulated stranded copper conductor cable

71.2) Supplying and fixing of 32 AMPS Triple pole main switch

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Electronic Dimmer

77.5) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

78.4) Earthing as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 40mm RCC cover / CI cover slab for the brick masonry

80.2) 450 x 375 x 20 mm thick TW plank

82.3) Supply and fixing of LED road way lightiing luminaries b) 30W LED

84.3) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

93.1.1) Plastering with CM 1:3, 12mm with WPC

96.2.7) Supply and Laying Rubber Moulded Hydraulic Pressed Paver Block 83 mm thick including labour charges for laying.

98.5.1) TW double leaves shutter of size with brass fittings a.1800 x 2400mm

107.3) Run off 4 Wires of 10 sqmm PVC insulated single core multi strand

144.2.1) Supplying and fixing of 250 Watts Metal halide Flood light.

156) Supply and erection of 125 Amps capacity floor mounting / wall mounting panel board

171.1.2) Labour charges for the erection of submersible pumpset in borewell/ openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth. Upto 5HP

171.2.8) Supply and Delivery of Submersible motor Pumpset with ISI mark IS 8034/2002 without Panel Board a) 50LPM x 100m (Three phase)

171.2.9) Supply and Delivery of Three phase Openwell Submersible motor Pumpset with ISI mark IS 14220/2002 without Panel Board of capacity a) 50LPM x 50m

175.1.5) Supply and fixing of triple pole and neutral four way 7 segment 3 tier compartmental type MCB distribution board

175.2.3) Supply and fixing of 4 way triple pole and neutral MCB sheet steel enclosure

180.1.1) Providing and fixing 25mm x 3mm copper flat on surface or in recess for connections as required

180.1.2) Providing and fixing 25mm x 6mm copper flat on surface or in recess for connections as required for alternator neutral

180.1.4) Supply and run of 2 of No.8 copper wire for earth connections

184.2.2) Supply and fixing of 2 x 2' square type recessed / surface mounted fitting with 36 W LED bulbs and with necessary connection (higher end))

184.2.3) Supply and fixing of 75 W mid bay LED luminaire on the main portico with necessary internal connections.

206.5) Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x595 x15mm having volume density 270 kgs / m3, weight 4kg / m2

207.3.1) Providing two coats of Plastic Emulsion paint including primer for inner walls

207.3.8) Providing two coats of Exterior Emulsion paint including primer for outer walls

213) Supply and fixing of SFRC manhole cover a. 600mm x 600mm

238.1) Anticorrosive treatment for window grills

255.6.2) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

255.7.2) Supply and fixing of LED bulb suitable for fixing it to pendent / backlite battern holder a) 9 watts LED

b) 12 watts LED

344.2) S & F of Bevelled edge mirror 500 x 400 x 5.5mm

359.3.2) Concrete designer tiles flooring

361.6) Vitrified Tiles flooring (Ivory)

365.1) Supplying and fixing stainless steel hand rails

367.1) Providing wooden Melamine polish for new wood work

379.7.1.1) Providing PVC trim beeding of suitable size & colour for corner of wall tiles

379.8.2.3) Supplying and laying of Granite tiles using 10mm thick for Flooring in CM 1:3, 20mm tk (Ruby red)

379.8.7.2) Granite Tile wall cladding using 10mmtk (Sinthetic Grey) tile in C.M 1:2, 10mm tk .

382.1) S&F of Cuddapah sink 600 x 600 x 200mm

450) Supply and fixing of 160 mm dia PVC end cap for borewell

450.6) Supplying and fixing of CP wall mixer two in one (without telephone shower).

450.9.2) Supplying and fixing of CP shower arm with overhead shower rose

451.1) Supplying and fixing of CP angle valve stop cock.

451.1.1) Supplying and fixing of Geyser

451.2) Supplying and fixing of angle cock

455) Supply and fixing of Health faucet approved quality with ISI mark

504) Supplying and delivery of 12 mm thick nylon rope

513.1) Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe.

532.2) Providing one coat of Wallputty for new plastered surface

540.1.6.2) Supply & Installation of 3 star rated Air- Conditioner with copper coil including cost of 3m copper tube and fixing charge etc a. 1.5 TR Split Type AC unit

540.1.8.1) Supply and fixing of AC drain pipe

540.1.9.1) Supply and Installation of 4KVA Capacity Automatic Voltage stablizer with time delay relay (V- Guard/ Equivalent)

540.2.1) Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metrs supplied with AC unit)

609.6.1) Supply and delivery of 150mm OD PVC casing pipes (6kg/cm2) as per IS 12818/1992 of approved quality for borewells

609.6.2) Supply and delivery of 150mm OD PVC Ribbed screen pipes (6kg/cm2) as per IS 12818/1992 of approved quality for borewells

609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) a) 150mm dia PVC casing pipes assembly.

615.3.2) Supplying, delivery and fixing of MS fabricated DOL panel control board with ISI mark for three phase a) 4 HP

615.3.5) Supplying, delivery and fixing of 1.5 HP MS Fabricated DOL panel control board with ISI Mark for single phase

616.4.3) Supplying and fixing the following dia HDPE pipes of approved make a. 40 mm dia HDPE 10 Kg/cm2 pipe

619) Supplying and fixing of following plumbing fittings / specials confirming to I.S Specifications a. 50 mm dia GM non return valve

b. 50 mm dia GM Gate valve

c. 50mm dia GI union

d. 50mm dia G.I.pipe

e. 50mm dia G.I.bend

f. 50mm dia G.I.coupling

707.3.2) Supplying and laying 3 core 4 sqmm flat type copper cable with ISI mark including cost of all materials and specials.

724.5) Supply and clamping of following PVC armoured LTUG cable (Above Ground level) a) 3.5C x 120 Sqmm PVC armoured LTUG cable

b) 3.5C x 70 Sqmm PVC armoured LTUG cable

724.6) Supplying and laying of following size PVC armoured LTUG cable (Below Ground level) a) 3.5C x 120 Sqmm PVC armoured LTUG cable

b) 3.5C x 70 Sqmm PVC armoured LTUG cable

724.7) Supplying and fixing of brass cable gland suitable for a) 3.5C x 120 sqmm PVC armoured LTUG cable

b) 3.5C x 70 Sqmm PVC armoured LTUG cable

724.8) Supplying and fixing of cable end termination suitable for a) 3.5C x 120 sqmm PVC armoured LTUG cable

b) 3.5C x 70 Sqmm PVC armoured LTUG cable

741.8) Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in Flush with wall with earth connection (For AC Plug) Legrand (MDS) / Hager (L& T) Equivalent/ Superior variety

788.1) Supply and clamping of 4 core 2.5sqm PVC sheathed and armoured copper cable

799.1.1) Drilling of 150mm dia borewell anywhere including transportation from one place to another place in alluvial soil or sedimentary starta mud circulation method a) Drilling of borewell in upto 60m

799.1.2) Drilling of 150mm dia vertical bores in hardrock formation to any required depth using "DTH Rig" (a) Drilling of borewell upto 60m

799.2.1) Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officers. a) Reaming of borewell in upto 60m

799.3.1) Charges for developing the borewell for the entire depth with air compressor of 300cfm capacity [Minimum 8 hours]

832.5.2) Supplying and fixing in position of UPVC window of casement type( open) for all sizes

832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

943.2) Providing safety equipments: CO2 fire extinguisher : 1 No.; 9 ltrs capacity fire buckets: 3Nos., & rubber mat : 1 No.

958) Providing 13 persons passengers lift car size (1300 x1350mm) Gearless Lift without Machine Room.

960.2) Providing suitable foundation for accomodating the 62.5 KVA DG set.

960.3) Supply, installation, testing and commissioning of 62.5 KVA Diesel Generator set complete with all accessories (with AMF panel)

960.3.1) Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets)

960.3.2) Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator.

960.3.3) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer complete.

960.3.4) Supply and installation of MS exhaust pipe of suitable thickness with 125 mm dia complete with MS wall / ceiling support, etc.

960.3.5) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool as per IS 3677 / 1973 reinforced with chicken mesh and cladded with aluminium sheet of 26 SWG and 50mm thick with 64 Kg/Cu. Mtr. Density.

960.3.6) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water entry to exhaust pipe with provision of drain plug in the system.

960.3.7) Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval for the same, arrange for the inspection by the Electrical Inspectorate / CEA Officials and obtain safety certificate from them for commissioning the DG set

960.4.5.1) Supply and fixing of 4' 18 watts LED Tube Light (Crystal glass)

961) Supplying and fixing of Aluminium TNPHC Emblem of 18" height

961.1) Supplying and fixing of following height aluminium letters a) 12" height aluminium letters

b) 9" height Aluminium letters

961.2) Supply and fixing of plastic foam name plate with vinyl cutting letter with approved colours etc., complete as directed by the departmental officers a) 20"x 5"

K BASKARAN

P GANGADARAN

PTM PROJECTS PVT LTD

Bidder Name

PTM PROJECTS PVT LTD

K BASKARAN

P GANGADARAN

EEE PEE S AND CO